Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
POLIETILENE
POLYETHYLENE
PE
Il Polietilene a bassa densit pu essere utilizzato in una gamma ristretta di temperature comprese tra i -10C e +60C. I tubi C.Eco in Polietilene per le applicazioni della pneumatica industriale vengono estrusi con due gradi di densit: 1. Bassa Densit: PE LD 2. Alta Densit: PE HD
Polyethylene tube can be used within a restrictive range of temperatures from -10C to +60C. C.Eco tubes made of Polyethylene for pneumatic applications are proposed with two level of density: 1. Low Density: PE LD 2. High Density: PE HD
1.
PE LD
0 Interno
0 Inside
0 Esterno
0 External
Spessore
Thickness
Raggio di curvatura
Bending Radius
4 mm 6 mm 8 mm 10 mm 12 mm 12 mm 12 mm 14 mm 16 mm
2 mm 4 mm 6 mm 8 mm 10 mm 9 mm 8 mm 10 mm 12 mm
1 mm 1 mm 1 mm 1 mm 1 mm 1,5 mm 2 mm 2 mm 2 mm
18 mm 30 mm 40 mm 60 mm 80 mm 65 mm 60 mm 80 mm 100 mm
TOLLERANZA
TOLERANCE
TEMPERATURA DUSO
TEMPERATURE RANGE
Le nostre tolleranze sul diametro esterno sono: Dal 3 mm al 10 mm : +/- 0,07 mm Dal 11 mm al 22 mm : +/- 0,1 mm
Tolerance on external diameter: From 3 mm to 10 mm : +/- 0,07 mm From 11 mm to 22 mm : +/- 0,1 mm
Da -10C a +60C
From -10C to +60C
RESISTENZE CHIMICHE
Chemical Resistance
100%
83%
LUNGHEZZA MATASSA
72% 64% 57%
Roll Size
20C
30C
40C
50C
60C
MARCATURA
MARKING
CONFEZIONAMENTO
packaging
Il nostro standard con film di polietilene. Per le altre tipologie di packaging consultare la pagina 56.
Our standard is with polyethylene film around. For other kinds of packaging check page 56.
30
PE
GAMMA COLORI
COLOUR RANGE
Per il PE LD:
For PE LD:
nt
NR
AZ
RO
GI
Giallo Yellow
VE
Verde Green
La Castello Italia con un minimo dordine di 3.000 m in grado di offrirvi tubi di colori personalizzati secondo tabella RAL.
Castello Italia upon request can offer custom colours following RAL specification for a minimum delivery of 3.000 m.
I valori ed i coefficienti indicati nelle tabelle riportate su questo catalogo sono puramente indicativi, non sono vincolanti per Castello Italia srl e non comportano elemento di responsabilit a carico della stessa in caso di difformit rispetto a dette tabelle, ovvero in caso di erroneo impiego del prodotto da parte del Cliente. The values and coefficients contained in this document are for information only and shall in no event be held to constitute or imply any warranty, undertaking, express or implied commitment. No liability whatsoever can be accepted by Castello Italia Srl with respect to difference to the values reported in the tables or misuse by the Customer of the products.