Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
POMPE
CATALOGO GENERALE
GENERAL CATALOGUE
POMPE
cod. 7112664
POMPE
Technical Characteristics.
The technical data and characteristics stated in this General Catalogue are not binding. COSPET Srl reserves the right to make modifications without notice.
Therefore weights, dimensions, performances and any other stated issues are indicative only and not binding. Anyway for any technical details you must require
an up-to-date product technical card.
Competent Court.
In case of any dispute the competent Court will be one of Reggio Emilia even if the payment is by bill of exchange.
DIG/DIG-T 80-2,2
DIG/DIG-T 50-1,1
DIG/DIG-T 50-1,5
POTENZA POTENZA
TIPO NOMINALE ASSORBITA
AMPERE Q = PORTATA - CAPACITY
TYPE NOMINAL INPUT
POWER POWER
APPLICAZIONI APPLICATION
Elettropompe autoadescanti monoblocco con girante aperta. Selfpriming monoblock water pumps with open impeller.
La valvola di ritegno incorporata nella bocca aspirante im- The check valve inside the suction outlet avoids the syphon
pedisce all’arresto l’effetto sifone e assicura il riadescamento effect when stopping and assures the automatic re-start
automatico, ad ogni avviamento la pompa si riadesca anche each time. The pump selfprimes even if partially filled and if
se riempita solo parzialmente di liquido e con il tubo aspiran- the suction hose is completely empty. Suitable to drain clean
te completamente vuoto. Impiegate nei drenaggi di acque or slightly dirty water and in flood irrigation systems.
pulite o leggermente sporche, nell’irrigazione a scorrimento
e in interventi di svuotamento.
MOTORE MOTOR
- Motore elettrico ad induzione a 2 poli (n = 2850 min-1) - Two-Pole induction motor (n = 2850 min-1)
- Isolamento Classe F - Insulation Class F
- Protezione IP 55 - Protection IP 55
MATERIALI MATERIALS
- Corpo pompa Ghisa - Pump body Cast Iron
- Supporto motore Ghisa - Motor Support Cast Iron
- Girante Ghisa - Impeller Cast Iron
- Albero motore Acciaio Inox AISI 304 - Shaft with motor Stainless Steel AISI 304
- Tenute meccaniche Ceramica/Grafite/NBR - Mechanical seal Ceramic/Graphite/NBR
G N
DNM DNA
H
H1
A B
E C
DIMENSIONI
TIPO PESO
DIMENSIONI mm - DIMENSIONS mm DIMENSIONS H
TYPE mm WEIGHT
P
Monofase Trifase
Single-phase Three-phase
A B C E G H H1 N DNA DNM P L H Kg
DIG 50-1,1 DIG-T 50-1,1 260 152 412 185 193 302 240 122 2” 2” 229 416 246 25,6
DIG 50-1,5 DIG-T 50-1,5 260 152 412 185 193 302 240 122 2” 2” 229 416 346 26,6
DIG 80-2,2 DIG-T 80-2,2 335 193 598 200 193 312 220 150 3” 3” 290 570 420 34,4
DIG-T 80-7,5
DIG-T 80-5,5
DIG-T 80-4
POTENZA POTENZA
TIPO NOMINALE ASSORBITA
AMPERE Q = PORTATA - CAPACITY
TYPE NOMINAL INPUT
POWER POWER
APPLICAZIONI APPLICATION
Elettropompe autoadescanti monoblocco con girante aperta. Selfpriming monoblock water pumps with open impeller.
La valvola di ritegno incorporata nella bocca aspirante im- The check valve inside the suction outlet avoids the syphon
pedisce all’arresto l’effetto sifone e assicura il riadescamento effect when stopping and assures the automatic re-start
automatico, ad ogni avviamento la pompa si riadesca anche each time. The pump selfprimes even if partially filled and if
se riempita solo parzialmente di liquido e con il tubo aspiran- the suction hose is completely empty. Suitable to drain clean
te completamente vuoto. Impiegate nei drenaggi di acque or slightly dirty water and in flood irrigation systems.
pulite o leggermente sporche, nell’irrigazione a scorrimento
e in interventi di svuotamento.
MOTORE MOTOR
- Motore elettrico ad induzione a 2 poli (n = 2850 min-1) - Two-Pole induction motor (n = 2850 min-1)
- Isolamento Classe F - Insulation Class F
- Protezione IP 55 - Protection IP 55
MATERIALI MATERIALS
- Corpo pompa Ghisa - Pump body Cast Iron
- Supporto motore Ghisa - Motor Support Cast Iron
- Girante Ghisa - Impeller Cast Iron
- Albero motore Acciaio Inox AISI 304 - Shaft with motor Stainless Steel AISI 304
- Tenute meccaniche Ceramica/Grafite/NBR - Mechanical seal Ceramic/Graphite/NBR
G N
DNM
DNA
H
H1
A B
E C
DIMENSIONI
TIPO PESO
DIMENSIONI mm - DIMENSIONS mm DIMENSIONS H
TYPE mm WEIGHT
P
Trifase
Three-phase
A B C E G H H1 N DNA DNM P L H Kg
DIG-T 80-4 376,5 252 628,5 179 277 443 350 198 3” 3” 372 805 550 76,5
DIG-T 80-5,5 424 252 676 216 277 443 350 198 3” 3” 372 805 550 90,5
DIG-T 80-7,5 424 252 676 216 277 443 350 190 3” 3” 372 805 550 94
DIG-T 100-15
DIG-T 100-9,5
DIG-T 100-11
POTENZA POTENZA
TIPO NOMINALE ASSORBITA
AMPERE Q = PORTATA - CAPACITY
TYPE NOMINAL INPUT
POWER POWER
APPLICAZIONI APPLICATION
Elettropompe autoadescanti monoblocco con girante aperta. Selfpriming monoblock water pumps with open impeller.
La valvola di ritegno incorporata nella bocca aspirante im- The check valve inside the suction outlet avoids the syphon
pedisce all’arresto l’effetto sifone e assicura il riadescamento effect when stopping and assures the automatic re-start
automatico, ad ogni avviamento la pompa si riadesca anche each time. The pump selfprimes even if partially filled and if
se riempita solo parzialmente di liquido e con il tubo aspiran- the suction hose is completely empty. Suitable to drain clean
te completamente vuoto. Impiegate nei drenaggi di acque or slightly dirty water and in flood irrigation systems.
pulite o leggermente sporche, nell’irrigazione a scorrimento
e in interventi di svuotamento.
MOTORE MOTOR
- Motore elettrico ad induzione a 2 poli (n = 2850 min-1) - Two-Pole induction motor (n = 2850 min-1)
- Isolamento Classe F - Insulation Class F
- Protezione IP 55 - Protection IP 55
MATERIALI MATERIALS
- Corpo pompa Ghisa - Pump body Cast Iron
- Supporto motore Ghisa - Motor Support Cast Iron
- Girante Ghisa - Impeller Cast Iron
- Albero motore Acciaio Inox AISI 304 - Shaft with motor Stainless Steel AISI 304
- Tenute meccaniche Ceramica/Grafite/NBR - Mechanical seal Ceramic/Graphite/NBR
G N
DNM
DNA
H
H1
A B
E C
DIMENSIONI
TIPO PESO
DIMENSIONI mm - DIMENSIONS mm DIMENSIONS H
TYPE mm WEIGHT
P
Trifase
Three-phase
A B C E G H H1 N DNA DNM P L H Kg
DIG-T 100-9,5 552 322,5 874,5 235 315 541 411 256 4” 4” 397 935 635 161,5
DIG-T 100-11 552 322,5 874,5 235 315 541 411 256 4” 4” 397 935 635 162,5
DIG-T 100-15 552 322,5 874,5 235 315 541 411 256 4” 4” 397 935 635 172
POMPE
cod. 7112664