Codice Identificazione del prodotto tipo Numero di tipo 998-1/01 Identification code of the product-type 998-1/01 Type 20130429 Code d’identification du produit type Type
Uso previsto del prodotto da
Malta per intonaci interni ed esterni costruzione, conformemente alla Intended use of the construction UNI EN 998-1: 2016 Rendering / Plastering Mortar product, in accordante with Usage prévu du produit de Usage général rendu / mortier plâtrage construction, conformément à
Nome e indirizzo del fabbricante IDEALWORK Srl
Name, registrered name and contact address of manufacturer Via Kennedy, 52 Nom et adresse du fabricant 31030 Vallà di Riese Pio X (TV) - Itallia
Sistema di valutazione e verifica della costanza della prestazione del prodotto da
costruzione System of assessment and verification of constancy of performance of the 4 construction product Système d’évaluation et de verification de la constance des performances
Il Laboratorio Notificato ha rilasciato i certificati delle prove iniziali di tipo
ENCO Srl The Notified Laboratory issued certificates of initial type testing N° 210 Le Laboratoire Notifié délivré des certificats d'essais de type initial
Ideal Work Srl
Via Kennedy, 52 – 31030 Vallà di Riese Pio X (TV) – Italia Cod. Fiscale, P. IVA e Reg. Impr TV 03293380261 - Cap. Soc. € 45.900,00 i.v. Tel **39 0423 4535 Fax **39 0423 748429 www.idealwork.it info@idealwork.it Ideal Work DoP n 001 998-1_01 Ideal Wall 20130429_Rev 2017.11.1 Prestazioni dichiarate Declared Performance Performances déclarées Deklarierte Leistung
Designazione Malta per scopi generali per intonaci interni / esterni GP
Designation General purpose rendering / plastering Mortar GP // Désignation Usage général rendu / mortier plâtrage GP Bezeichnung Allzweck- rendering / putzmörtel GP Massa volumica Dry bulk density 1 Densité 1513 kg/m3 Dichte Resistenza alla compressione Compressive strength 2 Resistance a la compression CS II Druckfestigkeit Adesione Adhesive strength 3 Adhésion > 0,24 N/mm2 (FP A) Haftung Adesione dopo Gelo e Disgelo Adhesive strength after thermal cycle 4 dherence après cyclage thermique > 0,1 N/mm2 (FP A) Haftung nach Temperaturwechsel Assorbimento d'acqua per capillarità Water absorption due to capillary action 5 Absorption d'eau due à l'action capillaire W0 Wasserabsorption durch Kapillarwirkung Penetrazione dell’acqua dopo la prova di assorbimento d’acqua per capillarità Water penetration after capillary absorption test 6 Pénétration d'eau après test d'absorption NPD capillaire UNI EN Wasserdurchdringung nach 998-1:2010 Kapillarabsorptionstest Permeabilità all’acqua su substrati pertinenti dopo cicli di gelo/disgelo su calcestruzzo (2 cm) su muratura (2 cm) Water permeability after freeze / thaw cycles on concrete on clay masonry 7 Perméabilité à l'eau après cycles de sur le béton 1,9 sur maçonnerie 3,0 congélation / décongélation auf beton ml/cm2*48h auf Mauerwerk ml/cm2*48h Wasserdurchlässigkeit nach Frost- / Tau-Zyklen Permeabilità al vapore d'acqua Water vapour pemeability 8 Diffusion de vapeur d'eau ≤ 7,2 Wasserdampfdurchlässigkeit Conducibilità Termica = 0,50 W/mK (P=50%) 9 Thermal conductivity = 0,57 W/mK (P=90%) Conductivité thermique Wärmeleitfähigkeit (P = % umidità dello strato di malta) Resistenza al fuoco Fire resistance 10 Résistance au feu A1 Feuerwiderstands Durabilità 11 Durability vedere/ see/ voir/ siehe Durabilité 3, 5 Haltbarkeit Sostanze pericolose Non contiene sostanze pericolose Dangerous substances It does not contain hazardous substances 12 Substances dangereuses Il ne contient pas de substances dangereuses Gefahrstoffe Dabei spielt es keine gefährlichen Stoffe enthalten
Ideal Work Srl
Via Kennedy, 52 – 31030 Vallà di Riese Pio X (TV) – Italia Cod. Fiscale, P. IVA e Reg. Impr TV 03293380261 - Cap. Soc. € 45.900,00 i.v. Tel **39 0423 4535 Fax **39 0423 748429 www.idealwork.it info@idealwork.it Ideal Work DoP n 001 998-1_01 Ideal Wall 20130429_Rev 2017.11.1 è conforme alla prestazione La prestazione del prodotto tipo Numero di tipo dichiarata 998-1/01 is in conformity with the The performance of the product 998-1/01 Type 20130429 declared performance ci-dessus sont conformes aux Les performaces du produit Type performances déclarées
Si rilascia la presente Dichiarazione di Prestazione sotto la responsabilità di
This Declaration of Performance is issued under the sole responsibility of IDEALWORK Srl La prèsente declaration des performances est établie sous la seule responsabilité di
Il Responsabile del Controllo di Produzione in Fabbrica
The Head of Factory Production Control Maurizio Pontello Le responsable du contrôle de production
Vallà di Riese Pio X (TV),14/11/2017
Le edizioni precedenti sono disponibili c/o Ideal Work srl. Previous releases available at Ideal Work srl
Ideal Work Srl
Via Kennedy, 52 – 31030 Vallà di Riese Pio X (TV) – Italia Cod. Fiscale, P. IVA e Reg. Impr TV 03293380261 - Cap. Soc. € 45.900,00 i.v. Tel **39 0423 4535 Fax **39 0423 748429 www.idealwork.it info@idealwork.it Ideal Work DoP n 001 998-1_01 Ideal Wall 20130429_Rev 2017.11.1