Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Description
SBR LATEX is a carboxylated styrene butadiene copolymer latex admixture that is designed as an integral
adhesive for cement bond coats, mortars and concrete to improve bond strength and chemical resistance.
Primary Applications
• Toppings, repairs and leveling concrete surfaces • General reconstruction work/latex modified overlays
• Thin sets, terrazzo, stucco and bonding coats • Bridge decks, highways and parking decks
Features/Benefits
• Reduces cracking through increased mortar flexural • Improves bond strengths to hardened concrete
strength
• Increases wear resistance under rubber wheeled • Increases durability during freeze/thaw cycles
traffic • Increases mortar tensile strength
Technical Information
SBR Latex-Modified
Property SBR LATEX-Modified
Mortar
Mortar Mix Design:
3 days: 3,200 (22)
Compressive Strength, psi (MPa) Type I Portland Cement
7 days: 4,000 (28)
ASTM C 109
28 days: 4,700 (32)
94 lb (43 kg)
Sand
Flexural Strength @ 7 days, psi (MPa) 3 days: 1,425 (9.8)
300 lb (136 kg)
ASTM C 78 7 days: 2,075 (14.3)
SBR LATEX
SBR LATEX
Tensile Strength, 7 days, psi (MPa) 3 days: 330 (2.2) 2 gal (7.7 L)
ASTM C 190 7 days: 480 (3.3)
Water
Appearance White liquid 3 gal (11.4 L)
Packaging
SBR LATEX is packaged in 55 gal (208 L) drums, 5 gal (18.9 L) pails and cases of 6/1 gal (3.8 L) units.
Master Format #:
Shelf Life
03 05 00
Specifications/Compliances
Complies with ASTM C 1059-86, Type II
SBR LATEX is classified by The American Concrete Institute as a non-re-emulsifiable bonding admixture
Canadian MTQ
WARRANTY: The Euclid Chemical Company (“Euclid”) solely and expressly warrants that its products shall be free from defects in materials and workmanship for one (1) year from the date of purchase. Unless authorized
in writing by an officer of Euclid, no other representations or statements made by Euclid or its representatives, in writing or orally, shall alter this warranty. EUCLID MAKES NO WARRANTIES, IMPLIED OR OTHERWISE,
AS TO THE MERCHANTABILITY OR FITNESS FOR ORDINARY OR PARTICULAR PURPOSES OF ITS PRODUCTS AND EXCLUDES THE SAME. If any Euclid product fails to conform with this warranty, Euclid will replace the
product at no cost to Buyer. Replacement of any product shall be the sole and exclusive remedy available and buyer shall have no claim for incidental or consequential damages. Any warranty claim must be made within
one (1) year from the date of the claimed breach. Euclid does not authorize anyone on its behalf to make any written or oral statements which in any way alter Euclid’s installation information or instructions in its product
literature or on its packaging labels. Any installation of Euclid products which fails to conform with such installation information or instructions shall void this warranty. Product demonstrations, if any, are done for illustrative
purposes only and do not constitute a warranty or warranty alteration of any kind. Buyer shall be solely responsible for determining the suitability of Euclid’s products for the Buyer’s intended purposes.