Sei sulla pagina 1di 23

W Series Brake Motor NEMA 56-286T - TEFC

Cast Aluminum Construction


Single Phase




Three Phase Brake Motors With


56/56C


Lightweight High Performance Cast


Aluminum Frames. Features
Include:
Aluminum
NEMA

 1.25 service factor at 60Hz, 1.0


service factor at 50Hz
      
Cast Iron
NEMA

    


for easy conversion to F1, F2, F3
  ! !" #$ 
Explosion Proof

 %  &'())!$   


NEMA

for washdown duty enclosure


   *  ! 
brackets for increased
Close Coupled
Pump Motor

  $    


 +&'(/4!$  
 AC brake mounted to non-drive
end of motor
2 Speed Motor

 Brake is spring applied, power


NEMA

release
 Dual rated 60/50Hz at same HP
 Cast Aluminum conduit box with
Brake Motor
NEMA

drilled and tapped entry is


rotatable in 90 degree
increments
 CSA approved for Class I;
Division 2; Groups A, B, C & D,
Zone 2; Groups IIA & IIB T3 on
sine wave power
Notes:  Internal tropicproof
44 RF - Removable Feet
W Series Brake Motor NEMA 56-286T - TEFC
Foot Mounted - Cast Aluminum
Brake Ft. FL C Dim. S.F. FL
HP RPM Frame Voltage P/N List LBS Notes
Lbs Eff. (IN) 60 Hz Amps

Single Phase
              RF
             RF
0.5
               RF
              RF
               25 RF
              25 RF


56/56C
               25 RF
0.75
             25 RF


               25 RF
              25 RF
                RF
                RF

Aluminum
NEMA
               RF
1
             RF
                    RF
                  RF
               RF
               RF

Cast Iron
NEMA
              RF
             RF
1.5
                    RF
                   RF
                    RF

Explosion Proof
                    RF

NEMA
                      RF
                    RF
2
                     RF
                    RF
                   RF

Close Coupled
Pump Motor
                  RF
3
                 RF
                RF
                   RF
                  RF
5
                  RF

2 Speed Motor
                  RF

NEMA
                    RF
                  RF
7.5
                  RF
                 RF
                    RF
Brake Motor

                   RF


10
NEMA

                   RF


                 RF

Discount Category 15
               !"# $%&
254T - 286T frame brake motors available. Contact Brook Crompton for pricing and availability.

45
W Series Brake Motor NEMA 56-286T - TEFC
C-Face With Removable Feet - Cast Aluminum
Brake Ft. FL C Dim. S.F. FL
HP RPM Frame Voltage P/N List LBS Notes
Lbs Eff. (IN) 60 Hz Amps
Single Phase

                RF


               RF
0.5
                RF
               RF
                 RF
                RF

56/56C

                 RF


0.75
               RF


                 RF


                RF
                RF
                RF
Aluminum
NEMA

                RF


1
              RF
                    RF
                  RF
                 RF
                 RF
Cast Iron
NEMA

                RF


               RF
1.5
                    RF
                   RF
                    RF
Explosion Proof

                    RF


NEMA

                      RF


                    RF
2
                     RF
                    RF
                    RF
Close Coupled
Pump Motor

                   RF


3
                  RF
                 RF
                  RF
                 RF
5
                  RF
2 Speed Motor

                  RF


NEMA

                  RF


                RF
7.5
                RF
               RF
                   RF
Brake Motor

                  RF


10
NEMA

                 RF
               RF

Discount Category 15
               !"# $%&
D-Flange mounted motors also available at same price as C-Face mounted motors.
Change from “CBRK” to “DBRK” at end of part number.

254T - 286T frame brake motors available. Contact Brook Crompton for pricing and availability.

46
W Series Brake Motors IEC 71-180L - TEFC
Cast Aluminum Construction
IEC/Metric
Aluminum



Three Phase Brake Motors With


IEC/Metric
Cast Iron

Lightweight High Performance Cast


Aluminum Frames. Features Include:

 1.25 service factor at 60Hz, 1.0


Explosion Proof
ATEX EEXD IIB

service factor at 50Hz


     
temperature rise
Explosion Proof
ATEX EEXDE IIC

    


for easy conversion to F1, F2, F3
  ! !" #$ 
 %  &'())!$   
Non-Sparking

for washdown duty enclosure


ATEX EEXNA

   *  !


both brackets for increased
  $    
Brake Motor

 +&'(/4!$  


IEC/Metric

 Dual rated 60/50Hz at same HP


 Cast aluminum conduit box with
drilled and tapped entry is
rotatable in 90 degree
increments
 CSA approved for Class I;
Division 2; Groups A, B, C & D,
Zone 2; Groups IIA & IIB T3 on
sine wave power
 Internal tropicproof

Notes:
RF - Removable Feet
EU - Euronorm Dimensions

82
W Series Brake Motors IEC 71-180L - TEFC
B3 (Foot Mount) - Cast Aluminum
Brake Ft. FL L Dim. S.F. FL
HP Kw RPM Frame Voltage P/N List LBS Notes
Lbs Eff. (mm) 60 Hz Amps

IEC/Metric
Aluminum
                RF, EU
               RF, EU
0.50 0.37
                RF, EU
               RF, EU
                  RF, EU
                RF, EU

IEC/Metric
Cast Iron
                RF, EU
0.75 0.55
              RF, EU
                RF, EU
                RF, EU
                 RF, EU

Explosion Proof
ATEX EEXD IIB
               RF, EU
1 0.75
              RF, EU
              RF, EU
               RF, EU
              RF, EU
1.5 1.1
             454     RF, EU

Explosion Proof
ATEX EEXDE IIC
            454      RF, EU
              454      RF, EU
             454     RF, EU
2 1.5
              454     RF, EU
             454     RF, EU
              454     RF, EU

Non-Sparking
             454     RF, EU

ATEX EEXNA
3 2.2
                 RF, EU
                RF, EU
                  RF, EU
                 RF, EU
4 3
                  RF, EU

Brake Motor
                  RF, EU

IEC/Metric
                   RF, EU
                  RF, EU
5.5 4
                  RF, EU
                RF, EU
                     RF, EU
                   RF, EU
7.5 5.5
                   RF, EU
                  RF, EU
                    RF, EU
                   RF, EU
10 7.5
                   RF, EU
                 RF, EU

Discount Category 15
               !"# $%&

36
83
W Series Brake Motors IEC 71-180L - TEFC
B14 (C-Face With B3 Removable Feet) - Cast Aluminum
Brake Ft. FL L Dim. S.F. FL
HP Kw RPM Frame Voltage P/N List LBS Notes
Lbs Eff. (mm) 60 Hz Amps
IEC/Metric
Aluminum

               25 RF, EU


              25 RF, EU
0.50 0.37
                RF, EU
               RF, EU
                 25 RF, EU
               25 RF, EU
IEC/Metric
Cast Iron

                RF, EU


0.75 0.55
              RF, EU
               RF, EU
               RF, EU
                RF, EU
Explosion Proof
ATEX EEXD IIB

              RF, EU


1 0.75
              RF, EU
              RF, EU
               RF, EU
              RF, EU
1.5 1.1
              454     RF, EU
Explosion Proof
ATEX EEXDE IIC

             454      RF, EU


               454      RF, EU
              454     RF, EU
2 1.5
         $2,224    454     RF, EU
        $2,224    454     RF, EU
         $2,242    454     RF, EU
Non-Sparking

        $2,242    454     RF, EU


ATEX EEXNA

3 2.2
                RF, EU
               RF, EU
                  RF, EU
                 RF, EU
4 3
                 RF, EU
                 RF, EU
Brake Motor
IEC/Metric

                   RF, EU


                  RF, EU
5.5 4
                  RF, EU
                RF, EU
                    RF, EU
                  RF, EU
7.5 5.5
                   RF, EU
                  RF, EU
                     RF, EU
                    RF, EU
10 7.5
                   RF, EU
                 RF, EU

Discount Category 15
               !"# $%&

84
W Series Brake Motors IEC 71-180L - TEFC
B5 (D-Flange With B3 Removable Feet) - Cast Aluminum
Brake Ft. FL L Dim. S.F. FL
HP Kw RPM Frame Voltage P/N List LBS Notes
Lbs Eff. (mm) 60 Hz Amps

IEC/Metric
Aluminum
               25 RF, EU
              25 RF, EU
0.50 0.37
                RF, EU
               RF, EU
                 25 RF, EU
               25 RF, EU

IEC/Metric
Cast Iron
                RF, EU
0.75 0.55
              RF, EU
               RF, EU
               RF, EU
                RF, EU

Explosion Proof
ATEX EEXD IIB
              RF, EU
1 0.75
              RF, EU
              RF, EU
               RF, EU
              RF, EU
1.5 1.1
              454     RF, EU

Explosion Proof
ATEX EEXDE IIC
             454      RF, EU
               454      RF, EU
              454     RF, EU
2 1.5
         $2,224    454     RF, EU
        $2,224    454     RF, EU
         $2,242    454     RF, EU

Non-Sparking
        $2,242    454     RF, EU

ATEX EEXNA
3 2.2
                RF, EU
               RF, EU
                  RF, EU
                 RF, EU
4 3
                 RF, EU
                 RF, EU

Brake Motor
IEC/Metric
                   RF, EU
                  RF, EU
5.5 4
                  RF, EU
                RF, EU
                    RF, EU
                  RF, EU
7.5 5.5
                   RF, EU
                  RF, EU
                     RF, EU
                    RF, EU
10 7.5
                   RF, EU
                 RF, EU

Discount Category 15
               !"# $%&

85
PG & PM Witton Kramer Brakes

The Perigrip Brake Is A Well Proven


]

Design With a Laminated Steel Magnet


Brake

System. The Design Incorporates The


U>

Following Features:
Dings Coupler

 < $=  "    


Brake

 +#>!  


lever as standard
 ?@!J  $ $@ !! 
 A welded steel hinged cover
protects the complete magnet
assembly against dust and
damage
   
 CSA approved

The PM Brake’s Long Established and


Well Proven Cast Iron Design Has
Stainless Steel Pivot Pins And Is Suitable
For a Wide Range of Industrial
V  Y[\ $ '   
The Following Features:
 Main components are of cast steel,
and high quality cast iron
 Spring and all machined steel parts
are plated
 +#>!  
lever as standard
 8 hour rated in any period of 24
hours
   !  +
shoes from dragging on the drum
 +  Q
 U     
encapsulated magnet coil
86
 CSA approved
PG Witton Kramer Brakes

Brake Ft. G Dim.

U>
Size Voltage P/N List LBS
Lbs (IN.)

Brake
           

]
4”
          
          
6”
          
        

Dings Coupler
8”
        

Brake
        
10”
        
          
12”
         

Discount Category 40

Ret
A (dia)
torque B C D E F G H J K L
Inch
lbf ft
4   4.5 2.5  5.25       
 5.5            2.5 
              
    4.5        
                24

A (dia) Gross Consumption Inrush


M N P Q R T
Inch Mass lb VA VA
4         
4.25   5.25    
!"# 
           
times
        
       24  

87
PM Witton Kramer Brakes
]

Brake Ft. G Dim.


Size Voltage P/N List LBS
Lbs (IN.)
Brake

   %       22   25


4”   %       22   25
U>

  %  &     22   25


   %   '       
Dings Coupler

6”   %   '       


  %   ( '        
Brake

   % '     


8”   % '     
  % ' '     
   %  '     
10”   %  '     
  %  ' '      
   %   '      
12”   %   '      
  %  ' '       
   %   )        
15”   %  '        
  %  '        

Discount Category 41

Ret
A (dia) Weight Consumption
torque B C D E F G H J K M S
Inch lbs VA
lbf ft
4 22             25 
        5.5      
   5.5 4.5            
                 
                   
                  
             25.25     
               25.5  
24               

88
Dings C-Face Coupler Brakes

U>
Brake
]
60 Series Double C Face
NEMA Frame Sizes 56C, 143TC, 145TC

Dings Coupler
Torque Ratings: 3 to 15 lb-ft

Brake
*%  +,
 U ! @ $   @^_%V`
CSA 4, IP56
 Exterior paint: gray enamel
 Nameplate: Stainless Steel
  [ &j)@/   !
and set)
 V]&`Y)|$ V}&)Y~~|  
 Thermal capacity: 6 HPS/MIN
 Maximum RPM: 3600
 ?V#€j4~j`
     &&4jj)@*
brakes

70 Series Double C Face


NEMA Frame Sizes 182TC through 215TC/UC
Torque Ratings: 15 to 50 lb-ft
*%  +,
 U ! @ $   @^_%V`
CSA 4, IP56
    &  +  
housing
 Exterior paint: red primer
 Nameplate: stainless steel
   &/@/)   !
and set)
 V]&~Y)|$ V}&‚Y/)|  
 Maximum RPM: 3600
 ?V#€j4~j`
     &< !!
89
Dings C-Face Coupler Brakes
]
Brake
U>

60 Series Double C-Face - NEMA Frame Sizes 56C, 143TC, 145TC

Brake Inertia Dimensions in inches


Typical Wt. List
Dings Coupler

Torque Voltage Part No. Wk2


Hp Lbs. Price
lb-ft lb-ft2 C X AC
Brake

           


            
         
            
            
          
            
              
          
           
            
         

Discount Category 81

90
Dings C-Face Coupler Brakes

U>
Brake
]
70 Series Double C-Face - NEMA Frame Sizes 182TC Through 215TC/UC
AH bore Max Motor AH ext Brake Shaft
Brake Inertia Dimensions in inches

Dings Coupler
Typical Shaft Length Extension Length List
Torque Voltage Part No. Wk2
Hp 1.125 1.375 1.625 1.125 1.375 1.625 Price

Brake
lb-ft lb-ft2 C H X N AC
Dia Dia Dia Dia. Dia Dia
    *               
  
  *               
    *                
 
  *                
     *              
5 25
   *              
     *                
 
   *                
     *               
 
   *               
     *        2.25          
 
   *        2.25          
     *       2.25        $4,425
  
   *       2.25        $4,425

Discount Category 81

91
Flange Kit Part Numbers

W-Series C-Face (B14) & D-Flange (B5) Kits


W Premium NEMA Flanges W Premium Metric Flanges
C Face D Flange B14 - C Face B5 - D Flange
Frame List List Frame List List
Stock Number Stock Number Stock Stock
Number Number
 +     
       
   + $45 + $45
      
          
 + $45 + $45
 -       
 +  + 
  %)*         
        
  %)* +   +  
 %)*        
 - %)*       
 %)* +   +  
 - %)* +    
        
        
    $225   $225
         
      
         
   ++   
  ++    + +   
225S   + +   
  + +   + +  
225M   + +   
  ++    ++   
   ++   
 + +    ++   
   ++   
   ++   
   ++   
   ++    
   ++    
Note: Flange part numbers are for current models only.
            
Note:        

92
Mounting Accessories
             

SLIDE RAILS
FRAME 143/5T 182/4T 213/5T 254/6T 284/6T 324/6T 364/5T 404/5T 444/5T
) "         
/              

SLIDE BASES (Double adjustment screw type)


FRAME 56 143T 145T 182T 184T 213T 215T 254T 256T 284T 286T
) "           
/           

FRAME 324T 326T 364T 365T 404T 405T 444T 445T 447T 504 505
) "             
/                   

TRANSITION BASES

RERATED FRAME SIZE FORMER FRAME STOCK No LIST

        

        

   0  0 0  $55

     0  0 0   

     0  0  0  

          

     0  0  0  

     0 0 0   

     0 0 0  

    444US, 445US 0  

   444U, 445U 0  

   444US,445US 0   

Discount Category 30
93
; %  + < = 

STOCK MODIFICATIONS FOR TEFC MOTORS


FRAME - NEMA 56 143/5 182/4 213/5 254/6 284/6 324/6 364/5 404/5 444/5 504/5

FRAME - METRIC 63/80 90 100/112 132 160 180 200 225 250 280 315

TEFC MODIFICATIONS

SHAFTS

)//* 1 3    $255          

/'* ** 13                    

)0* ** 13                   

/' %* +/-


        PRICING ON REQUEST
%%* -)*
*6** * 0% ) 7     $245             

** */'             PRICING ON REQUEST

 */' ) )*            

*%)68 %8 /% 9 *          $525         

*%*           

*/ )                  

))/) */ 13           PRICING ON REQUEST

)%/ %)) 1 3 $225                  

+*-*%)) /% 13            PRICING ON REQUEST

-*/) /6) 1 3          $545       

-**  )  )                

/% )*             PRICING ON REQUEST

*'/ ')0/' /'                    

*)* PRICING ON REQUEST

- ')0/' /' PRICING ON REQUEST

)* * )+* PRICING ON REQUEST

** / %/              

0) %/ PRICING ON REQUEST

94
NEMA JM/JP TEFC Dimensions
Frame Sizes 143-364

JM Dimensions
BF EN Keyseat
BD Tap ER
Frame U AH AJ AK BB Bolt EL EM Bolt EQ ET
Max. No. Tap Pen. Tap Drill
Pen.
EP Min. R
ES
S
Size Size Depth Min. Min.
Allow Allow.
Max.
            
 & 9  &   4         4.25  
               
             
 & 9  &   4          4.25  
                
             
& 9 &    4         4.25  
                
               
 & 9  &    4         5.25 
                 
                 
 & 9  &    4          5.25 
                  
                 
 & 9  &    4          5.25 
                  
                 
 & 9  &    4          5.25 
                  

JP Dimensions
BF EN Keyseat
BD Tap ER
Frame U AH AJ AK BB Bolt EL EM Bolt EQ ET
Max. No. Tap Pen. Tap Drill
Pen.
EP Min. R
ES
S
Size Size Depth Min. Min.
Allow Allow.
Max.
           
 &% 9  &%   4           
              
            
 &% 9  &%   4            
               
             
&% 9 &%    4           
                 
             
 &% 9  &%    4           
                 
              
 &% 9  &%    4            
                 
              
 &% 9  &%    4            
                
              
 &% 9  &%    4           
            2.    5.

*For standard NEMA foot dimensions see page 96


95
NEMA TEFC Dimensions
Frame Sizes 56 - 586

FOOT MOUNTED

FOOT INSTALLATION DIM. SHAFT INSTALLATION DIM. GENERAL DIM.


Frame
Size
2E 2F H BA N-W U S AH R ES D AA
             
    2.25 2.25        
5.5
    2.25 2.25        
  4.5             

  5.5             
 5.5           5.25 

            5.25 
     4.25            

    4.25            
              

               
              

               
     5.25 5.25        
 
     5.25         
     5.25 5.25        
 
     5.25         
                

               
                 

                
                  

        4.25         
               

     4.25         
             

              
             

              
            

             
 :              

 :        5.25      
:              

:        5.25      
:            
24
:             
 : 22           
24
 : 22            

67
96
NEMA TEFC Dimensions
Frame Sizes 56 - 586

C FACE D FLANGE

Frame D FLANGE DIMENSIONS C FACE DIMENSIONS


Size
AJ AK BB BD BF AJ AK BB BD BF
       4.5   
 
       4.5   
 
   
         
    
 - 
      4.5  
 -  

            

 
             
 
 
             
 
 
             
 
 
             
 
 
             
 
 
             
 
 
             
 
 
               

 
               


             


             


             


             

 :
22    25          
 :
:
22    25          
:
:
          
:
 :
          
 :

68
97
IEC Euronorm TEFC Dimensions
Frame Sizes 63 - 315

B3 (FOOT MOUNTED)

FOOT MOUNTING SHAFT GENERAL


Frame
Size
H A B C D E F G K AB HD AC TBW TBH KK
       4          6  
    45   5           6  
                6  
      24      225     6  
       24      225     6  
          24         6  
          24         2 X CM25
            242  255     2 X CM25
           242  255     2 X CM25
    254   42            6 
    254 254  42            6 
         42.5          6 
         42.5          6 
     55      525     
2 55   
225S 225           
     
2 55   
225M 225           
      
2     
               
      
2     
               
      
2     
              
      
2    
     M24        
     
2    
     M24        
     
2    
     M24      
     

69
98
IEC Euronorm TEFC Dimensions
TEFC Dimensions Frame Sizes 63 - 315

B14 (C-FACE) B5 (D-FLANGE)

D FLANGE (B5) C FACE (B14)


Frame
Size
N M P S T N M P S T
          M5 2.5
           2.5
            
            
            
      4      
       4      
       4      
       4      
      5     
      5     
     5     
     5     
     5     
225S     5     
225M     5     
     5     
     5     
     5     
     5     
    24     
    24     

70
99
Y= [Y+\  =   +] @%+  +

@%+  +
IP (Ingress Protection) IP 5 5
IEC Metric Motors

Protection Against Solid Objects Protection Against Liquids

# Brief Description* @%+  + # Brief Description* @%+  +

0 ";!"<=><=? @A>BD;=G No special protection 0 ";!"<=><=? @A>BD;=G No special protection

Accidental or inadvertent contact with


or approach to live and moving parts
Machine protected against inside the enclosure by a large
Machine protected against !DD;L TA<=! 1V=!<D>AOOW PAOOD;L ?!"G3
1 solid objects greater than surface of the human body, such as a 1 dripping water shall have no harmful effect.
 @@HH BA;? 1JK< ;" !"<=><D"; ALAD;G<
?=ODJ=!A<= A>>=GG3 /;L!=GG "P G"OD?
"JQ=><G =#==?D;L  @@ D; ?DA@=<=!
";<A>< JW Y;L=!G "! GD@DOA! "JQ=><G
Machine protected against ;"< =#>==?D;L  @@ D; O=;L<B TD<B Vertically dripping water shall have no
Machine protected against dripping
2 solid objects greater than or approach to live or moving parts 2 TA<=! TB=; <DO<=? K <" [
harmful effect when the machine is tilted in
 @@HH inside the enclosure. Ingress of solid A;W A;LO= K <" [ P!"@ D<G ;"!@AO "GD<D";
"JQ=><G =#>==?D;L  @@ D; ?DA@=<=!

Contact with or approach to live or


Machine protected against moving parts inside the enclosure by Vertically dripping water shall have no
Machine protected against
3 solid objects greater than ools or wires exceeding 2.5 mm in 3 spraying water
harmful effect when the machine is tilted in
 @@HH diameter. Ingress of solid objects A;W A;LO= K <" [ P!"@ D<G ;"!@AO "GD<D";
=#>==?D;L  @@ D; ?DA@=<=!

Contact with or approach to live or


Machine protected against +A<=! PAOOD;L AG A G!AW A< A;W A;LO= K
moving parts inside the enclosure by Machine protected against
4 solid objects greater than
wires or strips of thickness greater 4 splashing water
<" [ P!"@ <B= V=!<D>AO GBAOO BAV= ;"
@@HH harmful effect
<BA;  @@ D; ?DA@=<=!

Contact with or approach to live or


moving parts inside the enclosure.
+A<=! !"Q=><=? JW A ;"__O= ALAD;G< <B=
Ingress of dust is not totally prevented but
5 KG<!"<=><=? @A>BD;=]
?KG< ?"=G ;"< =;<=! D;GKPY>D=;< ^KA;<D<W <" 5 Machine protected against water jets machine from any direction shall have
no harmful effect.
interfere with satisfactory operation of the
machine.

Contact with or approach to live or moving +A<=! P!"@ B=AVW G=AG "! TA<=!
6 KG<<DLB< @A>BD;=] parts inside the enclosure. 6 Machine protected against heavy seas projected in powerful jets shall not enter
No ingress of dust <B= @A>BD;= D; BA!@PKO ^KA;<D<D=G

                     
 !       "##$ % &          '       
       '  &        ( )
*              +   ,    #   #    
     -  #              

102
Mounting Codes

IEC Mounting Codes

NEMA Mounting Codes

103

Potrebbero piacerti anche