Sei sulla pagina 1di 71
[e) ICOM SERVICE MANUAL WIDEBAND RECEIVER IiC-—R7100 Icom Inc. INTRODUCTION This service manual describes the latest service infor: mation for the 1C-R7100 WIDEBAND RECEIVER at the time of publication, 5 versions of the IC-R7100 have been designed. This service manual covers each version VERSION NO.[ VERSION | SYMBOL B02 USA USA, 03 Europe eu 08 “Ausvalia AUS B05 Germany | B08 France FRA To upgrade quality, all electrical er mechanical parte ‘and internal circuits are subject to change without notice or obligation DANGER Use ONLY the specified AC voltage described on the AC power socket. Other voltages will cause receiver ‘damage or personal injury. DO NOT touch the REG UNIT after the receiver is connected to an AC outlet. An insulated tool must be used at all times, DO NOT expose the receiver to rain, snow oF any liquids. DO NOT apply an AF signal of more than 100 mW. (20 dBm) to the antenna connector. This could damage the receiver's front-end, ORDERING PARTS Be sure to include the following four points when ordering replacement paris: 10-digt order numbers ‘Component part number and name Equipment model name and unit name ‘Quantity required 1110001360 1¢yPCI2AAH—_ICATIOOMANUNIT Spices fasr0003610 Screw FHMSX62K8S ICRTIOOTopcoer YOpieces Addresses are provided on the inside back cover for your convenience. REPAIR NOTES 1, Make sure a problem is internal before disassembling the receiver. 2 DO NOT open the receiver until the receiver is

Potrebbero piacerti anche