Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
General Relativity
General Relativity
leonrubino@yahoo.it
per www.fisicamente.net
Maggio 1993 Rev. 00
Giugno 2011 Rev. 01
Agosto 2011 Rev. 02
Indice:
-Indice.
-Introduzione.
Pag.1
Pag.2
Pag.4
Pag.4
Pag.7
Pag.10
Pag.17
Pag.17
Pag.19
Pag.24
Pag.25
Pag.28
Pag.29
Pag.30
Pag.30
Pag.31
Pag.33
Pag.33
Pag.35
Pag.35
Pag.36
Pag.37
Pag.38
Pag.40
Pag.42
-APPENDICI.
Appendice 1: La Teoria Della Relativit Ristretta.
Appendice 2: Come io vedo lUniverso (Unificazione Gravit Elettromagnetismo).
Pag.45
Pag.45
Pag.70
-Bibliografia.
Pag.87
Introduzione.
La Teoria della Relativit Generale (TRG) unestensione della Teoria della Relativit
Ristretta (o Speciale) (TRR) esposta in App. 1, necessaria ad Einstein per spiegare la
Gravitazione. Il termine gravit richiama il termine accelerazione; vedremo infatti al Par.
2.1 che, laddove coi sistemi di riferimento c accelerazione, rotazione e gravit, la metrica
non pi semplice come nella TRR.
Inoltre, la TRG spiega la gravit come una curvatura dello spazio, o meglio, dello spaziotempo (spazio-tempo matematico, nellopinione di chi scrive) determinata dalla materia (e
dallenergia!) immersa in tale spazio-tempo. E un po come quando, ad esempio, si pone
una sfera di piombo su un materasso: in prossimit della sfera si ha uno sprofondamento
ad imbuto e in tale zona il materasso appare incurvato. Potremmo dunque dire che tale
area di materasso incurvato il campo gravitazionale della sfera di piombo. Se ora
lanciamo un pallino sul materasso, lo stesso, attriti a parte, proceder, indisturbato, di
moto rettilineo uniforme sul materasso piatto, finch, avvicinandosi allarea incurvata e
sprofondata, non inizier ad accelerare (cadere) verso la sfera di piombo.
La materia, nella TRG, ha lo spazio-tempo come binari su cui muoversi; se dunque questi
vengono incurvati, le traiettorie seguite dalla materia saranno curve.
Se poi la sfera cos massiva da sprofondare completamente nel materasso, allora
limbuto diventer una sacca strozzata, ci che chiameremmo buco nero, e dalla stessa
non uscirebbe pi neanche la luce.
In TRG vale poi il Principio di Equivalenza, secondo cui un campo gravitazionale pu
essere annullato da una accelerazione e non dunque possibile distinguere, in senso
assoluto, una accelerazione da un campo gravitazionale. Si immagini infatti lAscensore di
Einstein, in cui una persona ferma ad un piano grava ovviamente sul pavimento
dellascensore col suo peso; se per tagliamo il cavo dellascensore, questo inizier a
trovarsi in caduta libera nel campo gravitazionale terrestre e luomo allinterno gallegger
come in unastronave priva di gravit, poich lui cade e lascensore pure e il pavimento di
questultimo gli sfuggir sempre da sotto i piedi. Dunque, una accelerazione, quella di
caduta, ha annullato leffetto della gravit; e contemporaneamente, ad ascensore fermo,
la persona allinterno, invece di concludere che era fermo e sospeso in un campo
gravitazionale (gravando coi piedi sul pavimento) poteva anche concludere che non vi era
nessun campo gravitazionale, ma che lascensore stava accelerando verso lalto, spingendo
sotto le suole delle sue scarpe.
Con lesempio del materasso abbiamo introdotto il concetto di curvatura dello spaziotempo (matematico) causato dalla materia/energia. Lequazione tensoriale, che noi qui
dimostreremo, che esprime appunto la corrispondenza tra materia/energia e curvatura
lEquazione tensoriale del Campo Gravitazionale di Einstein:
1
g R = 8GT
2
Forse solo nellopinione di chi scrive (in quanto il concetto che segue, cos come tante altre
cose, non lho mai letto su nessun libro) anche lequazione di Newton sul campo
gravitazionale esprime una corrispondenza tra caratteristiche geometriche dello spazio e
presenza di materia:
r
r d 2r
r
Mm
a = 2 , ma = G 2 r ,
dt
r
2r
d r
M
2 = G 2 r
dt
r
r
d 2r
infatti, il primo membro dellultima equazione, ossia
, ossia la derivata seconda della
dt 2
posizione spaziale nel tempo, appunto una caratteristica geometrica dello spazio, mentre
M
il secondo membro G 2 r ci informa sullentit di M!
r
Sin dalla sua nascita, ufficialmente nel 1916, la TRG sempre stata vista da molti con
perplessit, in quanto in essa la complessit, sia matematica che concettuale, non manca
proprio e dunque sostenere che cos tante ipotesi e cos tanti calcoli conseguenti possano
portare ad equazioni che siano sempre ben salde alla realt, qualche volta ha portato pi
di qualche critico a definirla una teoria un po azzardata (weird, in inglese).
I tests classici del Cap. 4 sono incoraggianti in senso opposto, anche se pure l le
premesse, le supposizioni ed i calcoli non scarseggiano e poi, ad esempio, nel calcolo della
deflessione della luce delle stelle ad opera del Sole, durante una eclissi nel 1919, la
precisione di misura forse era parecchio vicina al valore misurato. Ed esistono poi
spiegazioni alternative ed antagoniste alla TRG per spiegare deflessione della luce e
precessione del perielio dei pianeti.
Nellopinione di chi scrive, la TRG sicuramente una splendida e meravigliosa teoria fisico
matematica, pi matematica che fisica, forse la pi bella che c, ma altrettanto vero che
contiene profili appunto un po azzardati. Penso che la TRG sia la classica teoria
falsificabile alla Popper, un po come un modello interpretativo che va bene per spiegare
parecchi fenomeni, ma che per non lessenza piena del fenomeno spiegato. E poi,
supposta la realt dellinterpretazione geometrica della curvatura, resterebbe da spiegare
come mai la materia la causa; s, la causa, ma perch? Constatare non equivale
pienamente a spiegare ed a giustificare ed a rendere plausibile.
Nella TRG la gravit solo attrattiva ed Einstein, nella sua Teoria dei Campi Unificati,
riassumendo un po, dopo aver utilizzato il concetto di curvatura in TRG per spiegare
lattrazione gravitazionale, utilizz il concetto di torsione per tentare di spiegare anche le
forze repulsive dellelettricit. Purtroppo senza successo, ossia senza che le sue nuove
equazioni del campo unitario (mi pare 33) trovassero un qualche riscontro nellUniverso
reale. Il lavoro di Einstein, dunque, non si esaur con la TRG; egli, infatti, mor nel 1955 in
un letto dospedale con carta e penna in mano!
Io, personalmente, penso che la forza di gravit sia una macroscopica forza che si
compone di microscopiche forze elettrostatiche tra le particelle, positive e negative, che
compongono lUniverso, e che possono considerarsi distribuite in modo random (vedi App.
2). Infatti, dimostro in Appendice 2 che lenergia elettrostatica corrispondente ad un
elettrone in una coppia elettrone-positrone, che :
1 e2
4 0 re
la sfera ed il cerchio:
Con riferimento alla figura 1, vogliamo rappresentare con una formula la superficie di una
z
sfera :
P(r, , )
In coordinate cartesiane, basta usare il Teorema di Pitagora per ottenere tale formula:
x2 + y 2 + z 2 = r 2
(1.1)
Invece, verso le pi maneggevoli coordinate sferiche, si ha, molto banalmente ed
intuitivamente:
r
= (r cos sin ) x + (r sin sin ) y + (r cos ) z
(1.2)
r
dove ovviamente il vettore che descrive (muovendosi) tutta la superficie della sfera.
Si vede che le componenti sono funzione di due parametri ( e ).
Ovviamente, nel caso pi semplice di un cerchio , si avrebbe:
r
= (r cos ) x + (r sin ) y
(1.3)
e qui si vede che invece le componenti sono funzione di un solo parametro ( ), se r=cost.
y
P(r, )
r
y
r
A (u )
r
B (u )
r
r
r
r
Con riferimento alla figura 1.3, se B (u ) tende a A (u ) , allora (u ) , diverr un d (u ) ;
r
non solo; esso corrisponder allarco infinitesimo dl su . Possiamo dunque scrivere che:
r
r
dl = d (u ) , da cui:
l=
dl
l ( A B )
l ( A B)
(u ) =
'
l ( A B)
(u ) du =
l ( A B)
[(
d 1 (u ) 2 d 2 (u ) 2
) +(
) ])du = (1 + f '2 ( x ))du
du
du
l ( A B )
(1.7)
r
e notiamo, altres, dalla composizione vettoriale di Fig. 1.3, che d (u ) risulta essere
tangente a , in quanto la tocca in un solo punto, e dunque il vettore
r
r d (u )
t =
du
un vettore tangente a .
(1.8)
r
d
dv
risultato ancora un vettore che ortogonale ai primi due, allora, per ottenere il vettore
r
r
d
d
normale alla superficie , effettuo il prodotto vettoriale tra
e
e se poi voglio il
du
dv
versore n (modulo unitario) divider per il modulo del vettore normale:
r
r
d d
dv
(versore normale)
(1.10)
n = du
r
r
d d
du
dv
Per quanto riguarda larea di una superficie (in generale) curva, sappiamo dalla geometria
elementare che larea di un trapezio data dal prodotto dei due lati per il seno dellangolo
da essi formato e ricordando la definizione di prodotto vettoriale riportata qui sopra,
r
r
d
d
possiamo allora dire che lareola d individuata dai due vettorini
e
(Fig. 1.4) :
du
dv
r
r
d d
d =
dudv
(1.11)
dv
du
u v
Par. 1.2: Geometria differenziale di base.
b(u )
t(u )
P (u )
(u )
n (u )
r
r
d (u ) r
Abbiamo visto con la (1.8) che il vettore t (u ) =
= ' (u ) tangente alla curva (u ) .
du
Volendo noi un versore t (modulo unitario), avremo:
r
' (u )
t (u ) = r
' (u )
(versore tangente)
(1.12)
Quindi, sempre con la (1.8) abbiamo visto che loperazione di derivazione fornisce un
vettore ortogonale.
Deriviamo ora la (1.12), ottenendo il versore normale n (u ) :
d
t (u ) (versore normale)
(1.13)
du
Per ultimo, definiamo il versore binormale b(u ) , ovviamente nel seguente modo,
utilizzando il prodotto vettoriale:
n (u ) =
(1.14)
r
' (u )
t (u ) = r
' (u )
d
t (u )
(triedro fondamentale con parametro generico u)
du
b(u ) = t(u ) n(u )
n (u ) =
(1.15)
ds
s ( A B )
s ( A B )
(u ) =
'
s ( A B )
u r
(u ) du = ' (u ) du
u0
(1.16)
ds r
= ' (u ) .
du
Se ora nel triedro (1.15) effettuiamo un cambio di parametro (u >>> s, con s parametro
intrinseco), si avr: r
d (u ) du r
r
r
1
' ( s ) = ' [u ( s )] =
= ' (u )
, da cui:
du ds
s ' (u )
r
' (u )
r
' (s ) =
= 1 . Poi:
s ' (u )
da cui: s ' (u ) =
r
r
r
du
du r
du
' ' (u ) s ' (u ) ' (u ) s ' ' (u )
' ' (u ) ' (u ) s ' ' (u )
r
ds
ds =
ds
' ' ( s ) =
(s ' (u ))2
(s ' (u ))2
ed otteniamo cos il triedro fondamentale nella parametrizzazione intrinseca:
r
t( s ) = ' ( s )
r
' ' (s )
n ( s ) = r
' ' (s )
r
r
' ( s ) ' ' ( s )
b( s ) = t ( s ) n ( s ) =
r
' ' (s )
b( s )
t( s )
P (s )
(s )
n ( s )
(1.17)
(1.18)
il RAGGIO DI CURVATURA.
Esempio del cerchio (sul piano x-y):
x2 + y2 = r 2
(z=0)
s
s
x = r cos = r cos( ) , y = r sin = r sin( ) , z=0 (dove s = r larco di circonferenza),
r
r
r
s
s
dunque: ( s ) = ( x, y, z ) = (r cos( ), r sin( ),0) da cui:
r
r
r
d ( s )
r
s
s
' ( s ) =
= ( x ' , y ' , z ' ) = ( sin( ), cos( ),0) e dunque:
ds
r
r
r
d ' ( s )
r
s 1
s
1
= ( x' ' , y ' ' , z ' ' ) = ( cos( ), sin( ),0) , da cui, ancora:
' ' ( s ) =
ds
r
r r
r
r
1
' ' ( s ) = x ' '2 + y ' '2 + z ' '2 = (curvatura)!!
r
la torsione:
b' ( s ) // a n ( s ) ; infatti:
r
d
d
d
d
d
d
b(s ) = (t(s ) n ( s )) = t( s ) n (s ) + t(s ) n (s ) = ' ' ( s ) n (s ) + t( s ) n( s ) = t(s ) n (s )
ds
ds
ds
ds
ds
ds
d
n ( s ) non
ds
rappresenta una variazione del modulo di n ( s ) , ossia lungo la sua estensione di vettore,
ma, di conseguenza, una variazione solo ortogonalmente allo stesso n ( s ) , dunque
d
n ( s ) n ( s ) , e parlandosi di terna ortogonale, si ha anche che
possiamo dire che:
ds
d
(ovviamente) [t( s) n ( s)] // n ( s ) e dunque viene ad essere proporzionale a n ( s ) :
ds
1
b' ( s ) =
n ( s ) ;
(1.19)
( s)
1
r
la TORSIONE di in (s ) .
( s)
1
t' ( s ) =
n (s )
( s)
1
b' (s ) =
n (s )
( s)
1
1
n ' (s ) =
b( s )
t ( s)
( s)
( s)
(formule di Frnet)
(1.20)
Curiosit: un corpo che si muove lungo una curva potr ovviamente avere una
accelerazione tangenziale at ed una accelerazione centrifuga ac che, dalla fisica, sappiamo
essere v2 /r. Vediamo ora se le nostre equazioni e tutto il formalismo finora esposto
confermano ci. Si ha:
r
r
d ( s ) d ( s ) ds ds
=
= t( s )
dt
ds dt dt
r
d 2 ( s ) d 2 s
r r r
ds 2 dt(s ) d 2 s
ds 2 1
v2
=
t
(
s
)
+
(
)
=
t
(
s
)
+
(
)
n
(
s
)
=
a
=
a
+
a
=
a
t
(
s
)
+
n ( s ) c.v.d.
t
c
t
dt 2
dt 2
dt
ds
dt 2
dt ( s )
r
r
Se ora si effettua un cambio di parametri ( (u , v ) >>>> * ( , ) ), cambiano i coefficienti E,
F e G, ma I=I*:
2
2
r r
r
r
r
r
r
I * (d , d ) = d d = d 2 = *d + *d = * ( u du + v dv) + * (u du + v dv ) =
2
r
r
r
r
r
r 2
r
= ( * u + *u )du + ( * v + *v )dv = u*du + v*dv = d 2 = I (du, dv )
lunghezza di un arco:
r r
Si abbia un arco = (u (t ), v(t )) ;
(1.21)
qui compaiono ancora i due parametri u e v caratteristici delle superfici, ma avendo
sottolineato la loro reciproca dipendenza da un sol parametro comune t, la (1.21) allora
anche lespressione di una curva (su cui larco). Per la lunghezza s tra a e b, si ha allora,
ovviamente:
s=
r
r r
b d
b r du
d
d
r dv r du r dv 1 / 2
dt = ( )1 / 2 dt = [( u
+ v )( u
+ v )] dt =
a
a
dt
dt dt
dt
dt
dt
dt
= [E (
a
du 2
du dv
dv
) + 2F
+ G ( )2 ]1 / 2 dt
dt
dt dt
dt
(1.22)
r
d v dudv
u v
r r2 r2 r2 r r2
Ora, dal momento che vale la seguente identit vettoriale: a b = a b a b , si ha
r
r 2
allora: d u d v = EG F 2 e dunque:
A = dA =
A
u v
r
d v dudv =
EG F 2 dudv
(1.23)
uv
b
dr
d dr
d
dv
du dv
du 2
+ G ( ) 2 ]1 / 2 dt = [ E ( ) 2 + 2 F
+ G ( ) 2 ]1 / 2 dt =
) + 2F
a
a
dt
dt dt
dt
dt
dt dt
dt
b
b
b
d
d
2
dt = rdt = rT = r T = 2r = C
= [ E ( ) 2 ]1 / 2 dt = E
a
a
a
dt
T
dt
cio proprio la circonferenza del cerchio!!!
b
s = [ E(
EG F 2 dd =
r 4 sin 2 0dd =
sin dd =
= r 2 d sin d = r 2 2 cos 0 = r 2 2 2 = 4r 2
(1.25)
r
r
r r
r
r
r r
r r r r
r r
II = d dN = ( u du + v dv)( N u du + N v dv) = u N u du 2 ( u N v + v N u )dudv v N v dv 2 =
= Ldu 2 + 2Mdudv + Ndv 2
propriet di II:
r
r r
r r
r r r r
visto che si ha che: ( u , v ) N , segue che 0 = ( u N )u = uu N + u N u ,
r r
r r r r
r r
r r r r
r r
r r r r
0 = ( u N )v = uv N + u N v , 0 = ( v N )u = vu N + v N u , 0 = ( v N )v = vv N + v N v ,
r r
r r r r
r r
r r
r r
r r
r r
quindi: uu N = u N u , vv N = v N v , uv N = u N v , vu N = v N u e allora:
r r
r r
r r
L = uu N , M = uv N , N = vv N da cui:
r r
r r
r r
r r
II = Ldu 2 + 2Mdudv + Ndv 2 = uu Ndu 2 + 2 uv Ndudv + vv Ndv 2 = d 2 N
curvatura normale:
Se si ha una superficie S contenente una curva C e se P un punto su C, la (1.20-1) ci
fornisce il vettore curvatura, mentre definiamo curvatura t'n ( s ) normale a C in P la
r
r
proiezione del vettore curvatura t' ( s ) sulla normale N (ed N il versore n ( s ) della
(1.10)):
r r
r
r
t'n (s ) = (t' ( s ) N ) N e la componente lungo N : tn = t' ( s ) N .
r
Ora, visto che t( s ) N , si ha:
r
r
r
d
d r
d r
(t ( s ) N ) = 0 = t' ( s ) N + t( s ) N , da cui: t' ( s ) N = t( s ) N e allora:
ds
ds
ds
r
r
r
r
r
r
d (s ) dN
d dN II
r
d r
tn = t' (s ) N = t(s ) N =
= 2 = , in quanto il numeratore d dN
ds
ds ds
ds
I
2
proprio la definizione di II, mentre ds lo si pu valutate derivando la (1.22) e quadrando,
e si ha proprio I.
esempio: curvatura normale della sfera
abbiamo gi visto con la (1.2) che la sfera (Fig. 1.1) si rappresenta con la seguente
equazione:
r
= (r cos sin ) x + (r sin sin ) y + (r cos ) z da cui:
r
= (r sin sin ) x + (r cos sin ) y
r
= (r cos cos ) x + (r sin cos ) y (r sin ) z
r
= (r cos sin ) x (r sin sin ) y
r
= (r sin cos ) x + (r cos cos ) y
r
= (r cos sin ) x (r sin sin ) y (r cos ) z
r
N = (r cos sin ) x (r sin sin ) y (r cos ) z
r
r r
r r
r r
r r
r
E = = r 2 sin 2 , F = = 0 , G = = r 2 , L = N = r sin 2 , M = N = 0
r
r
N = N = r , da cui:
tn =
Ld 2 + 2 Mdd + Nd 2 1
= !!!
Ed 2 + 2 Fdd + Gd 2 r
dimostrazione:
tn un estremante se (tn=II/I)
dtn
du
=0 e
( du 0 , dv 0 )
I II dv II I dv
I2
II du
II
I du
I
II du t0 I du
dtn
dv
= 0 , cio:
( du 0 , dv 0 )
= 0 e:
( du0 , dv0 )
= 0 , e: II dv
( du0 , dv0 )
( du0 , dv0 )
I II du II I du
I2
II
I dv
I
= 0 e II dv t0 I dv
= 0 ma:
( du0 , dv0 )
( du0 , dv0 )
II
(du0 , dv0 ) = t0 , dunque:
I
= 0 . Essendo ora:
e cio lasserto.
Riscriviamo ora le (1.26) nel seguente modo:
( L tE )du + ( M tF )dv = 0
(M tF )du + ( N tG )dv = 0
(1.27)
r r
N N = 1 , da cui: 1 = 2 = 0 e quindi le
r
r
r
r
uu = 111 u + 112 v + b11 N
r
r
r
r
uv = 121 u + 122 v + b12 N
Gauss
r
r
1 r
2 r
vv = 22 u + 22 v + b22 N
r
r
r
N u = 11 u + 12 v
r
r
r Weingarten
N v = 21 u + 22 v
(1.29)
(1.30)
e ricordiamoci bene che, con la (1.30), si appena iniziato a fare uso della CONVENZIONE
DI EINSTEIN, secondo cui, se in un termine un indice ripetuto, su esso sottintesa la
r
sommatoria su quellindice. Infatti, nel termine ij della (1.30), ripetuto e dunque
tale termine dar due valori, esattamente come succede nelle equazioni (1.29) di Gauss.
Il TENSORE METRICO g ij :
rivediamo un attimo la nostra terminologia sin qui usata, usando forme un po pi
compendiose:
r
r
2
r
r
1
2
u = u , v = u , u = (u , v) , i = i , ij = i j ;
u
u u
r r r r 1 1
r r 1 2 r r 2 2
I = d d = 1 1du du + 2 1 2du du + 2 2 du du = g11du1du1 + g12 du1du 2 + g 21du 2 du1 +
+ g 22 du 2du 2 = gik du i du k = gik du i du k , con: g11 = E , g12 = g 21 = F , g 22 = G e:
i, k
g11
g = det
g 21
g12
= g11 g 22 g 21 g 22 = EG F 2 = g
g 22
r r
r
Inoltre: dN = N1du1 + N 2 du 2 e:
r r
r r
r r
r r
r r
II = d dN = 1 N1du1du1 1 N 2du1du 2 2 N1du 2 du1 2 N 2 du 2 du 2 =
= b11du1du1 + b12 du1du 2 + b21du 2 du1 + b22 du 2 du 2 = bik du i du k
i ,k
b b
con: b11 = L , b12 = b21 = M , b22 = N e: b = det 11 12 = b11b22 b21b22 = LN M 2 = b .
b21 b22
r
Moltiplichiamo ora scalarmente le eq. di Gauss per k si ha:
r r
r r
r r
r r
r r
ij k = ij k + bij N k = ij k + 0 = ij k = ij gk = ijk ( , i, j = 1,2 )
(1.31)
(1.32)
g ij
= ikj + jki
u k
dimostrazione:
r r
si ha, per definizione di g ij , che: g ij = i j , da cui:
Si ha che:
(1.33)
g ij r r r r
= ik j + i jk = ikj + jki
u k
-----------------1 g ik g ki g ij
)
Si ha poi che: ikj = ( i +
(1.34)
2 u
u j u k
dimostrazione:
g ij
g ik
g ki
si ha, per la (1.33), che:
= jik + kij ,
= kji + ijk e
= ikj + jki , (si tratta
i
j
u
u
u k
sempre della (1.33), ma con indici ogni volta diversi, ma, del resto, gli indici hanno valore
1 e 2, indipendentemente dal loro nome), da cui lasserto.
-----------------Segue che:
g
g
1
g
ijk = g k ( ji + ji ij )
(1.35)
2
u
u
u
e inoltre, moltiplicando la (1.32) ijk = g k ij in entrambi i membri per g (reciproco di
g k ) , dove appunto, per definizione di reciproco: g g k = k , si ha:
g ijk = g g k ij = k ij , ossia, rimuovendo in questultima k a condizione di porre
= k nel suo primo membro, si ha:
ij = g ij e, grazie a questultima, la (1.33)
g ij
= ikj + jki = g j ik + g i k
u k
g ij
= ikj + jki diventa:
u k
(1.36)
-----------------r
r
r
Moltiplicando scalarmente per j le equazioni di Weingarten (1.29) N i = i , si ottiene:
r r
r r
bij = N i j = i j = i gj ; ponendo ora: bi j = bi g j , si ha:
r
r
bi j = bi g j = i g g j = i j = i j ; dunque N i = bi , con:
bi j = g j bi e bij = gj bi
i simboli (tensori) di Riemann di 1^ e 2^ specie:
Rmijk = bik b jm bij bkm (2^ specie, tensore di rango 4)
(1.37)
(1.38)
(1.39)
ultimi due, coincidono, dunque, solo quattro componenti sono diverse da zero e sono:
R1212 = R2121 = b22b11 b12b21 = LN M 2 = b e R1221 = R2112 = b12 b21 b22b11 = ( LN M 2 ) = b
Notiamo che:
LN M 2 b R1212
= =
= K (Gauss ) .
EG F 2 g
g
------------------
(1.40)
(1.41)
dimostrazione:r
r
r
ij = ij + bij N >>>
r
r
r
r
ij r
r
r
r
=
=
(
+
(
b
)
N
+
b
N
=
(
+
b
N
)+
ijk
ij k
ij k
ij k
ij k
ij k
ij
k
k
u k
r
r
r
r
+ (bij ) k N + bij (bk ) = [(ij ) k + ij k bij bk ] + [ij bk + (bij )k ]N
r
r
dove si usata la eq. di Weingarten N i = bi .
r
r
r
Analogamente: ikj = [(ik ) j + ik j bik bj ] + [ik bj + (bik ) j ]N
Ora, le derivate del terzo ordine sono indipendenti dallordine di derivazione se e solo se:
r
r
ijk = ikj , ossia:
r
r
r
r
ijk ikj = [(ij ) k (ik ) j + ij k ik j bij bk + bik bj ] + [ij bk + (bij ) k ik bj (bik ) j ]N = 0
r
r
r
e dato che 1 , 2 ed N sono linearmente indipendenti, lequazione precedente equivale
a dire che:
[(ij )k (ik ) j + ij k ik j bij bk + bik bj ] = 0
(1.42)
[ij bk + (bij )k ik bj (bik ) j ] = 0
La (1.42), mediante la (1.39), fornisce: Rijk = (ik ) j (ij )k + ik j ij k , cio lasserto.
Capitolo 2: Le grandezze salienti della Teoria della Relativit Generale .
Par. 2.1: Concetti introduttivi sulla Relativit Generale.
{
{
1
x = x'+ at 2
2
y = y'
z = z'
t = t'
dx = dx'+ at ' dt '
dy = dy '
dz = dz '
dt = dt '
e:
da cui:
oppure
(2.2)
d 2 = (c 2 a 2t '2 )dt '2 2at ' dx ' dt ' dx '2 dy '2 dz '2
(2.3)
Se poi abbiamo anche un altro sistema I col piano x-y in rotazione (a velocit angolare )
rispetto a quello del primo, avendosi il seguente sistema di trasformazione:
= t
(2.4)
e si vede che in nessun caso ((2.2), (2.3), e (2.4), che sono del tipo d 2 = g dx dx ;
vedere oltre) si pu ridurre d 2 , tramite trasformazioni temporali, alla somma algebrica
dei quadrati dei differenziali delle quattro coordinate, come nella (2.1) e come sarebbe
invece per un altro sistema di riferimento inerziale.
Dunque, la presenza di accelerazioni rettilinee dei sistemi di riferimento (che possono
annullare i campi gravitazionali) e anche centrifughe/centripete, ossia centrali, come per la
gravit (ad esempio, in seguito a rotazioni), introducono termini misti che cambiano la
metrica, e dunque la geometria dello spazio/spazio-tempo. Da qui lesigenza di formulare
una teoria relativistica per la gravitazione (TRG).
Par. 2.2: Sul tensore metrico ed altre grandezze salienti.
(2.5)
(2.6)
1 k g j gi gij
g ( i +
(2.7)
(2.8)
ijk =
Il tensore metrico g ik , nel caso ci si trovi in spazi euclidei, si riduce al tensore di Minkowski
ik (vale 1 per i=k=1,2,3 e vale -1 per i=k=4; vale 0 per i diverso da k) e senza termini
misti, cio con i,k diversi, ik=0; infatti, si avrebbe ( u i = x, y, z , ct ):
(x,y,z)
( r , , )
Ora, nel caso in cui si effettui un cambiamento di sistema di coordinate (x,y,z) >>>>
(x,y,z) con il secondo magari traslato e ruotato rispetto al primo, ci saranno delle
classiche equazioni di passaggio da un sistema allaltro, ma i due sistemi di coordinate
avranno sempre la stessa rappresentazione grafica di assi che si estendono dallorigine
allinfinito, in positivo come in negativo.
x ' 2 + y '2 + z '2 = r 2
(x,y,z)
z
x
Se ora io suppongo di dover passare da un sistema come quello di Fig. 2.2 ad uno in cui lo
spazio , per qualche motivo, incurvato, magari dalla gravit della materia e dellenergia,
come sostenuto in Relativit Generale, allora la geometria euclidea non mi pi sufficiente
dy
dx
dx
0
dz
dz
{
{
1 = 1 ( x1 , x 2 , x 3 , x 4 )
2 = 2 ( x1 , x 2 , x 3 , x 4 )
3 = 3 ( x1 , x 2 , x 3 , x 4 )
4 = 4 ( x1 , x 2 , x 3 , x 4 )
(2.11)
e viceversa:
x1 = x1 ( 1, 2 , 3 , 4 )
x 2 = x 2 ( 1 , 2 , 3 , 4 )
x 3 = x 3 ( 1, 2 , 3 , 4 )
x 4 = x 4 ( 1 , 2 , 3 , 4 )
(2.12)
e per le equazioni di conversione delle espressioni per le superfici e per gli oggetti
r
r
geometrici ( ), si ha ovviamente ( = 1i + 2 j + 3k + 4t = ( 1 , 2 , 3 , 4 ) e
r
r
r
r
r
( = x1 1 + x 2 2 + x 3 3 + x 4 4 = ( x1 , x 2 , x 3 , x 4 ) ):
r
r 1
2
3
4
1 = 1 = 1 i + 1 j + 1 k + 1 t
x
x
x
x
x
r
1
2
3
r
4
2 = 2 = 2 i + 2 j + 2 k + 2 t
x
x
x
x
x
r
1
2
3
r
4
3 = 3 = 3 i + 3 j + 3 k + 3 t
(2.13)
x
x
x
x
x
r
r
1
2
3
4
4 = 4 = 4 i + 4 j + 4 k + 4 t
x
x
x
x
x
e inoltre, ovviamente:
1 1 1 2 1 3 1 4
dx + 2 dx + 3 dx + 4 dx
x
x
x
x1
2
2
2
2
d 2 = 1 dx1 + 2 dx 2 + 3 dx 3 + 4 dx 4
x
x
x
x
3
3
3
3
d 3 = 1 dx1 + 2 dx 2 + 3 dx 3 + 4 dx 4
x
x
x
x
4
4
4
4
d 4 = 1 dx1 + 2 dx 2 + 3 dx 3 + 4 dx 4
x
x
x
x
d 1 =
(2.14)
r
e allora: d = d 1i + d 2 j + d 3k + d 4t = (d 1, d 2 , d 3 , d 4 ) = (dx1 , dx 2 , dx 3 , dx 4 ) =
r
r
r
r
r
r
r
= d = dx1 1 + dx 2 2 + dx 3 3 + dx 4 4 = dx i i = d
(2.15)
r
r
r
r
r
e dunque ( dx1 , dx 2 , dx 3 , dx 4 ) sono le componenti di nella base curvilinea ( 1 , 2 , 3 , 4 ).
r r r r
Esiste ora una quaterna reciproca ( 1 , 2 , 3 , 4 ) tale che, per definizione:
r r
i j = i j .
Riprendendo ora un attimo la (2.15), dove palesemente utilizzata la convenzione di
r
r
Einstein, si ha: d = dx i i
Se ora vogliamo effettuare un cambiamento di base curvilinea, con coordinate da dx i a
r
r
dx'l , scriveremo ovviamente che: dx i i = dx'l 'l e, moltiplicando entrambi i membri per
r
r r
x i
i , si ha: dx i = dx'l 'l i , ma anche vero che (come per le (2.14)): dx i = l dx'l ; segue
x '
i
r r
x
= 'l i , ossia:
che:
l
x '
r
r x i
'l = i l
(2.16)
x '
e la (2.16) lequazione per il cambiamento di base.
Legge di trasformazione delle componenti di un 4-vettore:
r
r
r
sia V = V i i un generico vettore espresso con le coordinate curvilinee nella base i ; nella
r
r
r
base 'l si avr invece: V = V 'l 'l e, per la (2.16):
r
r
r
x i r
V = V 'l 'l = V 'l l i = V i i , con:
x '
i
x
V i = V 'l l
(2.17)
x '
che la equazione di trasformazione delle componenti di un 4-vettore per cambiamento di
i
i
l x '
base. Banalmente, la sua inversa : V ' = V
x l
------------------
x ' x '
x'
x '
x ' x '
T ' = V ' S ' = V S = V S
T
= T ' ed ecco come si
=
x x
x x
x
x
trasformano le componenti di un tensore di rango 2. Si procede poi similmente per tensori
di rango superiore.
V ' = V
x'
x
S ' = S
derivazione di un 4-vettore:
r
r
si abbia un 4-vettore: V = V ; deriviamolo:
r
r
dV dV r
d
=
+V
,
(2.18)
dx dx
dx
gli indici cambiano da un termine allaltro, perch essi variano su quattro valori e non
devono necessariamente essere contemporaneamente gli stessi nei vari termini.
r r
Moltiplichiamo ora il secondo membro della (2.18) per la quantit unitaria
r
r
dV
dV
d r r
= [ +V
] ; bene, la quantit tra le quadre la derivate covariante ed
dx
dx
dx
un tensore, per quanto finora detto:
r
dV
dV
d r
V; = + V
=
+ V (derivata covariante)
(2.19)
dx
dx
dx
con i detti Simboli di Christoffel (connessione affine) e gi introdotti con la (1.30).
Inoltre, per il sistema (2.13), potremmo scrivere, pi in forma vettoriale compendiosa, che
r
r
= ( ) , da cui una forma duale per la quaterna reciproca (tale che, per def.
x
r
x
= ( ) e dunque il coefficiente nella (2.19)
= = ( ) =
, che, inserito nella (2.19), pu essere
dx
dx
x
x x
anche scritto in modo pi semplice, senza i coefficienti unitari :
2 x
=
(2.20)
x x
Poi, gi nellApp. 1 sulla Relativit Ristretta, abbiamo ricordato che una tale derivata (di un
vettore) d un tensore. Si vede poi che tale derivata un tensore (di rango 2) gi solo per
il fatto che gli addendi che la compongono contengono due indici, appunto come un
tensore 2.
Inoltre, la (1.30) del capitolo precedente sulla Geometria un esempio di derivata di un
vettore (versore) che appare appunto come tensore 2.
r r
di reciprocit: = ):
derivazione di un tensore:
k
T +
T +
T
Tk
x
r r
(2.21)
r r r
r r r
r r r r r
r r r r r
(T ) = ( T )( ) + T ( ) ( ) + T ( ) ( ) +
x
x
x
x
r
r
r
r
r
k
T +
T
Tk = T
Tk ( ) k ( ) = T +
; cvd.
x
x
r
r
r
r
r k
r r k
r
r r
, da cui:
(in quanto : k = k = 0 = k +
)
k =
x
x
x
x
x
x
Par. 2.3: Sulla Trasformazione di Lorentz in Relativit Generale.
Riprendiamo un attimo la (2.9), dove sappiamo dallApp. 1 sulla Relativit Ristretta che
d 2 Lorentz invariante:
x' x'
d 2 = dx ' dx' =
dx dx = dx dx , con:
x x
x ' x'
=
(2.22)
x x
Differenziamo ora la (2.22) rispetto ad x :
2 x' x'
x ' 2 x'
0 = +
; ora, sommiamo a questultima la stessa con ed
x x x
x x x
scambiati e poi sottraiamo sempre la stessa con e scambiati, ottenendo:
2 x' x '
2 x '
0 = 2 >>>>>
= 0 , la cui soluzione :
x x x
x x
x' = x + a
(Trasformazioni di Lorentz)
(2.23)
x' x'
= .
x x
Inoltre, la (2.23) in forma differenziale : dx' = dx .
Questa, unitamente alla (2.22), fornisce: =
(2.24)
Valutiamo ora gli elementi della matrice di Lorentz (o del tensore di Lorentz) :
Dalle Trasformazioni di Lorentz (A1.8) in App. 1, abbiamo che (// e si riferiscono alla
direzione di moto):
r r
r
r
r
r
r
V x
x '// = ( x// Vt ) , x ' = x , t ' = (t 2 ) ; inoltre, ovviamente, si ha che:
c
r
r
r
r
r
r r
V
x// = ( x V ) 2 e x = x x// , sicch:
V
r
r
r r
r r V
x ' = x + ( 1)( x V ) 2 Vt e
(2.25)
V
r r
V x
t ' = (t 2 )
c
mentre per la (2.24), si ha: dx'i = i dx , da cui, lasciando lalfabeto comune (i,j ecc) per le
tre componenti spaziali, 0 come quarto coefficiente temporale e quello greco per tutto:
dx'i = i j dx j + i0 dx 0
(per la (2.24))
(2.26)
r r Vi
1
dx'i = dx i + ( 1)(dx V ) 2 + V i dx 0 (per le (2.25))
V
c
(qui lultimo termine ha segno + e non perch dx 0 = cdt )
(2.27)
( 1) i
V Vj
V2
(Tensore di Lorentz)
r r
dove il prodotto dx V della (2.27) ha reso solo la componente dx jV j nella (2.26), in
quanto nella (2.26) compariva solo dx j .
Se la T. di Lorentz diretta data dalla (2.24): dx' = dx quella inversa, evidentemente, la
indichiamo cos: dx = ' dx' .
Allora, come del resto vedemmo anche in App. 1 sulla Relarivit Ristretta, non solo le
componenti spaziali (x) e temporali (ct) si possono trasformare con Lorentz, ma anche i
quadrivettori ed i quadritensori lo fanno:
V ' = V
T '
= T (ricordando che le componenti di un tensore si ottengono moltiplicando
dove la Delta di Dirac mi garantisce il giusto valore di en nella sommatoria per ogni
r
posizione xn (t ) .
Per quanto riguarda invece la corrispondente densit di corrente di materia/energia
r r
J ( x , t ) , si ha ovviamente:
r
r r
r
dxn (t )
3 r
J ( x , t ) = en ( x xn (t ))
dt
n
r
dxn (t )
[m / s ] ci d proprio una corrente di joule al metro
infatti, en [ J / m3 ] moltiplicato per
dt
quadro.
r r
dx (t )
In componenti: J ( x ) = en 3 ( x xn (t )) n
e, ovviamente: J 0 = e xn0 (t ) = ct .
dt
n
Ora, la sommatoria sui punti n; per avere il totale, bisogna integrare anche sul tempo:
dxn (t ' )
; moltiplicando ora numeratore e
dt '
n
denominatore per c, visto che il de tempo proprio d = cdt ' , avremo:
J ( x ) = dt ' ( x xn (t ' ))J ( x ) = dt ' en 4 ( x xn (t ' ))
J ( x) = d en 4 ( x xn ( ))
n
dxn ( )
d
dxn ( )
.
d
r r r
r r
r r
dx i (t )
dx i (t )
Inoltre, J ( x , t ) = en i 3 ( x xn (t )) n = en i 3 ( x xn (t )) n =
x
dt
xn
dt
n
n
r r r
r r
r
r
= en 3 ( x xn (t )) = ( x , t ) . Portando ora ( x , t ) insieme con J ( x , t ) , avremo
t
t
t
n
la quadridivergenza (vedi anche App.1):
J ( x ) = 0 ( evidente linvarianza su Lorentz).
(2.28)
x
r
Inoltre, Q (mat energ ) = d 3 xJ 0 ( x ) = d 3 x ( x , t )
J (x) un 4-vettore, perch tale
------------------
il 4-vettore momento-energia:
Gi stato trattato, tale vettore, nellambito della Relativit Ristretta (App. 1).
dx
dp
d 2 x
Ovviamente, p = m0
;poi
= m0
= f e
2
d
d
d
r 2 2 1/ 2
r 2 1/ 2
2
2
d = (c dt dx ) = (1 V c ) dt = dt
da cui, per la componente tridimensionale e per quella temporale:
r
r
p = m0V e p 0 = E0 c = m0c e quindi:
dx
.
d
Ovviamente, per Lorentz: p' = p .
p = ( E0 c 2 )
(2.29)
(2.30)
(*): In realt considereremo la massa m come massa riferita unit di volume [kg/m3]
il TENSORE momento-energia:
r
r r
T 0 ( x , t ) = pn (t ) 3 ( x xn (t ))
(0 la componente temporale)
(2.31)
r
r r
dxi (t )
T i ( x , t ) = pn (t ) n 3 ( x xn (t )) (i fa invece riferimento alle tre componenti spaziali)
dt
n
e, nellinsieme, in modo pi compendioso:
r r
dx (t )
T ( x) = pn (t ) n 3 ( x xn (t )) ( xn0 (t ) = ct )
(2.32)
dt
n
La prima effettivamente un momento (p) e la seconda effettivamente unenergia (p x
v). Come in precedenza, si sommato sulle particelle n.
(Sommando poi anche sul tempo, si avrebbe, anche qui dopo aver moltiplicato numeratore
dx
e denominatore per c: T = d pn n 4 ( x xn ( )) )
d
n
Ora, la (2.32), tramite la (2.30), diventa:
r r
p p
T ( x) = n n2 3 ( x xn (t ))
n ( En / c )
Si nota la simmetria T ( x ) = T ( x ) ; inoltre, T (x) un tensore e, come tale, per
Lorentz, si trasforma come segue:
T ' = T .
(2.33)
Inoltre, proprio come fatto in precedenza per giungere alla (2.28), tramite la quadri
divergenza, si ha:
dxni (t ) 3 r r
dxni (t ) 3 r r
i r
T
(
x
,
t
)
p
(
t
)
(
x
x
(
t
))
p
(
t
)
=
n n dt xi
n n dt xi ( x xn (t )) =
n
x i
n
r
r r
3 r r
dp (t )
( x xn (t )) = T 0 ( x , t ) + n 3 ( x xn (t ))
t
t
dt
n
n
r
dp (t )
Dunque, i T i + T 0 = T = n 3 ( x xn (t )) = G ( x , t ) , ossia:
x
t
x
dt
n
T = G , con:
x
r
r r
r r
dp (t )
d dpn ( ) 3 r r
d
G ( x , t ) = n 3 ( x xn (t )) =
( x xn (t )) =
f n (t ) 3 ( x xn (t ))
dt
d
n
n dt
n dt
= pn (t )
dpn
dove f =
ovviamente una forza.
d
T = 0 !!!
x
(2.35)
1
1 (V 2 c 2 )
1
1V 2
, con c=1)
T ij = p ij + ( p + ) 2V iV j
T i 0 = ( p + ) 2V i
T 00 = 2 ( pV 2 + )
~
~
~
T = T = i0 00T 00 + i j 0jT jj = 2V i + p (i j 0j ) = 2V i + p(ii 0i + ik 0k + il 0l ) =
i0
(
V
)
+
p
+
p
(
V
)
[(V i )2 + (V k ) 2 + (V l )2 ] +
4
2
2
V
V
V
2
( 1)
( 1)
( 1)
+ 2 p(V i )2
= 2 (V i )2 + p + p(V i ) 2
+ 2 p (V i ) 2
= p + 2 (V i ) 2 +
2
2
V
V
V2
( 1)
(V i )2 2
i 2
2
+ p (V i )2
+
=
+
+
(
1
2
)
p
(
V
)
p
( 1) = p + 2 (V i ) 2 + p(V i ) 2 2 =
2
2
V
V
2
2
( 1)
= p + 2 (V i ) 2 ( p + ) . (poich
= 2 = 2 se c=1)
2
V
c
Nel caso invece di i j:
~
~
~
~
~
T ij = i j T = i0 0j T 00 + ii jiT ii + i j jjT jj + ik jk T kk = (k i, j ) = 2V iV j +
( 1) i j ( 1)
( 1)
( 1)
][V V
] + p[V iV j
][1 + (V j )2
]+
2
2
2
V
V
V
V2
2
( 1)
jk
j k ( 1)
2 i j
i
j ( 1)
i 2 i
j ( 1)
p[ ik ( = 0) + V iV k
][
+
V
V
]
=
V
V
+
pV
V
+
p
(
V
)
V
V
+
( = 0)
V2
V2
V2
V4
2
2
( 1)
i j ( 1)
j 2 i j ( 1)
k 2 i j ( 1)
+ pV V
+ p(V ) V V
+ p(V ) V V
= 2V iV j + 2 pV iV j
+
2
4
4
V
V
V
V2
2
( 1) 2
2 i
i 2
j 2
k 2
j
i
j ( 1)
i j ( 1)
[(
)
(
)
(
)
]
2
+ pV iV j
V
+
V
+
V
=
V
V
+
pV
V
+
pV
V
=
V4
V2
V2
( 2 1) 2
( 1)
2 i
j
= 2 = 2 se c=1).
= 2V iV j + pV iV j
(
2
+
1
)
=
V
V
(
p
+
)
(poich
2
2
V
V
c
+ p[1 + (V i )2
In totale:
T ij = p ij + ( p + )V iV j 2 (per le componenti spaziali)
T = p + ( p + )U U (per tutte e 4 le componenti, ma in campi deboli ( ))
dx i
dx i
dove U =
=
= V e U 0 = c .
d
dt
Per ultimo, per campi gravitazionali qualsiasi ( >>>> g ):
T = pg + ( p + )U U (c=1) cvd.
i
d dx
2 dx dx
d 2 x
2
+
=
=
=
0
(
)
d x d
x d 2 x x d d
2
x
e teniamo conto del fatto che:
Moltiplichiamo ora entrambi i membri per
x
= si avr:
d 2x
dx dx
(2.38)
+
d 2
d d
(equazione della geodetica, dove geodetica, qui sulla Terra, la rotta minima tra una
localit e laltra)
2 x
con
.
=
x x
x
x x
g
2
2
2
=
+
;
ricordando
ora
che
=
segue che:
x
x x x
x x x
x x
x
=
g + g
=
x
x x
x x
(2.39)
g
g
e
, da cui:
x
x
g g g
k
+ = 2 g k
; definendo ora una matrice (o tensore) reciproco g tale che:
x
x
x
g g k = k , si avr, dunque:
g
g
1
g
= g ( +
),
(2.40)
2
x
x
x
esattamente ci che ottenemmo in ambito puramente geometrico appunto nel Capitolo 1.
Par. 2.8: Il limite Newtoniano.
r
r
Sappiamo che nel limite newtoniano (V<<c): d 2 = c 2 dt 2 dx 2 = c 2 dt 2 V 2 dt 2 c 2 dt 2
Ci equivale a dire che V = dx i / dt dx i / d << dx 0 / d dx 0 / dt = d (ct ) / dt = c , ossia
appunto: dx i / d << dx 0 / d .
d 2x
dt
Con ci, la (2.38) diviene:
+ 00 ( ) 2 = 0 (con la convenzione c=1); inoltre, essendo,
2
d
d
in tale limite, il campo stazionario, g tende a (cost) e allora le derivate temporali di
g sono nulle e allora, per la (2.40):
1
g
1
h
00 = g 00
e g = + h , con h << 1 e quindi: 00 = 00 e:
x
2
x
2
r
d 2 x 1 dt 2
= ( ) h00 = 0 da cui:
d 2 2 d
r
d 2x 1
= h00 = 0 e
dt 2 2
d 2t
dt
=C.
= 0 da cui:
2
d
d
(2.41)
r
r
mM
GM
Ora, sappiamo dalla gravitazione di Newton che: ma = G 2 r , da cui: a = 2 r , ma:
r
r
2r
r d x
GM
GM
GM
r = (
) = (con =
) e quindi: a = 2 = e da questultima con la
2
r
r
r
dt
(2.41), emerge che: h00 = 2 + const ; visto che allinfinito h00 = = 0 , allora const=0 e:
g 00 = 00 + h00 = 1 2 = (1 + 2 )
(2.42)
equazione di Poisson:
r
definiamo ora, con ovviet, il flusso del vettore accelerazione a :
r
r
r r
GM
GM
dS
(a ) ; si ha: d(a ) = a dS = 2 r udS = 2 cosdS = GM 2n = GMd , da cui:
r
r
r
r
r r
(a ) = a dS = GM d = 4GM , ma: M = ( x, y, z )dV , da cui:
S
r r
r
r r
(a ) = 4G ( x, y , z )dV = a dS = for _ Theorem _ of _ Div. = adV , e cio:
V
S
V
r r
a = 4G ( x, y, z )
r 1
r
r
Adesso, visto che si ha dallanalisi matematica che ( ) = 2 , allora: = a e quindi:
r
r
2
= = 4G (Equazione di Poisson)
(2.43)
Par. 2.9: Il Tensore di Curvatura di Riemann-Christoffel.
1 g g g
g ( + ) , e cio
2
x
x
x
esattamente ci che ottenemmo al Cap. 1 , con la (1.35), in chiave puramente geometrica.
Ora, sarebbe possibile, sebbene in forma un po ampollosa, esplicitare la forma del tensore
di curvatura di Riemamm-Christoffel tramite calcoli diretti, puramente matematici, proprio
in analogia col Par. 2.7, ma si ottiene appunto quanto ottenuto al Cap. 1 con la (1.41), che
qui riportiamo, ottenuta in chiave pi prettamente geometrica e dove useremo lettere
greche per gli indici, per denotare che parliamo qui di campi gravitazionali di intensit
qualsiasi e ricordando altres che qui tali indici sono a quattro valori (spazio-tempo), tre
spaziali ed uno temporale:
Al paragrafo 2.7 abbiamo dimostrato che
R
k = ( ) k (k ) + k k =
+
k k
k
x
x
(2.43)
e anche R
Rk
k = g
da cui pure: Rk = g R
k e ricordando lespressione (2.40) per
abc :
g
g
g
g
g
g
1
g k [ g (
+ )] g [ g ( k + k k )] +
2
x
x
x
2
x
x
x
x
x
+ g [ k k ]
(2.44)
Rk = g R
k =
g ij
= g j ik + g i k si ha:
k
u
g = g k g = g (k g + k g )
(2.45)
k
x
x
dove stato ovviamente effettuato un piccolo aggiustamento degli indici, che,
ricordiamolo, hanno una valenza di genericit, ossia, poco importa se uso j o k;
importante che essi varino su quattro valori, come ormai sappiamo, e che la loro
ripetizione sia coerente.
g
Rk = [ k k k + k )] [k g + k g ]
+ [ g +
g ]k +
2 x x
x x
x x
x x
]
+ g [
k k
Rk
e cio:
2 g
2 g k
2 g k
1 2 g
= [ k k + )] + g [ k k
]
x x
x x
x x
2 x x
(2.46)
Come, del resto, abbiamo fatto anche alla fine del Par. 1.3, deduciamo tre propriet del
tensore Rk , che sono di verifica diretta:
-Simmetria Rk = Rk
-Antisimmetria Rk = Rk = Rk = Rk
-Ciclicit Rk + Rk + Rk = 0
Il tensore di Ricci:
Rk = g Rk
( Rk = Rk )
(2.47)
2 x x x
x x
x x
x x
e quindi, per verifica diretta, si ha che:
Rk ; + R ; k + Rk ; = 0
Contraendo (moltiplicando con), in questultima, , con g , si ha:
Rk ; R ; k + Rk ; = 0 e, contraendo ancora:
R; R; R ; = 0 che equivale a scrivere anche (gli ultimi due termini sono simili:
2x >>> 1/2):
1
( R R); = 0 e
2
( R
1
g R ); = 0
2
(2.49)
(3.1)
2 g
2 g
1 2 g
2 g
Rk = [ k k k + k )] e Rk = Rk ; essendo il campo statico, le
2 x x
x x
x x
x x
derivate temporali si annullano:
1 2 g 00
1 ij 2 g 00
1
1
R00 = R 0 0 = ( ) = ( i j ) 00 0 = 2 g 00 , da cui:
2
x x
2
x x
2
2
1
1
G00 = 2C1 2 g 00 = C1 2 g 00 , da cui ( C1 = 1 ) G = R g R e quindi:
2
2
1
g R = 8GT
2
che sono le equazioni del campo gravitazionale di Einstein, che riscriviamo:
R
1
g R = 8GT
2
(3.3)
x1 = r sin cos
x2 = r sin sin
x3 = r cos
P(r, , )
(4.1)
r sin d
r
r
X2
x1
dr
rd
(4.2)
d 2 = B(r )dt 2 A(r )dr 2 r 2 (d 2 + sin 2 d 2 ) e dal confronto con lespressione generale della
metrica (2.9), si evince che: g rr = A(r ) , g = r 2 , g = r 2 sin 2 , g tt = B(r ) e siccome
g ortogonale, si ha che: g rr = A1 (r ) , g = r 2 , g = r 2 sin 2 , g tt = B 1 (r ) .
1 g g g
g ( + ) , emerge che le sole
2
x
x
x
= sin cos , r = r = ,
=
= cot , trt = rtt =
.
2 B(r ) dr
r
della (2.43)):
Calcoliamo ora il tensore di Ricci ( = in Rk
+ k k e ricordiamo che
simmetrico su e k , anche
Rk =
x k
x
x k
per eventuale verifica diretta; dunque, in totale, troviamo che:
Rrr =
R = 1 +
r
A' (r ) B' (r )
1
(
+
)+
2 A(r ) A(r ) B(r )
A(r )
R = sin 2 R , Rtt =
(4.3)
(4.4)
Inoltre, per r : g tt = g 00 = B = 1 2 ( =
GM
)
r
2GM
2GM 1
] e A(r ) = [1
] e cio, infine:
r
r
2GM 2
2GM 1 2
]dt [1
] dr r 2 d 2 r 2 sin 2 d 2
d 2 = [1
r
r
(Soluzione di Schwarschild)
B(r ) = [1
(4.5)
Sappiamo dunque che d 2 = B(r )dt 2 A(r )dr 2 r 2 d 2 r 2 sin 2 d 2 e teniamo inoltre conto
della equazione della geodetica (2.38):
d 2 x
dx dx
+
=0
dp 2
dp dp
d 2 r A' (r ) dr 2
r d 2 r sin 2 d 2 B' (r ) dt 2
+
(
)
( )
( ) +
( )
dp 2 2 A(r ) dp
A(r ) dp
A(r ) dp
2 A(r ) dp
d 2 2 d dr
d
0= 2 +
sin cos ( ) 2
dp
r dp dp
dp
(4.6)
(4.7)
0=
d 2 2 d dr
d d
+
+ 2 cot
2
dp
r dp dp
dp dp
(4.8)
0=
d 2t B ' (r ) dt dr
+
dp 2 B(r ) dp dp
(4.9)
Ora, siccome il campo isotropico, poniamo = 2 e dunque le ultime due, (4.8) e (4.9)
diventano:
d
d
d
dt
[ln
+ ln r 2 ] = 0 e
[ln
+ ln B] = 0 , da cui:
dp
dp
dp dp
d
r2
= J (costante)
(4.10)
dp
dt
B = const (=1, per scelta)
(4.11)
dp
dt 1
=
da cui:
. Inserendo ora le (4.10), (4.11) e la condizione ( = 2 ) usata prima,
dp B
nella (4.6), si ha:
dr
d 2 r A' (r ) dr 2
J2
B' (r )
0= 2 +
( ) 3
+
e moltiplicando ora per 2 A(r )
:
2
dp
2 A(r ) dp
r A(r ) 2 A(r ) B (r )
dp
d
dr
J2
1
[ A(r )( )2 + 2
] = 0 cio:
dp
dp
r
B (r )
dr 2 J 2
1
) + 2
= E (costante)
(4.12)
dp
r
B(r )
Facendo poi sistema tra la condizione ( = 2 ) usata prima, la (4.10), (4.11) e (4.12), si
ottiene:
d 2 = Edp 2
(4.13)
A(r )(
r2
d
=J
dp
dr 2 J 2
1
) + 2
= E
dp
r
B(r )
A(r ) dr 2 1
1
E
( ) + 2 2
= 2 ,
eliminando dp, si ha:
4
r
d
r
J B(r )
J
con soluzione:
A1 / 2 (r )dr
=
1
E
1
2 2 )1 / 2
r2( 2
J B(r ) J
r
A(r )(
(4.18)
(4.19)
()
0
RS
(r )
r0
(4.20)
J = bV ed
2
E =1V
(4.21)
La (4.21) banale; per ottenere invece la (4.20), osserviamo che:
d
dr
b r ( ) , da cui: 0 = dr ( ) + rd , da cui: r 2
= ( )r = bV = J
dt
dt
1
Per r = r0 si ha che dr / d = 0 e la (4.18) allora diviene: J = r0 (
1 + V 2 )1 / 2 e la (4.19)
B(r0 )
diviene, con facili passaggi:
( r ) = ( ) +
A1 / 2 (r )dr
1 1
1
1
r 2[ 2 (
1 + V 2 )(
1 + V 2 )1 2 ]1 / 2
r0 B(r )
B(r0 )
r
(4.22)
2 dr
r
B(r )
(r ) () = A1 / 2 (r )[( ) 2 ( 0 ) 1]
r
r0
B (r )
r
Usando ora gli sviluppi (di Taylor) dovuti a Robertson:
(4.23)
GM
GM
+ .... , B(r ) = 1 2
+ .... , si ha:
r
r
GM
1 2
+ ....
r 2 B(r0 )
r 2
r
1 1
r0
( ) (
) 1 = ( ) [
] 1 = ( ) 2[1 + 2GM ( ) + ...] 1
r0
B( r )
r0 1 2 GM + ....
r0
r r0
r
r
r
r
(r r )
2GMr
[( )2 + ( )2 2GM 0
1] = [( ) 2 1][1
+ ...]
r0
r0
rr0
r0
r0 (r + r0 )
Lultima eguaglianza verificabile direttamente.
La (4.23) diviene, per Taylor:
r
(per la risoluzione dei primi due integrali, si ponga 0 = cos x , mentre per il terzo si porr
r
r0
1 t
= t e lintegrale sar
)
r
1+ t
A(r ) = 1 + 2
( r ) () =
2
1 r
GM
GMr
A (r ) [( ) 2 1] [1 +
+
+ ....]dr ossia:
r r0
r
r0 (r + r0 )
1/ 2
1
Int.
2
Int.
3
Int.
r
GM
r
r r0
[1 + 1 1 ( 0 ) 2
] + ... e dunque:
(r ) () = sin 1 ( 0 ) +
r
r0
r
r + r0
=
4GM
4GM
e ricordando la nostra normalizzazione (c=1), si ha infine: =
; con
r0
r0c 2
Questo metodo (Firk) fa leva sulla variazione di velocit che la luce subisce quando si
approssima ad una massa; per tale ragione, ravvedo dei profili di antagonismo alla pura
TRG. Esistono poi anche altri metodi, pi o meno simili, che si basano su tale supposizione
(ad esempio Whlin) e pare che, considerando cifre decimali lontane, siano anche pi
conformi ai dati sperimentali.
Ricordiamo innanzitutto che, per Schwarzschild (vedi, ad esempio, la (4.5)):
d 2 = B(r )dt 2 A(r )dr 2 r 2d 2 r 2 sin 2 d 2 ;
(4.24)
r 2
2
2
2
Sappiamo poi che, in generale: d = c (dt ) (dx ) ed essendo, per un fotone,
r
(dx )2 = c 2 (dt ) 2 , segue che: d 2 = 0 , da cui, per la (4.24):
0 = B(r )dt 2 A(r )dr 2 r 2 d 2 r 2 sin 2 d 2 ; inoltre, considerando luce che viaggia
radialmente verso il Sole, possiamo annullare le componenti in d e d :
0 = B(r )dt 2 A(r )dr 2 ;
(4.25)
la velocit della luce c = dr dt lontano dalla massa del Sole, mentre in prossimit dello
stesso vale la (4.25), dalla quale si ricava che:
V = dr dt = c( B(r ) A(r ))1 / 2 c ;
Dal Par. 4.2 abbiamo i valori di A(r) e B(r), in cui, per, nel momento dei calcoli, va
tenuto conto che non pi c=1; quindi:
2GM
2GM 1
2GM
B(r ) = [1
] e A(r ) = [1
] [1 +
]
2
2
rc
rc
rc 2
2GM
dagli sviluppi in serie sulla variabile
, si ha banalmente che:
rc 2
2GM
2GM 1 / 2
2GM
2GM
2GM
2GM
V c = ([1
] [1 +
]) [1
][1
] [1
] , ossia: V c[1
]
2
2
2
2
2
rc
rc
2rc
2rc
rc
rc 2
V c
V c
Angolo di deflessione
V c
V <c
Sole
Fronte donda
Con riferimento alla Figura 4.2, la parte di fronte donda che pi lontana dalla massa M
ha velocit c, mentre quella pi vicina ha velocit V < c .
y
dx=Vdt
dy
dx=Vdt
Onde piane
di luce
y=0
R
Sole (M)
(4.26)
V r V r
2GM
2GM r
=
=
(c[1
]) = 2
, da cui:
2
y y r y r
rc
r c y
=
y 0
2GM r
r 2c y
=
y 0
2GM R 2GMR
=
.
r 2c r
r 3c
Calcoliamo ora la differenza tra i cammini dx e dx dei fronti donda a distanza verticale y
ed y+dy, alle quali la luce ha velocit rispettivamente pari a V e V:
dx=Vdt e dx=Vdt, da cui:
dx- dx =Vdt-Vdt=dt(V-V) ;
(4.27)
inoltre, si ha, per Taylor: V ' = V + (V y )dy , ossia: V 'V = (V y )dy e la (4.27) diventa:
dx'dx = (V y )dydt
(4.28)
Poi, sempre dalla Figura 4.3 e dalla (4.28), si ha:
d = (dx ' dx ) dy = (V y )dt = (V y ) dx V .
La deflessione totale subita tra e + , considerando che, in tale range, V
quasi sempre uguale a c (tranne che appena in prossimit di M):
+
= d =
1
1 +
(V y )dx (V y )dx e, in prossimit della superficie di M (y=0):
V
c
1 + 2GMR
2GMR +
dx
2GMR
x
=
dx =
=
3
2
2
2 3/ 2
2
2
2
c
rc
c
(R + x )
c
R ( R + x 2 )1 / 2
4GM
=
= 1,75' ' , proprio come ottenuto al Par. 4.4!!!
Rc 2
2GMR 2
2 , cio:
c2
R
a 1 e2
r-
r+
ea
un fuoco=Sole
B(r+ ) B(r )
B(r+ ) B(r )
da cui: E =
e J2 =
2
2
1 1
r+ r
r+2 r2
Si ha: (r ) = (r ) +
(r ) (r ) = [
r
(4.29)
A1 / 2 (r )dr
, da cui, per le (4.29), si ha:
E
1
1 1/ 2
2
r [ 2
]
J B(r ) J 2 r 2
r2 [ B 1 (r ) B 1 (r )] r+2 [ B 1 (r ) B 1 (r+ )] 1 1 / 2 1 / 2
2 ] A (r )r 2 dr
r+2 r2 [ B 1 (r+ ) B 1 (r )]
r
(4.30)
Con tali sviluppi, la radice nella (4.30) pu ridursi ad una forma quadratica in
1
; si pu
r
1 1 1 1
r2 [ B 1 (r ) B 1 (r )] r+2 [ B 1 (r ) B 1 (r+ )] 1
2 = C ( )( )
2 2
1
1
r+ r [ B (r+ ) B (r )]
r
r r r r+
r+2 [1 B 1 (r+ )] r2 [1 B 1 (r )]
; ora, fattorizzando al numeratore ed al denominatore:
r+ r [ B 1 (r+ ) B 1 (r )]
1 1
+ ) ; con tali risultati nella (4.30), si ottiene:
r+ r
GM
[1 +
]dr
1 1 r
r
(r ) (r ) ......... [1 + MG( + )]
; definiamo ora:
r+ r r r 2 [( 1 1 )( 1 1 )]1 / 2
r r r r+
1 1 1 1
1 1 1
= ( + ) + ( ) sin
(4.31)
r 2 r+ r
2 r+ r
si ottiene: ( r = r = 2 ; inoltre, basta ricavare dr in funzione di d nella (4.31) e
sostituire nellintegrale in dr:
3
1 1
1
1 1
P(x,y)
x
Fuoco=(p,0)
Appendici:
App. 1: La Teoria Della Relativit Ristretta
Indice dellApp. 1:
-Indice dellApp. 1.
-App. 1-Introduzione.
Pag.1
Pag.1
Pag.3
Pag.3
Pag.3
Pag.5
Pag.6
Pag.6
Pag.7
Pag.8
Pag.9
Pag.9
Pag.9
Pag.9
Pag.10
Pag.11
Pag.11
Pag.11
Pag.12
Pag.12
Pag.13
Pag.14
Pag.14
Pag.15
Pag.16
Pag.16
Pag.19
Pag.20
-App. 1-SUBAPPENDICI:
App. 1-Subapp. 1: Trasformazioni di Lorentz consecutive.
App. 1- Subapp. 2: Effetto Doppler (relativistico) Trasversale.
App. 1- Subapp. 3: Le trasformazioni della quadrivelocit.
App. 1- Subapp. 4: Le trasformazioni della quadriforza.
App. 1- Subapp. 5: Il quadrivettore accelerazione e le trasformazioni delle accelerazioni.
App. 1- Subapp. 6: Come io vedo lUniverso (Unificazione Gravit Elettromagnetismo).
Pag.22
Pag.22
Pag.22
Pag.24
Pag.24
Pag.25
Pag.26
App. 1-Introduzione:
Tempo non niente altro che il nome che viene dato ad una relazione matematica di rapporto tra due spazi differenti;
quando dico che per andare da casa al lavoro ho impiegato il tempo di mezzora, dico semplicemente che il
percorrimento dello spazio che separa casa mia dallazienda in cui lavoro corrisposto allo spazio di mezza circonferenza
orologio percorsa dalla punta della lancetta dei minuti.
A mio avviso, nulla di misterioso o di spazialmente quadridimensionale dunque, come invece proposto nella TRR (Teoria
della Relativit Ristretta). A livello matematico, invece, il tempo pu essere s considerato una quarta dimensione, cos
come, se introduco la temperatura, ho poi una quinta dimensione, e cos via.
La velocit della luce (c=299.792,458 km/s) un limite superiore di velocit non per mistero inspiegabile o per principio,
come sostenuto nella TRR ed anche dallo stesso Einstein, ma bens perch (sempre a mio avviso) un corpo non pu
muoversi a casaccio ed a proprio piacimento, nellUniverso in cui in caduta libera a velocit c, in quanto lo stesso
vincolato a tutto lUniverso circostante, come se questultimo fosse una tela di ragno che, quando la preda cerca di
muoversi, condiziona il movimento della stessa, e tanto pi quanto i movimenti vogliono essere ampi (v~c), cio, per
restare allesempio della tela di ragno, se la mosca intrappolata vuole solo muovere unala, pu farlo quasi
incondizionatamente (v<<c), mentre se vuole proprio compiere delle volate da una parte allaltra della tela (v~c), la tela
si fa sentire (massa che tende allinfinito ecc). Si veda, a tal proposito, il Subappendice 1.6.
La teoria di Einstein si fonda comunque formalmente su due principi:
-Principio di Relativit: le leggi fisiche assumono la stessa forma in tutti i sistemi inerziali (cio in moto relativo a velocit
costante); non avendo infatti senso il moto assoluto rispetto ad un etere immobile che non esiste (vedi App.1-Par. 3.7)
tutti i sistemi di riferimento sono laboratori alla pari per verificarvi le leggi della fisica e non esistono dunque sistemi di
riferimento privilegiati (tranne che, a mio avviso, quello del centro di massa dellUniverso).
In ogni caso, lesperimento di Michelson e Morley (App.1-Par. 3.7) segn la fine delletere e spalanc le porte alla TRR.
-Principio di Costanza della Velocit della Luce: la velocit della luce nel vuoto ha in ogni sistema di riferimento inerziale
sempre il valore c=300.000 km/s.
Non importa dunque se la insegui a 299.000 km/s o se fuggi da essa sempre con tale velocit; la luce nel vuoto sfuggir
o ti rincorrer sempre a 300.000 km/s! (c=299.792,458 km/s)
Nellopinione di chi scrive, c nella TRR una forma di contraddizione; la velocit della luce appare infatti assoluta, non
relativa, parlandosi qui di relativit. Il fatto che le velocit tra i vari oggetti nellUniverso sono relative appunto tra
loro, ma esiste una velocit assoluta (o quasi) c con cui tutti gli oggetti nellUniverso cadono verso il centro di massa
dello stesso; da cui lassolutezza di c. E si spiega anche come mai gli oggetti in quiete risultano possedere energia m0c2
(App.1-Par. 2.4), energia che Einstein confer appunto alla massa in quiete, senza purtroppo dirci che tale massa invece
non mai in quiete, poich cade con velocit c verso il centro di massa dellUniverso, guarda caso. Si veda, a tal
proposito, la mia opinione personale completa, in merito, in Appendice 2.
Se giunge alle orecchie di un uomo comune il fatto che la luce ha velocit uguale per tutti gli osservatori inerziali,
quandanche con determinati moti relativi tra loro, la cosa pu cadere l. Se per giunge alle orecchie di un uomo
particolare, come Einstein, le conseguenze che questi pu intuire sono sconvolgenti. Questo piccolo esperimento che
segue, condotto con un orologio a luce a bordo di unastronave, dimostra che il fatto che la velocit della luce c per
tutti implica che il tempo sia relativo, da cui il Paradosso dei Gemelli (App.1-Par. 1.4) ecc:
contatore
00:01
00:02
sorgente di luce
00:02
V
ct
ct
ct
Vt
specchio
Fig. A1: Orologio a luce in quiete.
Come si vede dalla figura A1, ogni volta che la luce (frecce blu) compie il tragitto dalla sorgente allo specchio e ritorno,
lorologio a luce segna, ad esempio, un secondo, oppure un certo tempo t. Il tragitto in blu schematizzato in figura A1
visto da chi in quiete rispetto ad esso, cio con chi sullastronave con lorologio stesso. Chi invece sulla Terra e
osserva lorologio in viaggio sullastronave, vedr la luce compiere tragitti obliqui e pi lunghi, come in figura A2, in
quanto, mentre la luce scende, lo specchio si sposta, e mentre risale, la sorgente si sposta ancora. Ora, parlandosi qui di
luce, il comportamento della stessa, mentre scende, non come quello di una valigia che cade dalla cappelliera di un
vagone ferroviario, che vista cadere verticalmente dal passeggero e in traiettoria parabolica dallosservatore fermo
sulla banchina della stazione, impiegando per entrambi lo stesso tempo di caduta, in quanto nel secondo caso
(parabolico) la velocit di caduta risulta maggiore; qui si parla appunto di luce, dunque la sua velocit deve essere la
stessa per tutti, e cio c; ma, se cos , allora chi osserva il tragitto obliquo pi lungo deve concludere che il tempo
impiegato dalla luce per compiere un ciclo di discesa e risalita deve essere pi lungo. Dunque, pur parlandosi dello
stesso orologio e dello stesso evento, i due osservatori, sulla durata, giungono a risultati diversi, e dunque alla relativit
del tempo ed a tutte le sue conseguenze.
Applicando il Teorema di Pitagora al triangolo di figura A2, si ha:
c t = c t ' +V t
2 2
2 2
2 2
, da cui:
V2
t'= t 1 2
c
e cio, in generale:
t'< t
che t il tempo dellastronauta in viaggio con lorologio a luce, mentre t il tempo trascorso sulla Terra. Se il fenomeno
vero per la cosa pi veloce che esiste (la luce), figuriamoci per gli orologi tradizionali a lancette e per quelli biologici
(esseri viventi)!
Negli anni settanta, utilizzando i sensibilissimi orologi atomici, stata dimostrata la dilatazione del tempo, sulla Terra, tra
due orologi atomici inizialmente sincronizzati, dopo che uno dei due ha compiuto un volo aereo, subendo una
leggerissima, ma ben rilevata, dilatazione del tempo.
App. 1-Capitolo 1: Concetti introduttivi fondamentali.
App. 1-Par. 1.1: Trasformazioni di Galilei.
Le stesse forniscono semplicemente le relazioni tra coordinate spaziali (e tempo), per due sistemi di riferimento in moto
relativo, ma nellambito della fisica classica, dove cio la velocit della luce c non un limite superiore.
y
P
r
r
0
r
V
r
r'
0
x _ x
z
Fig. A1.1: Sistemi di riferimento in moto relativo.
Si ha ovviamente che:
r r
r r
r = r '+00' = r '+Vt ,
(A1.1)
{
{
x = x'+Vt '
y = y'
z = z'
t = t'
(A1.2)
x' = x Vt
y' = y
z' = z
t' = t
(A1.3)
r r r
v = v '+V che vale come teorema di addizione delle velocit della fisica classica.
x = k ( x '+Vt ' )
(A1.5)
V2
c tt ' = k tt ' c (1 2 ) , da cui:
c
1
1
=
k=
1 2
V2
1 2
c
1 x
( x' ) ed usando in questultima la (A1.4), si ha:
Inoltre, dalla (A1.5) si ha: t ' =
V k
1 x
1
1
kx
x
V
t ' = [ k ( x Vt )] =
x + kt = k [t (1 2 )] = k[t 2 x]
V k
kV
V
V
k
c
2
1
V
in quanto, per la (A1.6), si ha che: (1 2 ) = 2 .
k
c
2
(A1.6)
(A1.7)
Con lo stesso procedimento che ci ha condotti alla (A1.7) si deduce poi anche lespressione per t.
In conclusione, ecco le Trasformazioni di Lorentz:
{
{
x' =
( x Vt )
1 2
y' = y
z' = z
t'=
(A1.8)
V
x)
c2
1 2
(t
x=
( x'+Vt ' )
1 2
y = y'
z = z'
V
( t '+ 2 x ' )
c
t=
1 2
(A1.9)
-SECONDA DEDUZIONE:
Sappiamo che c=cost in tutti i sistemi di riferimento. Ora, con riferimento alla Fig. A1.1, quando 0=0 e t=t, dallorigine
viene emessa luce per onde sferiche ed in modo isotropico e si pu dunque scrivere che:
c 2t 2 ( x 2 + y 2 + z 2 ) = 0
2 2
(A1.10)
ed in forma differenziale:
A(1.11)
dx
= 0,
dt
dx'
= V , in quanto il sistema (0,x,y,z) si muove con velocit V rispetto a 0 e di
dt '
d
V
d '
=0 e
= i , ma dal rapporto tra le (A1.11) si ha che:
d
c
d '
d
cos sin
V
d ' d cos d sin d
0 sin
= tg e dunque: tg = i = i
=
=
=
d
c
d ' d sin + d cos
sin + cos 0 + cos
d
1
1
ma sappiamo dalla trigonometria che: cos =
=
e:
2
1 + tg
1 2
tg
i
sin =
=
e dunque le (A1.10) diventano:
2
1 + tg
1 2
stesso. Invece,
'=
{
x' =
'=
i +
ossia:
1 2
( x Vt )
y' = y
z' = z
t' =
conseguenza:
1 2
x)
c
1 2
(t
xB x A = l
( xB Vt B ) ( x A Vt A )
1
( xB x A )
1
l
1 2
=v c
rilevata in O sar pari a quella l rilevata in O per una quantit minore di 1, cio losservatore immobile (O) vedr un
oggetto pi corto.
t = t B t A =
t =
t '
1 2
=v c
t ' !
Due gemelli si separano perch uno dei due parte per un viaggio spaziale di un mese a velocit vicine a quelle della luce;
ritornato sulla Terra trova il suo gemello invecchiato di trentanni! (Paradosso dei Gemelli)
A circa 260.000 km/s si ha il dimezzamento, cio il radicale varr e i due tempi scorreranno uno la met dellaltro.
Si veda poi anche la dimostrazione della dilatazione del tempo con lorologio a luce (in Introduzione) e quella in chiave di
Effetto Doppler Relativistico (App.1-Par. 3.6).
App. 1-Par. 1.5: Il quadrivettore posizione.
Invece di scrivere i vettori posizione con le classiche tre componenti x, y e z, scriviamoli in forma matematicamente
quadridimensionale, aggiungendo anche il tempo; ci ci torner molto utile. Preciso per che, nellopinione (motivata) di
chi scrive, il nostro Universo e resta a tre dimensioni e laggiunta di una quarta dimensione un fatto puramente
matematico; sfido infatti chiunque ad indicarmi col dito indice la quarta dimensione di un qualsivoglia oggetto presunto
quadridimensionale. Nella TRR di oggigiorno, si parla invece di una effettiva quarta dimensione!
Bene, allora:
x'1 = x1 x4
x'2 = x2
x'3 = x3
x'4 = x1 + x4
Con
=V c
x1 = x'1 + x '4
x2 = x '2
x3 = x'3
x4 = x'1 +x'4
1
1 2
(A1.12)
Si pu verificare che la distanza spazio-temporale tra due punti invariante per Trasformazioni di Lorentz, cio la
stessa in tutti i sistemi di riferimento inerziali:
(x) 2 = (x1 ) 2 + (x2 ) 2 + (x3 ) 2 (x4 ) 2 = (x ') 2 = (x'1 ) 2 + (x'2 ) 2 + (x'3 ) 2 (x'4 )2
(A1.13)
0
( x '1 , x'2 , x'3 , x'4 ) =
0
0 1
( x1 , x2 , x3 , x4 ) =
0 0
0
1
0
0
0
0
1
0
0 x1
0
0 x2
1
0 x3
0
x4
x'1
0 x '2
0 x '3
x '4
(A1.14)
(A1.15)
x'i = ik xk
(A1.16)
xk = 'ik x'i
(i,k=1,2,3,4)
(A1.17)
vx = dx dt
v y = dy dt
vz = dz dt
dx =
1 2
dy = dy '
dz = dz '
V
(dt '+ 2 dx' )
c
dt =
1 2
(dx'+Vdt ' )
vx = dx =
dt
V
(dt '+ 2 dx ' )
c
dy ' 1 2
dy
v y = dt =
V
(dt '+ 2 dx' )
c
dz ' 1 2
vz = dz dt =
V
(dt '+ 2 dx' )
c
da cui:
(v 'x +V )
Vv '
(1 + 2 x )
c
v' y 1 2
vy =
Vv '
(1 + 2 y )
c
vx =
(v x V )
Vv
(1 2x )
c
vy 1 2
v' y =
Vv
(1 2y )
c
v' x =
(A1.18) e analogamente:
v' 1 2
vz = z
Vv '
(1 + 2 z )
c
v << 1
Per V << 1 e x
c
c
v' z =
vz 1 2
Vv
(1 2z )
c
Per rifarsi un attimo al caso del vagone ferroviario in cui una persona cammina allinterno, se si pone
e
vx =
e se
(v 'x +V )
Vv '
(1 + 2 x )
c
v' x = V = c ,
(A1.19)
allora
vx = c ,
corro a velocit c, io, rispetto alla banchina, avr una velocit risultante pari a c e non a 2c!
La (A1.19) rappresenta il Teorema Relativistico di Addizione delle Velocit.
Altro esempio: due missili che viaggiano ciascuno a velocit c/2 si incrociano; a che velocit
vx =
(c 2 + c 2)
c
4
=
= c<c
2
c
54 5
(1 + 2 )
4c
vx
si incrociano dunque?
di una particella.
Se una particella ferma in (O,x,y,z), ossia se la stessa si muove appunto con O, ossia se O il suo sistema di
riferimento proprio, allora: dx= dy= dz=0 e:
ds
dx 2 + dy 2 + dz 2
1 dl 2
v2
= 1
dt
=
1
(
)
=
1
dt
c
c 2 dt 2
c 2 dt
c2
ds
).
c
Dunque, quando si eseguono calcoli riguardanti una particella, viene spontaneo utilizzare per essa appunto il suo tempo
proprio:
d = (1
v2
dt
)dt =
2
c
dx
m dx m dx m dx m dx
dx
dx
dx1
, m0 2 , m0 3 , m0 4 ) = ( 0 1 , 0 2 , 0 3 , 0 4 ) =
d
d
d
d
1 dt 1 dt 1 dt 1 dt
r
r
dx
dx
dx
dx
= (m 1 , m 2 , m 3 , m 4 ) = (mv , mc) = ( p, mc) = p
dt
dt
dt
dt
r
r
dove v il vettore (tridimensionale) velocit, p il momento lineare tridimensionale,
dt
m
dx
il tempo proprio e m = 0 = m0
mc = m 4 la componente quadridimensionale, d =
1
dt
p = (m0
la massa
m02
(c 2 v 2 ) = m02c 2 = costante, cio non funzione di v.
v2
(1 2 )
c
v=
dx
d
lo .
Si ha:
v=(
r
dx1 dx2 dx3 dx4
dx
dx
dx
dx
,
,
,
) = ( 1 , 2 , 3 , 4 ) = (vx , v y , v z , c ) = (v , c)
,
d d d d
dt
dt
dt
dt
v = 2 v 2 2 c 2 = c 2
(costante!).
(A2.1)
r
r
d r d
d
d
p, (m0c)) = ( (m0v ), (m0c )) ;
= ( F1 , F2 , F3 , F4 ) = ( F , F4 ) = (
d
d d
dt
dt
r
r
r
d
si ha dunque che:
(m0v ) = f = F ,
dt
r
r
d
(
(m0v ) = f la forza classica e a maggior ragione quando = 1 )
dt
r
F
d r
d r
da cui:
(v ) =
=
(v ) , cio, in componenti:
dt
m0 d
F=
dp
(A2.2)
(A2.3)
F
d
d
(vi ) = i =
(vi )
m0 d
dt
(i=x,y,z)
(A2.4)
d
(m0c ) = F4
dt
(A2.5)
F
d
d
(c ) = 4 =
(c) .
m0 d
dt
(A2.6)
v = 2v 2 2c 2 = 2 v x2 + 2 v 2y + 2 v z2 2 c 2 = c 2 , ottenendo:
d
d
d
d
d
d
(v x ) 2 +
(v y )2 +
(vz ) 2
(c) 2 ) = (2vx
(v x ) + 2v y
(v y ) +
d
d
d
d
d
d
d
d
(v z ) 2c (c ))
+ 2vz
d
d
d
d
d
d
(vx ) + v y
(v y ) + +vz
(vz ) c (c)) , ossia, per la (A2.4) e la (A2.6):
cio: 0 = (vx
d
d
d
d
0=(
0 = (vx
F
F
F
Fx
+ v y y + +vz z c 4 )
m0
m0
m0
m0
f
f x
f
F
+ v y y + +vz z c 4 )
m0
m0
m0
m0
r
r
F4 = ( f v ) .
c
0 = (vx
e per la (2.3) (
r r
f = F ):
, cio:
(A2.7)
F=
r r r
= (f , ( f v ))
d
c
dp
(A2.8)
d
r r
(m0c ) = F4 , mentre per la (A2.7) si ha: F4 = ( f v ) . Dunque:
dt
c
r
r
d
r r
d
(m0c) = ( f v ) , ossia: (m0c 2 ) = f v , ossia ancora:
dt
dt
r cr
2
d (m0c ) = f v dt = dL = dE
(A2.9)
La (A2.9) esattamente lespressione dellenergia in fisica classica se = 1 ; lintegrazione della (A2.9) con costante
Per la (A2.5) si ha che:
E = m0c 2
(A2.10)
In realt la (A2.10) vale solo per energie guadagnate (come negli acceleratori di particelle), mentre per energie cedute
(Universo collassante o Fisica Atomica degli elettroni che scendono di livello) vale la seguente, che io mi attribuisco:
E=
1
m0c 2
(Rubino)
(si veda anche lAppendice 2; per una convincente dimostrazione della stessa, prego contattarmi:
leonrubino@yahoo.it ).
Dunque, una particella di massa m0 possiede energia totale:
E = m0c 2 =
m0c 2
(A2.11)
v2
(1 2 )
c
e a riposo ( v = 0 e dunque = 1 ) energia di riposo:
E0 = m0c 2
(A2.12)
1 2 3 4
=
1
+
+ + .....
8
2
(1 2 )
EK = m0c 2 ( 1) = m0c 2 (
cinetica!
1)
v2
(1 2 )
c
1
1
=
=
v2
(1 2 )
(1 2 )
c
, cio:
1 v2
1
) = m0 v 2
2
2c
2
( 1)
1 2 1 v2
=
2
2 c2
(A2.13)
e per la (A2.13):
Si veda poi la deduzione della (A2.13) in Appendice 2, a partire dalle caratteristiche dellUniverso in contrazione.
App. 1-Capitolo 3: Fenomeni relativistici.
App. 1-Par. 3.1: Tempo e gravit: la gravit rallenta il tempo!
Anche la gravit rallenta il tempo! In montagna il tempo scorre pi velocemente che a valle. Ovviamente, sulla Terra, la
differenza impercettibile, ma su una stella di neutroni, o in un buco nero, leffetto intensissimo.
Fotone in discesa
con freq. aumentata
dalla gravit
E = h
, ma in relativit: E
= m0c 2 , da
m0 = h c 2 e dunque, per :
V=
2GM
R
. Se su quel corpo un
oggetto viene lanciato verticalmente alla velocit di fuga, esso uscir dal campo gravitazionale del corpo celeste ed andr
verso linfinito, senza pi ricadere.
Un buco nero un corpo cos compresso (M grande ed R piccolo) che la velocit di fuga sulla sua superficie raggiunge il
valore della velocit della luce e dunque neanche la luce vi sfugge, da cui il nome di buco nero; inoltre, per quanto detto
sopra, si pu affermare che in un buco nero il tempo pressoch fermo!
L
L
z
y
A
Lsin
V
V
--Osservatore
Fig. A3.2: Corpo visto in quiete.
1 2
2 2 2 1 2
0
+
+
=
=
=
c 2 t 2
x 2 y 2 z 2 c 2 t 2
Ora notiamo preliminarmente che, per le Trasformazioni di Lorentz, si ha (derivando le stesse):
y ' z '
x' x' y '
x'
x '
t '
V t'
=
= 1,
=
=
= ...... = 0
= ,
= V ,
= 2 ,
= ,
y z
y z x
x
t
x
c
t
r
Per lanalisi matematica, si ha, in 0: = ( r ' , t ' ) , e dunque:
x ' y ' z ' t '
=
+
+
+
=
+ (V )
x x ' x y ' x z ' x t ' x
x'
t '
2
2 V 2 2
2V
2
=
(
+
)
x 2
x '2 c 4 t '2
c 2 V 2 x' t '
= V
+
t '
t
x'
; inoltre:
2
2
2
2
2
2
=
(
V
+
)
2
V
t 2
x '2 t '2
x ' t '
2 2 2 1 2 2 2 2 1 2
+
+
=
+
+
c.v.d.
2 2
=
y 2 y '2
2 2
=
z 2 z '2
Acqua
P=lamina semitrasparente
Prisma inverso
Specchio
P
V
Sorgente di luce
Acqua
v=
c 3 108 m / s
=
225.000km / s ,
n
1,33
dellacqua. Se ora lacqua, o comunque il fluido nel quale si va a misurare la velocit della luce, scorre a sua volta con
velocit V, allora, secondo i risultati di Fizeau, la velocit complessiva della luce nel fluido in scorrimento :
v=
c
1
+ V (1 2 ) ,
n
n
(A3.1)
in totale disaccordo con la fisica classica, secondo cui si dovrebbe avere pi semplicemente:
v=
c
+V
n
Anni dopo, la TRR ha dato una spiegazione teorica della (A3.1). Infatti, per il Teorema di Addizione delle Velocit
espresso dalla (A1.19), si pu scrivere che:
c
c
( +V) ( +V)
v = n
= n
Vc
V
(1 + 2 ) (1 + )
nc
nc
c
c
V
c
1
V2
( + V ) ( + V )(1 )
+ V (1 2 )
nc = n
n
nc
v = n
= n
V
V 2
V 2
(1 + )
1 ( )
1 ( )
nc
nc
nc
, ma le quantit
(1
V2
nc
V
) , si ha:
nc
a numeratore e
V 2
)
nc
denominatore sono ciascuna trascurabile (<<1) rispetto agli altri addendi e possono essere appunto trascurate, da cui
lasserto:
v=
c
1
+ V (1 2 ) .
n
n
Antenna Sorgente S
Antenna Ricevitore R
Fig. A3.5: Effetto Doppler longitudinale (esempio di sorgente S in allontanamento da R con velocit V ()).
Lantenna sorgente invia a quella ricevente segnali elettromagnetici di periodo TS;
Per il fenomeno della dilatazione del tempo lantenna ricevente li ricever con un periodo TS tale che:
T 'S =
TS
(1 2 )
VT 'S V
T 'S =
=
c
c
TR = T 'S + T 'S =
=
TS
(1 )
2
TS
(1 2 )
TS
(1 + ) = TS
(1 )
che riscriviamo:
TR = TS
=
+
TS
(1 2 )
TS
(1 2 )
T 'S tra
TS
(1 2 )
(1 + ) =
TS
(1 + ) =
(1 ) (1 + )
(1 + )
= TR
(1 )
(1 + )
(1 )
; (S ed R in allontanamento)
(A3.2)
lo stesso vale se il ricevitore ad allontanarsi. Se poi S ed R sono in avvicinamento, per gli stessi ragionamenti, vale la
seguente:
TR = TS
(1 )
(1 + )
(S ed R in avvicinamento).
(A3.3)
V2
9c 2
)
=
50
min
(
1
) =40min
c2
25c 2
Invece, sotto unanalisi Doppler del fenomeno, possiamo dire che, per la (A3.2), il gemello sulla Terra (old) trasmette i
suoi battiti cardiaci ogni secondo, ma dal gemello in viaggio essi verranno ricevuti, nella fase di andata, ogni due
secondi; infatti, durante landata (to):
(1 + )
1 + (3 / 5)
= 1s
= 2 s e dunque, durante landata, il gemello in viaggio, il cui tempo
(1 )
1 (3 / 5)
di andata di 20 min=1200s=1200 battiti, ha ricevuto dal fratello sulla Terra un battito ogni 2s, cio solo 600 battiti.
Dunque, il gemello in volo, durante i suoi 20 min(=1200s) di andata, ha constatato su se stesso ovviamente 1200 battiti
e ne ha ricevuti per solo 600 del fratello sulla Terra.
Dopo 20 min del gemello in volo, la rotta si inverte ed inizia il ritorno verso la Terra, di altri 20 min (sempre secondo il
tempo del gemello in volo). In questi altri 20 min di ritorno (from), per, il gemello sulla Terra trasmette sempre ogni
secondo, ma quello in volo ora riceve ogni mezzo secondo; infatti, ora, per la (A3.3):
(1 )
1 (3 / 5)
= 1s
= 0,5s , dunque, durante questi suoi altri 20 min=1200s=
(1 + )
1 + (3 / 5)
=1200 battiti su se stesso, il gemello in volo riceve ben 2400 battiti dal fratello dalla Terra.
Dunque, il gemello in volo, durante gli altri suoi 20 min(=1200s) di ritorno, ha constatato su se stesso ovviamente altri
1200 battiti e ne ha ricevuti per ben 2400 dal fratello dalla Terra.
Riassumiamo:
in totale, durante il suo intero viaggio di 20+20=40 min, il gemello in volo ha contato ovviamente 1200+1200=2400
battiti cardiaci su se stesso e ben 600+2400=3000 battiti cardiaci dal fratello gemello rimasto sulla Terra.
Deve per forza ritenersi pi giovane!!!
App. 1-Par. 3.7: LEsperimento di Michelson e Morley.
S specchio semiriflettente
S1, S2 - specchi
S1
r1
L sorgente luminosa
S2
S
r2
Cannocchiale e interferometro
Fig. A3.6: Apparecchiatura di Michelson (interferometro).
S
S1
V t2
2
S2
c+V
l1
S
S
c-V
l2
c
c V
2
Prima di Einstein si pensava che le onde elettromagnetiche, e dunque anche la luce, dovessero necessariamente
propagarsi in un mezzo, cos come avviene per le onde sonore nellaria. Si suppose dunque che lo spazio fosse permeato
da un gas invisibile e leggerissimo, detto etere. La Terra ruota intorno al Sole con una velocit V di circa 30 km/s,
dunque si muoverebbe nelletere con tale velocit e la luce emessa da una sorgente luminosa solidale con la Terra stessa
dovrebbe dunque avere, in generale, una velocit diversa da c (cV lungo la direzione di moto della Terra e c 2 V 2
trasversalmente).
Nel 1886 si inizi a preparare lesperimento, che doveva dimostrare il movimento della Terra nelletere. A Cleveland
venne bloccato il traffico durante lesperimento, per evitare vibrazioni; lapparecchiatura fu posta su una lastra di pietra
galleggiante in un pozzo di mercurio, per effettuare la rotazione dellapparecchiatura di 90 senza vibrazioni.
Ora, con l1 lungo il moto della Terra, per il cammino di andata e ritorno compiuto dalla luce, si ha:
2l
1
l1
l
+ 1 = 1
c +V c V
c (1 V 2 c 2 )
2l
2l
1
t2 = 2 2 2 = 2
c (1 V 2 c 2 )
c V
t1 =
Facendo giungere i due raggi su un interferometro per farli appunto interferire, gli stessi giungerebbero con un t pari a:
2
2
l2
l1
t = t2 t1 = (
) [l2 (1 + V 2 2c 2 ) l1 (1 + V 2 c 2 )]
2
2
2
2
c (1 V c ) (1 V c )
c
V c 104 , V 2 c 2 108 e (1 + x )k 1 + kx .
7
donda della luce utilizzata era = 5,5 10 m e sappiamo
in quanto si ha che
La lunghezza
possiamo dunque scrivere la seguente proporzione che coinvolge langolo di sfasamento tra i due raggi e la differenza
di cammino ct:
ct
=
2
, da cui:
2ct
.
Fissando la lunghezza di un braccio e regolando quella dellaltro tramite una vite micrometrica, si pu rendere ct
dellordine di , realizzando il fenomeno di interferenza voluto.
Ora, senza variare la geometria dellapparecchiatura, la si ruoti di 90; i ruoli di l1 ed l2 si invertiranno e si avr:
2
2
l1
l2
) [l1 (1 + V 2 2c 2 ) l2 (1 + V 2 c 2 )]
t ' = t '2 t '1 = (
2
2
2
2
c (1 V c ) (1 V c )
c
e inoltre si avrebbe:
' ct ct ' l1 + l2 V 2
22m
=
=
=
=
10 8 0, 4 ,
2
7
2
2
c
5,5 10 m
dellinterferometro si dovrebbe osservare uno spostamento delle frange di interferenza pari a 0,4 volte la distanza fra
due massimi successivi.
In realt, nulla di tutto ci fu osservato, nonostante la sensibilit degli strumenti fosse tale che si potesse avere anche
= 0,01
2
Michelson si dichiar dunque deluso dallesperimento, visto che non venne dimostrato il movimento della Terra nelletere.
La questione venne risolta nel 1905 da un impiegato dellUfficio Brevetti di Berna, un certo Albert Einstein, che sugger di
cessare di cercare di dimostrare il moto della Terra nelletere, per il semplice fatto che letere non esiste!
Aggiungo io che la materia oscura dei giorni nostri presto far la stessa fine.
App. 1-Capitolo 4: LElettrodinamica relativistica.
App. 1-Par. 4.1: La forza magnetica niente altro che una (relativistica) forza elettrica di Coulomb(!)
A tal proposito, immaginiamo la seguente situazione, dove vi un conduttore, ovviamente composto da nuclei positivi e
da elettroni, e poi un raggio catodico (di elettroni) che scorre parallelo al conduttore:
Raggio catodico
e
Conduttore
e-
e-
e-
e-
e-
e-
e-
e-
e-
e-
p+
p+
p+
p+
p+
p+
p+
p+
p+
p+
Fig. A4.1: Conduttore non percorso da corrente, visto dal sistema di riferimento I (x, y, z) di quiete del raggio catodico.
Sappiamo dal magnetismo che il raggio catodico non sar deflesso verso il conduttore perch in questultimo non scorre
nessuna corrente che possa determinare ci. Questa linterpretazione del fenomeno in chiave magnetica; in chiave
elettrica, possiamo dire che ogni singolo elettrone del raggio respinto dagli elettroni del conduttore con una forza Fidentica a quella F+ con cui attratto dai nuclei positivi del conduttore.
Passiamo ora alla situazione in cui nel conduttore scorra invece una corrente con gli e- a velocit u:
Raggio catodico
e
ep+
p+
ep+
z
-
e-
e-
Conduttore
ep+
F
e-
e-
p+
p+
p+
ep+
ep+
p+
Fig. A4.2: Conduttore percorso da corrente (con gli e- a velocit u), visto dal sistema di riferimento I (x, y, z) di quiete
del raggio catodico.
In questultimo caso, sappiamo dal magnetismo che il raggio di elettroni deve deflettere verso il conduttore, in quanto
siamo nel noto caso di correnti parallele e di verso concorde, che devono dunque attrarsi. Questa linterpretazione del
fenomeno in chiave magnetica; in chiave elettrica, possiamo dire che dal momento che gli elettroni nel conduttore
inseguono, per cos dire, quelli del fascio, i primi, visti dal sistema di quiete del fascio (I), avranno una velocit minore
rispetto a quella che risultano avere i nuclei positivi, che invece sono fermi nel conduttore. Risulter, perci, che gli spazi
immaginabili tra gli elettroni del conduttore subiranno una contrazione relativistica di Lorentz meno accentuata, rispetto
ai nuclei positivi, e dunque ne risulter una densit di carica negativa minore della densit di carica positiva, e dunque gli
elettroni del fascio verranno elettricamente attratti dal conduttore. Ecco la lettura in chiave elettrica del campo
magnetico. Ora, vero che la velocit della corrente elettrica in un conduttore molto bassa (centimetri al secondo)
rispetto alla relativistica velocit della luce c, ma anche vero che gli elettroni sono miliardi di miliardi , e dunque un
piccolo effetto di contrazione su cos tanti interspazi determina lapparire della forza magnetica.
Ora, per, vediamo se la matematica ci d quantitativamente ragione su quanto asserito, dimostrandoci che la forza
magnetica una forza elettrica anchessa, ma vista in chiave relativistica. Consideriamo allora una situazione semplificata
in cui un elettrone e- , di carica q, viaggi, con velocit v, parallelo ad una corrente di nuclei con carica Q+ (a velocit u):
y
r
Q+
Q+
z
-
F
Q+
Q+
Q+
Q+
d = d 0 1 u 2 c2
x
Fig. A4.3: Corrente di cariche positive (a velocit u) ed elettrone a velocit v nel sistema di quiete del lettore I.
= N Q N d = Q d
Ora, sempre con riferimento alla Fig. A4.3, nel sistema I, per lelettromagnetismo lelettrone sar sottoposto alla forza di
Lorentz
Fel = E q = (
1 Q d
1
)q
)q = (
0 2r
0 2r
e:
Fmagn = 0
Dunque:
I
Q t
Q (d u )
uQ d
= 0
= 0
= 0
2r
2r
2r
2r
Fl = q (
(Biot e Savart).
1
1 Q d
Q d0 1
uQ d
)=q
( 0 uv )
v0
2r
2r 0
0 2r
1 u 2 c2
(A4.1)
dove il segno meno indica che la forza magnetica repulsiva, in tale caso, visti i segni reali delle due correnti, e dove la
distanza d0 di quiete risulta contratta a d, per Lorentz, nel sistema I in cui le cariche Q hanno velocit u
(d
= d0 1 u 2 c 2
).
F 'el = E 'q = (
1 '
1 Q d'
1 Q d0
1
)q = (
) q = q(
)
0 2r
0 2r
0 2r
1 u '2 c 2
(A4.2)
dove u la velocit della distribuzione di cariche Q nel sistema I, che si compone di u e v tramite il noto teorema
relativistico di addizione delle velocit:
u ' = (u v) (1 uv c 2 )
(A4.3)
d ' = d 0 1 u '2 c 2
Notiamo ora che, con un po di algebra, vale la seguente relazione (vedi la (A4.3)):
1 u '2 c 2 =
(1 u 2 c 2 )(1 v 2 c 2 )
(1 uv c 2 ) 2
F 'el = E 'q = (
1 '
1 Q d'
1 Q d0
(1 uv c 2 )
)q = (
) q = q(
)
0 2r
0 2r
0 2r
1 u 2 c2 1 v 2 c2
(A4.4)
Vogliamo ora confrontare la (A4.1) con la (A4.4), ma ancora non possiamo, perch una fa riferimento ad I e laltra ad I;
rapportiamo allora
I:
F 'el
della (A4.4) in I anchessa e, per fare ci, osserviamo che, per la definizione stessa di forza, in
p I '
pI
Fel (in _ I )
=
=
t I ' t I 1 v 2 c 2
1 v2 c2
, con
pI ' = pI
in quanto
lungo la direzione del moto relativo, dunque per le T. di Lorentz non subisce variazione, mentre
Si ha allora:
1 Q d0
(1 uv c 2 )
)
1 v 2 c2
2
2
2
2
0 2r
1 u c 1 v c
ovviamente s.
(A4.5)
Ora, dunque, possiamo confrontare la (A4.1) con la (A4.5), in quanto ora entrambe fanno riferimento al sistema I.
Riscriviamole una sopra laltra:
Fl (in _ I ) = q (
1
1 Q d
Q d0 1
uQ d
)=q
( 0 uv)
v0
2r
2r 0
0 2r
1 u 2 c2
Fel (in _ I ) = q (
1
1 Q d 0 (1 uv c 2 )
Q d0 1
uv
)
(
)
=q
2
2
2
2r 0 0 c
0 2r
1 u c
1 u2 c2
Possiamo dunque dire che le due equazioni sono identiche se verificata la seguente identit:
c =1
00
, e la
stessa nota sin dal 1856. Essendo dunque identiche le due equazioni, la forza magnetica risulta ricondotta ad una forza
elettrica di Coulomb, e dunque compiuta lunificazione dei campi elettrico e magnetico!!
App. 1-Par. 4.2: Il quadrivettore densit di corrente.
Si hanno ovviamente le seguenti equazioni sulla densit di carica:
0 =
dQ
dt0
dQ
dQ
=
= 0
d
1 2 dt0
Si noti poi che vale la seguente equazione che testimonia anche linvarianza della carica elettrica:
Sappiamo poi dalla fisica che la densit di corrente vale
r
r
j = v .
0 dt0 = d
Viene allora spontaneo definire il quadrivettore densit di corrente nel seguente modo:
r
r
j = ( j , c) = (0 v , 0 c) ; si noti la similitudine con il quadrivettore momento-energia:
r
r
p = ( p, mc) = (m0 v , m0 c) . Si ha poi:
r2
2
j = j j42 = 02 c 2 e inoltre, potendo applicare le Trasformazioni di Lorentz ad un quadrivettore, come detto allo
j1 ' = j1 j4
j ' 2 = j2
j '3 = j3
j ' z = jz
oppure anche:
j '4 = j1 + j4
con
=V c
j x ' = ( j x V )
j' y = j y
'= (
1
1 2
(A4.6)
V
jx )
c2
Adesso, al fine di mostrare con i quadrivettori e in modo pi compatto quanto esposto all App.1-Par. 4.2, consideriamo
un filo percorso da corrente stazionaria I in un riferimento k e sia I diretta lungo x; se in tale sistema si pone una carica
q con velocit v lungo x, si ottiene un movimento di q ad opera del solo campo B, poich E=0, in quanto, in media, vi
sono in un conduttore tante cariche positive quante sono quelle negative. Se per ci poniamo ora in un sistema k che si
muove con velocit V=v rispetto a k, in k q ferma ed in teoria dovrebbe scomparire la forza magnetica; ma ci
contrario al Principio di Relativit (vedi Introduzione). Deve quindi comparire in k un campo elettrico; infatti:
r
j = j + + j , j + = ( j+ , c + ) = (0, nqc ) [n]=[numero di q coinvolte/m3] e
r
r
j = ( j , c ) = ( nqv , nqc ) , il primo termine qui negativo perch
convenzionale di I (in quanto qui q<0) ed il secondo termine anche negativo, sempre perch qui q<0.
Per le Trasformazioni di Lorentz (A1.12) si ha allora (v=V):
j '+ x == nqV
'+ = nq
ed essendo ora
Aik = cibk
ci = il c'l
(i,m=1,2,3,4)
bk = kmb'm
(k,l=1,2,3,4) e dunque:
(A4.7)
x'm
mk
xk
bi
b x 'm
x'
b'l
= i
=
( il b'l ) m = il mk
x'm
xk x'm xk
xk
x'm
bi = il b'l
x'm = mk xk
>>>
r
r
r
A
E =
t
r r r
B = A
(A4.8)
(A4.9)
r r
j +
= 0.
t
r r 1 r r
A+ 2
= A +
=0
c t
t
(A4.10)
(A4.11)
1 2
2 2 = =
c t r
r 1 2 A
r
r
A 2 2 = j = A
c t
(A4.12)
(A4.13)
r
j = ( j , c ) = ( j x , j y , j z , c )
ji = vi ).
------------------
k = jk
e definendo la quadridivergenza
r
r
div4 = 4 =
+
+
+
= ( +
)
x y x (ct )
(ct )
si ha anche,
banalmente:
r
4 j = 0
r
4 = 0
------------------
Bx = B1 =
Az Ay 3 2
=
y
x3
x2
z
Ex = E1 =
Ax
= c( 4
)
x
t
x1
x4
esprimibili tramite due quadrivettori, ma sono esprimibili insieme tramite un quadritensore di rango 2, in quanto
dimostrammo che la derivata di un vettore un tensore 2:
Fik = c(
k i
cBz
Fik =
cBy
E
x
modo:
cBz
0
cBx
Ey
cBy
cBx
0
Ez
Ex
Ey
Ez
Fik = il km F 'lm .
(A4.14)
cB' z
F 'ik =
cB' y
E'
x
cB'z
0
cB'x
E'y
cB' y
cB'x
0
E'z
E'x
E'y
E 'z
Ricordando ora che a secondo membro della (A4.14) sottintesa la sommatoria su l ed m, che sono infatti ripetuti, e
sviluppando appunto tale equazione, otteniamo le trasformazioni del campo elettromagnetico:
{
{
Ex = E ' x
E y = ( E ' y +VB' z )
Ez = ( E 'z VB ' y )
E 'x = E x
E ' y = ( E y VBz )
E ' z = ( Ez + VBy )
{
{
Bx = B'x
V
E 'z )
c2
V
Bz = ( B'z + 2 E ' y )
c
By = ( B' y
B' x = Bx
V
Ez )
c2
V
B ' z = ( Bz 2 E y )
c
B ' y = ( By +
App. 1-SUBAPPENDICI:
App. 1-Subapp. 1: Trasformazioni di Lorentz consecutive.
k >>> V >>> k >>> W >>> k
Abbiamo tre sistemi di riferimento k, k e k e V e W sono le rispettive velocit relative.
Con le seguenti notazioni:
1 =
V
c
2 =
W
c
1 = 1 1 12
2 = 1 1 22
U=
V +W
VW
1+ 2
c
U
c
x = 1 ( x '+Vt ' )
con
con
1
x' )
c
t = 1 (t '+
e
e, per sostituzione:
x = 1 2 ( x ' '+Wt ' '+Vt ' '+ 1 2 x' ' ) = 1 2 [(1 + 1 2 ) x' '+ (V + W )t ' ' ] =
= 1 2 (1 + 1 2 )( x ' '+
e analogamente:
V +W
t' ') = x
1 + 1 2
(A.1.1)
1 V +W
x' ' ) ;
c 2 (1 + 1 2 )
(A.1.2)
1 2 (1 + 1 2 ) = 1
=1
(1 12 )(1 22 ) (1 + 1 2 ) 2 = 1
[1 + 12 22 + 2 1 2 (12 + 22 + 2 1 2 )] (1 + 1 2 ) 2 =
2
1 [(1 + 2 ) (1 + 1 2 )] = 1 1 U 2 c 2 = , e quindi le (A.1.1) e (A.1.2) si riscrivono cos:
con
r r
r 2
r
2
e =
per cui:
E = E0 e i (t k r ) ; tale campo si propaga lungo r e sappiamo che k =
T
r
r
T r
(A.2.1)
k = T , cio: k = = = k ;
c
r r
I = t k r evidentemente un invariante, ma anche esprimibile come il prodotto di due quadrivettori
r
r
(evidentemente invarianti): (4-vettore posizione e 4-vettore donda) I = r ( r , ct ) k ( k , c) .
r
Ricordiamo ora che, per la (A.2.1), k =
e consideriamo unonda luminosa che si propaga in un sistema k(V) sul
c
r
piano x, y e formante un angolo con x; le componenti di k ' saranno:
k '1 = k ' cos ' = ( ' c ) cos ' , k '2 = k ' sin ' = ( ' c) sin ' , k '3 = 0 e k '4 = ( ' c) = k ' .
raggio si propaga su x,y; quindi, si ha: k = ( cos , sin ,0, ) ; calcoliamo ora dunque e : a tal proposito,
c
c
c
'
'
dalla trasformazione di k4 si ha:
= ( + cos ' ) oppure:
c
c
c
,
k3 = k '3
(1 + cos ' )
= '
(1 2 )
cos =
'
(cos '+ )
(cos '+ ) =
(1 + cos ' )
(A.2.2)
'
'
cos = ( cos '+ ) e
c
c
c
(1 2 )
sin '
'
sin ' =
sin ' =
(1 + cos ' )
(1 + cos ' )
sin
e dalle (A.2.3) e (A.2.4) si ha ancora: sin ' =
(1 cos )
sin =
(A.2.4)
, che poi anche la (A.2.4) con e scambiati e con
cos ' =
(cos )
(1 cos )
(utile per determinare subito da ) ((A.2.3) con e scambiati e con (-) al posto di ),
(1 + cos ' ) =
= '
(1 2 )
1 cos
e la (A.2.2) diviene:
(1 2 )
1 cos
(A.2.5)
= , significa che la radiazione proviene da destra, dal sistema k in allontanamento lungo lasse x, e si pu dunque
cos = cos = 1 e dalla (A.2.5) con sorgente in
(1 )
allontanamento ( = ) si ha: = '
(A.2.6)
(1 + )
>>>
T = T'
= '
>>>
(1 + )
(1 )
(1 + )
(1 )
T = T'
(A.2.7)
(1 )
(1 + )
'
=
= m
'
'
= c ).
' (1 )
' (1 + )
, formula molto usata in astrofisica e cosmologia per il red shift (si ricorda poi che
da cui:
= 2
Per passare dal caso di emettitore in moto a quello di osservatore in moto e viceversa, basta poi scambiare con (V
con V) e con . In ogni caso, quando c avvicinamento (o allontanamento) le formule per lEffetto Doppler
Relativistico longitudinale sono le stesse indipendentemente da chi dei due si avvicina.
Se il sistema k si vede invece arrivare la radiazione con
= 2,
Relativistico TRASVERSALE; in tal caso non si ha allontanamento o avvicinamento, ma lunico effetto di tipo Doppler
imputabile alla sola dilatazione del tempo; infatti, anche dalla (A.2.5), con
= 2,
si ha:
= ' (1 2 )
' (1
2
)
2
longitudinale). Tale effetto fu osservato per la prima volta da Ives nel 1938 e conferm in pieno la teoria. Inoltre, la
diversit tra e conferma anche il fenomeno dellABERRAZIONE della luce, secondo cui se sei in moto vedi la luce
giungerti sotto un angolo diverso, un po come quando in viaggio in macchina vedi la pioggia cadere in obliquo sul
parabrezza. E dalle (A.2.3) e (A.2.4) si ha:
tg =
sin ' (1 2 )
(cos '+ )
v=(
r
dx1 dx2 dx3 dx4
dx
dx
dx
dx
,
,
,
) = ( 1 , 2 , 3 , 4 ) = (vx , v y , vz , c) = (v , c) = (u1 , u2 , u3 , u 4 )
d d d d
dt
dt
dt
dt
' alla v
' v 'x = (vx V ) , ' v ' y = v y
particella ha in 0, e
u '3 = u3 , u ' 4 = (u 4 u1 ) ;
=V/c), mentre si riferisce alla
velocit v che la
=
,
' (1 V v )
x
c2
( v x V ) , v' y = v y
che sostituita nelle prime tre: v' x =
'
'
(A.3.1)
e dallultima si ha:
V
= (1 + 2 v x ) .
caso delle trasformazioni inverse, in luogo della (A.3.1) si avr:
'
c
Segue dalla (A.3.1) che se la particella in quiete in 0 (v=0 >> = 1 ), allora ' = , da cui v=-V , cio in 0 la
,
v' z =
r r r
= (f , ( f v )) = ( F1 , F2 , F3 , F4 ) .
d
c
Per le T. di Lorentz: F '1 = ( F1 F4 ) , F '2 = F2
F=
dp
F '3 = F3
F '4 = ( F4 F1 )
Introducendo ora in tali equazioni di trasformazione le componenti della Forza di Minkowski, si ottiene:
r r
r r
r r
( f v )) , ' f ' y = f y , ' f ' z = f z , ' ( f 'v ' ) = ( ( f v ) Vf x ) , da cui:
c
r r
r r
r r
' f ' x = (f x
divengono:
f 'x =
r r
( f v ))
c
V
1 2 vx
c
( fx
f y 1 2
f 'y =
V
1 2 vx
c
fz 1 2
f 'z =
V
1 2 vx
c
r r
r r
( f v ) Vf x
( f 'v ' ) =
V
1 2 vx
c
a=
d2x
d 2 x1 d 2 x2 d 2 x3 d 2 x4
dv
(
,
,
,
)=
=
= (a1 , a2 , a3 , a 4 )
2
2
2
2
2
d
d
d
d
d
d
= 1,2,3 )
d
dv
v&
v (vv&)
dt
d
= v
+ 2 = 2 + 2 2 2 , in quanto:
a = (v )
dt
dt 1
c (1 )
d
dt
3
1
d d
3
& = vv& . Riguardo invece a4 :
& =
= (
)
=
dt dt (1 2 )
c2
a4 =
d
dt
d c d 2
(vv&)
(c)
= c
=
= c 4 & =
dt
d
dt 2 dt
c (1 2 ) 2
a = (
si ha:
e dunque:
d
c d 2
(vv&)
(v ),
) = ( 2 v& + 4 &v,
)
dt
2 dt
(1 2 ) 2 ; si noti che nel sistema in cui la particella a riposo (v=0, =0)
ordinaria. Si ha inoltre:
a = v& 2 > 0
ed essendo
dunque
di tipo spazio.
Per giungere ora alle equazioni di trasformazione dellaccelerazione, di consideri che:
dv
dv'
e v&'=
; inoltre, vx = vx (t ) e v' x = v 'x (t ' ) (coerentemente). Denominiamo poi:
dt
dt
v
v'
x = x e 'x = x ; otteniamo allora dalle (A1.18) che:
c
c
dv' x
dv '
1 ( 'y
'x )
1 ( 'z x ' x )
dv y
dv ' y
dvx
1
dvz
dv' z
= 2
,
=
e
=
2
2
dv' x (1 + ' x )
dv' y
(1 + ' x )
dv' z
(1 + 'x )2
v& =
Da queste si ha poi:
az =
dividendo ora tali relazioni con la seguente nota relazione (delle T. di Lorentz) dt = ( dt '+ dx' ) , si ha:
c
dvx =
ax =
dv ' x
2
(1 + ' x ) 2
1
a 'x
(1 + 'x )3
3
dv y =
ay =
dvz =
Pag.26
Pag.26
Pag.26
Pag.28
Pag.29
Pag.29
Pag.30
Pag.31
-App. 2-Capitolo 2: Lunificazione della forza elettromagnetica con quella gravitazionale (Rubino).
App. 2-Par. 2.1: Leffetto di MUniv sulle particelle.
App. 2-Par. 2.2: La scoperta dellessenza comune di gravit ed elettromagnetismo.
App. 2-Par. 2.3: Lentit oscillatoria dellUniverso tutto e delle particelle.
Pag.32
Pag.32
Pag.33
Pag.34
Pag.35
Pag.35
RUniv = N re
Pag.38
(!).
Pag.38
Pag.42
Pag.42
2 1030 kg / m 3 .
La cosmologia prevalente di oggigiorno, nel calcolo della densit media dellUniverso, giunge invece ad un valore pari a
(vedere anche la (A1.6)):
4
2
Wrong = H local
/( G ) 2 10 26 kg / m3
3
(A1.1)
Assumiamo ora per Hlocal (costante di Hubble locale vedi la (A1.7) pi sotto) il valore plausibile di:
m
H local 75km /( s Mpc) 2,338 1018 [( ) m]
s
(A1.2)
(A1.3)
confermato dalle innumerevoli misurazioni, ad esempio, sullammasso di galassie della Chioma (vedi la (A1.7) pi sotto)
e ci conferma dunque anche il fatto che gli oggetti pi lontani mai osservati si allontanano ad una velocit vicina a
quella della luce:
, da cui:
Inoltre, si calcola la velocit di un corpo gravitante di massa m ai confini dellUniverso visibile, banalmente, imponendo
la seguente eguaglianza tra forza centrifuga e forza gravitazionale:
ma = m
c2
RUniv Old
2
= G m M Univ Old / RUniv
Old
(A1.4)
(A1.5)
e quindi:
4 3
4
4
c 3
3
2
) ] = H local
/( G ) 2 10 26 kg / m3
Wrong = M Univ Old /( RUniv
Old ) = (c GH local ) [ (
3
3 H local
3
(A1.6)
2 1030 kg / m 3 .
Cerchiamo un attimo di capire quali scelte arbitrarie, nei decenni, abbiano potuto portare a tale discrepanza.
Dalle osservazioni di Hubble in poi, emerse che le galassie lontane e gli ammassi di galassie si allontanano da noi con
certe velocit, determinate da misure dello spostamento verso il rosso. Ma non solo; pi si osservano quelle lontane e
pi si rilevano velocit di allontanamento maggiori e pare giustamente che ci sia una legge che leghi la distanza di tali
oggetti da noi e la velocit con cui essi si allontanano, sempre da noi.
La Fig. A1.1 qui sotto una foto dellammasso di galassie della Chioma, sul quale sono disponibili centinaia di
misurazioni; bene, sappiamo che tale ammasso dista da noi:
x=100 Mpc = 3,26 108 a.l. = 3,09 1024 m
e si allontana da noi ad una velocit:
v=6870 km/s=6,87 106 m/s.
m
H local = v x 2, 22 1018 [( ) m] ,
s
cio un buon valore per la costante di Hubble locale, utilizzata ancor oggi dalla Cosmologia (prevalente).
(A1.7)
di Hubble locale se, invece dei dati sullammasso della Chioma, si utilizza lintero nostro Universo visibile, di 13,5 10 a.l.
di raggio ed espandentesi approssimativamente a velocit c.
Ma per gli stessi ragionamenti fatti finora per giungere alla definizione di Hlocal, possiamo anche dire che se le galassie,
con lallontanarsi, aumentano la loro velocit, allora sono sottoposte ad unaccelerazione aUniv , e, dalla fisica, sappiamo
che, banalmente:
x =
1
1
1
a t 2 = (a t ) t = v t
2
2
2
, da cui:
t =
aUniv , ci d:
aUniv =
v
v
( v ) 2
=
=
= aUniv 7,62 1012 m / s 2 ,
x
2
t
2 x
v
2 x
v
(A1.8)
E questa laccelerazione con cui perlomeno tutto il nostro Universo visibile accelera verso il centro di massa dellUniverso
intero.
VEDREMO ORA CHE QUESTO PICCOLO OGGETTO CHE ABBIAMO APPENA VALUTATO, E CIOE aUniv, CHE E UN
OGGETTO DI CUI, EVIDENTEMENTE, NON SI TIENE BEN CONTO, CI PERMETTE DI CONCLUDERE CHE LA DENSITA
CALCOLATA DELLUNIVERSO E ESATTAMENTE QUELLA MISURATA DAGLI ASTROFISICI E CI PERMETTERA ANCHE DI
GIUSTIFICARE LE ALTE VELOCITA DI ROTAZIONE DELLE GALASSIE, SEMPRE SENZA STARE A CERCARE LA MATERIA
OSCURA
9
pena per il dover accettare che viviamo in un Universo che ha un raggio almeno 100 volte quello dei 13,5 10 a.l.
predicato oggigiorno, e con una massa molto pi grande dell1,67 1053 kg, valutata a pag. 71, e sempre predicata
oggigiorno come massa dellUniverso tutto, e non di quello a noi visibile (vedere oltre).
Dipaniamo la matassa:
Partiamo dunque dalla scoperta rappresentata dalla (A1.8), secondo cui stiamo accelerando e dalla (A1.4), secondo cui:
aUniv =
c2
RUniv New
RUniv New
c2
=
1,17908 10 28 m .
aUniv
(A1.9)
Tale valore un centinaio di volte quello precedentemente calcolato nella (A1.3) e sarebbe per il raggio compreso tra il
centro di massa dellUniverso ed il luogo dove siamo ora noi, luogo in cui la velocit della luce vale c.
((non essendo evidentemente noi esattamente ai confini di tale Universo, si dimostra che lestensione totale pi grande
di un fattore 2 , cio RUniv-Tot=1,667 1028m.))
In ogni caso, si viaggia su dimensioni lineari dellordine di 100 volte quelle contemplate nella cosmologia prevalente. In
un certo senso, di materia che non vediamo ce n, ma sta oltre il range dei nostri telescopi, e non dentro le galassie o
tra le galassie, materia (quella oscura) che andrebbe a scombussolare le leggi della gravitazione, che invece reggono
bene.
Sempre dalla (A1.4) si ha ora che:
2
m aUniv = G m M Univ New / RUniv
New
, da cui:
2
55
M Univ New = aUniv RUniv
New / G = 1,59486 10 kg
(A1.10)
Questo valore, ancora una volta, 100 volte quello della cosmologia prevalente della (A1.5) ed la massa entro il raggio
RUniv-New , mentre quella entro il totale RUniv-Tot non nota.
Dalle (A1.9) ed (A1.10) scaturisce poi che:
c2 =
GM Univ
RUniv
(~Eddington).
(A1.11)
4
3
30
= M Univ New /( RUniv
kg / m3
New ) = 2.32273 10
3
!!!
(A1.12)
molto, ma molto prossima a quella osservata e misurata dagli astrofisici e gi riportata a pag. 70.
La natura, per fortuna, offre anche dei segnali che incoraggiano e, anzi, convincono, nel perseguimento di una
determinata strada, quando conferme di ci che si intuito giungono da altri settori della fisica del tutto distanti da
quello in cui ci si sta muovendo.
A tal proposito, premetto che il raggio classico dellelettrone (particella base e stabile, nel nostro Universo!) definito
eguagliando la sua energia E=mec2 a quella elettrostatica immaginata sulla sua superficie (in senso classico):
me c 2 =
re =
1 e2
4 0 re
, da cui:
e2
1
2,8179 1015 m
2
4 0 me c
(A1.13)
Adesso, sempre in senso classico, se immagino, ad esempio, di calcolare laccelerazione di gravit su un elettrone, come
se lo stesso fosse un piccolo pianetino, devo scrivere banalmente che:
mx ge = G
mx me
re2
, da cui:
3 4
me
2 2 Gme c
ge = G 2 = 8 0
= aUniv = 7,62 1012 m s 2 !!!
4
re
e
(A1.14)
cio esattamente il valore ottenuto nella (A1.8) per tuttaltra via, macroscopica, e non microscopica, come nel caso della
(A1.14). Del resto, i comportamenti gravitazionali dellUniverso e degli elettroni che lo compongono, perch dovrebbero
essere diversi tra loro?
App. 2-Par. 1.4: Ulteriori considerazioni sul significato di aUniv.
Beh, certo che se la materia mostra attrazione reciproca in forma di gravit, allora siamo in un Universo armonico
oscillante in fase di contrazione, che si sta contraendo tutto verso un punto comune che il centro di massa di tutto
lUniverso. Infatti, laccelerare verso il centro di massa ed il mostrare propriet attrattive gravitazionali sono due facce
della stessa medaglia. Inoltre, tutta la materia intorno a noi mostra di voler collassare: se ho una penna in mano e la
lascio, essa cade, dimostrandomi che vuole collassare; poi, la Luna vuole collassare nella Terra, la Terra vuole collassare
nel Sole, il Sole nel centro della Via Lattea, la Via Lattea nel centro del suo ammasso e cos via, e, dunque, anche tutto
lUniverso collassa. No?
Ma allora come si spiegherebbe che vediamo la materia lontana, intorno a noi, allontanarsi e non avvicinarsi? Beh, facile:
se tre paracadutisti si lanciano in successione da una certa quota, tutti e tre stanno cadendo verso il centro della Terra,
dove poi idealmente si incontreranno, ma il secondo paracadutista, cio quello che sta in mezzo, se guarda in avanti,
vede il primo che si allontana da lui, in quanto ha una velocit maggiore, poich si buttato prima, mentre se guarda
indietro verso il terzo, vede anche questi allontanarsi, in quanto il secondo, che sta facendo tali rilevamenti, si lanciato
prima del terzo, e dunque ha una velocit maggiore e si allontana dunque pure da lui. Allora, pur convergendo tutti, in
accelerazione, verso un punto comune, si vedono tutti allontanarsi reciprocamente. Hubble era un po come il secondo
paracadutista che fa qui i rilevamenti. Solo che non si accorse dellesistenza della accelerazione di gravit g (aUniv) come
background.
Ricordo poi che recenti misurazioni su supernove di tipo Ia in galassie lontane, utilizzate come candele standard, hanno
dimostrato che lUniverso sta effettivamente accelerando, fatto questo che contro la teoria della nostra presunta
attuale espansione post Big Bang, in quanto, dopo che leffetto di una esplosione cessato, le schegge proiettate si
propagano, s, in espansione, ma devono farlo ovviamente non accelerando.
235
238
TUniv =
= 2 / TUniv
, da cui:
2RUniv
= 2,47118 1020 s
c
(A1.15)
= H Global ).
App. 2-Par. 1.5: Ulteriori conferme ed incoraggiamenti da parte di altre branche della fisica.
1) Ricordiamo preliminarmente la legge di Stephan-Boltzmann:
= T 4 [W/m2],
dove
= 5,67 108 W (m 2 K 4 )
E ora interessantissimo notare che se si immagina che un elettrone (particella base e stabile, nel nostro Universo!)
irradi tutta lenergia che lo costituisce nel tempo TUniv , si ottiene una potenza che esattamente della costante di
Planck in watt!
Infatti:
mec 2 1
Le =
= hW = 3,316 10 34 W
TUniv 2
(Non deve stupire il coefficiente ; infatti, ai livelli fondamentali di energia, esso sempre compare, come, ad esempio,
sul primo orbitale dellatomo di idrogeno, dove la circonferenza dellorbitale dellelettrone (2r) proprio
1
1
DeBroglie dellelettrone. E lo stesso fotone rappresentabile come se racchiuso in un cubetto di lato photon ).
2
2
2) Inoltre, notiamo che un elettrone e lUniverso hanno lo stesso rapporto luminosit massa:
infatti,
LUniv
M Univ
LUniv =
M Univc 2
= 5,80 1051W
TUniv
M Univc 2
mec 2
1
hW
c2
Le TUniv
c2
TUniv
=
=
=
=
=
=2
M Univ
TUniv me
me
TUniv
me
che ad un elettrone si pu, per cos dire, attribuire la stessa temperatura della radiazione cosmica di fondo:
1
h 1
1
1
1
L
L
L
L
4
Univ
e
2
4
4
4
) =(
) =(
) =(
) 4 2,73K
= T , da cui: T = (
2
2
2
4R 2
4R 2
4RUniv
4re
4re
!!!
aUniv :
per tale principio, dal momento che il prodotto x p deve stare al disopra della quantit
delleguaglianza, quando x massimo, p deve essere minimo, e viceversa:
p x h / 2
Ora, come
pmax
pmax = (me c )
pmax xmin = h / 2
(h
= h / 2
h/ 2,
con il segno
consideriamo, per lelettrone (particella base e stabile, nel nostro Universo!), la quantit
min
e come
per lelettrone, dal momento che lo stesso altro non che unarmonica
dellUniverso che lo contiene (cos come un suono pu essere considerato come composto dalle sue armoniche), avremo
xmin = aUniv (2 )2 ,
come conseguenza diretta delle caratteristiche dellUniverso che lo contiene; infatti, per la
2
2
RUniv = aUniv Univ
, in quanto si sa dalla fisica che a = R , e poi Univ = 2 TUniv = 2 Univ
e dellelettrone (che armonica dellUniverso) si considera dunque la Univ esima parte di Univ , cio:
(A1.15),
, e come
oscillazioni a mo di quelle dellUniverso, ma con un rapporto velocit - ampiezza non pari alla Costante di Hubble
xmin
vero che:
, da cui:
2
RUniv = aUniv Univ
,
per
aUniv
34
= 0,527 10 34 [Js] e questa quantit ( 0,527 10 Js), guarda caso, proprio h / 2 !!
( 2 ) 2
4) Come fatto in precedenza, premetto che il raggio classico dellelettrone (particella base e stabile, nel nostro
Universo!) definito eguagliando la sua energia E=mec2 a quella elettrostatica immaginata sulla sua superficie (in senso
classico):
me c 2 =
re =
1 e2
4 0 re
, da cui:
e2
1
2,8179 1015 m
4 0 me c 2
Sempre in senso classico, se immagino di calcolare laccelerazione di gravit su un elettrone, come se lo stesso fosse un
piccolo pianetino, devo scrivere banalmente che:
mx g e = G
ge = G
m x me
re2
, da cui:
3 4
me
2 2 Gme c
=
8
1
137
1
Gme2
=
h Univ
137
re
1
TUniv
N 4,13 1042
(e/o i positroni
M Univ
1,75 1085 (~Eddington); la radice quadrata di tale numero :
me
(~Weyl).
assume
(vedi la (A1.15)) !!
6) Se suppongo, per semplicit, che lUniverso sia composto solo da armoniche come gli elettroni
Gme2
h
re
N re 1,18 10 28 m
RUniv
= N re 1,18 10 m ) !!!
28
App. 2-Par. 1.6: Sulle discrepanze tra la velocit di rotazione calcolata e quella osservata, nelle galassie.
mstar
v2
m M
= G star 2 Gal
RGal
RGal
, da cui:
v=
GM Gal
RGal
Nel caso invece si consideri anche il contributo mareale dovuto ad aUniv , e cio dovuto anche a tutto lUniverso
circostante, si ha:
v=
GM Gal
+ aUniv RGal
RGal
; vediamo dunque, nel caso, ad esempio, della M31, a quanti RGal (quante k volte) di
distanza dal centro della galassia il contributo di aUniv riesce a sopperire alla necessit di considerare dark matter:
GM + Dark
GM Gal
=
+ aUniv kRGal
kRGal
kRGal
, da cui:
k=
G (M + Dark M Gal )
4 , dunque a 4RGal lesistenza di aUniv
2
aUniv RGal
ci permette di avere i valori di velocit di rotazione osservati, senza far ricorso alla materia oscura. Inoltre, a 4RGal il
contributo alla rotazione dovuto ad aUniv domina.
Per ultimo, osservo che aUniv non ha invece effetto su oggetti piccoli come il sistema solare; infatti, in tale caso:
M Sun
RTerra Sole
E ovvio che queste considerazioni sul legame tra aUniv e la velocit di rotazione delle galassie sono ampiamente aperte
ad ulteriori speculazioni e la formula tramite la quale si pu tener conto delleffetto mareale di
aUniv
nelle galassie pu
assumere una forma ben pi complessa di quelle qui sopra, ma non sembra proprio un caso che un po tutte le galassie
hanno dimensioni che stanno in un range abbastanza stretto (3 4 RMilky Way o non molto di pi) e, in ogni caso, non con
raggi di decine o di centinaia di RMilky Way , ma, al massimo, di qualche unit. E infatti la componente dovuta
allaccelerazione cosmica che, annullando, in certe fasi, laccelerazione centripeta nella galassia, andrebbe a sfrangiare la
galassia stessa, ed eguaglia, ad esempio, nella M31, la componente gravitazionale propria ad un valore di raggio pari a:
GM M 31
= aUniv RGal Max
RGal Max
, da cui:
GM M 31
2,5RM 31 ,
aUniv
RGal Max =
re
della (A1.13):
1 e2
= mec 2
4 0 re
e dalla (A1.11):
c2 =
GM Univ
RUniv
(~Eddington),
segue che:
1 e 2 GM Univ me
=
4 0 re
RUniv
!!
(A2.1)
b) Alternativamente, sappiamo che la Costante di Struttura Fine vale 1 su 137 ed espressa dalla seguente equazione:
1 2
e
1
4 0
=
=
h
137
c
2
1
137
pu essere evidentemente ritenuta, a tutti gli effetti, altrettanto valida come espressione per la Costante di Struttura
Fine:
Gme2
E
1
r
=
= e = Box _ Min
137 h Univ EEmanable
1
TUniv
EBox _ Min
EEmanable
la minima energia
= ve _ in _ H
anche data dal rapporto tra la velocit dellelettrone nellatomo di idrogeno e la velocit della luce:
c = e 2 2 0 hc , oppure ancora come rapporto tra la lunghezza donda Compton dellelettrone (che la
minima di e- quando libero ed alla velocit massima c) e la lunghezza donda di e- appunto sul primo orbitale di H:
, con
di Bohr.
Potremo dunque stabilire la seguente uguaglianza e trarre le relative conseguenze (Rubino):
1 2
Gme2
e
1
4 0
r
)=
( =
= e
h
137
h Univ
c
2
, da cui:
Gme2
1 2
c Gme2
c Gme2
e =
=
= RUniv
re
4 0
2Univ re
H global re
Gme2
1 e2
=
re
4 0 RUniv
e positroni
M Univ
oppure ancora:
1
e2
GM Univ me
=
4 0 ( RUniv N )
N re
RUniv = N re
(A2.2)
re = RUniv
, allora la
(A2.2) diventa:
1 e 2 GM Univ me
=
4 0 re
RUniv
!!
RUniv = N re
M Univ
1,75 1085 (~Eddington), da cui:
me
proprio il valore di RUniv ottenuto nella (A1.9).
N=
N 4,13 1042
(~Weyl) e
M Univ
alla distanza
M Univ
RUniv
! (e viceversa)
TUniv
attraverso un lunghissimo cammino Univ , acquista una energia cinetica di origine gravitazionale tale che, se poi
chiamato a restituirla tutta insieme, in un attimo, tramite, ad esempio, un urto, e tramite dunque una oscillazione della
molla costituita appunto dalla coppia
e+e ,
miliardi di anni, che se fosse da attribuire solo alla energia potenziale gravitazionale della esigua massa dellelettrone
stesso, sarebbe insufficiente per parecchi ordini di grandezza.
Ecco, dunque, che leffetto di restituzione immediata, da parte di
che abbiamo visto essere
GM Univ me
RUniv
di liberare energie derivanti da forze molto pi intense della gravitazionale, oppure, come se fosse capace di una speciale
forza gravitazionale con una speciale Costante di Gravitazione Universale G ben pi grande di G:
mm
e e me me
1
)
= G ' e e
re
re
4 0 me me
parte dellelettrone, c leffetto rincorsa dovuto alla sua eterna caduta libera (gravitazionale) nellUniverso. E, di riflesso,
la gravit leffetto di composizione di tante piccole forze elettrostatiche.
Faccio altres notare che lenergia espressa dalla (A2.1), guarda caso, proprio pari a
me c 2
energia cinetica di rincorsa posseduta dalle coppie elettrone-positrone in caduta libera, e che Einstein confer anche alla
materia in quiete, senza purtroppo dirci che quella materia, appunto, non mai in quiete rispetto al centro di massa
dellUniverso, visto che siamo tutti inesorabilmente in caduta libera, anche se tra noi ci vediamo fermi, da cui la sua
essenza di energia cinetica di origine gravitazionale
1 e 2 GM Univ me
mec =
=
4 0 re
RUniv
2
mec 2 :
Fr =
1 e2
d 2
1 e2
p2
+
m
(
)
r
=
+
e
4 0 r 2
dt
4 0 r 2 me r 3
, dove
d
=
dt
p = me v r = merr = mer 2
U = Fr dr =
1 e2
p2
+
4 0 r
2me r 2
(A2.3)
U
U
p2
2me r 2
U Parab = k (r r0 )2 + U 0
r0
Uo
U 0 = (
1 2 me e 4
)
4 0 2 p 2
1 e2
4 0 r
Fr = U Parab r = 2k (r r0 )
che , guarda caso, una forza elastica a tutti gli effetti ( F = kx - Legge di Hooke).
U Parab = k (r r0 )2 + U 0
, e la corrispondente forza :
Inoltre, la legge gravitazionale cui lUniverso obbedisce, mostra una forza che varia con il quadrato della distanza,
proprio come quella elettrostatica, dunque anche la forza gravitazionale porta alla legge di Hooke per lUniverso.
--------------------------------------------Tramite la (A2.1) e la sua interpretazione abbiamo ricondotto la forza elettrica a quella gravitazionale; riconduciamo ora
la forza magnetica a quella elettrica, in modo tale da chiudere il cerchio ed effettuare lunificazione del campo
elettromagnetico con quello gravitazionale. E tutti questi campi, per ultimo, sono riconducibili allaccelerazione cosmica
aUniv , visto che la gravit lo .
Raggio catodico
e
F
e
e-
e-
Conduttore
e-
e-
e-
e-
e-
e-
e-
e-
e-
e-
p+
p+
p+
p+
p+
p+
p+
p+
p+
p+
Fig. A3.1: Conduttore non percorso da corrente, visto dal sistema di riferimento I (x, y, z) di quiete del raggio catodico.
Sappiamo dal magnetismo che il raggio catodico non sar deflesso verso il conduttore perch in questultimo non scorre
nessuna corrente che possa determinare ci. Questa linterpretazione del fenomeno in chiave magnetica; in chiave
elettrica, possiamo dire che ogni singolo elettrone del raggio respinto dagli elettroni del conduttore con una forza Fidentica a quella F+ con cui attratto dai nuclei positivi del conduttore.
Passiamo ora alla situazione in cui nel conduttore scorra invece una corrente con gli e- a velocit u:
Raggio catodico
e-
e-
e-
ep+
p+
e-
z
-
Conduttore
ep+
p+
F
e-
e-
p+
p+
p+
ep+
ep+
p+
Fig. A3.2: Conduttore percorso da corrente (con gli e- a velocit u), visto dal sistema di riferimento I (x, y, z) di quiete
del raggio catodico.
In questultimo caso, sappiamo dal magnetismo che il raggio di elettroni deve deflettere verso il conduttore, in quanto
siamo nel noto caso di correnti parallele e di verso concorde, che devono dunque attrarsi. Questa linterpretazione del
fenomeno in chiave magnetica; in chiave elettrica, possiamo dire che dal momento che gli elettroni nel conduttore
inseguono, per cos dire, quelli del fascio, i primi, visti dal sistema di quiete del fascio (I), avranno una velocit minore
rispetto a quella che risultano avere i nuclei positivi, che invece sono fermi nel conduttore. Risulter, perci, che gli spazi
immaginabili tra gli elettroni del conduttore subiranno una contrazione relativistica di Lorentz meno accentuata, rispetto
ai nuclei positivi, e dunque ne risulter una densit di carica negativa minore della densit di carica positiva, e dunque gli
elettroni del fascio verranno elettricamente attratti dal conduttore. Ecco la lettura in chiave elettrica del campo
magnetico. Ora, vero che la velocit della corrente elettrica in un conduttore molto bassa (centimetri al secondo)
rispetto alla relativistica velocit della luce c, ma anche vero che gli elettroni sono miliardi di miliardi , e dunque un
piccolo effetto di contrazione su cos tanti interspazi determina lapparire della forza magnetica.
Ora, per, vediamo se la matematica ci d quantitativamente ragione su quanto asserito, dimostrandoci che la forza
magnetica una forza elettrica anchessa, ma vista in chiave relativistica. Consideriamo allora una situazione semplificata
in cui un elettrone e- , di carica q, viaggi, con velocit v, parallelo ad una corrente di nuclei con carica Q+ (a velocit u):
y
r
Q+
Q+
z
-
F
Q+
Q+
Q+
Q+
d = d 0 1 u 2 c2
x
Fig. A3.3: Corrente di cariche positive (a velocit u) ed elettrone a velocit v nel sistema di quiete del lettore I.
a) Valutazione di F in chiave elettromagnetica, nel sistema I :
Ricordiamo innanzitutto che se ho N cariche Q, in linea, a distanza d una dallaltra (come in figura A3.3), allora la densit
di carica lineare sar:
= N Q N d = Q d
Ora, sempre con riferimento alla Fig. A3.3, nel sistema I, per lelettromagnetismo lelettrone sar sottoposto alla forza di
Lorentz
e:
Fmagn = 0
Dunque:
I
Q t
Q (d u )
uQ d
= 0
= 0
= 0
2r
2r
2r
2r
Fl = q (
(Biot e Savart).
1
1 Q d
Q d0 1
uQ d
)=q
( 0 uv )
v0
2r
2r 0
0 2r
1 u 2 c2
(A3.1)
dove il segno meno indica che la forza magnetica repulsiva, in tale caso, visti i segni reali delle due correnti, e dove la
distanza d0 di quiete risulta contratta a d, per Lorentz, nel sistema I in cui le cariche Q hanno velocit u
(d
= d0 1 u 2 c 2
).
F 'el = E 'q = (
1
1 Q d0
1 Q d'
1 '
)
) q = q(
)q = (
0 2r
0 2r
0 2r
1 u '2 c 2
(A3.2)
dove u la velocit della distribuzione di cariche Q nel sistema I, che si compone di u e v tramite il noto teorema
relativistico di addizione delle velocit:
u ' = (u v) (1 uv c 2 )
(A3.3)
d ' = d 0 1 u '2 c 2
Notiamo ora che, con un po di algebra, vale la seguente relazione (vedi la (A3.3)):
(1 u 2 c 2 )(1 v 2 c 2 )
1 u' c =
(1 uv c 2 ) 2
2
1 '
1 Q d'
1 Q d0
(1 uv c 2 )
F 'el = E 'q = (
)q = (
) q = q(
)
0 2r
0 2r
0 2r
1 u 2 c2 1 v 2 c2
(A3.4)
Vogliamo ora confrontare la (A3.1) con la (A3.4), ma ancora non possiamo, perch una fa riferimento ad I e laltra ad I;
rapportiamo allora
I:
F 'el
della (A3.4) in I anchessa e, per fare ci, osserviamo che, per la definizione stessa di forza, in
p I '
pI
F (in _ I )
=
= el 2 2
2
2
t I ' t I 1 v c
1 v c
, con
pI ' = pI
in quanto
lungo la direzione del moto relativo, dunque per le T. di Lorentz non subisce variazione, mentre
Si ha allora:
1 Q d0
(1 uv c 2 )
)
1 v 2 c2
2
2
2
2
0 2r
1 u c 1 v c
1 Q d 0 (1 uv c 2 )
)
= Fel (in _ I )
0 2r
1 u 2 c2
ovviamente s.
(A3.5)
Ora, dunque, possiamo confrontare la (A3.1) con la (A3.5), in quanto ora entrambe fanno riferimento al sistema I.
Riscriviamole una sopra laltra:
Fl (in _ I ) = q (
1 Q d
uQ d
Q d0 1
1
v0
)=q
( 0 uv)
0 2r
2r
2r 0
1 u 2 c2
Fel (in _ I ) = q (
1 Q d 0 (1 uv c 2 )
Q d0 1
uv
1
)
=q
(
)
2
0 2r
2r 0 0 c
1 u 2 c2
1 u2 c2
Possiamo dunque dire che le due equazioni sono identiche se verificata la seguente identit:
c =1
00
, e la
stessa nota sin dal 1856. Essendo dunque identiche le due equazioni, la forza magnetica risulta ricondotta ad una forza
elettrica di Coulomb, e dunque compiuta lunificazione dei campi elettrico e magnetico!!
---------------------------------------------
RUniv = N re
RUniv = N re
(!).
RUniv = N re ,
re
RUniv
Fig. A4.1: LUniverso rappresentato come un insieme di tante (N) molle oscillanti in direzione casuale, o come grossa
molla oscillante unica.
Ora, essendo le micro oscillazioni orientate a caso, la loro composizione random schematizzabile come in figura A4.2.
rN
RUniv
r
re
r
re
r
re
r
re
r
re
r
re
r
re
r
re
r
re
r
re
r
re
x
distribuite casualmente a formare loscillazione globale RUniv.
rN
r N 1 r
rN
RUniv
= RUniv
+ re ed il prodotto scalare di RUniv
con se stesso fornisce:
rN rN
r
N
N 1 2
N 1 r
RUniv RUniv = ( RUniv
) 2 = ( RUniv
) + 2 RUniv
re + re2 ; prendendo ora la media:
r N 1 r
N
N 1 2
N 1 2
(A4.1)
( RUniv
) 2 = ( RUniv
) + 2 RUniv
re + re2 = ( RUniv
) + re2 ,
r N 1 r
r
visto che 2 RUniv re = 0 , dal momento che re pu essere orientate in modo casuale su 360 (o su 4 sr, se vi va),
e dunque un vettore che media con esso, come nella espressione precedente, fornisce un valore nullo.
Riscriviamo allora la (A4.1):
N
N 1 2
( RUniv
) 2 = ( RUniv
) + re2
, e poi:
N 2 2
N 3 2
( RUniv
) = ( RUniv
) + re2
ecc, si ottiene:
N
N 1 2
N 2 2
( RUniv
) 2 = ( RUniv
) + re2 = ( RUniv
) + 2 re2 = .......... = 0 + N re2 = N re2
N
( RUniv
) 2 = N re2
N
( RUniv
) 2 = RUniv = N
RUniv = N re
!!!
, cio:
re2 = N re
, e cio:
(Rubino)
(A4.2)
E comunque noto, in fisica, che, ad esempio, il cammino R compiuto per N passi r successivi effettuati in direzione
casuale proprio la radice di N per r (vedi, ad esempio, gli studi sul moto Browniano).
--------------------------------------------App. 2-Capitolo 5: aUniv come responsabile assoluta di tutte le forze.
App. 2-Par. 5.1: Tutto da aUniv.
Sempre in linea con quanto detto finora, la stessa accelerazione cosmica aUniv responsabile della gravit tutta e dunque
anche di quella terrestre. Infatti, solo perch la Terra abbastanza densa, ha una accelerazione di gravit sulla sua
superficie pari a g=9,81 m/s2, mentre, se tuttoggi la si potesse considerare come composta di elettroni sparsi a caso, un
po come in Fig. A4.1 per lUniverso, allora la stessa avrebbe un raggio pari a
M Earth
re = N Earth re ,
me
g New = G
M Earth
= aUniv = 7,62 1012 m / s 2
2
( N Earth re )
!!!
Dunque, ancora una volta, possiamo dire che la forza di gravit una conseguenza del collasso dellUniverso con
accelerazione aUniv, e le accelerazioni di gravit che si incontrano, di volta in volta, per ogni oggetto celeste, sono diverse
da aUniv nella misura in cui tali oggetti sono particolarmente pi compressi.
--------------------------------------------App. 2-Par. 5.2: Schema riassuntivo dellunificazione delle forze.
aUniv
causa di
GRAVITA
causa di
ELETTRICITA
FORZA DEBOLE
(Rubino)
causa di (Einstein)
(Maxwell)
FORZA FORTE
MAGNETISMO
Fig. A5.1: Schema riassuntivo dellunificazione delle forze.
(Lavori in corso)
(through meson exchanges?)
App. 2-Par. 5.3: Altre considerazioni sulla composizione dellUniverso in coppie +/-.
Lo scaricarsi completo di ogni singola mollettina, che rappresenta la coppia elettrone-positrone, altro non che
lannichilazione, con trasformazione in fotoni delle due particelle. In tal modo, la coppia non sar pi rappresentata da
unonda piccata in un dato luogo ed in un dato momento (ad esempio
questultima, cio la
( x vt ) di
sin( x vt ) ( x vt ) ,
o la cugina di
Dirac), dove la parte piccata starebbe a testimoniare la carica della molla, ma sar
sin( x ct ) ,
avverr quando il collasso dellUniverso nel suo centro di massa sar completo.
Inoltre, lessenza delle coppie e+e-, o, in questera, delle e-p+, necessaria per la non violazione del Principio di
Conservazione dellEnergia. Infatti, lUniverso, che nella sua fase di contrazione massima verso una singolarit, pare
svanire nel nulla, o originarsi dal nulla, nel processo inverso a mo di Big Bang, rappresenterebbe una violazione di tale
principio di conservazione, se non fosse per il Principio di Indeterminazione, secondo cui una energia E comunque
legittimata a comparire, purch sia di durata inferiore a t, nella misura in cui
a patto che losservatore non abbia tempo sufficiente, in relazione ai suoi mezzi di misura, per determinarla, giungendo
quindi alla constatazione della violazione. E, di riflesso, tutto lUniverso, che di coppie +/- composto, gode di questa
propriet. E la comparsa di un E composto da una coppia di particelle, vede le stesse prima separarsi, e dunque avere
carica uguale, mentre lannichilirsi successivo dopo un t testimonia una attrazione successiva, e dunque lassunzione di
cariche opposte. Dunque, la comparsa e lannichilazione equivalgono alla espansione e contrazione dellUniverso. Se
dunque fossimo in un Universo in fase di espansione, la gravit non esisterebbe, anzi esisterebbe allincontrario, e non
dunque vero che solo la forza elettrica pu essere repulsiva, ma anche la gravit pu esserlo (con Universo in fase di
espansione); ora non lo , ma lo fu!
La considerazione filosofica pi immediata che si pu fare, in tale scenario, che, come dire, tutto pu nascere
(comparire), purch muoia, e sufficientemente in fretta; e cos la violazione evitata, o meglio, non
dimostrata/dimostrabile, ed il Principio di Conservazione dellEnergia preservato, e la contraddizione della comparsa di
energia dal nulla aggirata, anzi, di pi, contraddetta essa stessa.
Il protone, poi, gioca il ruolo del positrone, nei confronti dellelettrone ed pi pesante di questultimo per la possibilit
di esistere che il caso non ha potuto negargli, nellambito del Principio Antropico Cosmologico, portando, un siffatto
protone, allesistenza dellatomo e, dunque, delle cellule e della vita che si interroga su di esso. Al momento del collasso
dellUniverso, il protone irradier tutta la sua massa, divenendo positrone ed annichilendosi con lelettrone. E trova qui
risposta anche il quesito sul perch, nel nostro Universo, la materia ha prevalso sullantimateria: infatti questo non
vero; considerando il protone, ossia un futuro, nonch ex, positrone, come lantimateria dellelettrone, e viceversa,
lequilibrio perfetto.
App. 2-Par. 5.4: La Teoria della Relativit altro non che la interpretazione dellUniverso di oscillazioni
appena descritto, in contrazione a velocit c ed accelerazione auniv.
Sulla composizione delle velocit:
1) Caso di un corpo di massa m. Se in un mio sistema di riferimento I, in cui io osservatore sono in quiete, ho un corpo
di massa m in quiete, potr scrivere:
v1 = 0
E2 =
E1 =
1 2
mv2
2
1 2
mv1 = 0
2
. Se ora gli conferisco energia cinetica, esso passer alla velocit v2, tale che, ovviamente:
1 2
1
1
mv2 0 = m(v2 0)2 = m(v) 2 , con v = v2 v1 .
2
2
2
Ora, il fatto che ho ottenuto un v che semplicemente pari a v2 v1 un caso del tutto PARTICOLARE e vale solo
E = E2 E1 =
E = E2 E1 =
V v = (v22 v12 )
1 2 1 2 1
1
mv2 mv1 = m(v22 v12 ) = m(V v )2 ,
2
2
2
2
dove
un delta
; possiamo dunque affermare che, a parte il caso particolare in cui si parta da fermi (v1
= 0), se si gi in moto, non si avr un delta semplice, ma bens uno vettoriale; ma questa semplice fisica di base.
2) Caso della Terra. In un mio sistema di riferimento I, in cui io osservatore sono in quiete, la Terra (E-Earth) ruota
intorno al Sole con energia totale:
ETot =
E
1
M m
mE vE2 G Sun E
2
RE S
EK =
1
m E v E2
2
di energia cinetica per farla saltare dalla sua orbita a quella di Marte (M-Mars), allora, analogamente al caso
1
1
1
1
mE vE2 mE vM2 = mE (vE2 vM2 ) = mE (V v )2
2
2
2
2
delta di velocit sono di tipo vettoriale ( V ).
E =
, con
V v = (vE2 vM2 )
3) Caso dellUniverso. In un mio sistema di riferimento I, in cui io osservatore sono in quiete, se ad un corpo di massa
m0 che mi appare in quiete voglio fargli raggiungere la velocit V, devo conferirgli un delta v appunto, ma per quanto
esposto nelle pagine precedenti, essendo noi gi in movimento nellUniverso (ed a velocit c), come per i punti 1 e 2 qui
sopra, tale delta v deve sottostare alla seguente eguaglianza (vettoriale):
2
V = V v = (c 2 v New
Abs Univ Speed ) ,
dove
(A5.1)
la nuova velocit assoluta che il corpo di massa m0 risulta avere non rispetto a noi, ma nel
contesto dellUniverso e rispetto al suo centro di massa. Infatti, un corpo inesorabilmente legato allUniverso in cui si
trova, nel quale, guarda caso, esso, gi di suo si muove con velocit c e possiede dunque una energia intrinseca
m0 c 2 .
Nella fattispecie, dovendo io apportare energia cinetica Ek al corpo m0 per fargli acquisire velocit V (rispetto a me), e
considerando che, ad esempio, in una molla con una massa attaccata ad unestremit, per la legge del moto armonico
ho, per la velocit, una legge armonica del tipo:
E = E Max sin
ricavando
sin
( m0 c
= (m0c 2 + EK ) sin
m0c 2
m0c 2 + EK
2
2
V = V v = (c 2 vNew
Abs Univ Speed ) = [c (c
V = [c 2 (c
m0 c 2
) 2 ] = V , che riscrivo:
2
m0 c + EK
m0c 2
)2 ]
m0c 2 + EK
(A5.2)
EK = m0c 2 (
1
V2
1 2
c
1)
Aggiungendo ora a tale EK cinetica lenergia intrinseca (che ha anche a riposo riposo rispetto a noi, non rispetto al
centro di massa dellUniverso) del corpo m0, ottengo lenergia totale:
(della TRR).
1
2
V
1 2
c
1) =
1
2
V
1 2
c
m0c 2 = m0c 2
(A5.3)
Tutto ci dopo che abbiamo supposto di apportare energia cinetica ad un corpo in quiete (rispetto a noi). La (A5.3)
funziona benissimo, dunque, negli acceleratori di particelle, dove le particelle guadagnano energia, ma ci sono casi
(Universo collassante e Fisica Atomica) dove le masse perdono energia ed irraggiano, invece di guadagnarla, ed in tali
casi la (A5.3) completamente inapplicabile, in quanto la stessa vale per energie apportate, non rimosse.
App. 2-Par. 5.5: Sulla Relativit delle energie cedute.
In caso di energie rimosse (fase ulteriore del moto armonico), vale la seguente:
E=
1
m0 c 2
(Rubino)
(A5.4)
che intuitiva gi solo per il fatto che, con laumentare della velocit, il coefficiente
appunto, a favore della irradiazione, e cio della perdita, di energia, cosa purtroppo non prevista, nei termini della
(A5.4), nella Teoria della Relativit.
Per una (convincente) deduzione della stessa (A5.4) e di alcune sue implicazioni, per, sono da me disponibili ulteriori
trattazioni a riguardo.
Utilizzando la (A5.4) in Fisica Atomica per valutare le energie di ionizzazione
EZ
con numero atomico Z variabile, ci si riconduce, ad esempio, alla seguente equazione, che rispecchia egregiamente i dati
sperimentali:
Ze2 2
EZ = mec [1 1 (
) ]
2 0 hc
2
(A5.5)
EZ n = mec 2[1 1 (
Ze 2 2
) ]
4n 0 hc
(Whlin)
Orbitale (n)
Energia (J)
Orbitale (n)
1
2,1787 10-18
5
2
5,4467 10-19
6
3
2,4207 10-19
7
4
1,3616 10-19
8
Tab. A5.1: Livelli energetici nellatomo di idrogeno H (Z=1), come da (A5.6).
(A5.6)
Energia (J)
8,7147 10-20
6,0518 10-20
4,4462 10-20
3,4041 10-20
Lapplicazione della qui inappropriata (A5.3) non porta invece ai dati sperimentali, ma bens al ricorso di complesse
correzioni ed equazioni di correzione (Fock-Dirac ecc), che tenterebbero appunto di correggere una applicazione
appunto errata.
Anche per avere delle chiare dimostrazioni delle (A5.5) e (A5.6), sono da me disponibili ulteriori files e trattazioni.
--------------------------------------------App. 2-SUBAPPENDICI.
App. 2-Subppendice 1: Costanti fisiche.
1,38 1023 J / K
12
2
Accelerazione Cosmica aUniv: 7,62 10 m / s
11
Distanza Terra-Sole AU: 1, 496 10 m
24
Massa della Terra MTerra: 5,96 10 kg
6
Raggio della Terra RTerra: 6,371 10 m
19
Carica dellelettrone e: 1,6 10 C
Costante di Boltzmann k:
1,75 1085
15
Raggio classico dellelettrone re: 2,818 10 m
31
Massa dellelettrone me: 9,1 10 kg
3
Costante di Struttura Fine ( 1 137) : 7,30 10
21
Frequenza dellUniverso Univ : 4,05 10 Hz
Numero di elettroni equivalente dellUniverso N:
Pulsazione dellUniverso
TUniv :
9, 46 1015 m
16
Parsec pc: 3,26 _ a.l. = 3,08 10 m
30
3
Densit dellUniverso Univ: 2,32 10 kg / m
Temp. della Radiaz. Cosmica di Fondo T: 2,73K
6
Permeabilit magnetica del vuoto 0: 1, 26 10 H / m
12
Permittivit elettrica del vuoto 0: 8,85 10 F / m
34
Costante di Planck h: 6,625 10 J s
27
Massa del protone mp: 1,67 10 kg
30
Massa del Sole MSun: 1,989 10 kg
8
Raggio del Sole RSun: 6,96 10 m
8
Velocit della luce nel vuoto c: 2,99792458 10 m / s
8
2 4
Costante di Stephan-Boltzmann : 5,67 10 W / m K
28
Raggio dellUniverso (dal centro fino a noi) RUniv: 1,18 10 m
55
Massa dellUniverso (entro RUniv) MUniv: 1,59 10 kg
Anno luce a.l.:
---------------------------------------------------------------
Bibliografia:
1) (M.M. Lipschutz) GEOMETRIA DIFFERENZIALE, Schaum.
2) (Steven Weinberg) GRAVITATION AND COSMOLOGY(Principles and Applications of the General Theory of
Relativity), John Wiley & Sons.
3) (S. Greco e P. Valabrega) LEZIONI DI MATEMATICA, Vol. 2- Geometria Analitica e Differenziale, Levrotto & Bella.
4) (F.W.K. Firk) ESSENTIAL PHYSICS - Part 1-Relativity, Gravitation etc F. Yale University.
5) (L. Whlin) THE DEADBEAT UNIVERSE, 2nd Ed. Rev., Colutron Research.
6) (R. Feynman) LA FISICA DI FEYNMAN I-II e III Zanichelli.
7) (Lionel Lovitch-Sergio Rosati) FISICA GENERALE, Elettricit, Magnetismo, Elettromagnetismo
Relativit Ristretta, Ottica, Meccanica Quantistica , 3^ Edizione; Casa Editrice Ambrosiana-Milano.
8) (C. Mencuccini e S. Silvestrini) FISICA I Meccanica-Termodinamica, Liguori.
9) (C. Mencuccini e S. Silvestrini) FISICA II Elettromagnetismo-Ottica, Liguori.
10) (R. Sexl & H.K. Schmidt) SPAZIOTEMPO Vol. 1, Boringhieri.
11) (V.A. Ugarov) TEORIA DELLA RELATIVITA' RISTRETTA, Edizioni Mir.
12) (A. Liddle) AN INTRODUCTION TO MODERN COSMOLOGY, 2nd Ed., Wiley.
13) (A. S. Eddington) THE EXPANDING UNIVERSE, Cambridge Science Classics.
14) ENCYCLOPEDIA OF ASTRONOMY AND ASTROPHYSICS, Nature Publishing Group & Institute of Physics Publishing.
15) (Keplero) THE HARMONY OF THE WORLD.
16) (H. Bradt) ASTROPHYSICS PROCESSES, Cambridge University Press.
--------------------------------------------------------------
leonrubino@yahoo.it
for www.fisicamente.net
May 1993 Rev. 00
June 2011 Rev. 00
August 2011 Rev. 02
Contents:
-Contents.
-Introduction.
Page.1
Page.2
Page.4
Page.4
Page.7
Page.10
Page.17
Page.17
Page.18
Page.24
Page.25
Page.27
Page.29
Page.28
Page.30
Page.31
Page.33
Page.33
Page.34
Page.34
Page.36
Page.36
Page.38
Page.39
Page.41
-APPENDIXES.
Appendix 1: The Special Theory of Relativity.
Appendix 2: As I see the Universe (Unification Gravity Electromagnetism).
Page.44
Page.44
Page.69
-Bibliography.
Page.86
Introduction.
The General Theory of Relativit (GTR) is an extension of the Special Theory of Relativity
(or Restricted) (STR) shown in App. 1; it was necessary for Einstein to explain the
Gravitation. The word gravity reminds the word acceleration; in fact, we will see in Par.
2.1 that where there is an acceleration, rotation and gravity with a reference system, the
metric is not simple anymore as in STR.
Moreover, the GTR explains gravity as a curvature of the space, or better of the spacetime (mathematic space-time, in the opinion of the writer) caused by matter (and by the
energy!) which is in such space-time. Its like when, for instance, you put a ball of lead on
a mattress: around the sphere you have a funnel-like hollow and there, the mattress is
curved. Then, we can say that in such an area where the mattress is curved is the
gravitational field of the ball of lead. If now we throw a small ball over the mattress, and
neglecting frictions, it will move uniformly on a straight line, over the flat side of the
mattress until, as it approaches the curved hollow, it will fall towards the ball of lead.
Matter, in GTR, sees the space-time as a railway over which it can move; therefore, if this
railway is curved, the trajectories followed by the matter will be curved.
Then, if the ball of lead is so heavy that it completely sinks into the mattress, then the
funnel will become like a closed bag and we would call it a black hole, and from it nothing
would come out, not even light.
In the GTR the Equivalence Principle holds, according to which a gravitational field can be
cancelled by an acceleration and so it is not possibile to absolutely tell an acceleration
from a gravitational field. In fact, let us consider the Einstein Elevator, in which a guy,
standing stopped at a floor, rests with his weight on the floor of the elevator; if now we
cut the cable holding the elevator, it will start a free falling in the terrestrial gravitational
field and the guy inside will float as if in a space ship where there is no gravity, as he is
falling with the elevator and with its floor and this floor will always fall under his feet.
Therefore, an acceleration, that of the free falling, has cancelled the gravitational effect;
and, at the same time, when the elevator is stopped, the guy inside it, instead of thinking
that he was standing in a gravitational field (as he is resting on the floor of the elevator)
could have thought that there werent any gravitational fields, but that the elevator was
accelerating upwards, so pushing the soles of his shoes.
Through the example of the mattress we have just introduced the concept of the
(mathematical) space-time curvature, caused by the matter/energy. The tensor equation,
which will be here proved, and which shows the correspondence between the
matter/energy and the curvature indeed, is the Einstein Gravitational Field tensor
Equation:
1
R g R = 8GT
2
Its left side, all in R, shows the curvature radius and the geometric characteristics of the
space in which the matter/energy is, and the measure of such a matter/energy is, on the
contrary, given by the right side, through the momentum-energy tensor T , that, as we
will see, in some of its components, is proportional to the density etc.
Perhaps, only in the opinion of the writer (as the thought which follows, as well as many
others, hasnt been ever read on any books by me) the Newton classic gravitational
4 0 re
Is exactly the gravitational energy given to an electron by all the mass of the Universe
M Univ at a distance RUniv , that is:
GM Univ me
RUniv
Therefore, we have:
1 e 2 GM Univ me
!!
=
RUniv
4 0 re
And it really doesnt seem to be just by chance the fact that if we see the Universe as if
made just by electrons and positrons (fundamental harmonics, whose mass is me ), and
whose number is N, we easily have:
M
N = Univ 1,75 1085
me
and nothing is strange, so far, but we realize that if we multiply the square root of N
( N 4,13 1042 ) by the classic radius of the electron re , we get exactly
N re RUniv 1,18 1028 m , that is, the radius of the Universe! And an explanation of all this,
in a perfect harmony with the equivalence of electricity and gravity just shown, has been
put in App. 2/at Par.4.1.
Therefore, the attraction (/repulsion) particle-antiparticle, that is, the fast oscillations of
the particle-antiparticle pairs, in composing together, generate the slow oscillation of the
Universe (Big Bang, expansion, contraction, Big Crunch). Now, we are in the era of the
contraction, that is, the matter is contracting all towards the centre of mass of the
Universe, and thats why we see the actractive force of gravity every day, but hundreds of
billion of years ago, when the Universe was expanding, the gravity was (as a
consequence) repulsive-like (see still App. 2, as a support of all this), from which the
similarity between the electricity (attractive and repulsive) and the gravity (also attractive
and repulsive); unfortunately, when the Earth was born, the gravity already stopped to
be repulsive a very long time before!
Chapter 1: Preamble on Geometry.
Par. 1.1: Formalism, lengths of arcs and areas of curved surfaces.
r
where, of course, is the vector which describes (by moving) all the surface of the
sphere. We see that the components are a function of two parameters ( e ).
Of course, in the simpler case of a circle , we would have:
r
= (r cos ) x + (r sin ) y
(1.3)
and here we see that the components are a function of just one parameter ( ), if
r=const.
y
P(r, )
r
y
r
A (u )
r
B (u )
r
d
l
=
l ( A B )
l ( A B)
(u ) =
'
l ( A B)
(u ) du =
l ( A B)
[(
d 1 (u ) 2 d 2 (u ) 2
) +(
) ])du = (1 + f '2 ( x ))du
du
du
l ( A B )
(1.7)
r
and we also see from the vectorial composition in Fig. 1.3, that d (u ) is tangent to , as
it meets it just in one point, and therefore the vector
r
r d (u )
t =
du
is tangent to .
(1.8)
r
d
dv
r
r
d d
dv
(normal versor)
(1.10)
n = du
r
r
d d
du
dv
For what the area of a surface (in general) is concerned, we know from the elementary
geometry that the area of a trapezium is given by the product of both sides by the sine of
the angle formed by them, and if we also remind the definition of vectorial product above
r
d
reported, we can then say that the small area d delimited by the two small vectors
du
r
d
and
(Fig. 1.4) is:
dv
r
r
d d
, from which, by integration over all u and v:
d =
du
dv
r
r
d d
dudv
(1.11)
= d =
du
dv
u v
Par. 1.2: Base differential Geometry.
b(u )
t(u )
P (u )
(u )
n (u )
r
r
d (u ) r
We saw with (1.8) that the vector t (u ) =
= ' (u ) is tangent to the curve (u ) . As
du
we want a versor t (unitary modulus), well have:
r
' (u )
t (u ) = r
(tangent versor)
(1.12)
' (u )
So, still with (1.8) we saw that the derivation operation yields a normal vector.
Now, we derive the (1.12), so getting the normal versor n (u ) :
d
n (u ) =
t (u ) (normal versor)
(1.13)
du
At last, we define the binormal versor b(u ) , of course in the following way, by using the
vectorial product:
b(u ) = t(u ) n(u ) (binormal versor)
(1.14)
r
' (u )
t(u ) = r
' (u )
d
t (u )
(fundamental trihedron with generic parameter u)
du
b(u ) = t(u ) n(u )
n (u ) =
(1.15)
r
ds =
s ( A B )
r
d (u) =
s ( A B )
u r
r
'
(
u
)
du
=
' (u ) du
u0
s ( A B )
(1.16)
ds r
= ' (u ) .
du
If now, in the trihedron (1.15), we make a change of parameter (u >>> s, with s as an
intrinsic parameter),rwell have:
d (u ) du r
r
r
1
' ( s ) = ' [u ( s )] =
= ' (u )
, from which:
du ds
s ' (u )
r
' (u )
r
' (s ) =
= 1 . Then:
s ' (u )
from which: s ' (u ) =
r
r
r
du
du r
du
' ' (u ) s ' (u ) ' (u ) s ' ' (u )
' ' (u ) ' (u ) s ' ' (u )
r
ds
ds =
ds
' ' ( s ) =
2
2
(s ' (u ))
(s ' (u ))
and so we get the fundamental trihedron in the intrinsic parameterization:
r
t( s ) = ' ( s )
r
' ' (s )
n ( s ) = r
' ' (s )
(1.17)
r
r
' ( s ) ' ' ( s )
b( s ) = t( s ) n ( s ) =
r
' ' (s )
b( s )
t( s )
P (s )
(s )
n ( s )
(1.18)
(z=0)
s
s
x = r cos = r cos( ) , y = r sin = r sin( ) , z=0 (where s = r is the arc on the circle),
r
r
r
s
s
therefore: ( s ) = ( x, y, z ) = (r cos( ), r sin( ),0) from which:
r
r
r
d ( s )
r
s
s
' ( s ) =
= ( x ' , y ' , z ' ) = ( sin( ), cos( ),0) and so:
ds
r
r
r
d ' ( s )
r
1
s 1
s
' ' ( s ) =
= ( x' ' , y ' ' , z ' ' ) = ( cos( ), sin( ),0) , from which, again:
ds
r
r r
r
r
1
' ' ( s ) = x ' '2 + y ' '2 + z ' '2 = (curvature)!!
r
the torsion:
b' ( s ) is // to n ( s ) ; in fact:
r
d
d
d
d
d
d
b(s ) = (t(s ) n ( s )) = t( s ) n (s ) + t(s ) n (s ) = ' ' ( s ) n (s ) + t( s ) n( s ) = t(s ) n (s )
ds
ds
ds
ds
ds
ds
d
n ( s ) does not represent
ds
a variation of the modulus of n ( s ) , that is, along its extension as a vector, but, as a
d
consequence, it is just a normal to n ( s ) variation, so we can say that:
n ( s ) n ( s ) , and
ds
as we are talking about an orthogonal trihedron, we also have that (of course)
d
[t( s) n ( s)] // n ( s ) and so it shows to be proportional to n ( s ) :
ds
1
b' ( s ) =
n ( s ) ;
(1.19)
( s)
1
r
is the TORSION of in (s ) .
( s)
Now, there is a link between curvature and torsion and its expressed by the following:
Frnet formulas:
from the first two of (1.17) and from (1.18) we have the following: t' ( s ) =
1
n (s ) . Then,
( s)
1
1
d
d
n ( s ) t( s ) + b( s )
n (s ) =
n (s ) = (b( s ) t( s )) = b' ( s ) t( s ) + b( s ) t' ( s ) =
ds
ds
( s)
( s)
1
1
b( s )
t ( s)
=
(s)
(s)
from which we have the Frnet formulas:
1
t' ( s ) =
n (s )
( s)
1
b' (s ) =
n (s )
( s)
1
1
n ' (s ) =
b( s )
t ( s)
( s)
( s)
(Frnet formulas)
(1.20)
Curio: a body moving along a curve can have a tangential acceleration at and a centrifugal
one ac , of course, and from physics we know its v2 /r. Now, lets see if all the equations
and all the formalism presented so far show this. We have:
r
r
d ( s ) d ( s ) ds ds
=
= t( s )
dt
ds dt dt
r
d 2 ( s ) d 2 s
r r r
ds 2 dt(s ) d 2 s
ds 2 1
v2
= 2 t (s) + ( )
= 2 t ( s) + ( )
n( s ) = a = at + ac = at t ( s ) + n ( s ) .
dt 2
dt
dt
ds
dt
dt ( s )
(1.21)
here, we still see the two parameters u and v, typical for surfaces, but as we pointed out
their common dependance from one single parameter t, then (1.21) is also the expression
for a curve (on which the arc is). About the length s between a and b, we then have, of
course:
r
r r
b d
b d
b r du
d
r dv r du r dv 1 / 2
s=
dt = ( )1 / 2 dt = [( u
+ v )( u
+ v )] dt =
a dt
a dt
a
dt
dt
dt
dt
dt
b
du
du dv
dv
= [ E ( )2 + 2 F
+ G ( )2 ]1 / 2 dt
(1.22)
a
dt
dt dt
dt
area A of the surface:
by the (1.11), we saw that A = dA =
A
r
d v dudv
u v
r r2 r2 r2 r r2
Now, as the following vectorial identity holds: a b = a b a b , then we have:
r
r 2
d u d v = EG F 2 and so:
A = dA =
A
u v
r
d v dudv =
EG F 2 dudv
(1.23)
uv
r
= (r cos cos ) x + (r sin cos ) y (r sin ) z
r r
r r
r r
E = = r 2 sin 2 , F = = 0 , G = = r 2 and for the (1.23), we get:
A = dA =
A
=r
d sin
EG F 2 dd =
r 4 sin 2 0dd =
sin dd =
d = r 2 cos 0 = r 2 2 = 4r
2
r
r
r N
r
r
N
dN =
du +
dv = N u du + N v dv
u
v
Now we can define the second fundamental form II:
(1.25)
r
r
r r
r
r
r r
r r r r
r r
II = d dN = ( u du + v dv)( N u du + N v dv) = u N u du 2 ( u N v + v N u )dudv v N v dv 2 =
= Ldu 2 + 2Mdudv + Ndv 2
properties of II:
r
r r
r r
r r r r
as we have: ( u , v ) N , then 0 = ( u N )u = uu N + u N u ,
r r
r r r r
r r
r r r r
r r
r r r r
0 = ( u N )v = uv N + u N v , 0 = ( v N )u = vu N + v N u , 0 = ( v N )v = vv N + v N v ,
r r
r r r r
r r
r r
r r
r r
r r
therefore: uu N = u N u , vv N = v N v , uv N = u N v , vu N = v N u and so:
r r
r r
r r
L = uu N , M = uv N , N = vv N from which:
r r
r r
r r
r r
II = Ldu 2 + 2Mdudv + Ndv 2 = uu Ndu 2 + 2 uv Ndudv + vv Ndv 2 = d 2 N
normal curvature:
if we have a surface S which contains a curve C and if P is a point on C, the (1.20-1)
supplies the vector curvature, while we define the curvature t'n ( s ) normal to C in P the
r
r
projection of the curvature vector t' ( s ) on the normal N (and N is the versor n ( s ) of
(1.10)):
r r
r
r
t'n (s ) = (t' ( s ) N ) N and the component along N is: tn = t' ( s ) N .
r
Now, as t( s ) N , we have:
r
r
r
d
d r
d r
(t ( s ) N ) = 0 = t' ( s ) N + t( s ) N , from which: t' ( s ) N = t( s ) N and so:
ds
ds
ds
r
r
r
r
r
r
d (s ) dN
d dN II
r
d r
tn = t' (s ) N = t(s ) N =
= 2 = , as the numerator d dN is really
ds
ds ds
ds
I
the definition of II, while ds 2 can be figured out by deriving (1.22) and then squaring, and
well really have I.
example: normal curvature of the sphere:
we already saw with (1.2) that the sphere (Fig. 1.1) is represented by the following
equation:
r
= (r cos sin ) x + (r sin sin ) y + (r cos ) z , from which:
r
= (r sin sin ) x + (r cos sin ) y
r
= (r cos cos ) x + (r sin cos ) y (r sin ) z
r
= (r cos sin ) x (r sin sin ) y
r
= (r sin cos ) x + (r cos cos ) y
r
= (r cos sin ) x (r sin sin ) y (r cos ) z
r
N = (r cos sin ) x (r sin sin ) y (r cos ) z
r
r r
r r
r r
r r
r
E = = r 2 sin 2 , F = = 0 , G = = r 2 , L = N = r sin 2 , M = N = 0
r
r
N = N = r , from which:
tn =
Ld 2 + 2 Mdd + Nd 2 1
= !!!
Ed 2 + 2 Fdd + Gd 2 r
dtn
du
= 0 and
( du 0 , dv 0 )
I II dv II I dv
I2
II du
II
I du
I
dtn
dv
= 0 , that is:
( du 0 , dv 0 )
I II du II I du
I2
= 0 and:
( du0 , dv0 )
= 0 , and: II dv
( du0 , dv0 )
II
I dv
I
= 0 but:
( du0 , dv0 )
II
(du0 , dv0 ) = t0 , so:
I
II du t0 I du
( du0 , dv0 )
= 0 and II dv t0 I dv
( du0 , dv0 )
= 0 . Now, as:
( L tE )du + ( M tF )dv = 0
(M tF )du + ( N tG )dv = 0
a base to
r
r
uu = 111 u
r
r
uv = 121 u
r
1 r
vv = 22
u
r
1r
N u = 1 u
r
r
N v = 21 u
(1.28)
(1.29)
(1.30)
and lets not forget that by (1.30) we have just started to use the EINSTEIN
CONVENTION, according to which if in a term an index is repeated, then on it we have to
r
sum up. In fact, in the term ij in (1.30), is repeated and so this term will yield two
values, as well as happens in the Gauss equations (1.29).
THE METRIC TENSOR g ij :
lets review our terminology used so far, using more compendious forms:
r
r
2
r
r
1
2
u = u , v = u , u = (u , v) , i = i , ij = i j ;
u
u u
r r r r
r r
r r
I = d d = 1 1du1du1 + 2 1 2du1du 2 + 2 2 du 2 du 2 = g11du1du1 + g12 du1du 2 + g 21du 2 du1 +
+ g 22 du 2du 2 = gik du i du k = gik du i du k , with: g11 = E , g12 = g 21 = F , g 22 = G and:
i, k
g12
= g11 g 22 g 21 g 22 = EG F 2 = g
g 22
g
g = det 11
g 21
(1.31)
r r
r
Moreover: dN = N1du1 + N 2 du 2 and:
r r
r r
r r
r r
r r
II = d dN = 1 N1du1du1 1 N 2du1du 2 2 N1du 2 du1 2 N 2 du 2 du 2 =
= b11du1du1 + b12 du1du 2 + b21du 2 du1 + b22 du 2 du 2 = bik du i du k
i ,k
b b
with: b11 = L , b12 = b21 = M , b22 = N and: b = det 11 12 = b11b22 b21b22 = LN M 2 = b .
b21 b22
r
By scalarly multiplying Gauss equations by k , we have:
r r
r r
r r
r r
r r
ij k = ij k + bij N k = ij k + 0 = ij k = ij gk = ijk ( , i, j = 1,2 )
ijk are the 1st kind Christoffel symbols.
Then, remember that: g i g j = i j (by definition of g j ), with i j which is the Kroneckers
Delta, and is 0 if i j and 1 if i = j ; in fact:
r r r r
r r r r
r r
r
r
gi g j = i j = i j = i j 1 = i j , as i and j are, by definition,
r
normal, if i j (definition of j ).
From this, we have: ij g k = ij g g k = ij k = ijk and so: ijk = g k ij and
ijk = g k ij .
We have:
g ij
= ikj + jki
u k
(1.32)
(1.33)
proof:
r r
we have, by definition of g ij , that: g ij = i j , from which:
g ij r r r r
= ik j + i jk = ikj + jki
u k
-----------------g
1 g
g
Then, we also have: ikj = ( iki + kij ijk )
2 u
u
u
(1.34)
proof:
g ij
g ik
g ki
= ikj + jki ,
=
,
=
and
jik
kij
kji
ijk
u k
u i
u j
(its still about (1.33), but with indexes every time different, but, all in all, indexes have
values 1 and 2, whatever their name is), from which we have what we wanted to prove.
------------------
It follows that:
g
g
1
g
ijk = g k ( ji + ji ij )
(1.35)
2
u
u
u
and moreover, by multiplying (1.32) ijk = g k ij in both sides by g (the reciprocal of
g k ) , where, by definition of reciprocal: g g k = k , we have: g ijk = g g k ij = k ij ,
that is, by removing k and provided that = k , in the left side, we have:
ij = g ij and by using the last equation, the (1.33)
g ij
= ikj + jki = g j ik + g i k
k
u
g ij
= ikj + jki becomes:
u k
(1.36)
-----------------r
r
r
By scalarly multiplying by j , the Weingarten equations (1.29) N i = i , we get:
r r
r r
bij = N i j = i j = i gj ; if now we put: bi j = bi g j , we have:
r
r
bi j = bi g j = i g g j = i j = i j ; therefore N i = bi , with:
bi j = g j bi e bij = gj bi
the symbols (tensors) of Riemann (1st and 2nd kind):
Rmijk = bik b jm bij bkm (2nd kind, rank 4 tensor)
(1.37)
(1.38)
(1.39)
two indexes or the last two are the same; therefore, just four components are not zero,
and are:
R1212 = R2121 = b22b11 b12b21 = LN M 2 = b and R1221 = R2112 = b12 b21 b22b11 = ( LN M 2 ) = b
We notice that:
LN M 2 b R1212
= =
= K (Gauss ) .
EG F 2 g
g
------------------
(1.40)
(1.41)
proof:
r
r
r
ij = ij + bij N >>>
r
r
r
r
ij r
r
r
r
r
= ijk = (ij ) k + ij k + (bij )k N + bij N k = (ij ) k + ij (k + bk N ) +
k
u
r
r
r
r
+ (bij ) k N + bij (bk ) = [(ij ) k + ij k bij bk ] + [ij bk + (bij )k ]N
r
r
where we used the Weingarten equation N i = bi .
r
r
r
Similarly: ikj = [(ik ) j + ik j bik bj ] + [ik bj + (bik ) j ]N
Now, the third order derivatives are not depending on the order of derivation if and only
if:
r
r
ijk = ikj , that is:
r
r
r
r
ijk ikj = [(ij ) k (ik ) j + ij k ik j bij bk + bik bj ] + [ij bk + (bij ) k ik bj (bik ) j ]N = 0
r
r
r
and as 1 , 2 and N are linearly independent, the last equation means that:
[(ij )k (ik ) j + ij k ik j bij bk + bik bj ] = 0
(1.42)
[ij bk + (bij )k ik bj (bik ) j ] = 0
The (1.42), through the (1.39), yields: Rijk = (ik ) j (ij )k + ik j ij k , that is what we
wanted to show.
Chapter 2: The main quantities in the Theory of General Relativity.
Par. 2.1: Introductory concepts on General Relativity.
{
{
1
x = x'+ at 2
2
y = y'
z = z'
t = t'
dx = dx'+ at ' dt '
dy = dy '
dz = dz '
dt = dt '
and:
from which:
or
(2.2)
d 2 = (c 2 a 2t '2 )dt '2 2at ' dx ' dt ' dx '2 dy '2 dz '2
(2.3)
If, then, we also have another system I whose plane x-y is rotating (with angular velocity
) with respect to that of the former system, as we then have the following
transformation system:
= t
Fig. 2.1: Two reference systems, one rotating with respect to the other.
and remembering that, easily, for instance, d (sin t ) = cos t dt etc, we have for d 2 :
d 2 = [c 2 2 ( x'2 + y '2 )]dt 2 + 2y ' dx' dt '2x ' dy ' dt ' dx '2 dy '2 dz '2
(2.4)
and we can see that in no cases ((2.2), (2.3), and (2.4), which are of the kind
d 2 = g dx dx ; see after) we can reduce d 2 , by means of time transformations, to the
algebraic summation of the squares of the differentials of the four coordinates, as in (2.1)
and as would be, on the contrary, for another inertial reference system.
Therefore, the presence of linear accelerations of reference systems (that can cancel
gravitational fields) and also centrifugal/centripetal ones, that is, central ones, such as for
the gravity (for instance, after rotations), introduce combined terms which change the
metric, and so the geometry of the space-time. From this comes the need to formulate a
relativistic theory for gravitation (GTR).
Par. 2.2: On the metric tensor and other main quantities.
r
When we have dealt with the Gauss-Weingarten equations, just before, we saw that u ,
r
r
v , and N are linearly independent (orthogonal) and so they really are a reference
system, but curvilinear, and local, as they lie on a point of a surface, and when we move
on it, such a tern moves and they also change their direction. Thats a valid example of a
curvilinear reference system, in the opinion of the writer, of course.
In all the equations introduced in the last chapter on geometry, indexes i, j, k etc changed
from 1 to 2 or also 3. Now, getting a bit deeper in the Universe, and so in the General
Relativity, we first of all notice that our Universe looks tridimensional, therefore, on
indexes, well have a variability which reaches at least three, and then, as also shown in
App. 1 on Special Relativity, there exists a mathematically four-dimensional Universe (for
the standard physics its also really four-dimensional; to me, its not!), in which there is
covariance, and so conservation, when passing from an inertial system to another, then,
with Einstein, we start once and for all to consider the Universe on a four-dimensional
basis and thats it; therefore, the indexes of all the geometrical equations introduced in
the last chapter, will have, from now on, all indexes with a variability on four values and
the fourth value is the time one (ct). Then, the Einsteins convention will hold, according
to which if in a term of an equation an index is present twice, then the summation over it
is understood.
We report here the mains, which will be needed by us:
r
r
ij = ij
(2.5)
1 k g j gi gij
g ( i +
(2.6)
(2.7)
(2.8)
The metric tensor g ik , in case we are dealing with Euclidean spaces, reduces to
Minkowskis tensor ik (its 1 for i=k=1,2,3 and its -1 for i=k=4; its 0 when i is different
from k) and without combined terms, that is, if i,k are not the same, then ik=0; in fact,
we should then have ( u i = x, y, z , ct ):
d 2 = ik d i d k = x 2 y 2 z 2 + (ct )2 , just like in Special Relativity (App. 1) and the i
would represent the Euclidean coordinate system. Then, when passing to curvilinear
systems ( d i >>>> dx i ), well have:
d 2 = ik d i d k = ik
g = ik
i k
dx dx = g dx dx , with
x x
i k
x x
(2.9)
(2.10)
x2 + y 2 + z 2 = r 2
(x,y,z)
r
= (r cos sin ) x + (r sin sin ) y + (r cos ) z
( r , , )
Now, in case we make a change of coordinate system (x,y,z) >>>> (x,y,z) where the
latter is, for instance, shifted and rotated with respect to the former, there will be classic
equations to go from one system to another, but both system will still have the same
graphical representation by axes stretching from the origin to infinite, in positive as well as
in negative.
x ' 2 + y '2 + z '2 = r 2
(x,y,z)
but all this in the Euclidean geometry, or non curvilinear, if we like.
y
z
x
If now we suppose to go from a system as that in Fig. 2.2 to another in which the space
is, for any reason, curved, for instance by the gravity of matter and energy, as supposed
in the General Relativity, then the Euclidean geometry isnt enough anymore and the
curvilinear one, the non Euclidean Riemann-like is more helpful. In fact, in the opinion of
the writer, when passing from a standard system to a curvilinear one, you cannot have the
representation of Fig. 2.2, but the curvilinear one will look like a tern of straight Cartesian
axes only in the infinitesimal range (d = de), as per Fig. 2.3; in fact, as its curved, as
long as you get farther from the origin 0, every single axis bends and loses any linearity
and proportionality.
dy
dy
dx
dx
0
dz
dz
1 = 1 ( x1 , x 2 , x 3 , x 4 )
2 = 2 ( x1 , x 2 , x 3 , x 4 )
3 = 3 ( x1 , x 2 , x 3 , x 4 )
4 = 4 ( x1 , x 2 , x 3 , x 4 )
(2.11)
x1 = x1 ( 1, 2 , 3 , 4 )
x 2 = x 2 ( 1 , 2 , 3 , 4 )
x 3 = x 3 ( 1, 2 , 3 , 4 )
x 4 = x 4 ( 1 , 2 , 3 , 4 )
(2.12)
and for the conversion equations for the expressions for the surfaces and for geometrical
r
r
object ( ), we obviously have ( = 1i + 2 j + 3k + 4t = ( 1 , 2 , 3 , 4 ) and
r
r
r
r
r
( = x1 1 + x 2 2 + x 3 3 + x 4 4 = ( x1 , x 2 , x 3 , x 4 ) ):
r
r 1 2 3 4
1 = 1 = 1 i + 1 j + 1 k + 1 t
x
x
x
x
x
r
1
2
3
r
4
2 = 2 = 2 i + 2 j + 2 k + 2 t
x
x
x
x
x
r
1
2
3
r
4
(2.13)
3 = 3 = 3 i + 3 j + 3 k + 3 t
x
x
x
x
x
r
r
1
2
3
4
4 = 4 = 4 i + 4 j + 4 k + 4 t
x
x
x
x
x
{
{
2
d 2 = 1 dx1 + 2 dx 2 + 3 dx 3 + 4 dx 4
x
x
x
x
3
3
3
3
d 3 = 1 dx1 + 2 dx 2 + 3 dx 3 + 4 dx 4
x
x
x
x
4
4
4
4 4
4
1
2
3
d = 1 dx + 2 dx + 3 dx + 4 dx
x
x
x
x
d 1 =
(2.14)
r
and so: d = d 1i + d 2 j + d 3k + d 4t = (d 1, d 2 , d 3 , d 4 ) = (dx1 , dx 2 , dx 3 , dx 4 ) =
r
r
r
r
r
r
r
= d = dx1 1 + dx 2 2 + dx 3 3 + dx 4 4 = dx i i = d
(2.15)
r
1
2
3
4
and therefore ( dx , dx , dx , dx ) are the components of in the curvilinear base
r r r r
( 1 , 2 , 3 , 4 ).
r r r r
There exist a reciprocal set of four numbers ( 1 , 2 , 3 , 4 ) that, by definition:
r r
i j = i j .
Now, if we go back for a while to the (2.15), where we plainly used the Einsteins
r
r
convention, we have: d = dx i i
If now we want to make a change of curvilinear base, with coordinates from dx i to dx'l ,
r
r
r
we will obviously write: dx i i = dx'l 'l and, by multiplying both sides by i , well have:
r r
x i
dx i = dx'l 'l i , but its also true that (as well as for (2.14)): dx i = l dx'l ; therefore:
x '
i
r r
x
= 'l i , that is:
l
x '
r
r x i
'l = i l
(2.16)
x '
and (2.16) is the equation for the base change.
Law of transformation for the components of a 4-vector:
r
r
r
let V = V i i be a generic vector expressed by curvilinear coordinates in the base i ; in
r
r
r
another base 'l , we will have: V = V 'l 'l and, according to the (2.16):
r
r
r
x i r
V = V 'l 'l = V 'l l i = V i i , with:
x '
i
x
V i = V 'l l
(2.17)
x '
which is the transformation equation for the components of a 4-vector after a base
i
i
l x '
change. Very simply, its inverse is: V ' = V
x l
-----------------Law of transformation for the components of a 4-tensor:
in App. 1 on Special Relativity we said that we can get a tensor T with rank n when we
multiply the components of n vectors. So, if we have two vectors V and S: (where we are
simultaneously reminding how their components transformate)
x '
>>>>
x
x'
x '
x ' x '
x ' x '
T ' = V ' S ' = V S = V S
=
T
= T ' and this is how the
x
x
x x
x x
components of a rank 2 tensor transformate. Then, you can proceed similarly for higher
rank tensors.
V ' = V
x'
x
S ' = S
Derivation of a 4-vector:
r
r
we have a 4-vector: V = V ; lets derive it:
r
r
dV dV r
d
=
+
V
,
(2.18)
dx dx
dx
Indexes changes from one term to another, as they change on four values and must not
necessarily be simultaneously the same in all terms.
r r
Now, multiply the right side of (2.18) by the unitary (=1) quantity :
r
r
dV
dV
d r r
] ; well, the quantity between the brackets is the covariant
= [ +V
dx
dx
dx
derivative and is a tensor, for all that has been said so far:
r
dV
dV
d r
(2.19)
V; = + V
=
+ V (covariant derivative)
dx
dx
dx
where are said the Christoffels symbols (affine connection) and already introduced by
(1.30).
Moreover, for the system (2.13), we could write, in a more compendious vectorial form:
r
= ( ) , and, from this, we also have a dual form for the reciprocal set of four
x
r
r r
r
x
(so that, by definition of reciprocity: = ): = ( ) and so the coefficient
dx
dx
x
written in a simpler way, without the unitary coefficients :
2 x
=
(2.20)
x x
Then, already in App. 1 on Special Relativity, we reminded that such a derivative (of a
vector) gives a tensor. We also notice that such a derivative is a tensor (rank 2) just
because the terms which make it, have two indexes, just like a tensor 2.
Moreover, (1.30) in the last chapter on Geometry is an example of a derivative of a vector
(versor) which looks like a tensor 2, indeed.
derivation of a tensor:
k
T +
T +
T
Tk
(2.21)
x
r r
in fact ( T are just the components, without versors and, moreover = = 1 ):
r r r
T(tensor)= T , from which:
we have: T
; =
r r r
r r r
r r r r r
r r r r r
(T ) = ( T )( ) + T ( ) ( ) + T ( ) ( ) +
x
x
x
x
r
r
r
r
r
k
Tk ( ) k ( ) = T +
T +
T
Tk = T
; cvd.
x
x
r
r
r
r
r k
r r
r r k
r
(as: k = k = 0 = k +
, da cui:
k =
)
x
x
x
x
x
x
Lets go back to (2.9), and we know from App. 1 on Special Relativity that d 2 is Lorentz
invariant:
x' x'
d 2 = dx ' dx' =
dx dx = dx dx , with:
x x
x ' x'
(2.22)
=
x x
Lets differentiate (2.22) on x :
x ' 2 x'
2 x' x'
0 = +
; now, we sum to this the same, but with and
x x x
x x x
swapped and then we subtract the same equation, but with and swapped, so getting:
2 x' x '
2 x '
0 = 2 >>>>>
= 0 , whose solution is:
x x x
x x
x' = x + a
(Lorentz Transformation)
(2.23)
x' x'
This one, together with (2.22), yields: =
= .
x x
(2.24)
Lets figure out the elements of the Lorentz matrix (or of the Lorentz tensor) :
from the Lorentz Transformations (A1.8) in App. 1, we have that (// and refers to the
direction of the movement):
r r
r
r
r
r
r
V x
x '// = ( x// Vt ) , x ' = x , t ' = (t 2 ) ; moreover, of course, we have:
c
r
r
r r V
r
r r
x// = ( x V ) 2 e x = x x// , and so:
V
r
r
r r
r r V
x ' = x + ( 1)( x V ) 2 Vt and
(2.25)
V
r r
V x
t ' = (t 2 )
c
While, for (2.24), we have: dx'i = i dx , from which, using the common letters (i,j etc) for
the three spatial components, 0 as the fourth time coefficient and the Greek letters for all
of them:
dx'i = i j dx j + i0 dx 0
(for (2.24))
r r Vi
1
dx'i = dx i + ( 1)(dx V ) 2 + V i dx 0 (for (2.25))
V
c
(here, the last term has got a + and not a because dx 0 = cdt )
(2.26)
(2.27)
and
i j = ij +
( 1) i
V V j , and if we use the normalization c=1, out of
V2
i0 = +V i e i j = ij +
( 1) i
V Vj
V2
(Lorentz Tensor)
r r
where the product dx V in (2.27) yielded just the component dx jV j in (2.26), as in (2.26)
there was just dx j .
If the direct Lorentz T. is given by (2.24): dx' = dx , then, the inverse one will be
represented as follows: dx = ' dx' .
Therefore, as also seen in App. 1 on Special Relativity, not only the spatial components (x)
and temporal (ct) can be Lorentz transformed, but also 4-vectors and 4-tensors can:
V ' = V
T '
= T (remembering that the components of a tensor are obtained by
In practice, if you put it in the integral (which is a summation) it yields the same
integrated function f, but of a different variable. See some good books on the Fourier
Transform to have useful versions of the Delta of Dirac.
Preamble on currents and densities (of matter/energy):
r
if in various points xn (t ) we have energy (and so also matter) with a volume density
en [ J / m3 ] , in order to have the total one, we obviously have to sum on n:
r
r r
( x , t ) = en 3 ( x xn (t )) ,
n
where the Delta of Dirac gives the right value for en in the summation for every position
r
xn (t ) .
r r
About the relevant current density of matter/energy J ( x , t ) , we obviously have:
r
r r
r
dxn (t )
3 r
J ( x , t ) = en ( x xn (t ))
dt
n
r
dxn (t )
3
in fact, en [ J / m ] , multiplied by
[m / s ] , really gives a current of joule per square
dt
meter.
r r
dx (t )
In components: J ( x ) = en 3 ( x xn (t )) n
and, of course: J 0 = and xn0 (t ) = ct .
dt
n
Now, this summation is over the points n; in order to have the total value, one must
integrate also over the time:
dxn (t ' )
J ( x) = dt ' ( x xn (t ' ))J ( x ) = dt ' en ( x xn (t ' ))
; now, by multiplying numerator
dt '
n
and denominator by c, as de proper time is d = cdt ' , well have:
J ( x) = d en 4 ( x xn ( ))
n
dxn ( )
d
dxn ( )
is.
d
r r
r r
r r
dx i (t )
dx i (t )
Moreover, J ( x, t ) = en i 3 ( x xn (t )) n = en i 3 ( x xn (t )) n =
xn
x
dt
dt
n
n
r r r
r r
r
r
= en 3 ( x xn (t )) = ( x , t ) . If now we bring ( x , t ) together with J ( x , t ) , we
t
t
t
n
will have the 4-divergence (see also App.1):
J ( x ) = 0 (the invariance on Lorentz is clear).
(2.28)
x
r
Moreover, Q (mat energ ) = d 3 xJ 0 ( x ) = d 3 x ( x , t )
J (x) is a 4-vector, ad so
------------------
(2.29)
(2.30)
(*): In reality, we will consider the mass m as a mass referred to the unity of volume
[kg/m3]
the TENSOR momentum-energy:
r
r r
T 0 ( x , t ) = pn (t ) 3 ( x xn (t ))
(2.31)
r
r r
dxi (t )
T i ( x , t ) = pn (t ) n 3 ( x xn (t )) (i , on the contrary, refers to the three spatial
dt
n
components) and, all together, in a more compendious form:
dxn (t ) 3 r r
T ( x) = pn (t )
( x xn (t )) ( xn0 (t ) = ct )
(2.32)
dt
n
The first one is a moment (p), actually, and the second is an energy, indeed (p x v). As
before, we summed over the particles n.
(Then, by summing also over the time, wed have, here too, after having multiplied
dx
numerator and denominator by c: T = d pn n 4 ( x xn ( )) )
d
n
Now, (2.32), through (2.30), becomes:
T ( x) =
n
pn pn 3 r r
( x xn (t ))
( En / c 2 )
=
x
x
t
p
t
T
(
x
,
t
)
p
(
t
)
(
(
))
(
)
n n dt xi
n n dt xi ( x xn (t )) =
n
x i
n
= pn (t )
n
r
r r
3
dp (t )
v
( x xn (t )) = T 0 ( x , t ) + n 3 ( x xn (t ))
t
t
dt
n
0 r
T ( x , t ) in the last equation is made of those two terms it has on its sides, for the
as
t
rule of the derivation.
dpn (t ) 3 r r
i 0
=
Therefore,
T
T
=
T
+
n dt ( x xn (t )) = G ( x, t ) , that is:
x
t
x i
T = G , with:
x
r r
dpn (t ) 3 r r
d dpn ( ) 3 r r
d
r
G ( x, t ) =
( x xn (t )) =
( x xn (t )) =
f n (t ) 3 ( x xn (t ))
dt
d
n
n dt
n dt
where f n =
dpn
is obviously a force.
d
T = 0 !!!
x
Now, its very important to find a form for the tensor momentum-energy T , as well see
that in the Newtonian limit of the relativistic gravitation, a component of it appears (T 00 ) ,
so suggesting to involve, once we are out of the limit situation, all T indeed. Out of
simplicity, now we consider that c=1 (normalization).
Now we see that T = p + ( p + )U U and for fields of any intensity:
T = pg + ( p + )U U
(c=1)
(2.34)
proof:
lets put the symbol ~ over the quantities which refer to a system at rest; moreover, from
(2.32), we have that, in the right side, there is a product of a moment [(kg/m3)(m/s)] by a
velocity [(m/s)] (remind the note (*) on page 26) and so:
mass x velocity x velocity (=J) divided by m3, that is a pressure p.
(2.35)
Then, when the quantity dx/dt=d(ct)/dt=c is that which corresponds to the index zero, as
per (2.31), then well have on the right side the product p0 (mc, see (2.29)) by c, but
according to the note (*) on page 26, m is a and so we have c2. Lets sum up:
~
~
~
~
T ij = p ij [Pa ] , T i 0 = T 0 i = 0 , T 00 = , that is: ( c 2 with c=1 [Pa ] )
(2.36)
As T is a tensor, lets transform it according to Lorentz, as per (2.33), to get its values for
a generic system, that is, not at rest:
~
T = T ; well have: ( =
1
1 (V c )
2
1
1V 2
, with c=1)
T ij = p ij + ( p + ) 2V iV j
T i 0 = ( p + ) 2V i
T 00 = 2 ( pV 2 + )
~
~
~
T = T = i0 00T 00 + i j 0jT jj = 2V i + p (i j 0j ) = 2V i + p(ii 0i + ik 0k + il 0l ) =
i0
(
V
)
+
p
+
p
(
V
)
[(V i )2 + (V k ) 2 + (V l )2 ] +
2
2
4
V
V
V
2
( 1)
( 1)
( 1)
+ 2 p(V i )2
= 2 (V i )2 + p + p(V i ) 2
+ 2 p (V i ) 2
= p + 2 (V i ) 2 +
2
2
2
V
V
V
i 2
( 1)
(V )
+ p (V i )2
( 1 + 2) = p + 2 (V i ) 2 + p 2 ( 2 1) = p + 2 (V i ) 2 + p(V i ) 2 2 =
2
V
V
2
2
( 1)
= p + 2 (V i ) 2 ( p + ) . (as
= 2 = 2 if c=1)
V2
c
On the contrary, if i j:
~
~
~
~
~
T ij = i j T = i0 0j T 00 + ii jiT ii + i j jjT jj + ik jk T kk = (k i, j ) = 2V iV j +
( 1) i j ( 1)
( 1)
( 1)
][V V
] + p[V iV j
][1 + (V j )2
]+
2
2
2
V
V
V
V2
2
( 1)
jk
j k ( 1)
2 i j
i
j ( 1)
i 2 i
j ( 1)
+ V iV k
][
+
V
V
]
=
V
V
+
pV
V
+
p
(
V
)
V
V
+
(
=
0
)
V2
V2
V2
V4
+ p[1 + (V i )2
p[ ik ( = 0)
2
2
( 1)
( 1)
j 2 i j ( 1)
k 2 i j ( 1)
+
p
V
V
V
+
p
V
V
V
= 2V iV j + 2 pV iV j
+
(
)
(
)
4
4
2
V
V
V
V2
2
( 1) 2
i 2
j 2
k 2
2 i
j
i
j ( 1)
i j ( 1)
+ pV iV j
V
+
V
+
V
=
V
V
+
pV
V
+
pV
V
=
[(
)
(
)
(
)
]
2
V4
V2
V2
( 1)
( 2 1) 2
2 i
j
= 2V iV j + pV iV j
(
2
+
1
)
=
V
V
(
p
+
)
(as
= 2 = 2 if c=1).
2
2
V
V
c
+ pV iV j
Totally:
T ij = p ij + ( p + )V iV j 2 (for the spatial components)
T = p + ( p + )U U (for all 4 components, but in weak fields ( ))
dx i
dx i
=
= V e U 0 = c .
d
dt
At last, for any gravitational fields ( >>>> g ):
T = pg + ( p + )U U (c=1) .
where U i =
A free falling parachutist does not have any floor over which his body can rest; therefore,
he does not detect any gravitational acceleration and he feels as if floating in the vacuum.
He realizes he is falling only if he looks at the moving objects around. Therefore, for a free
r
falling particle, there is a reference system in which a = 0 , that is:
2
=0
(free falling in Euclidean coordinates)
(2.37)
2
with d 2 = ik d i d k .
But we can see (2.37) in the following way:
2
d dx
d 2 x
2 dx dx
=0=
(
)=
+
2
d x d
x d 2 x x d d
x
If we multiply both sides by
and consider that:
x
= , well have:
d 2x
dx dx
+
d 2
d d
(equation of the geodetic, where geodetic, on the Earth, is the shortest path between two
places)
2 x
with
=
.
x x
We already got such a relation in a context all geometric (see (1.35)). Now we get the
same relation starting from a direct calculation:
to it:
; now we apply
x x
x
g
2
2
2
=
;
if
we
now
remember
that
, we
x x x
x
x x x
x x
x
have:
=
+
=
g + g
x x
x x
x
(2.39)
g
g
and
, from which:
x
x
g g g
k
; now, by defining a reciprocal matrix (or tensor) g so that:
+ = 2 g k
x
x
x
g g k = k , well have, therefore:
g
g
1
g
= g ( +
),
(2.40)
2
x
x
x
which is exactly what we got in a purely geometrical context in Chapter 1.
Par. 2.8: The Newtonian limit.
r
r
We know that in the Newtonian limit (V<<c): d 2 = c 2 dt 2 dx 2 = c 2 dt 2 V 2 dt 2 c 2 dt 2
This is to say that V = dx i / dt dx i / d << dx 0 / d dx 0 / dt = d (ct ) / dt = c , that is,
indeed: dx i / d << dx 0 / d .
d 2x
dt
+ 00 ( ) 2 = 0 (with the convention c=1); moreover, as, in this
So, (2.38) becomes:
2
d
d
limit, the field is stationary, g tends to (const) and so the temporal derivatives of
g are zero, and so, according to (2.40):
1
g
1
h
00 = g 00
e g = + h , with h << 1 and so: 00 = 00 and:
2
x
2
x
r
d 2 x 1 dt 2
= ( ) h00 = 0 from which:
d 2 2 d
r
d 2x 1
= h00 = 0 and
dt 2 2
d 2t
dt
= 0 from which:
=C.
2
d
d
(2.41)
r
r
mM
GM
Now, we know from Newtons gravitation that: ma = G 2 r , from which: a = 2 r ,
r
r
2r
r d x
GM
GM
GM
) = (con =
) and so: a = 2 = and from both this one
but: 2 r = (
r
r
r
dt
and (2.41), we have: h00 = 2 + const ; as at infinite: h00 = = 0 , then const=0 and:
g 00 = 00 + h00 = 1 2 = (1 + 2 )
(2.42)
Poissons equation:
r
now, we define, with simplicity, the flux of the acceleration vector a :
r
r
r r
GM
GM
dS
(a ) ; we have: d(a ) = a dS = 2 r udS = 2 cosdS = GM 2n = GMd , from
r
r
r
which:
r
r r
(a ) = a dS = GM d = 4GM , but: M = ( x, y, z )dV , from which:
S
r r
r
r r
(a ) = 4G ( x, y , z )dV = a dS = for _ Theorem _ of _ Div. = adV , that is:
V
S
V
r r
a = 4G ( x, y, z )
r 1
r
r
Now, as we know from mathematics that ( ) = 2 , then: = a and so:
r
r
2
= = 4G (Poissons Equation)
(2.43)
1 g g g
g ( + ) , that is, exactly what we got at
x
2
x
x
Chapter 1, through (1.35), in a purely geometrical basis. Now, it could be possible, but a
bit boring, to deduct the form of the Riemamm-Christoffel curvature tensor through direct
calculations, purely mathematical, exactly like in Par. 2.7, but we would get exactly what
already obtained at Chapter. 1 with (1.41), here reported again, and obtained in a more
suitable geomertical basis and where we will use Greek letters for the indexes, to show
that here we are talking about gravitational fields with any intensity and also reminding
here that those indexes have four values each (space-time), three for space and one for
time:
= ( ) ( ) + =
+
k k
k
x
x
(2.43)
and also R
Rk , from which, also: Rk = g R
k = g
k and reminding the expression
g k [ g (
+ )] g [ g ( k + k k )] +
2
x
x
x
x
2
x
x
x
x
+ g [ k k ]
(2.44)
Rk = g R
k =
g ij
= g j ik + g i k , we have:
k
u
g = g k g = g (k g + k g )
(2.45)
k
x
x
where we have made a small rearranging of indexes, which have (those indexes) generic
values, that is, we dont care if we use j or k; whats important is that they can have all
four values, as we already know, and that their repetition is consistent.
g
2 g
2 g
1 2 g
2 g
Rk = [ k k k + k )] [k g + k g ]
+ [ g +
g ]k +
2 x x
x x
x x
x x
+ g [
k k
]
that is:
2 g
2 g
1 2 g
2 g
]
Rk = [ k k k + k )] + g [ k k
2 x x
x x
x x
x x
(2.46)
As already made at the end of Par. 1.3, we deduce three properties of the tensor Rk ,
which are directly verifiable:
-Simmetry Rk = Rk
-Antisimmetry Rk = Rk = Rk = Rk
-Cyclicity Rk + Rk + Rk = 0
The Ricci Tensor:
Rk = g Rk
( Rk = Rk )
(2.47)
2 x x x
x x
x x
x x
and so, by direct verification, we have:
Rk ; + R ; k + Rk ; = 0
By contracting (by multiplying with), in the above equation, , with g , we have:
Rk ; R ; k + Rk ; = 0 and by contracting again:
R; R; R ; = 0 which is the same as to say also that (the last two terms are similar:
2x >>> 1/2):
1
( R R); = 0 and
2
( R
1
g R ); = 0
2
(2.49)
They are 16 equations, actually, as they contain rank 2 tensors, that is, with two indexes
each, and everyone of them can have 4 values, and so 4x4=16, but such equations are
not all linearly independent among them, that is, there are doubles, and the independent
ones are ten, indeed.
We know from (2.42) that g 00 = (1 + 2 ) (contact point with Newtons theory and starting
base), while from (2.36) we know that, for non relativistic matter: T00 = c 2 = (with
normalization c=1); we also have that:
g 00 = 2 g 00 = 2[(1 + 2 )] = 2 2 = 8G = 8GT00 , that is:
2 g 00 = 8GT00 ; so we can suppose, out of extension, that the following equality holds:
G = 8GT and for gravitational fields of any intensity:
G = 8GT
Lets deduce, now, five peculiarities G must have:
A)by definition, G is a tensor, as the momentum-energy tensor T is
B) G is consisting of terms with second derivatives of the metric tensor (just look at
2 g 00 )
C) G is symmetric, as well as T
D)as T is conserved ( T ; = 0 ), then G and similars are, as well ( G; = 0 )
E)for weak stationary fields, non relativistic ones, we have G = 2 g 00
A and B say that G is proportional to the curvature tensor (2.46), or better to (2.48),
clearly made of second derivatives of the metric tensor.
Moreover, the symmetry of indexes wants that the curvature tensor is represented by the
Ricci tensor Rk = Rk and by the symmetric, as well, R = R (see the paragraph on the
Ricci tensor):
G = C1R + C2 g R
(3.1)
1
g R)
(3.2)
2
Now, because of the peculiarity E, we figure out C1: for non relativistic systems, we always
have:
1
Tij << T00 , that is: Gij << G00 , from which, for the above (3.2): Rij gij R ; moreover,
2
3
R
g (Minkowskis tensor) and so: Rkk R and R00
.
2
2
(3.2) with = = 0 ( g 00 00 ) yields:
1
G00 = C1 ( R00 (1)2 R00 ) = 2C1R00 ; moreover, in case of weak fields, we can say (see
2
c
(2.46) with ab =0 or directly (2.48)):
Therefore: G = C1 ( R
2 g k
2 g
1 2 g
2 g k
Rk = [ k k + )] and Rk = Rk ; being the field static, the
2 x x
x x
x x
x x
temporal derivatives are zero:
2 g
2 g
1
1
1
1
R00 = R 0 0 = ( 00 ) = ij ( i 00j ) 00 0 = 2 g 00 , from which:
2
x x
2
x x
2
2
1 2
1
G00 = 2C1 g 00 = C1 2 g 00 , from which ( C1 = 1 ) G = R g R and so:
2
2
1
R g R = 8GT
(3.3)
2
which are the Einsteins equations of the gravitational field, and we rewrite them:
1
R g R = 8GT
2
which tell us that the curvature ( R , R ) of the space-time is equal to the presence of
matter-energy ( T ) in it!!!
Now, by contracting with g , we have: R 2 R = 8GT , that is: R = 8GT and so:
1
g T ) (another form for the Einsteins equations).
2
In the vacuum, f(T)=0 and so R = 0 .
R = 8G (T
We still have c=1, as a simplifying convention. Now, we define a general metric tensor
through which a gravitational field is static and isotropic; static means that the metric
tensor does not depend on time, about its form and its characteristics, with a clear
reference to its coefficients. Isotropic means that there is a dependance from the
irrotational invariants; in fact, we know that the norm of a vector and the scalar product
between two vectors are invariant for rotations:
r
r2
r
r r
x 2 = x , (dx ) 2 , x dx
All this for orthogonal coordinates almost Minkowskian (almost )
d 2 = g dx dx , d 2 = F (r )dt 2 2 E (r )dtx dx D (r )( x dx) 2 C (r )dx 2
r r
r = ( x x )1 / 2 and in spherical coordinates:
X3
x1 = r sin cos
x2 = r sin sin
x3 = r cos
P(r, , )
(4.1)
r sin d
r
r
X2
x1
dr
rd
g = r 2 ,
g = r 2 sin 2
g tt = B 1 (r ) .
=
Then, as we know that according to (2.40):
1 g g g
g ( + ) , it comes out
2
x
x
x
= sin cos , r = r = ,
=
= cot , trt = rtt =
.
2 B(r ) dr
r
of the (2.43)):
Now, we calculate the Ricci tensor ( = in Rk
Rk =
+ k k and we remind that
is symmetric over and k ,
x k
x
x k
also by a direct verification; therefore, we totally have:
Rrr =
R = 1 +
1
r
A' (r ) B' (r )
)+
(
+
2 A(r ) A(r ) B(r )
A(r )
R = sin 2 R , Rtt =
(4.3)
(4.4)
Then, for r , the metric tensor g must get close to the Minkowskis tensor in
spherical coordinates, that is: lim r A(r ) = lim r B(r ) = 1 , from which, for the (4.4):
1
A(r ) =
and by using this one in the expressions for R and Rrr , we have:
B(r )
B' ' (r ) B' (r ) R' (r )
+
=
R = 1 + B' (r )r + B(r ) and Rrr =
; by putting R = 0 , we have:
2 B(r ) rB(r ) 2rB (r )
d
rB(r ) = rB ' (r ) + B(r ) = 1 , from which: rB(r ) = r + const .
dr
GM
Moreover, for r : g tt = g 00 = B = 1 2 ( =
)
r
2GM
2GM 1
B(r ) = [1
] and A(r ) = [1
] and so, finally:
r
r
2GM 2
2GM 1 2
d 2 = [1
]dt [1
] dr r 2 d 2 r 2 sin 2 d 2
(4.5)
r
r
(Schwarschilds solution)
Par. 4.3: The general equations of motion.
We know that d 2 = B(r )dt 2 A(r )dr 2 r 2 d 2 r 2 sin 2 d 2 and we also consider the
geodetic equation (2.38):
d 2 x
dx dx
+
dp 2
dp dp
by making change:
0=
d 2 r A' (r ) dr 2
r d 2 r sin 2 d 2 B' (r ) dt 2
+
(
)
( )
( ) +
( )
dp 2 2 A(r ) dp
A(r ) dp
A(r ) dp
2 A(r ) dp
(4.6)
0=
d 2 2 d dr
d
+
sin cos ( ) 2
2
dp
r dp dp
dp
(4.7)
0=
d 2 2 d dr
d d
+
+ 2 cot
2
dp
r dp dp
dp dp
(4.8)
0=
d 2t B ' (r ) dt dr
+
dp 2 B(r ) dp dp
(4.9)
Now, as the field is isotropic, we put = 2 and so the last two equations, (4.8) and
(4.9), becomes:
d
d
d
dt
[ln
+ ln r 2 ] = 0 and
[ln
+ ln B] = 0 , from which:
dp
dp
dp dp
d
r2
= J (constant)
(4.10)
dp
dt
B = const (=1, by choice)
(4.11)
dp
dt 1
=
. Now, by putting (4.10), (4.11) and the condition ( = 2 ) used
from which:
dp B
before, in the (4.6), well have:
dr
d 2 r A' (r ) dr 2
J2
B' (r )
+
and by multiplying, now, by 2 A(r )
0= 2 +
( ) 3
:
2
dp
r A(r ) 2 A(r ) B (r )
2 A(r ) dp
dp
d
dr
J2
1
[ A(r )( )2 + 2
] = 0 that is:
dp
dp
r
B (r )
dr 2 J 2
1
(4.12)
) + 2
= E (constant)
dp
r
B(r )
If now we make a system with the equations ( = 2 ) just used, then the (4.10), (4.11)
and (4.12), we get:
d 2 = Edp 2
(4.13)
We know that E=0 for photons and E>0 for material particles.
As A(r) is always positive, we have that the particle can reach r only if (see (4.12)):
J2
1
+E
. Then, by using (4.11) in (4.10), (4.12) and (4.13), we get:
2
r
B(r )
d
r2
= JB(r )
(4.14)
dt
A(r ) dr 2 J 2
1
( ) + 2
= E
(4.15)
2
B (r ) dt
r
B(r )
and d 2 = EB 2 (r )dt 2
(4.16)
d
Now we know that, for weak fields: B 1 = 2 r 2
= J and
dt
1 dr 2 J 2
1 E
( ) + 2 +
(4.17)
2 dt
2r
2
1
1
=
( forTaylor ) (1 2 )
as:
B(r )
1 + 2
(4.17) has got a similar correspondance in Newtons classic mechanics.
A(r )(
r2
d
=J
dp
dr 2 J 2
1
A(r )( ) + 2
= E
dp
r
B(r )
A(r ) dr 2 1
1
E
( ) + 2 2
= 2 ,
4
r
d
r
J B(r )
J
(4.18)
(4.19)
()
0
RS
(r )
r0
(4.20)
(4.21)
d
dr
= ( )r = bV = J
dt
dt
1
1 + V 2 )1 / 2 and
For r = r0 we have that dr / d = 0 and (4.18) then becomes: J = r0 (
B(r0 )
(4.19) becomes, after an easy calculation:
b r ( ) , from which: 0 = dr ( ) + rd , and so: r 2
( r ) = ( ) +
A1 / 2 (r )dr
1 1
1
1
r 2[ 2 (
1 + V 2 )(
1 + V 2 )1 2 ]1 / 2
r0 B(r )
B(r0 )
r
(4.22)
The total variation of is: 2 (r0 ) , while, if the ray of light walked unperturbed, we
would have a variation of , so, with reference to Fig. 4.1, we have: = 2 (r0 ) ;
for a photon, V 2 = 1 and (4.22) yields:
2 dr
r
B(r )
(r ) () = A (r )[( ) 2 ( 0 ) 1]
r
r0
B (r )
r
Now, by using the (Taylors) developments due to Robertson:
1/ 2
(4.23)
GM
GM
+ .... , B(r ) = 1 2
+ .... , we have:
r
r
GM
1 2
+ ....
1 1
r
r 2 B(r0 )
r 2
r0
) 1 = ( ) [
( ) (
] 1 = ( ) 2[1 + 2GM ( ) + ...] 1
r0
r r0
r0
B( r )
r0 1 2 GM + ....
r
(r r )
2GMr
r
r
r
[( )2 + ( )2 2GM 0
1] = [( ) 2 1][1
+ ...]
rr0
r0
r0 (r + r0 )
r0
r0
A(r ) = 1 + 2
r0
r
= cos x , while for the third, put 0 = t and
r
r
1 t
)
1+ t
2
1 r
GM
GMr
A (r ) [( ) 2 1] [1 +
+
+ ....]dr that is:
r r0
r
r0 (r + r0 )
1/ 2
1st
Int.
2nd
Int.
3rd
Int.
r
GM
r
r r0
(r ) () = sin 1 ( 0 ) +
[1 + 1 1 ( 0 ) 2
] + ... and so:
r
r0
r
r + r0
=
4GM
4GM
, and if we remind our normalization (c=1), we finally have: =
; with
r0
r0c 2
This method (Firk) is based on the variation of velocity the light undergoes when it
approaches a mass; for this reason I see profiles of antagonism to pure GTR. Then, there
exsist also other methods, more or less similar, based on such a supposition (for instance
Whlin) and it seems that, if we take into account the smallest cyphers after the point,
those results are even more similar to experimental values.
First of all, we remind that, according to Schwarzschild (see, for instance, (4.5)):
V c
Deflection angle
V <c
V c
Wavefront
Sun
dy
dx=Vdt
Plane waves
of light
y=0
R
Sun (M)
r y y 0 = R r
Now:
V
y
V r V r
2GM
2GM r
=
=
(c[1
]) = 2
, from which:
2
y y r y r
rc
r c y
=
y 0
2GM r
r 2c y
=
y 0
2GM R 2GMR
=
.
r 2c r
r 3c
Now, we calculate the difference between the paths dx and dx of wavefronts at a vertical
distance y and y+dy, at which light has got velocities V and V respectively:
dx=Vdt and dx=Vdt, from which:
dx- dx =Vdt-Vdt=dt(V-V) ;
(4.27)
moreover, we have, for Taylor: V ' = V + (V y )dy , that is: V 'V = (V y )dy and (4.27)
becomes:
dx'dx = (V y )dydt
(4.28)
Then, still from Figure 4.3 and from (4.28), we have:
d = (dx ' dx ) dy = (V y )dt = (V y ) dx V .
The total deflection from and + is, by considering that, in such a range, V is
almost always equal to c (except for when its right close to M):
+
1
1 +
(V y )dx (V y )dx and, close to the surface of M (y=0):
V
c
= d =
1 + 2GMR
2GMR +
dx
2GMR
x
=
dx =
=
3
2
2
2 3/ 2
2
2
2
c
rc
c
(R + x )
c
R ( R + x 2 )1 / 2
2GMR 2
2 , that is:
c2
R
4GM
=
= 1,75' ' , right what we got in Par. 4.4!!!
Rc 2
Par. 4.6: The precession of the perihelion of planets.
a
a 1 e2
r-
r+
ea
a focus=Sun
dr
= 0 . Then, we already know that (see (4.18)):
d
A(r ) dr 2 1
1
E
1
1
E
( ) + 2 2
= 2 ; this one, in r+ e r , becomes: 2 2
= 2 ,
4
r
d
r
J B(r )
J
r J B(r )
J
In r+ e r , we have that
1
1
r+2
r2
B(r+ ) B(r )
B(r+ ) B(r )
from which: E =
and J 2 =
2
2
1 1
r+ r
r+2 r2
We have: (r ) = (r ) +
(r ) (r ) = [
r
(4.29)
A1 / 2 (r )dr
, from which, for (4.29), we have:
1
1
E
r 2[ 2
2 2 ]1 / 2
J B(r ) J
r
r2 [ B 1 (r ) B 1 (r )] r+2 [ B 1 (r ) B 1 (r+ )] 1 1 / 2 1 / 2
2 ] A (r )r 2 dr
1
1
2 2
r+ r [ B (r+ ) B (r )]
r
(4.30)
The total variation of is: = 2 (r+ ) (r ) . If we did not have any precession, we
would have:
2 = 2 . The precession of the orbit is: = 2 (r+ ) (r ) 2 .
We remind the Robertsons developments on pag. 39:
GM
GM
A(r ) = 1 + 2
+ .... , B(r ) = 1 2
+ ....
r
r
We need a 2nd order development for B 1 , otherwise, in (4.30), B doesnt yield anything
1
2 . For B 1 (r ) we then have:
r
GM
G 2M 2
+ 4 2 + .... .
B 1 ( r ) 1 + 2
r
r
1
Through such developments, the root in (4.30) can reduce to a quadratic form in
;
r
anyway, we can notice that such a quantity cancels for r = r , therefore:
r2 [ B 1 (r ) B 1 (r )] r+2 [ B 1 (r ) B 1 (r+ )] 1
1 1 1 1
2 = C ( )( )
2 2
1
1
r+ r [ B (r+ ) B (r )]
r
r r r r+
C can be calculated by executing the lim r :
R=
r+2 [1 B 1 (r+ )] r2 [1 B 1 (r )]
; now, by factoring on both numerator and denominator:
r+ r [ B 1 (r+ ) B 1 (r )]
1 1
2(r r+ ) MG , we get: C 1 2MG ( + ) ; with such results in (4.30), we get:
r+ r
GM
[1 +
]dr
1 1 r
r
(r ) (r ) ......... [1 + MG( + )]
; now, we define:
r+ r r r 2 [( 1 1 )( 1 1 )]1 / 2
r r r r+
1 1 1 1
1 1 1
= ( + ) + ( ) sin
(4.31)
r 2 r+ r
2 r+ r
we get: ( r = r = 2 ); moreover, we just get dr as a function of d in (56.1) and
make a replacement in the integral in dr:
C=
1 1
1 1
1
3
(r ) (r ) ......... [1 + MG ( + )][ + ] MG( ) cos .
2
2 2
r+ r
r+ r
For the (4.31), at the aphelion, = 2 , so: = 2 (r+ ) (r ) 2 = (
where L =
6MG
) [rad/rev]
L
1 1 1
( + ) (straight semiside).
2 r+ r
Now, as we know that r = (1 e)a and L = (1 e 2 )a (see note (**) below), we have:
6MG
= (
) and, if we do not forget our initial normalization (c=1), we have:
L
6MG
= (
) ; for Mercury, L = 55,3 109 m , from which = 0,1038' ' . Now, as in a century
2
Lc
Mercury makes 415 revolutions, we have century = 43,03' ' , in perfect agreement with
experimental measurements, as the very first measurements on Mercury started in 1765,
and Clemence, in 1943, calculated:
= 43,11' '0,45' ' .
---------------------------(**): some considerations on the ellipse:
y=directrix
P(x,y)
x
Focus=(p,0)
Appendixes:
App. 1: The Special Theory Of Relativity.
Contents of App. 1:
-Contents of App. 1.
- App.1-Introduction.
Page.1
Page.1
Page.3
Page.3
Page.3
Page.5
Page.6
Page.6
Page.7
Page.8
Page.8
Page.8
Page.9
Page.9
Page.10
Page.11
Page.11
Page.11
Page.11
Page.12
Page.12
Page.13
Page.14
Page.15
Page.16
Page.16
Page.19
Page.19
- App.1-SUBAPPENDXES:
App.1-Subapp. 1: Lorentz Transformations in succession.
App.1- Subapp. 2: Transversal (relativistic) Doppler Effect.
App.1- Subapp. 3: The Transformations of the four-velocity.
App.1- Subapp. 4: The transformations of the four-force.
App.1- Subapp. 5: The acceleration four-vector and the transformations of the acceleration.
App.1- Subapp. 6: As I see the Universe (Unification Gravity Electromagnetism).
Page.21
Page.21
Page.22
Page.24
Page.24
Page.25
Page.26
App.1-Introduction:
Time is just the name which has been assigned to a mathematical ratio relation between two different spaces; when I
say that in order to go from home to my job place it takes half an hour, I just say that the space from home to my job
place corresponds to the space of half a clock circumference run by the hand of minutes. In my own opinion, no
mysterious or spatially four-dimensional stuff, as proposed by the STR (Special Theory of Relativity). On the contrary, on
a mathematical basis, time can be considered as the fourth dimension, as well as temperature can be the fifth and so
on. The speed of light (c=299.792,458 km/s) is an upper speed limit, but neither by an unexplainable mystery, nor by a
principle, as asserted in the STR and also by Einstein himself, but rather because (and still in my opinion) a body cannot
move randomly in the Universe where its free falling with speed c, as its linked to all the Universe around, as if the
Universe were a spiders web that when the trapped fly tries to move, the web affects that movement and as much as
those movements are wide (v~c), that is, just to stick to the web example, if the trapped fly just wants to move a wing,
it can do that almost freely (v<<c), while, on the contrary, if it really wants to fly widely from one side to the other on
the web (v~c), the spiders web resistance becomes high (mass which tends to infinite etc). On this purpose, see
Appendix 2.
00:01
00:02
light source
00:02
V
ct
ct
ct
Vt
mirror
Fig. A1: Light clock not moving.
As you can see in Fig. A1, every time light (blue arrows) goes from source to mirror and back, the light clock says, for
instance, one second, or a certain time t. The path in blue shown in Fig. A1 is seen by those who are not moving with
respect to the clock, i.e. by who is on the space ship with the clock itself. On the contrary, those who are on the Earth
and see the clock moving on the ship, will see the light travelling diagonally longer paths, as shown in Fig. A2, as the
mirror moves while the light goes downwards, and the source moves, too, when the light goes back upwards. Now, as
we are talking about light, the behaviour of it during its going downwards is not like that of a suitcase falling from the
luggage compartment of a railway wagon, which is seen to fall vertically by the passenger on it and by a parabolic
trajectory by the observers not moving, on the platform at the station, so taking the same time for both of them, as in
the latter case (parabolic) the falling speed is higher; we are here talking about light, therefore its speed must be the
same for all, and c; but if its so, then those who see the longer diagonal path must say that time taken by light to go
down and up must be longer. Therefore, despite were talking about just one clock and one event, those two observers
come to different results, so to the relativity of time and to all its implications.
Using the Pithagorean Theorem on the triangle in Fig. A2, we have:
c t = c t ' +V t
2 2
2 2
2 2
, from which:
V2
t'= t 1 2
c
t'< t
I remind you that t is the time of the astronaut who is travelling with the clock, while t is the time elapsed on the Earth.
If all this is true for the fastest thing (light), then its also true for standard hands clocks and also for the biologic ones
(living beings)! In the seventies, by using very sensitive atomic clocks, they proved the time dilation on the Earth,
between two atomic clocks which were synchronized, at the beginning, after that one of them flew on a plane,
underwenting a slight, but well felt, time dilation.
y
P
r
r
0
r
V
r
r'
0
x _ x
z
Fig. A1.1: Reference systems in relative motion.
We obviously have:
r r
r r
r = r '+00' = r '+Vt ,
(A1.1)
{
{
x = x'+Vt '
y = y'
z = z'
t = t'
(A1.2)
x' = x Vt
y' = y
z' = z
t' = t
(A1.3)
r r r
v = v '+V which can be held as the theorem of summation of velocities in classic physics.
x' = k ( x Vt )
x = k ( x '+Vt ' )
Now, for a photon, we obviously have:
(A1.4)
(A1.5)
ct ' = k (c V )t
and
ct = k (c + V )t ,
as light has the same speed c in both reference systems, from which, by
k=
V2
1 2
c
V2
)
c2
1
, from which:
(A1.6)
1 2
1 x
( x' ) and using (A1.4) in it, we have:
V k
1 x
1
kx
x
1
V
t ' = [ k ( x Vt )] =
x + kt = k [t (1 2 )] = k[t 2 x]
V k
kV
V
V
k
c
2
1
V
as, for (A1.6), we have: (1 2 ) = 2 .
k
c
Moreover, from (A1.5) we have:
t'=
(A1.7)
By the same way which led us to (A1.7), we also get the expression for t.
Finally, here are the Lorentz Transformations:
{
{
x' =
( x Vt )
1 2
y' = y
z' = z
t'=
x=
(A1.8)
V
x)
c2
1 2
(t
( x'+Vt ' )
1 2
y = y'
z = z'
V
( t '+ 2 x ' )
c
t=
1 2
(A1.9)
-SECOND PROOF:
We know that c=const in all inertial reference systems. Now, with reference to Fig. A1.1, when 0=0 and t=t, from the
origin light is emitted through spherical waves and isotropically and so we can write that:
c 2t 2 ( x 2 + y 2 + z 2 ) = 0
and
{
{
and
(A1.10)
(A1.11)
dx
= 0 , as the reference system (0,x,y,z) is not moving with respect
dt
dx'
= V , as the system (0,x,y,z) moves with speed V with respect to
dt '
d
V
d '
= 0 and
= i , but from the ratios between (A1.11) we have that:
consequence:
d
c
d '
d
cos sin
V
d ' d cos d sin d
0 sin
= tg and so: tg = i = i
=
=
=
d
c
d ' d sin + d cos
sin + cos 0 + cos
d
1
1
but we know from trigonometry that: cos =
=
and:
2
1 + tg
1 2
tg
i
sin =
=
and so the (A1.10) become:
2
1 + tg
1 2
to itself. On the contrary,
'=
{
x' =
'=
i +
1 2
, that is:
( x Vt )
y' = y
z' = z
t' =
and
0 and, as a
1 2
x)
c
1 2
(t
xB x A = l
( xB Vt B ) ( x A Vt A )
1
( xB x A )
1
l
1 2
the segment makes sense if both ends are detected simultaneously (tA=tB).
When v tends to c,
=v c
Therefore, the length l measured in O will be that measured in O by a value less than 1, that is, the observer at rest (O)
will detect a shorter object.
t = t B t A =
, but, by assumption,
t =
t '
1 2
When v tends to c,
=v c
will tend to 1 and the radical will tend to zero, as well as t ' !
Two twins separate as one leaves for a spatial travel one month long and at speeds close to that of ligth; once back to
the Earth, he sees the other twin thirty years older! (Twin Paradox)
At a speed of 260.000 km/s you have the halving, so the radical will be and those two times will go by one a half of
the other.
See also the proof of the time dilation by the ligth clock (in the Introduction) and also that on a Doppler Effect basis
(App.1-Par. 3.6).
App.1-Par. 1.5: The four-vector position.
Instead of writing the position vectors with the three classic components x, y and z, lets write them in a mathematically
four-dimensional form, by adding time; this will be very useful. In the (justified) opinion of the writer, our Universe is
three-dimensional and the adding of a fourth dimension is a purely mathematical operation; in fact, I defy you to show
me the fourth dimension of a whatsoever object which is held four-dimensional. In the nowadays STR, a real four
dimension is believed!
Well, so:
x'1 = x1 x4
x'2 = x2
x'3 = x3
x'4 = x1 + x4
where
=V c
x1 = x'1 + x '4
x2 = x '2
x3 = x'3
x4 = x'1 +x'4
1
1 2
(A1.12)
You can prove the space-time distance between two points is invariant for Lorentz Transformations, i.e. it is the same in
all inertial reference systems:
(x) 2 = (x1 ) 2 + (x2 ) 2 + (x3 ) 2 (x4 ) 2 = (x ') 2 = (x'1 ) 2 + (x'2 ) 2 + (x'3 ) 2 (x'4 )2
(A1.13)
0
( x '1 , x'2 , x'3 , x'4 ) =
0
0
( x1 , x2 , x3 , x4 ) =
0
0
1
0
0
0
1
0
0
0 x1
0
0 x2
1
0 x3
0
x4
and
0 x'1
0 0 x '2
1 0 x '3
0 x '4
(A1.14)
(A1.15)
x'i = ik xk
(A1.16)
xk = 'ik x'i
(i,k=1,2,3,4)
(A1.17)
vx = dx dt
v y = dy dt
vz = dz dt
dx =
1 2
dy = dy '
dz = dz '
V
(dt '+ 2 dx' )
c
dt =
1 2
from which:
(dx'+Vdt ' )
V
(dt '+ 2 dx ' )
c
dy ' 1 2
v y = dy dt =
V
(dt '+ 2 dx' )
c
dz ' 1 2
vz = dz dt =
V
(dt '+ 2 dx' )
c
vx = dx
dt
{
vx =
vy =
(v 'x +V )
Vv '
(1 + 2 x )
c
v' y 1 2
Vv '
(1 + 2 y )
c
v' x =
(A1.18)
v' 1 2
vz = z
Vv '
(1 + 2 z )
c
v << 1
When V << 1 and x
c
c
and similarly:
(v x V )
Vv
(1 2x )
c
v' y =
v' z =
vy 1 2
Vv
(1 2y )
c
vz 1 2
Vv
(1 2z )
c
If we use again the example of the railway train car, where a guy walks inside, if we say
and
and if
(v 'x +V )
Vv '
(1 + 2 x )
c
(A1.19)
v' x = V = c , then vx = c ,
and not 2c! Therefore, if the train moves with a speed c and I run inside at c, as
well, with respect to the platform, Ill have a resulting speed equal to c and not 2c!
(1.19) represents the Relativistic Theorem of Addition of Velocities.
As an example: two rockets travel each with speed c/2 and meet; at which velocity
vx =
(c 2 + c 2)
c
4
=
= c<c
2
c
54 5
(1 + 2 )
4c
vx
do they meet?
of a particle.
If a particle is at rest in (O,x,y,z), i.e. if it moves in O, indeed, i.e. if O is its proper reference system, then: dx=
dy= dz=0 and:
ds
).
c
Therefore, when you make calculations on a particle, you are led to use for it its proper time, indeed:
v2
dt
d = (1 2 )dt =
c
proper time d instead of dt, which is typical of the particle, indeed, for which we are going to define the four-vector:
dx
m dx m dx m dx m dx
dx
dx
dx1
, m0 2 , m0 3 , m0 4 ) = ( 0 1 , 0 2 , 0 3 , 0 4 ) =
d
d
d
d
1 dt 1 dt 1 dt 1 dt
r
r
dx
dx
dx
dx
= (m 1 , m 2 , m 3 , m 4 ) = (mv , mc) = ( p, mc) = p
dt
dt
dt
dt
r
r
where v is the (three-dimension) velocity vector, p is the three-dimension linear momentum,
dt
m
dx
mc = m 4 is the 4-dimension component, d =
is the proper time and m = 0 = m0
1
dt
p = (m0
m02
(c 2 v 2 ) = m02c 2 = constant, i.e. its not
2
v
(1 2 )
c
depending on v.
In Relativity there exist a Universe (mathematically 4-dimensional) described by 4-vectors, where quantities are not
changing so arbitrarily with speed and where laws of nature preserve some consistency, no matter what the state of
motion is.
App.1-Par. 2.2: The velocity four-vector.
We obviously define it as follows:
v=
dx
d
v=(
r
dx1 dx2 dx3 dx4
dx
dx
dx
dx
,
,
,
) = ( 1 , 2 , 3 , 4 ) = (vx , v y , v z , c ) = (v , c)
,
d d d d
dt
dt
dt
dt
v = 2 v 2 2 c 2 = c 2
(constant!).
(A2.1)
r
r
d r d
d
d
= ( F1 , F2 , F3 , F4 ) = ( F , F4 ) = (
p, (m0c)) = ( (m0v ), (m0c )) ;
d
d d
dt
dt
r r
r
d
so we have:
(m0v ) = f = F ,
dt
r
r
d
(
(m0v ) = f is the classic force, and its more so when = 1 )
dt
r
F
d r
d r
and so:
(v ) =
=
(v ) , and by components:
dt
m0 d
d
F
d
(vi ) = i =
(vi ) (i=x,y,z)
dt
m0 d
d
and then, about the fourth component:
(m0c ) = F4
dt
F=
dp
(A2.2)
(A2.3)
(A2.4)
(A2.5)
and so:
F
d
d
(c ) = 4 =
(c) .
m0 d
dt
(A2.6)
v = 2v 2 2c 2 = 2 v x2 + 2 v 2y + 2 v z2 2 c 2 = c 2 , so getting:
d
d
d
d
d
d
(v x ) 2 +
(v y )2 +
(vz ) 2
(c) 2 ) = (2vx
(v x ) + 2v y
(v y ) +
d
d
d
d
d
d
d
d
(v z ) 2c (c ))
+ 2vz
d
d
d
d
d
d
(vx ) + v y
(v y ) + +vz
(vz ) c (c)) , and, for (A2.4) and (A2.6):
that is: 0 = (vx
d
d
d
d
0=(
0 = (vx
F
F
F
Fx
+ v y y + +vz z c 4 )
m0
m0
m0
m0
f
f x
F
f
+ v y y + +vz z c 4 )
m0
m0
m0
m0
r r
F4 = ( f v ) .
c
0 = (vx
r r
f = F ):
, that is:
(A2.7)
F=
r r r
= (f , ( f v ))
d
c
dp
(A2.8)
To have the transformation equations for such a 4-force, please see Subappendix 1.4.
Par. 2.4: E0=m0c2.
d
r r
(m0c ) = F4 , whilst for (A2.7) we have: F4 = ( f v ) . Therefore:
dt
c
r
r
r
r
d
d
(m0c) = ( f v ) , that is: (m0c 2 ) = f v , that is, again:
dt
dt
r cr
2
(A2.9)
d (m0c ) = f v dt = dL = dE
(A2.9) is exactly the expression for the energy in classic physics, if = 1 ; the integration of (2.9) with integration
According to (A2.5), we have:
E = m0c 2
(A2.10)
In reality (A2.10) holds only for gained energies (as in particle accelerators), while for lost energies (collapsing Universe
or Atomic Physics of electrons going down in energy levels) the following must be used, and I assume it as mine:
E=
1
m0c 2
(Rubino)
(see also Appendix 2; for a convincing proof of it, please contact me: leonrubino@yahoo.it ).
Therefore, a particle whose mass is m0 has got a total energy:
E = m0c =
2
m0c 2
v2
(1 2 )
c
and at rest( v = 0 and so = 1 ) it has a rest energy:
E0 = m0c 2
(A2.11)
(A2.12)
1)
(A2.13)
v2
(1 2 )
c
1
1
=
, we get, for v<<c (<<1):
If now ve develop, according to Taylor, the expression for =
2
v
(1 2 )
(1 2 )
c
1
1 2 3 4
1 2 1 v2
=
=
+
+
.....
, that is: ( 1) =
1
and for (A2.13):
2
8
2
2 c2
(1 2 )
1 v2
1
EK = m0c ( 1) = m0c ( 2 ) = m0 v 2
2c
2
2
(v<<c) which is the well known classic expression (Newtons) for the
kinetic energy!
In order to have a proof of the (A2.13) starting from a collapsing Universe characteristics, please see into Appendix 2.
App.1-Chapter 3: Relativistic phenomena.
App.1-Par. 3.1: Time and gravity: gravity slows down the time!
Also gravity slows down the time! On a mountain time elapses faster than down in the valley. Of course, on the Earth,
the difference is imperceptible, but on a neutron star or in a black hole, that effect is very strong.
For a photon,
E = h
, but in relativity: E
= m0c 2 ,
m0 = h c 2 and so,
for :
We know that the escape velocity of a celestial body whose mass is M and radius R is:
V = 2GM R
. If on that
body an object is cast vertically with the escape velocity, it will quit the gravitational field of that celestial body and will
go towards the infinite, without falling down anymore.
A black hole is a body so compressed (big M and small R) that the escape velocity on its surface reaches the speed of
light and so not even the light can escape, from which the name of black hole; moreover, for what above said, we can
say that in a black hole time is approximately stopped!
App.1-Par. 3.2: Volume of moving solids.
Moving solids appear rotated.
B
L
L
z
y
A
Lsin
V
--Observer--
2 2 2 1 2
1 2
=
=
=
+
+
0
x 2 y 2 z 2 c 2 t 2
c 2 t 2
Now, we preliminarily notice that, according to the Lorentz Transformations, we have (by deriving them):
y ' z '
x' x' y '
=
= 1,
=
=
= ...... = 0
y z
y z x
r
According to mathematical analysis, we have, in 0: = ( r ' , t ' ) , and so:
x'
x '
t '
V
= ,
= V ,
= 2
x
t
x
c
t'
=
t
=
+
+
+
=
+ (V )
x x ' x y ' x z ' x t ' x
x'
t '
2
2 V 2 2
2V
2
=( 2 + 4 2) 2
x 2
x '
c t '
c V 2 x' t '
= V
+
t
x'
t '
and
; furthermore:
2
2
2
2
2
2
= (V
+
) 2V
t 2
x '2 t '2
x ' t '
and
2 2
=
y 2 y '2
2 2
=
z 2 z '2
2 2 2 1 2 2 2 2 1 2
+
+
=
+
+
Inverted prism
Mirror
P
V
Light
source
Water
c 3 108 m / s
=
225.000km / s ,
n
1,33
water. If now water, or the fluid, in which we are going to measure the speed of light, flows with speed V, then,
according to Fizeaus results, the total velocity of light in the flowing fluid is:
v=
1
c
+ V (1 2 ) ,
n
n
(A3.1)
in total disagreement with classic physics, according to which we should more simply have:
v=
c
+V
n
Years later, STR has given a theorethical explanation of (A3.1). In fact, for the Theorem of Addition of Velocities given
by (A1.19), we can write that:
c
c
( +V) ( +V)
v = n
= n
V
Vc
(1 + 2 ) (1 + )
nc
nc
1
c
V2
V
c
c
( + V ) ( + V )(1 )
+ V (1 2 )
n
nc
nc = n
v = n
= n
V 2
V 2
V
1 ( )
(1 + )
1 ( )
nc
nc
nc
, but quantities
(1
V2
nc
V
) , and we have:
nc
V 2
)
nc
on
the denominator are both negligible (<<1) with respect to the other terms and can be neglected indeed, from which the
assertion:
v=
c
1
+ V (1 2 ) .
n
n
Source Aerial S
Receiving Aerial R
Fig. A3.5: Longitudinal Doppler Effect (example of a source S getting farther from R with speed V ()).
The source aerial sends electromagnetic signals to the receiving one, and the periods is TS;
Because of the time dilation, the receiving aerial will receive them with a period TS , so that:
T 'S =
TS
(1 2 )
VT ' S V
T ' S =
=
c
c
TS
TS
T 'S among
(1 )
(1 2 )
TS
TS
TS
TS
TR = T 'S + T 'S =
+
=
(1 + ) =
(1 + ) =
(1 ) (1 + )
(1 2 )
(1 2 )
(1 2 )
=
TS
(1 + ) = TS
(1 )
(1 + )
= TR
(1 )
TR = TS
(1 + )
(1 )
(A3.2)
The same holds if the receiver is the one who gets farther. If, then, S and R are getting closer, through the same
reasonings which led us so far, the following holds:
TR = TS
(1 )
(1 + )
(A3.3)
V2
9c 2
=
)
50
min
(
1
) =40min
c2
25c 2
(=2400 heartbeats)
Moreover, under a Doppler analysis of the phenomenon, we can say that for equation (A3.2), the twin on the Earth (old)
transmits his heartbeats every second, but the flying twin will receive them, during the first to step of the flight, every
two seconds; in fact:
(1 + )
1 + (3 / 5)
= 1s
= 2 s , so, in the to step, the flying twin, whose to flight time is
(1 )
1 (3 / 5)
20 min=1200s=1200 heartbeats, has received one heartbeat every 2s from his brother on the Earth, that is just 600
heartbeats.
Therefore, the flying twin, during his 20 min(=1200s) to flight, has counted on himself 1200 heartbeats, but has
received only 600 from his brother on the Earth.
After 20 min of the flying twin, the direction of the flight is inverted and the return to the Earth starts, for another 20
min (still according to the time measured by the flying twin). During those further 20 mins return flight (from), on the
contrary, the twin on the Earth still transmits every second, but the flying one now receives every half a second; in fact,
for equation (A3.3):
(1 )
1 (3 / 5)
= 1s
= 0,5s , so, during those further flyers 20 min=1200s=
(1 + )
1 + (3 / 5)
=1200 heartbeats counted on himself, the flyer receives 2400 heartbeats from his brother on the Earth.
Therefore, the flying twin, during his further 20 min(=1200s) return flight, has obviously counted on himself another
1200 hearthbeats and has received 2400 (!) from his brother from the Earth.
Sum up of the counts:
Totally, during the whole space flight, of 20+20=40 min, the flying twin has obviously counted 1200+1200=2400
hearthbeats on himself and (a piece of!) 600+2400=3000 hearthbeats from his twin brother on the Earth.
He must feel younger!!!
S semireflective mirror
S1, S2 - mirrors
S1
r1
L Light source
S2
S
r2
S2
S1
V t2
2
c+V
l1
S
S
c-V
l2
c
c2 V 2
c2 V 2
t1 =
l1
l
2l
1
+ 1 = 1
c +V c V
c (1 V 2 c 2 )
t2 =
2l2
c V
2
2l2
c
1
(1 V 2 c 2 )
If you make both rays enter an interferometer to make them interfere, indeed, they should arrive with a t:
2
2
l2
l1
t = t2 t1 = (
) [l2 (1 + V 2 2c 2 ) l1 (1 + V 2 c 2 )]
2
2
2
2
c (1 V c ) (1 V c )
c
V c 104 , V 2 c 2 108
as we have
(1 + x )k 1 + kx .
= 5,5 107 m and we
and
therefore, we can write the following proportion, which involves the phase difference between the two rays and the
path difference ct:
ct
=
2
, from which:
2ct
.
By fixing the one arm length and adjust the other arm one by a micrometric screw, you can make ct of the same size
of , so making the desired interference phenomenon.
Now, without bringing any change to the geometry of the device, rotate it of 90; the roles of l1 and l2 are so swapped
and well have:
2
2
l1
l2
) [l1 (1 + V 2 2c 2 ) l2 (1 + V 2 c 2 )]
t ' = t '2 t '1 = (
2
2
2
2
c
c (1 V c ) (1 V c )
and we should also have:
' ct ct ' l1 + l2 V 2
22m
=
=
=
=
10 8 0, 4 , that is, through the
2
2
2
c
5,5 10 7 m
rotation of the interferometer, you should see a shift of the fringes of interference of 0,4 times the distance between
two subsequent maxima.
In reality, none of all that was observed, despite the accuracy of the devices was as good as to detect a
= 0,01 !
2
Michelson declared himself to be disappointed by that experiment, as he couldnt prove the movement of the Earth
through the ether.
The question was solved in 1905 by an employee of the Patent Office of Berne, Albert Einstein, who suggested to cease
searching for a proof of the movement of the Earth through the ether, for the simple reason that the ether is not
existing!
I add that the nowadays dark matter will soon end up like it.
App.1-Chapter 4: Relativistic Electrodynamics.
App.1-Par. 4.1: Magnetic force is simply a Coulombs electric force(!).
Concerning this, lets examine the following situation, where we have a wire, of course made of positive nuclei and
electrons, and also a cathode ray (of electrons) flowing parallel to the wire:
Cathode ray
e
F
e
Wire
e-
e-
e-
e-
e-
e-
e-
e-
e-
e-
p+
p+
p+
p+
p+
p+
p+
p+
p+
p+
Fig. A4.1: Wire not flown by any current, seen from the cathode ray steady ref. system I (x, y, z).
We know from magnetism that the cathode ray will not be bent towards the wire, as there isnt any current in it. This is
the interpretation of the phenomenon on a magnetic basis; on an electric basis, we can say that every single electron in
the ray is rejected away from the electrons in the wire, through a force F- identical to that F+ through which its attracted
from positive nuclei in the wire.
Now, lets examine the situation in which we have a current in the wire (e- with speed u)
Cathode ray
e
F
e-
ep+
p+
e-
z
-
Wire
ep+
p+
e-
p+
p+
p+
ep+
ep+
p+
Fig. A4.2: Wire flown by a current (with e- speed=u), seen from the cathode ray steady ref. system I (x, y, z).
In this case we know from magnetism that the cathode ray must bend towards the wire, as we are in the well known
case of parallel currents in the same direction, which must attract each other.
This is the interpretation of this phenomenon on a magnetic basis; on an electric basis, we can say that as the electrons
in the wire follow those in the ray, they will have a speed lower than that of the positive nuclei, in the system I, as such
nuclei are still in the wire. As a consequence of that, spaces among the electrons in the wire will undergo a lighter
relativistic Lorentz contraction, if compared to that of the nucleis, so there will be a lower negative charge density, if
compared to the positive one, so electrons in the ray will be electrically attracted by the wire.
This is the interpretation of the magnetic field on an electric basis. Now, although the speed of electrons in an electric
current is very low (centimeters per second), if compared to the relativistic speed of light, we must also acknowledge
that the electrons are billions and billions., so a small Lorentz contraction on so many spaces among charges, makes a
substantial magnetic force to appear.
But now lets see if mathematics can prove were quantitatively right on what asserted so far, by showing that the
magnetic force is an electric one itself, but seen on a relativistic basis.
On the basis of that, lets consider a simplified situation in which an electron e- , whose charge is q, moves with speed v
and parallel to a nuclei current whose charge is Q+ each (and speed u):
y
r
Q+
Q+
q-
F
Q+
Q+
Q+
Q+
d = d 0 1 u 2 c2
x
Fig. A4.3: Current of positive charge (speed u) and an electron whose speed is v, in the readers steady system I.
a) Evaluation of F on an electromagnetic basis, in the system I :
First of all, we remind ourselves of the fact that if we have N charges Q in line and d spaced (as per Fig. A4.3), then the
linear charge density will be:
= N Q N d = Q d
Now, still with reference to Fig. A3.3, in the system I, for the electromagnetics the electron will undergo the Lorentz
force
So:
Fl = q (
1
1 Q d
Q d0 1
uQ d
)=q
( 0 uv )
v0
2r
2r 0
0 2r
1 u 2 c2
(A4.1)
where the negative sign tells us the magnetic force is repulsive, in that case, because of the real directions of those
currents, and where the steady distance d0 is contracted to d, according to Lorentz, in the system I where charges Q
have got speed u ( d
= d0 1 u 2 c 2
).
F 'el = E 'q = (
1
1 Q d0
1 Q d'
1 '
)
) q = q(
)q = (
0 2r
0 2r
0 2r
1 u '2 c 2
(A4.2)
where u is the speed of the charge distribution Q in the system I, which is due to u and v by means of the well known
relativistic theorem of composition of speeds:
u ' = (u v) (1 uv c 2 )
(A4.3)
d ' = d 0 1 u '2 c 2
We now note that, through some algebraic calculations, the following equality holds (see (A4.3)):
1 u '2 c 2 =
(1 u 2 c 2 )(1 v 2 c 2 )
(1 uv c 2 ) 2
F 'el = E 'q = (
1 '
1 Q d'
1 Q d0
(1 uv c 2 )
)q = (
) q = q(
)
0 2r
0 2r
0 2r
1 u 2 c2 1 v 2 c2
(A4.4)
We now want to compare (4.1) with (4.4), but we still cannot, as one is about I and the other is about I; so, lets scale
F 'el
in (A4.4), to I, too, and in order to do that, we see that, by definition of the force itself, in I:
F (in _ I )
p I '
pI
= el
=
t I ' t I 1 v 2 c 2
1 v2 c2
, where
pI ' = pI ,
as
along the direction of the relative motion, so, according to the Lorentz transformations, it doesnt change, while
course, does. So:
1 Q d0
(1 uv c 2 )
)
1 v 2 c2
2
2
2
2
0 2r
1 u c 1 v c
t , of
1 Q d 0 (1 uv c 2 )
)
= Fel (in _ I )
0 2r
1 u 2 c2
(A4.5)
Now we can compare (4.1) with (A4.5), as now both are related to the I system.
Lets write them one over another:
Fl (in _ I ) = q (
1 Q d
uQ d
Q d0 1
1
v0
)=q
( 0 uv)
0 2r
2r
2r 0
1 u 2 c2
Fel (in _ I ) = q (
1 Q d 0 (1 uv c 2 )
Q d0 1
uv
1
)
=q
(
)
2
2
2
0 2r
2r 0 0 c
1 u c
1 u2 c2
Therefore we can state that these two equations are identical if the following identity holds:
c =1
00
, and this
identity is known since 1856. As these two equations are identical, the magnetic force has been traced back to the
Coulombs electric force, so the unification of electric and magnetic fields has been accomplished!!
0 =
dQ
dt0
dQ
dQ
=
= 0
d
1 2 dt0
Moreover, notice that the following equation holds; it shows the invariance of the electric charge:
0 dt0 = d
r
r
j = v .
So, we are led to define the current density 4-vector in the following way:
r
r
j = ( j , c) = (0 v , 0 c) ; note the similarity with the momentum-energy 4-vector:
r
r
p = ( p, mc) = (m0 v , m0 c) . Then, we have:
r2
2
j = j j42 = 02 c 2 and moreover, as we can apply the Lorentz Transformations to a 4-vector, as said at App.1-
j1 ' = j1 j4
j ' 2 = j2
j x ' = ( j x V )
j' y = j y
j '3 = j3
j ' z = jz
or also:
j '4 = j1 + j4
where
=V c
'= (
1
1 2
(A4.6)
V
jx )
c2
Now, in order to show by 4-vectors and in a more compact way what shown in App.1-Par. 4.2, we consider a wire flown
by a stationary current I in a reference system k and let I be directed along x; if, in such a system, we put a charge q
whose speed is v along x, well have a movement of q by the only field B, as E=0, because, on an average, we have in a
conductor as many positive charges as the negative ones are. On the contrary, if we place ourselves in a k reference
system which is moving with speed V=v with respect to k, in k q is at rest and theoretically the magnetic force should
disappear; but this is unacceptable for the Principle of Relativity (see the Introduction). An electric field must so appear
in k; in fact:
r
j = j + + j , j + = ( j+ , c + ) = (0, nqc ) [n]=[number of q involved/m3] and
r
r
j = ( j , c ) = ( nqv , nqc ) , the first term is negative as the direction of v is opposite to the conventional one
for I (as, here q<0) and the second one is still negative, as well, still because here, q<0.
For the Lorentz Transformations (A1.12) we so have (v=V):
j '+ x = nqV
'+ = nq
and as now
Aik = cibk
Through (A1.16) and (A1.17) we have seen how to express the Lorentz Transformations:
ci = il c'l
(i,m=1,2,3,4)
and
bk = kmb'm
(A4.7)
x'm
mk
xk
bi
b x 'm
x'
b'l
= i
=
( il b'l ) m = il mk
xk x'm xk
x'm
xk
x'm
bi = il b'l
x'm = mk xk
>>>
r
r
r
A
E =
and
t
r r r
B = A
(A4.8)
(A4.9)
r r 1 r r
(A4.10)
(A4.11)
1 2
= =
2
2
c t r
r 1 2 A
r
r
A 2 2 = j = A
c t
and
(A4.12)
(A4.13)
and we remind ourselves that we already defined the current density 4-vector j:
r
j = ( j , c ) = ( j x , j y , j z , c )
ji = vi ).
------------------
+
+
+
= ( +
)
k = jk and if we also define the four-divergence div4 = 4 =
x y x (ct )
(ct )
we easily get:
r
4 j = 0
r
4 = 0
Bx = B1 =
Az Ay 3 2
z
x2
x3
y
Ex = E1 =
Ax
= c( 4
)
x
t
x1
x4
cannot be espressed through two 4-vectors, but through a rank 2 four-tensor, as we proved the derivative of a vector is
a 2-tensor:
Fik = c(
k i
cBz
Fik =
cBy
E
x
way:
cBz
0
cBx
Ey
cBy
cBx
0
Ez
Ex
Ey
Ez
, and through (A4.7) we have proved that Fik transforms in the following
Fik = il km F 'lm .
(A4.14)
cB' z
F 'ik =
cB' y
E'
x
cB'z
0
cB'x
E'y
cB' y
cB'x
0
E'z
E'x
E'y
E 'z
If now we remind ourselves that on the right side of (A4.14) the summation over l and m is understood, as they are
repeated there, and if we develop such an equation, we get the transformation of the electromagnetic field:
{
{
{
{
Ex = E ' x
Bx = B'x
V
E 'z )
c2
V
Bz = ( B'z + 2 E ' y )
c
E y = ( E ' y +VB' z )
By = ( B' y
Ez = ( E 'z VB ' y )
E 'x = E x
B' x = Bx
V
Ez )
c2
V
B ' z = ( Bz 2 E y )
c
E ' y = ( E y VBz )
B ' y = ( By +
E ' z = ( Ez + VBy )
SUBAPPENDIXES:
Subapp. 1: Lorentz Transformations in succession.
k >>> V >>> k >>> W >>> k
We have three reference systems k, k and k and V and W are the relevant relative velocities.
Through the following terminology:
and
U
c
1 =
V
c
2 =
W
c
1 = 1 1 12
2 = 1 1 22
U=
V +W
VW
1+ 2
c
x = 1 ( x '+Vt ' )
with
with
1
x' )
c
t = 1 (t '+
and
and, by substitution:
x = 1 2 ( x ' '+Wt ' '+Vt ' '+ 1 2 x' ' ) = 1 2 [(1 + 1 2 ) x' '+ (V + W )t ' ' ] =
V +W
t' ') = x
1 + 1 2
1 V +W
t = 1 2 (1 + 1 2 )(t ' '+ 2
x' ' ) ;
c (1 + 1 2 )
(A.1.1)
= 1 2 (1 + 1 2 )( x ' '+
and similarly:
(A.1.2)
1 2 (1 + 1 2 ) = 1
=1
(1 12 )(1 22 ) (1 + 1 2 ) 2 = 1
[1 + 12 22 + 2 1 2 (12 + 22 + 2 1 2 )] (1 + 1 2 ) 2 =
2
1 [(1 + 2 ) (1 + 1 2 )] = 1 1 U 2 c 2 = , and so (A.1.1) and (A.1.2) can be rewritten like that:
t = (t ' '+
with
and U.
r r
r 2
r
2
and =
so:
E = E0 e i (t k r ) ; such a field propagates along r and we know that k =
T
r
r
T r
(A.2.1)
k = T , that is: k = = = k ;
c
r r
I = t k r is evidently an invariant, but it can also be expressed as the product of two 4-vectors (invariants):
r
r
(position 4-vector and wave 4-vector) I = r ( r , ct ) k ( k , c) .
r
We know, now, that for (A.2.1), k =
and lets take a light wave propagating in a system k(V) over the plane x, y
c
r
and forming an angle with x; the components of k ' will be:
k '1 = k ' cos ' = ( ' c ) cos ' , k '2 = k ' sin ' = ( ' c) sin ' , k '3 = 0 and k '4 = ( ' c) = k ' .
k3 = k '3
and
k4 = (k '4 + k '1 ) ; now, as also k3=0, in the system k, too, the ray
k = ( cos , sin ,0, ) ; now, we calculate and : on this purpose, from the transformation of k4 , we have:
c
c
c
'
'
= ( + cos ' ) , or:
c
c
c
(1 + cos ' )
= '
= ' (1 + cos ' )
(A.2.2)
(1 2 )
'
'
while from the transformation of k1 , we have:
cos = ( cos '+ ) and if we consider (A.2.2), we have:
c
c
c
'
(cos '+ )
cos = (cos '+ ) =
(A.2.3)
(1 + cos ' )
(1 2 )
sin '
'
sin = sin ' =
sin ' =
(1 + cos ' )
(1 + cos ' )
sin
and from (A.2.3) and (A.2.4) we also have: sin ' =
(1 cos )
(A.2.4)
, which is, then, (A.2.4) with and swapped
and with (-) in place of ; all this, for the relativity of the movement.
-----------------------Now, suppose a source is at rest in a system k(); then, from (A.2.3) we have:
cos ' =
(cos )
(1 cos )
(useful to get immediately, from ) (its the (A.2.3) with and swapped and with (-) in
(1 2 )
(1 + cos ' ) =
1 cos
= '
(1 2 )
1 cos
(A.2.5)
' . Therefore, if in the system k you see the radiation under an angle
= , this means that the radiation comes from right, from the system k which is getting farther along the x axis, and
cos = cos = 1 and from (A.2.5)
(1 )
with the source getting farther ( = ), we have: = '
(A.2.6)
(1 + )
so we can talk about a Longitudinal Doppler Effect (Par. 3.5) and, in this case,
T = T'
>>>
= '
, whilst, when the system k getting closer (=0 >>> cos =1), we have:
(1 + )
(1 )
T = T'
>>>
(1 + )
(1 )
(1 )
(1 + )
(A.2.7)
'
=
= m ; this
'
'
= 2 and = c ).
' (1 )
and
' (1 + )
so:
formula is very used in astrophysics and cosmology for the red shift (remember that
In order to go from the case of the moving emitter to that of the moving observer and vice versa, you just swap with
(V with V) and with . In any case, when there is an approaching (or a getting farther) situation, formulae for
the Longitudinal Relativistic Doppler Effect are the same, no matter who is approaching.
If, on the contraty, system k sees the radiation coming under
= 2,
TRANSVERSAL Relativistic Doppler Effect; in this case you dont have either a getting farther or an approaching
situation, but the only Doppler kind effect is just due to the time dilation; in fact, also from (A.2.5), with
have:
= ' (1 2 )
' (1
)
2
= 2 , we
effect, with respect to the longitudinal one). Such an effect was first observed by Ives in 1938 and this plainly proved
the theory. Moreover, the diversity between and also confirms the phenomenon of the light ABERRATION, according
to which, if you are moving, you see light coming to you under a different angle, something like when you are driving a
car in a rainy day and you see the rain falling askew on the windscreen. And from (A.2.3) and (A.2.4), we have:
tg =
sin ' (1 2 )
(cos '+ )
v=(
r
dx1 dx2 dx3 dx4
dx
dx
dx
dx
,
,
,
) = ( 1 , 2 , 3 , 4 ) = (v x , v y , vz , c) = (v , c) = (u1 , u 2 , u3 , u 4 )
d d d d
dt
dt
dt
dt
u '3 = u3 , u ' 4 = (u 4 u1 ) ;
now, you can see that is defined by the V of the moving system 0 (and =V/c), while is referred to the velocity v
had by a particle in 0, and ' is to v had by a particle in 0. Now, by replacing the u by the relevant values:
' v 'x = (vx V ) , ' v ' y = v y , ' v' z = v z , ' c = (c v x ) ;
By applying the Lorentz T. , we have:
1
=
' (1 V v )
x
c2
v' x =
( v x V ) , v' y = v y
'
'
v' z =
vz
'
(A.3.1)
For the case of the inverse transformations, in place of the (A.3.1), well have:
It follows from (A.3.1) that if the particle is at rest in 0 (v=0 >>
= 1 ), then
V
= (1 + 2 v x ) .
c
'
' = , from which v=-V , that is, in 0
F '1 = ( F1 F4 ) , F '2 = F2
F=
F '3 = F3
r r r
= (f , ( f v )) = ( F1 , F2 , F3 , F4 ) .
d
c
F '4 = ( F4 F1 ) .
dp
If now we introduce in such equations the components of the Minkowski Force, we have:
r r
r r
r r
( f v )) , ' f ' y = f y , ' f ' z = f z , ' ( f 'v ' ) = ( ( f v ) Vf x ) , from which:
c
r r
r r
r r
' f ' x = (f x
becomes:
f 'x =
r r
( f v ))
c
V
1 2 vx
c
( fx
f 1 2
f 'y = y
V
1 2 vx
c
f 1 2
f 'z = z
V
1 2 vx
c
r r
r r
( f v ) Vf x
( f 'v ' ) =
V
1 2 vx
c
a=
d2x
d 2 x1 d 2 x2 d 2 x3 d 2 x4
dv
=
= (a1 , a2 , a3 , a 4 )
(
,
,
,
)=
2
2
2
2
2
d
d
d
d
d
d
= 1,2,3 )
d
dt
d
dv
v&
v (vv&)
a = (v )
= v
+ 2 = 2 + 2 2 2
dt
d
dt
dt 1
c (1 )
, as:
& =
3
1
d d
3
& = vv& . About a4 :
= (
)
=
dt dt (1 2 )
c2
a4 =
d
dt
d c d 2
(vv&)
(c)
= c
=
= c 4 & =
dt
d
dt 2 dt
c (1 2 ) 2
a = (
and so:
d
c d 2
(vv&)
(v ),
) = ( 2 v& + 4 &v,
)
dt
2 dt
(1 2 ) 2 ; notice that in the system where the particle is at rest, (v=0,
=0) we have:
a = v& 2 > 0
and, as
is
space-type.
In order to get the transformation equations for the acceleration, know that:
dv
dv'
and v&'=
; moreover, vx = vx (t ) and v' x = v 'x (t ' ) (consistently). Then, lets name:
dt
dt
v
v'
x = x and 'x = x ; so, we get from (A1.18) that:
c
c
dv' x
dv '
1 ( 'y
'x )
1 ( 'z x ' x )
dv y
dv ' y
dvx
1
dvz
dv' z
= 2
,
=
=
and
2
2
dv' x (1 + ' x )
dv' z
(1 + 'x )2
dv' y
(1 + ' x )
v& =
if now we divide these equations by the following well known equation (of the Lorentz T.) dt = ( dt '+ dx' ) , we
c
dvx =
dv ' x
(1 + ' x ) 2
2
dv y =
and
dvz =
have:
ax =
1
a 'x
3
(1 + 'x )3
ay =
and
az =
which are the equations for the transformation of the accelerations, indeed.
At last, we notice those equations have got the velocity inside; therefore, if the three-dimension acceleration is constant,
in an inertial reference system, it will change with time in all others!
Page 26
-App. 2-Chapter 1: A new Universe, 100 times bigger, more massive and older.
App. 2-Par. 1.1: No dark matter!
App. 2-Par. 1.2: Cosmic acceleration aUniv.
App. 2-Par. 1.3: The new density of the Universe.
App. 2-Par. 1.4: Further considerations on the meaning of aUniv.
App. 2-Par. 1.5: Further confirmations and encouragements from other branches of physics.
App. 2-Par. 1.6: On discrepancies between calculated and observed rotation speeds of galaxies.
Page 26
Page 26
Page 27
Page 28
Page 29
Page 29
Page 31
Page 32
Page 32
Page 33
Page 34
Page 35
Page 35
RUniv = N re
RUniv = N re
(!).
Page 38
Page 39
Page 39
Page 39
Page 40
-App. 2-SUBAPPENDIXES.
App. 2-Subappendix 1: Physical constants.
Page 42
Page 42
Page 40
Page 41
App. 2-Chapter 1: A new Universe, 100 times bigger, more massive and older.
App. 2-Par. 1.1: No dark matter!
ON DISCREPANCIES BETWEEN CALCULATED AND OBSERVED DENSITIES Univ :
The search for 99% of matter in the Universe, after that it has been held invisible sounds somewhat strange. And its a
lot of matter, as dark matter should be much more than the visible one (from 10 to 100 times more).
Astrophysicists measure a value of visible Universe which is around:
2 1030 kg / m 3 .
Prevailing cosmology nowadays gives the following value of : (see also (A1.6)):
4
2
Wrong = H local
/( G ) 2 10 26 kg / m3
3
(too high!) .
(A1.1)
Lets use the following plausible value for Hlocal (local Hubbles constant see (A1.7) below):
m
H local 75km /( s Mpc) 2,338 1018 [( ) m]
s
(A1.2)
confirmed by many measurements on Coma cluster, for instance, (see (A1.7) below) and this also confirms that the
farthest objects ever observed are travelling away with a speed close to that of light:
, from which:
(A1.3)
Moreover, one can easily calculate the speed of a gravitating mass m at the edge of the visible Universe, by the
following equality between centrifugal and gravitational forces:
ma = m
c2
RUniv Old
2
= G m M Univ Old / RUniv
Old
(A1.4)
(A1.5)
and so:
4
4
4 3
c 3
3
2
) ] = H local
/( G ) 2 10 26 kg / m3
Wrong = M Univ Old /( RUniv
Old ) = (c GH local ) [ (
3
3 H local
3
(A1.6)
2 1030 kg / m 3 .
Lets try to understand which arbitrary choices, through decades, led to this discrepancy. From Hubbles observations on,
we understood far galaxies and clusters got farther with speeds determined by measurements of the red shift. Not only;
the farthest ones have got higher speeds and it quite rightly seems theres a law between the distance from us of such
objects and the speeds by which they get farther from us.
Fig. A1.1 below is a picture of the Coma cluster, about which hundreds of measurements are available; well, we know
the following data about it:
distance x=100 Mpc = 3,26 108 l.y. = 3,09 1024 m
speed v=6870 km/s=6,87 106 m/s.
m
H local = v x 2,22 10 18 [( ) m] ,
s
(A1.7)
Universe of 13,5 10 l.y. radius and ~c speed, instead of data on Coma cluster. By the same reasonings which led us so
far to get the Hlocal constant definition, we can also state that if galaxies increase their own speeds with going farther,
then they are accelerating with an acceleration we call aUniv , and, from physics, we know that:
x =
1
1
1
a t 2 = (a t ) t = v t
2
2
2
, from which:
t =
aUniv =
v
v
( v ) 2
=
=
= aUniv 7,62 1012 m / s 2 ,
x
2
t
2 x
v
2 x
v
(A1.8)
but, in this case, we have to accept to deal with living in a Universe whose radius is 100 times the 13,5 10 l.y.
supported nowadays, and whose mass is much higher than 1,67 1053 kg, calculated at page 157, still supported
nowadays and considered as the mass of the whole Universe, and not of that visible to us (see below).
Lets Disentangle the Question:
Well then, lets start from the discovery represented by (A1.8), according to which we are accelerating, and from (A1.4),
according to which:
aUniv =
c2
RUniv New
RUniv New
c2
=
1,17908 10 28 m .
aUniv
(A1.9)
This value is 100 times the one previously calculated in (A1.3) and it should represent the radius between the center of
mass of the Universe and the place where we are now, place in which the speed of light is c.
((as we are not exactly on the edge of such a Universe, we can demonstrate the whole radius is larger by a factor
that is RUniv=1,667 1028m.))
2,
Anyway, we are dealing with linear dimensions 100 times those supported in the prevailing cosmology nowadays. We
can say that there is invisible matter, but it is beyond the range of our largest telescopes and not inside galaxies or
among them; the dark matter should upset laws of gravitations, but they hold very well.
Again, from (A1.4) we have:
2
m aUniv = G m M Univ New / RUniv
New
, so:
2
55
M Univ New = aUniv RUniv
New / G = 1,59486 10 kg
(A1.10)
This value, again, is a hundred times that of nowadays cosmology, in (A1.5) and it represents the mass within the radius
RUniv-New , while the one within the whole RUniv-Tot is unknown.
From (A1.9) and (A1.10) we also get:
c2 =
GM Univ
RUniv
(~Eddington).
(A1.11)
4
3
30
= M Univ New /( RUniv
kg / m3 !!!
New ) = 2.32273 10
3
very very close to that observed and measured by astrophysicists and already reported at page 158.
(A1.12)
Nature fortunately sends encouraging and convincing signs on the pursuit of a way, when confirmations on what one
has understood are coming from branches of physics very far from that in which one is investigating.
On the basis of that, lets remind ourselves of the classic radius of an electron (stable and base particle in our
Universe!), which is defined by the equality of its energy E=mec2 ant its electrostatic one, imagined on its surface ( in a
classic sense):
me c 2 =
re =
1 e2
4 0 re
, so:
e2
1
2,8179 1015 m
2
4 0 me c
(A1.13)
Now, still in a classic sense, if we imagine, for instance, to figure out the gravitational acceleration on an electron, as if it
were a small planet, we must easily conclude that:
ge = G
mx ge = G
mx me
re2
, so:
3 4
me
2 2 Gme c
=
8
(A1.14)
that is the very value obtained in (A1.8) through different reasonings, macroscopic, and not microscopic, as it was for
(A1.14). All in all, why should gravitational behaviours of the Universe and of electrons (making it) be different?
App. 2-Par. 1.4: Further considerations on the meaning of aUniv.
Well, we have to admit that if matter shows mutual attraction as gravitation, then we are in a harmonic and oscillating
Universe in contraction towards a common point, that is the center of mass of all the Universe. As a matter of fact, the
acceleration towards the center of mass of the Universe and the gravitational attractive properties are two faces of the
same medal. Moreover, all the matter around us shows it want to collapse: if I have a pen in my hand and I leave it, it
drops, so showing me it wants to collapse; then, the Moon wants to collapse into the Earth, the Earth wants to collapse
into the Sun, the Sun into the centre of the Milky Way, the Milky Way into the centre of the cluster and so on; therefore,
all the Universe is collapsing. Isnt it?
So why do we see far matter around us getting farther and not closer? Easy. If three parachutists jump in succession
from a certain altitude, all of them are falling towards the center of the Earth, where they would ideally meet, but if
parachutist n. 2, that is the middle one, looks ahead, he sees n. 1 getting farther, as he jumped earlier and so he has a
higher speed, and if he looks back at n. 3, he still sees him getting farther as n. 2, who is making observations, jumped
before n. 3 and so he has a higher speed. Therefore, although all the three are accelerating towards a common point,
they see each other getting farther. Hubble was somehow like parachutist n. 2 who is making observations here, but he
didnt realize of the background acceleration g (aUniv).
At last, I remind you of the fact that recent measurements on Ia type supernovae in far galaxies, used as standard
candles, have shown an accelerating Universe; this fact is against the theory of our supposed current post Big Bang
expansion, as, after that an explosion has ceased its effect, chips spread out in expansion, ok, but they must obviously
do that without accelerating.
235
238
Moreover, on abundances of U
and U
we see now (trans-CNO elements created during the explosion of the
primary supernova, we see that (maybe) the Earth and the solar system are just (approximately) five or six billion years
old, but all this is not against all what just said on the real age of the Universe, as there could have been sub-cycles
from which galaxies and solar systems originated, whose duration is likely less than the age of the whole Universe.
About TUniv of the Universe, we know from physics that: v=R and
= 2 / T , and, for the whole Universe:
c=RUniv and
= 2 / TUniv
, from which:
2RUniv
(7.840 billion years)
(A1.15)
= 2,47118 10 20 s
c
20
About the angular frequency: Univ c / RUniverso New = 2,54 10 rad / s , and it is a right parameter for a
reinterpretation of the global Hubbles constant H global , whose value is H local only in the portion of Universe visible by
TUniv =
us ( Univ
= H Global ).
App. 2-Par. 1.5: Further confirmations and encouragements from other branches of physics.
1) Stephan-Boltzmanns law:
= T 4 [W/m2],
where
= 5,67 108 W (m 2 K 4 )
Its very interesting to notice that if we imagine an electron (stable and base particle in our Universe!) irradiating all
energy its made of in time TUniv , we get a power which is exactly of Plancks constants, expressed in watt!
In fact:
Le =
me c 2 1
= hW = 3,316 10 34 W
TUniv 2
(One must not be surprised by the coefficient ; in fact, at fundamental energy levels, its always present, such as, for
instance, on the first orbit of the hydrogen atom, where the circumference of the orbit of the electron (2r) really is
1
DeBroglie of the electron. The photon, too, can be represented as if it were contained in a small cube whose side is
2
1
).
photon
2) Moreover, we notice that an electron and the Universe have got the same luminosity-mass ratio:
in fact,
LUniv
M Univ
LUniv =
M Univc 2
= 5,80 1051W
TUniv
mec 2
M Univc 2
1
hW
2
2
c
c
L
T
T
= Univ =
= e = Univ =
=2
me
TUniv
me
M Univ
TUniv me
consider that both an electron and the Universe have got the same temperature, the cosmic microwave background
one:
1
h 1
1
1
1
L
L
L
L
4
Univ
e
2
4
4
4
= T , so: T = (
) =(
) =(
) =(
) 4 = 2,73K
2
2
2
4R 2
4R 2
4RUniv
4re
4re
!!!
And all this is no more true if we use data from the prevailing cosmology!
3) The Heisenberg Uncertainty Principle as a consequence of the essence of the macroscopic and
Universe:
according to this principle, the product x p must keep above
maximum, p must be at a minimum, and vice versa:
p x h / 2
Now, as
xmin
pmax
and
pmax xmin = h / 2
(h
= h / 2
h/ 2,
aUniv
accelerating
we take, for the electron (stable and base particle in our Universe!),
pmax = (me c )
and as
for the electron, as it is a harmonic of the Universe in which it is (just like a sound can be considered as made of
xmin = aUniv (2 )2 ,
2
2
RUniv = aUniv Univ
, as we know from physics that a = R , and then
e of the electron (which is a harmonic of the Universe) we therefore take the
like if the electron of the electron-positron pairs can make oscillations similar to those of the
Universe, but through a speed-amplitude ratio which is not the (global) Hubble Constant, but through HGlobal divided by
2
Univ , and so, if for the whole Universe: RUniv = aUniv Univ
, then, for the electron:
a
aUniv
aUniv
a
xmin = Univ2 =
=
= Univ2 , from which:
2
2
(e )
( Univ Univ )
( H Global Univ )
(2 )
a
pmax xmin = mec Univ2 = 0,527 1034 [Js] and such a number ( 0,527 10 34 Js), as chance would have it, is
(2 )
really h / 2 !!
4) As we previously did, lets remind ourselves of the classic radius of an electron (stable and base particle in our
Universe!), which is defined by the equality of its energy E=mec2 ant its electrostatic one, imagined on its surface ( in a
classic sense):
me c 2 =
re =
1 e2
4 0 re
, so:
e2
1
2,8179 1015 m
2
4 0 me c
Now, still in a classic sense, if we imagine, for instance, to figure out the gravitational acceleration on an electron, as if it
were a small planet, we must easily conclude that:
ge = G
mx ge = G
mx me
re2
, so:
3 4
me
2 2 Gme c
=
8
5) We know that
1
TUniv
1
137
is the value of the Fine structure Constant and the following formula
1
Gme2
=
h Univ
137
re
yields
, where,
(see (A1.15)) !!
6) If I suppose, out of simplicity, that the Universe is made of just harmonics, as electrons
their number will be:
Gme2
h
re
N=
(and/or positrons
M Univ
1,75 1085 (~Eddington); the square root of such a number is:
me
e + ),
N 4,13 1042
(~Weyl).
Now, we are surprised to notice that
( RUniv
N re 1,18 10 28 m
RUniv
= N re 1,18 10 28 m ) !!!
---------------------------------------------
App. 2-Par. 1.6: On discrepancies between calculated and observed rotation speeds of galaxies.
mstar
v2
m M
= G star 2 Gal
RGal
RGal
, from which:
v=
GM Gal
RGal
On the contrary, if we also consider the tidal contribution due to aUniv , i.e. the one due to all the Universe around, we
get:
v=
GM Gal
+ aUniv RGal
RGal
; lets figure out, for instance, in M31, how many RGal (how many k times) far away from
the center of the galaxy the contribution from aUniv can save us from supposing the existence of dark matter:
GM + Dark
GM Gal
=
+ aUniv kRGal
kRGal
kRGal
, so:
G (M + Dark M Gal )
4,
2
aUniv RGal
k=
existence of aUniv makes us obtain the same high speeds observed, without any dark matter. Moreover, at 4R Gal far
away, the contribution due to aUniv is dominant.
At last, we notice that aUniv has no significant effect on objects as small as the solar system; in fact:
M Sun
REarth Sun
All these considerations on the link between aUniv and the rotation speed of galaxies are widely open to further
speculations and the equation through which one can take into account the tidal effects of
aUniv
have a somewhat different and more difficult look, with respect to the above one, but the fact that practically all galaxies
have dimensions in a somewhat narrow range (3 4 RMilky Way or not so much more) doesnt seem to be like that just by
chance, and, in any case, none of them have radii as big as tents or hundreds of R Milky Way , but rather by just some
times. In fact, the part due to the cosmic acceleration, by zeroing the centripetal acceleration in some phases of the
revolution of galaxies, would fringe the galaxies themselves, and, for instance, in M31, it equals the gravitational part at
a radius equal to:
GM M 31
= aUniv RGal Max
RGal Max
, from which:
RGal Max =
GM M 31
2,5RM 31 ; in fact, maximum radii ever observed in
aUniv
re
in (A1.13):
1 e2
= mec 2
4 0 re
c2 =
GM Univ
RUniv
(~Eddington), we get:
1 e 2 GM Univ me
=
4 0 re
RUniv
!!
(A2.1)
As an alternative, we know that the Fine structure Constant is 1 divided by 137 and its given by the following equation:
1 2
e
1
4 0
=
=
h
137
c
2
1
137
Gme2
E
1
r
1
=
= e = Box _ Min , where Univ =
. E Box _ Min is the smallest box of energy in the Universe (the
TUniv
137 h Univ EEmanable
electron), while E Emanable is the smallest emanable energy, as Univ is the smallest frequency.
Besides, is also given by the speed of an electron in a hydrogen atom and the speed of light ratio:
= ve _ in _ H c = e 2 2 0 hc , or also as the ratio between Compton wavelenght of the electron (which is the
minimum of e- when its free and has the speed of light c) and the wavelength of e- indeed, on the first orbit of H:
, where
So, we could set the following equation and deduce the relevant consequences (Rubino):
1 2
Gme2
e
1
4 0
r
)=
( =
= e
h
137
h Univ
c
2
, from which:
Gme2
1 2
c Gme2
c Gme2
e =
=
= RUniv
re
4 0
2Univ re
H global re
Gme2
1 e2
=
re
4 0 RUniv
and
, we could write:
M Univ = N me
or also:
GM Univ me
1 e2
=
4 0 RUniv
N N re
, from which:
1
e2
GM Univ me
=
4 0 ( RUniv N )
N re
RUniv = N re
(A2.2)
re = RUniv
, then (A2.2)
becomes:
1 e 2 GM Univ me
=
4 0 re
RUniv
!!
RUniv = N re
(A1.10), we have:
N=
M Univ
1,75 1085 (~Eddington), from which:
me
N 4,13 1042
(~Weyl) and
App. 2-Par. 2.2: The discovery of the common essence of gravity and electromagnetism.
Now, (A2.1) is of a paramount importance and has got a very clear meaning (Rubino) as it tells us that the electrostatic
energy of an electron in an electron-positron pair ( e
by the whole Universe
M Univ
at an
RUniv
M Univ
TUniv
time, through a collision, for instance, and so through an oscillation of the e e pair - spring, it must transfer a so huge
gravitational energy indeed, stored in billion of years that if this energy were to be due just to the gravitational potential
energy of the so small mass of the electron itself, it should fall short by many orders of size. Therefore, the effect due to
the immediate release of a big stored energy, by
e , which is known to be
GM Univ me
RUniv
in the very moment, and in a narrow range ( re ), to be able to release energies coming from forces stronger than the
gravitational one, or like if it were able to exert a special gravitational force, through a special Gravitational Universal
Constant G, much bigger than G:
mm
e e me me
1
)
= G ' e e
re
re
4 0 me me
; its only that during the sudden release of energy by the electron, there is a
run taking effect due to its eternal free (gravitational) falling in the Universe. And, at the same time, gravitation is an
effect coming from the composition of many small electric forces.
I also remark here, that the energy represented by (A2.1), as chance would have it, is really
me c 2
run taking kinetic energy, had by the free falling electron-positron pair , and that Einstein assigned to the rest matter,
unfortunately without telling us that such a matter is never at rest with respect to the center of mass of the Universe,
as we all are inexorably free falling, even though we see one another at rest; from which is its essence of gravitationally
originated kinetic energy
mec 2 =
mec 2 :
1 e 2 GM Univ me
=
4 0 re
RUniv
App. 2-Par. 2.3: The oscillatory essence of the whole Universe and of its particles.
Were talking about oscillations as this is the way the energy is transferred, and also in collisions, such as those among
billiards balls, where there do are oscillations in the contact point, and how, even though we cannot directly see them
(those of peripheral electrons, of molecules, of atoms etc, in the contact point).
So, were properly talking about oscillations also because, for instance, a Sun/planet system or a single hydrogen atom,
+
or a e e pair, which are ruled by laws of electromagnetism, behave as real springs: in fact, in polar coordinates, for an
electron orbiting around a proton, there is a balancing between the electrostatic attraction and the centrifugal force:
Fr =
1 e2
d 2
1 e2
p2
+
m
(
)
r
=
+
e
4 0 r 2
dt
4 0 r 2 me r 3
, where
d
=
dt
and
p = me v r = merr = mer 2
Lets figure out the corresponding energy by integrating such a force over the space:
U = Fr dr =
1 e2
p2
+
4 0 r
2me r 2
(A2.3)
U
U
p2
2me r 2
U Parab = k (r r0 )2 + U 0
r0
Uo
U 0 = (
1 2 me e 4
)
4 0 2 p 2
1 e2
4 0 r
Fig. A2.1: Graph of the energy.
The point of minimum in (r0,U0) is a balance and stability point (Fr=0) and can be calculated by zeroing the first
derivative of (A2.3) (i.e. setting Fr=0 indeed).
Moreover, around r0, the curve for U is visibly replaceable by a parabola UParab, so, in that neighbourhood, we can write:
U Parab = k (r r0 )2 + U 0
Fr = U Parab r = 2k (r r0 )
= kx
- Hookes Law).
Moreover, the gravitational law which is followed by the Universe is a force which changes with the square value of the
distance, just like the electric one, so the gravitational force, too, leads to the Hookes law for the Universe.
--------------------------------------------By means of (A2.1) and of its interpretation, we have turned the essence of the electric force into that of the
gravitational one; now we do the same between the electric and magnetic force, so accomplishing the unification of
electromagnetic and gravitational fields. At last, all these fields are traced back to aUniv , as gravitation does.
App. 2-Chapter 3: The unification of magnetic and electric forces.
App. 6-Par. 3.1: Magnetic force is simply a Coulombs electric force(!).
Concerning this, lets examine the following situation, where we have a wire, of course made of positive nuclei and
electrons, and also a cathode ray (of electrons) flowing parallel to the wire:
Cathode ray
e
F
e
Wire
e-
e-
e-
e-
e-
e-
e-
e-
e-
e-
p+
p+
p+
p+
p+
p+
p+
p+
p+
p+
Fig. A3.1: Wire not flown by any current, seen from the cathode ray steady ref. system I (x, y, z).
We know from magnetism that the cathode ray will not be bent towards the wire, as there isnt any current in it. This is
the interpretation of the phenomenon on a magnetic basis; on an electric basis, we can say that every single electron in
the ray is rejected away from the electrons in the wire, through a force F- identical to that F+ through which its attracted
from positive nuclei in the wire.
Now, lets examine the situation in which we have a current in the wire (e- with speed u)
Cathode ray
e-
e-
e-
e-
F
e-
ep+
p+
e-
z
-
Wire
ep+
p+
e-
p+
p+
p+
ep+
ep+
p+
Fig. A3.2: Wire flown by a current (with e- speed=u), seen from the cathode ray steady ref. system I (x, y, z).
In this case we know from magnetism that the cathode ray must bend towards the wire, as we are in the well known
case of parallel currents in the same direction, which must attract each other.
This is the interpretation of this phenomenon on a magnetic basis; on an electric basis, we can say that as the electrons
in the wire follow those in the ray, they will have a speed lower than that of the positive nuclei, in the system I, as such
nuclei are still in the wire. As a consequence of that, spaces among the electrons in the wire will undergo a lighter
relativistic Lorentz contraction, if compared to that of the nucleis, so there will be a lower negative charge density, if
compared to the positive one, so electrons in the ray will be electrically attracted by the wire.
This is the interpretation of the magnetic field on an electric basis. Now, although the speed of electrons in an electric
current is very low (centimeters per second), if compared to the relativistic speed of light, we must also acknowledge
that the electrons are billions and billions., so a small Lorentz contraction on so many spaces among charges, makes a
substantial magnetic force to appear.
But now lets see if mathematics can prove were quantitatively right on what asserted so far, by showing that the
magnetic force is an electric one itself, but seen on a relativistic basis.
On the basis of that, lets consider a simplified situation in which an electron e- , whose charge is q, moves with speed v
and parallel to a nuclei current whose charge is Q+ each (and speed u):
y
r
Q+
Q+
q-
F
Q+
Q+
Q+
Q+
d = d 0 1 u 2 c2
x
Fig. A3.3: Current of positive charge (speed u) and an electron whose speed is v, in the readers steady system I.
a) Evaluation of F on an electromagnetic basis, in the system I :
First of all, we remind ourselves of the fact that if we have N charges Q in line and d spaced (as per Fig. A3.3), then the
linear charge density will be:
= N Q N d = Q d
Now, still with reference to Fig. A3.3, in the system I, for the electromagnetics the electron will undergo the Lorentz
force
Fmagn = 0
So:
Fl = q (
I
Q t
Q (d u )
uQ d
= 0
= 0
= 0
2r
2r
2r
2r
1
1 Q d
Q d0 1
uQ d
)=q
( 0 uv )
v0
2r
2r 0
0 2r
1 u 2 c2
(A3.1)
where the negative sign tells us the magnetic force is repulsive, in that case, because of the real directions of those
currents, and where the steady distance d0 is contracted to d, according to Lorentz, in the system I where charges Q
have got speed u ( d
= d0 1 u 2 c 2
).
F 'el = E 'q = (
1
1 Q d0
1 Q d'
1 '
)
) q = q(
)q = (
0 2r
0 2r
0 2r
1 u '2 c 2
(A3.2)
where u is the speed of the charge distribution Q in the system I, which is due to u and v by means of the well known
relativistic theorem of composition of speeds:
u ' = (u v) (1 uv c 2 )
(A3.3)
d ' = d 0 1 u '2 c 2
We now note that, through some algebraic calculations, the following equality holds (see (A3.3)):
1 u '2 c 2 =
(1 u 2 c 2 )(1 v 2 c 2 )
(1 uv c 2 ) 2
F 'el = E 'q = (
1 '
1 Q d'
1 Q d0
(1 uv c 2 )
)q = (
) q = q(
)
0 2r
0 2r
0 2r
1 u 2 c2 1 v 2 c2
(A3.4)
We now want to compare (A3.1) with (A3.4), but we still cannot, as one is about I and the other is about I; so, lets
scale
F 'el
in (A3.4), to I, too, and in order to do that, we see that, by definition of the force itself, in I:
p I '
pI
F (in _ I )
=
= el 2 2
2
2
t I ' t I 1 v c
1 v c
, where
pI ' = pI ,
as
along the direction of the relative motion, so, according to the Lorentz transformations, it doesnt change, while
course, does. So:
1 Q d0
(1 uv c 2 )
Fel (in _ I ) = F 'el (in _ I ' ) 1 v c = q (
)
1 v 2 c2
2
2
2
2
0 2r
1 u c 1 v c
2
= q(
1 Q d 0 (1 uv c 2 )
)
= Fel (in _ I )
0 2r
1 u 2 c2
Now we can compare (A3.1) with (A3.5), as now both are related to the I system.
Lets write them one over another:
Fl (in _ I ) = q (
1 Q d
uQ d
Q d0 1
1
v0
)=q
( 0 uv)
0 2r
2r
2r 0
1 u 2 c2
Fel (in _ I ) = q (
1 Q d 0 (1 uv c 2 )
Q d0 1
uv
1
)
=q
(
)
2
0 2r
2r 0 0 c
1 u 2 c2
1 u2 c2
t , of
(A3.5)
Therefore we can state that these two equations are identical if the following identity holds:
c =1
00
, and this
identity is known since 1856. As these two equations are identical, the magnetic force has been traced back to the
Coulombs electric force, so the unification of electric and magnetic fields has been accomplished!!
--------------------------------------------App. 2-Chapter 4: Justification of the equation
and gravitational forces (Rubino).
App. 2-Par. 4.1: The equation
RUniv = N re
RUniv = N re
(!).
numerically correct.
And its also justified on an oscillatory basis and now we see how; such an equation tells us the radius of the Universe is
equal to the classic radius of the electron multiplied by the square root of the number of electrons (and positrons) N in
which the Universe can be thought as made of. (We know that in reality almost all the matter in the Universe is not
made of e+e- pairs, but rather of p+e- pairs of hydrogen atoms H, but we are now interested in considering the Universe
as made of basic bricks, or in fundamental harmonics, if you like, and we know that electrons and positrons are basic
bricks, as they are stable, while the proton doesnt seem so, and then its neither a fundamental harmonic, and so nor a
basic brick).
Suppose that every pair e+e- (or, for the moment, also p+e- (H), if you like) is a small spring (this fact has been already
supported by reasonings made around (A2.3)), and that the Universe is a big oscillating spring (now contracting towards
its center of mass) with an oscillation amplitude obviously equal to RUniv , which is made of all microoscillations of e+epairs.
And, at last, we confirm that those micro springs are all randomly spread out in the Universe, as it must be; therefore,
one is oscillating to the right, another to the left, another one upwards and another downwards, and so on.
Moreover e+ and e- components of each pair are not fixed, so we will not consider N/2 pairs oscillating with an amplitude
2re, but N electrons/positrons oscillating with an amplitude re.
re
RUniv
Fig. A4.1: The Universe represented as a set of many (N) small springs, oscillating on random directions, or as a single
big oscillating spring.
Now, as those micro oscillations are randomly oriented, their random composition can be shown as in Fig. A4.2.
rN
RUniv
r
re
r
re
r
re
r
re
r
re
r
re
r
re
r
re
r
re
r
re
r
re
x
rN
r N 1 r
rN
RUniv
= RUniv
+ re and the scalar product RUniv
with itself yields:
rN rN
r
N
N 1 2
N 1 r
RUniv RUniv = ( RUniv
) 2 = ( RUniv
) + 2 RUniv
re + re2 ; we now take the mean value:
r N 1 r
N
N 1 2
N 1 2
(A4.1)
( RUniv
) 2 = ( RUniv
) + 2 RUniv
re + re2 = ( RUniv
) + re2 ,
r N 1 r
r
as 2 RUniv re = 0 , because re can be oriented randomly over 360 (or over 4 sr, if you like), so a vector averaging
We
can
obviously
write
that:
N
N 1 2
( RUniv
) 2 = ( RUniv
) + re2
, and then:
N 2 2
N 3 2
( RUniv
) = ( RUniv
) + re2
etc, we get:
N
N 1 2
N 2 2
( RUniv
) 2 = ( RUniv
) + re2 = ( RUniv
) + 2 re2 = .......... = 0 + N re2 = N re2
N
( RUniv
) 2 = N re2
N
( RUniv
) 2 = RUniv = N
RUniv = N re
!!!
, that is:
re2 = N re
, that is:
(Rubino)
(A4.2)
Anyway, its well known that, in physics, for instance, the walk R made over N successive steps r, and taken in random
directions, is really the square root of N by r (see, for instance, studies on Brownian movement).
--------------------------------------------App. 2-Chapter 5: aUnivas absolute responsible of all forces.
App. 2-Par. 5.1: Everything from aUniv.
Still in agreement with what has been said so far, the cosmic acceleration itself aUniv is responsible for gravity all, and so
for the terrestrial one, too. In fact, just because the Earth is dense enough, its got a gravitational acceleration on its
surface g=9,81 m/s2, while if today we could consider it as composed of electrons randomly spread, just like in Fig. A4.1
for the Universe, then it would have a radius
M Earth
re = N Earth re ,
me
g New = G
M Earth
= aUniv = 7,62 1012 m / s 2
2
( N Earth re )
!!!
Therefore, once again we can say that the gravitational force is due to the collapsing of the Universe by aUniv, and all
gravitational accelerations we meet, time after time, for every celestial object, are different from aUniv according to how
much such objects are compressed.
--------------------------------------------App. 2-Par. 5.2: Summarizing table of forces.
aUniv
causes
GRAVITY
causes
ELECTRICITY
WEAK FORCE
(Rubino)
causes (Einstein)
(Maxwell)
STRONG FORCE
MAGNETISM
Fig. A5.1: Summarizing table of forces.
App. 2-Par. 5.3: Further considerations on composition of the Universe in pairs +/-.
The full releasing of every single small spring which stands for the electron-positron pair, is nothing but the annihilation,
with turning into photons of those two particles. In such a way, that pair wouldnt be represented anymore by a pointed
omogeneous along all its trajectory, and this is what a photon is. This will happen when the collapsing of the Universe in
its center of mass will be accomplished.
Moreover, the essence of the pairs e+e-, or, in this era, of e-p+, is necessary in order not to violate Principle of
Conservation of Energy. In fact, the Universe seems to vanish towards a singularity, after its collapsing, or taking place
from nothing, during its inverse Big Bang-like process, and so doing, it would be a violation of such a conservation
principle, if not supported by the Indetermination Principle, according to which an energy E is legitimated to appear
anyhow, unless it lasts less than t, in such a way that
observer doesnt have enough time, in comparison to his means of measure, to figure it out, so coming to the
ascertainment of a violation. And, by the same token, the whole Universe, which is made of pairs +/-, has this property.
And the appearing of a E made of a pair of particles, shows the particles to reject each other first, so showing the same
charge, while the successive annihilation after t shows a successive attraction, showing now opposite charges. So, the
appearing and the annihilation correspond to the expansion and collapsing of the Universe. Therefore, if we were in an
expanding Universe, we wouldnt have any gravitational force, or it were opposite to how it is now, and its not true that
just the electric force can be repulsive, but the gravitational force, too, can be so (in an expanding Universe); now its
not so, but it was!
The most immediate philosophical consideration which could be made, in such a scenario, is that, how to say, anything
can be born (can appear), provided that it dies, and quick enough; so the violation is avoided, or better, its not
proved/provable, and the Principle of Conservation of Energy is so preserved, and the contradiction due to the appearing
of energy from nothing is gone around, or better, it is contradicted it itself.
The proton, then, plays the role of a positron, with respect to the electron and its heavier than it because of the
possibility to exist that the fate couldnt deny to it, around the Anthropical Cosmological Principle, as such a proton
brings to atoms and cells for life which investigates over it.
When the collapse of the Universe will happen, the proton will irradiate all its mass and become a positron, ready to
annihilate with the electron. And through all this, we also answer the question on the unexplained prevailing of matter
over the antimatter: in fact, thats not true; if we consider the proton, that is a future and ex positron, as the antimatter
of the electron, and vice versa, the balance is perfect.
App. 2-Par. 5.4: The Theory of Relativity is just an interpretation of the oscillating Universe just described,
contracting with speed c and acceleration auniv.
On composition of speeds:
1) Case of a body whose mass is m. If in our reference system I, where we (the observers) are at rest, there is a body
whose mass is m and its at rest, we can say:
v1 = 0
and
E1 =
1 2
mv1 = 0
2
1 2
mv2 and its delta energy of GAINED energy E (delta up) is:
2
1
1
1
E = E2 E1 = mv22 0 = m(v2 0)2 = m(v) 2 , with v = v2 v1 .
2
2
2
Now, weve obtained a v which is simply v2 v1 , but this is a PARTICULAR situation and its true only when it starts
E2 =
E = E2 E1 =
V v = (v22 v12 )
1 2 1 2 1
1
mv2 mv1 = m(v22 v12 ) = m(V v )2 , where V
2
2
2
2
is a vectorial delta:
; therefore, we can say that, apart from the particular case when we start from rest (v1 = 0), if we
are still moving, we wont have a simple delta, but a vectorial one; this is simple base physics.
2) Case of the Earth. In our reference system I, in which we (the observers) are at rest, the Earth (E-Earth) rotates
around the Sun with a total energy:
ETot =
E
1
M m
mE vE2 G Sun E
2
RE S
EK =
1
m E v E2
2
of kinetic energy in order to make it jump from its orbit to that of Mars (M-Mars), then, just like in the previous
point 1, we have:
1
1
1
1
mE vE2 mE vM2 = mE (vE2 vM2 ) = mE (V v )2
2
2
2
2
speed deltas are vectorial-like ( V ).
E =
, with
V v = (vE2 vM2 )
3) Case of the Universe. In our reference system I, where we (the observers) are at rest, if we want to make a body,
whose mass is m0 and originally at rest, get speed V, we have to give it a delta v indeed, but for all what has been said
so far, as we are already moving in the Universe, (and with speed c), as for above points 1 and 2, such a delta v must
withstand the following (vectorial) equality:
2
V = V v = (c 2 v New
Abs Univ Speed ) ,
where
(A5.1)
is the new absolute speed the body (m0) looks to have, not with respect to us, but with
m0c 2 .
In more details, as we want to give the body (m0) a kinetic energy Ek , in order to make it gain speed V (with respect to
us), and considering that, for instance, in a spring which has a mass on one of its ends, for the harmonic motion law,
the speed follows a harmonic law like:
2
2
V = V v = (c 2 vNew
Abs Univ Speed ) = [c (c
V = [c 2 (c
m0 c 2
) 2 ] = V , and we report it below:
2
m0 c + EK
m0c 2
)2 ]
2
m0c + EK
(A5.2)
EK = m0c 2 (
1
V2
1 2
c
1)
If now we add to EK such an intrinsic kinetic energy of m0 (which also stands at rest rest with respect to us, not with
respect to the center of mass of the Universe), we get the total energy:
1
2
1) =
V
1 2
c
1
2
V
1 2
c
m0c 2 = m0c 2
(A5.3)
All this after that we supposed to bring kinetic energy to a body at rest (with respect to us). Equation (A5.3) works wery
well on particle accelerators, where particles gain energy, but there are cases (collapsing Universe and Atomic Physics)
where masses lose energy and radiate, instead of gaining it, and in such cases (A5.3) is completely inapplicable, as its in
charge for added energies, not for lost ones.
App. 2-Par. 5.5: On Relativity of lost energies.
In case of lost energies (further phase of the harmonic motion), the following one must be used:
E=
1
m0 c 2
(Rubino)
(A5.4)
which is intuitive just for the simple reason that, with the increase of the speed, the coefficient
lowers m0 in favour
of the radiation, that is of the lost of energy; unfortunately, this is not provided for by the Theory of Relativity, like in
(A5.4).
For a convincing proof of (A5.4) and of some of its implications, I have further files about.
By using (A5.4) in Atomic Physics in order to figure out the ionization energies
EZ
but with a generic Z, we come to the following equation, for instance, which matches very well the experimental data:
EZ = mec 2[1 1 (
Ze2 2
) ]
2 0 hc
(A5.5)
and for atoms with a generic quantum number n and generic orbits:
EZ n = mec 2[1 1 (
Ze 2 2
) ]
4n 0 hc
(Whlin)
Orbit (n)
Energy (J)
Orbit (n)
1
2,1787 10-18
5
2
5,4467 10-19
6
3
2,4207 10-19
7
4
1,3616 10-19
8
Tab. A5.1: Energy levels in the hydrogen atom H (Z=1), as per (A5.6).
(A5.6)
Energy (J)
8,7147 10-20
6,0518 10-20
4,4462 10-20
3,4041 10-20
On the contrary, the use of the here unsuitable (A5.3) doesnt match the experimental data, but brings to complex
corrections and correction equations (Fock-Dirac etc), which tries to correct, indeed, an unsuitable use.
Again, in order to have clear proofs of (A5.5) and (A5.6), I have further files about.
--------------------------------------------App. 2-SUBAPPENDIXES.
App. 2-Subppendix 1: Physical constants.
1,38 1023 J / K
12
2
Cosmic Acceleration aUniv: 7,62 10 m / s
11
Distance Earth-Sun AU: 1, 496 10 m
24
Mass of the Earth MEarth: 5,96 10 kg
6
Radius of the Earth REarth: 6,371 10 m
Boltzmanns Constant k:
1,6 1019 C
1,75 1085
2,818 1015 m
31
Mass of the electron me: 9,1 10 kg
3
Fine structure Constant ( 1 137) : 7,30 10
21
Frequency of the Universe Univ : 4,05 10 Hz
TUniv :
9, 46 1015 m
Parsec pc:
2,73K
Magnetic Permeability of vacuum 0: 1, 26 10 H / m
12
Electric Permittivity of vacuum 0: 8,85 10 F / m
34
Plancks Constant h: 6,625 10 J s
27
Mass of the proton mp: 1,67 10 kg
30
Mass of the Sun MSun: 1,989 10 kg
8
Radius of the Sun RSun: 6,96 10 m
8
Speed of light in vacuum c: 2,99792458 10 m / s
8
2 4
Stephan-Boltzmanns Constant : 5,67 10 W / m K
28
Radius of the Universe (from the centre to us) RUniv: 1,18 10 m
55
Mass of the Universe (within RUniv) MUniv: 1,59 10 kg
6