Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
C
D
E
F F
G
L S L
COMPOGEAR una serie di giunti composti da due mozzi a COMPOGEAR is a series of coupling consisting of two steel,
dentatura bombata, in acciaio 2 che ingranano su una slitta in crowned teeth hubs 2 , wich are connected with a polyamide
poliammide 1 dentata internamente. Il particolare disegno internally toothed sleeve 1 . The special new design of the
bombato della dentatura dei mozzi e la combinazione acciaio- crowned teeth hubs and the lubrication free combination of steel
poliammide permette di lavorare senza usura e quindi senza with polyamide ensure good sliding properties and leads to low
lubrificazione e manutenzione anche in presenza di importanti maintenance and low wear operation, also with important axial,
disallineamenti assiali, angolari, radiali degli alberi da collegare. angular and radial misalignment of the shafts. COMPOGEAR is
COMPOGEAR resistente a tutti i lubrificanti e fluidi idraulici e pu resistant to all types of lubricants and hydraulic fluids and can be
essere impiegato in una gamma di temperature da -25C a +80C. used at a temperature range of -25C +80C.
Per una corretta selezione del giunto COMPOGEAR, le coppie For a correct selection of the COMPOGEAR coupling, the nominal
nominali devono essere declassate del fattore di servizio fs. torque must be derated by the fs service factor. The maximum
Inoltre la coppia di spunto non pu superare la coppia massima starting torque must not exceed the maximum torque of the
del giunto. Coppie uniformi e alberi ben allineati consentono coupling. With constant torque and well alligned shafts,
l'utilzzo del giunto fino alla coppia massima. Disallineamenti COMPOGEAR can be used up to the maximum torque. The
massimi e velocit massime non possono coesistere maximum misalignment and the maximum speed cannot co-exist
contemporaneamente e cos la presenza di un disallineamento at the same time; therefore the presence of misalignment reduces
riduce le velocit massime, secondo la tabella. the possibility of maximum speed, as indicated in the table.
100
90
Velocit in % del valore massimo.
Speed in % of maximum value.
80
70
60
50
40
30
20
20 30 40 50 60 70 80 90 100
Disallineamento angolare o radiale in % del valore max.
Radial and angular misalignment in % of maximum value.