Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
L/1
CARATTERISTICHE DEI MOTORI
MOTORS FEATURES
• Versioni:
– BRZL: Motore con bocche filettate. • Versions:
– BRZV: Motore predisposto per l'utilizzo delle valvole opzionali. – BRZL: Threaded ports motor.
– BRZV: Valves version motor.
• Valvole opzionali ed accessori:
– VCT11: Valvola controllo traslazione standard. • Optional valves and accessories:
– VCT11-AF: Valvola controllo traslazione con selettrice apertura – VCT11: Standard motion control valve.
freno. – VCT11-AF: Motion control valve with disengagment brake port.
– CMZ: Collettore modulare. – CMZ: Flangeable manifold.
ARZ - Motore idraulico con organo motore orbitale tipo roller e
distribuzione frontale compensata. Valvole di drenaggio interne integrate. ARZ - Orbital motor with roller design and compensated valve plate.
Disponibile nelle cilindrate 50, 80, 100, 130, 160, 200 cm3/giro per Built-in check valves. Available with following displacements from 50
potenze sino a 8.7 kW. up to 250 cc/rev. with power up to 8.7 kW.
HPRM - Motore corto per elevate prestazioni. Organo motore tipo roller HPRM - Short motor for hight performance. Roller design and
e distribuzione frontale compensata a trascinamento separato. Disponibile compensated valve plate. Displacement from 80 up to 200 cc/rev with
nelle cilindrate 80, 100, 130, 160 e 200 cm3/giro per potenze sino a power up to 17 kW. It is possible to fit any valve usually available for
17 kW. Sul motore possono essere flangiate tutte le valvole normalmente HPR series motor.
disponibili per i motori della serie HPR.
L/2
CODICI DI SCELTA
ORDERING CODES
Modello / Model Cilindrata / Displacement Albero / Shaft
BRZL 80 S14
BRZV 100 S14
CARATTERISTICHE TECNICHE
TECHNICAL FEATURES BRZ
Motore - Tipo Cilindrata geometrica Pressione max ingresso Pressione differenz. max Coppia max Portata max Velocità max Potenza max
Motor - Type Geometric displacement Max input pressure Max operating pressure Max torque Max flow Max rotating speed Max horsepower
(cm3/giro) (bar) (bar) (daNm) (l/min) (min -1) (kw)
(cu.cm./rev.) (rpm)
Cont. 175 Cont. 140 Cont. 9,5 Cont. 40 Cont. 815 Cont. 7
BRZ 50 49 Int.* 200 Int.* 175 Int.* 12 Int.* 50 Int.* 1020 Int.* 8,5
Peak** 225 Peak** 225 Peak** 16
Cont. 175 Cont. 175 Cont. 20 Cont. 60 Cont. 735 Cont. 13
BRZ 80 81,5 Int.* 200 Int.* 200 Int.* 21,5 Int.* 75 Int.* 920 Int.* 15
Peak** 225 Peak** 225 Peak** 25
Cont. 175 Cont. 175 Cont. 24 Cont. 60 Cont. 590 Cont. 13
BRZ 100 101,2 Int.* 200 Int.* 200 Int.* 27 Int.* 75 Int.* 740 Int.* 15
Peak** 225 Peak** 225 Peak** 30
Cont. 175 Cont. 175 Cont. 29 Cont. 60 Cont. 475 Cont. 12,5
BRZ 130 125,7 Int.* 200 Int.* 200 Int.* 33 Int.* 75 Int.* 595 Int.* 14,5
Peak** 225 Peak** 225 Peak** 36,5
Cont. 175 Cont. 140 Cont. 30 Cont. 60 Cont. 370 Cont. 10
BRZ 160 161,6 Int.* 200 Int.* 175 Int.* 37 Int.* 75 Int.* 460 Int.* 12,5
Peak** 225 Peak** 225 Peak** 45
Cont. 175 Cont. 115 Cont. 30 Cont. 60 Cont. 295 Cont. 8,5
BRZ 200 201 Int.* 200 Int.* 140 Int.* 36 Int.* 75 Int.* 370 Int.* 10
Peak** 225 Peak** 225 Peak** 55
Cont. 175 Cont. 90 Cont. 30 Cont. 60 Cont. 235 Cont. 7
BRZ 250 251,5 Int.* 200 Int.* 120 Int.* 38 Int.* 75 Int.* 295 Int.* 8,5
Peak** 225 Peak** 225 Peak** 67
Cont. 175 Cont. 70 Cont. 30 Cont. 60 Cont. 190 Cont. 5
BRZ 315 315 Int.* 200 Int.* 100 Int.* 41 Int.* 75 Int.* 235 Int.* 6,5
Peak** 225 Peak** 210 Peak** 75
L/3
DIMENSIONI E PESI
DIMENSIONS AND WEIGHT BRZL
SPECIALE A RICHIESTA - SPECIAL ON REQUEST
BRZL 50 BRZL 80 BRZL 100 BRZL 130 BRZL 160 BRZL 200 BRZL 250 BRZL 315
Pesi - Weight (kg) 5,6 5,9 6,2 6,5 6,8 7,1 7,6 8,3
L/4
DIMENSIONI E PESI
DIMENSIONS AND WEIGHT BRZV
Per l’alimentazione del motore sono disponibili le due valvole VCT11 e VCT11-AP (pag. I/6) ed il collettore modulare CMZ (pag. I/7).
VCT11 e VCT11-AP valves (pag. I/6) and CMZ manifold (pag. I/7) are available to allow motor connection.
BRZV 50 BRZV 80 BRZV 100 BRZV 130 BRZV 160 BRZV 200 BRZV 250 BRZV 315
Pesi - Weight (kg) 5,6 5,9 6,2 6,5 6,8 7,1 7,6 8,3
L/5
DIMENSIONI E PESI
DIMENSIONS AND WEIGHT VCT11/VCT11-AF
(kg)
L/6
DIMENSIONI E PESI
DIMENSIONS AND WEIGHT CMZ-CMZ/AF
pi + pr
Ph = [bar]
2
ph = pressione in carcassa ph = housing pressure
pi = pressione di alimentazione pi = inlet. pressure
pr = pressione di scarico pr = outlet pressure
L/7
CODICI DI SCELTA
ORDERING CODES ARZ
Modello / Model Cilindrata / Displacement Albero / Shaft Fondello / Rear cover
ARZ 50 20 140
ARZ 80 20 140
* Le condizioni intermittenti non devono durare più del 10% di ogni minuto. Intermittent duty must not exceed 10% each minute.
** Le condizioni di picco non devono durare più del 1% di ogni minuto. Peak duty must not exceed 1% each minute.
Per le caratteristiche tecniche non elencate fare riferimento alla parte del catalogo relativa ai motori AR.
As regards not specified technical features, please refer to the section of the catalogue that concerns AR motors.
L/8
DIMENSIONI E PESI
DIMENSIONS AND WEIGHT ARZ
ARZ 50 ARZ 80 ARZ 100 ARZ 130 ARZ 160 ARZ 200 ARZ 250
L/9
CODICI DI SCELTA
ORDERING CODES HPRM
Modello / Model Cilindrata / Displacement
HPRM 130
CARATTERISTICHE TECNICHE
TECHNICAL FEATURES HPRM
Motore - Tipo Cilindrata geometrica Pressione max ingresso Pressione differenz. max Coppia max Portata max Velocità max Potenza max
Motor - Type Geometric displacement Max input pressure Max operating pressure Max torque Max flow Max rotating speed Max horsepower
(cm3/giro) (bar) (bar) (daNm) (l/min) (min -1) (kw)
(cu.cm./rev.) (rpm)
Cont. 210 Cont. 175 Cont. 19 Cont. 65 Cont. 795 Cont. 16
HPRM 80 82 Int.* 250 Int.* 210 Int.* 23 Int.* 80 Int.* 975 Int.* 20
Peak** 300 Peak** 225 Peak** 25
Cont. 210 Cont. 175 Cont. 26 Cont. 75 Cont. 735 Cont. 17
HPRM 100 102 Int.* 250 Int.* 210 Int.* 31 Int.* 90 Int.* 885 Int.* 20
Peak** 300 Peak** 225 Peak** 33
Cont. 210 Cont. 175 Cont. 33 Cont. 75 Cont. 570 Cont. 17
HPRM 130 132 Int.* 250 Int.* 210 Int.* 40 Int.* 90 Int.* 680 Int.* 20,5
Peak** 300 Peak** 225 Peak** 42
Cont. 210 Cont. 150 Cont. 34 Cont. 75 Cont. 465 Cont. 15
HPRM 160 162 Int.* 250 Int.* 210 Int.* 49 Int.* 90 Int.* 555 Int.* 20
Peak** 300 Peak** 225 Peak** 52
Cont. 210 Cont. 140 Cont. 41 Cont. 75 Cont. 370 Cont. 14
HPRM 200 202 Int.* 250 Int.* 175 Int.* 51 Int.* 90 Int.* 445 Int.* 17
Peak** 300 Peak** 225 Peak** 66
Cont. 15,5
HPRM 80 140 12 Int. 19
L/10
DIMENSIONI E PESI
DIMENSIONS AND WEIGHT HPRM
N° 2 M10 profondità filetto 11mm Coppia di serraggio 7 daNm con viti in materiale 12.9
2 5
No. 2 M10 thread depth 11mm 12.9 steel screws tightening torque 7 daNm
Drenaggio motore G1/8" profondità filetto 11mm I motori sono forniti con distanziale
3 6
G1/8" motor drain thread depth 11mm The motors are supplied with spacer
CARATTERISTICHE ACCOPPIAMENTO
COUPLING SPECIFICATION
L/11