FT-530
Belek Dual Band Hand-Held
Paging Transceiver
CN KB2L
Radio Mods DatabaseContents
Specifications... .
Accessories & Options List... «
Controls & Connectors»...
Panel Controls
Key Functions
Accessories
Batteries & Chargers
DC-Adapter & Batteries
Speaker/Mics and Headset Accessories
‘Antenna Considerations
Operation
Preliminary Steps
Frequency Selection Modes
Keypad, PTT & Dial Locking
‘Squeleh Setup
Frequency & Step Selection
‘Tuning & Transmitter Power Selection
Selecting Earphone Audio
Mixed (VHF&VHE, UHF&UHP Receive
‘Transmitting
Repeater Splits
Setting Standard Repeater Offset
Automatic Repeater Shift (ARS)
Intelligent Band Selection (BS)
Cross Band Repeat Function
Table of Contents
‘Simple Memory Storage
seeeee 4 Recalling Memories
ae 3 CallChannel Memory
Seg Tuning & Masking Memories
town —_ Seanning
Memory Skip Scanning
Programmable Subband Limits
2
13 Paority Channel Monitoring
1s AMReceive
15 CTCSS Operation
47 CECSS Tone Scanning
yz CTCSS "Bell" Paging,
19 DIMFPaging & Code Squetch
3 Individual & Group Codes
21 ‘Trigger Peger
21 DIMF Autodial Memories
2 Ringer Settings
24 DIMFSettings
24 Clack & Timer Functions
25 Extending Battery Life .......
25 xutomatic Power Off (APO)
y InCase Of Problems ......-«
23 _Resetting the CPU & Memory Backup
28 Packet Setup... .
SRSSSRSCREBRRE SSEFT-530 Dual-Band Hand-Held FM Paging Transceiver
The FT-530 is a deluxe compact FM hand-held
for the 2-meter and 70-cm amateur bands, provid-
ing the latest capabilities of dual-microprocessor
control, and including dual, separate receivers.
‘Transmitter power output is user-selectable in four
levels, up to 5 watts (when used with a 12-volt
battery pack or DC supply). The FT-530 offers a
multitude of battery preserving features, a 10-
memory, 15-digit DTMF (Dual-Tone, Multi-Fre-
quency) autodialler; CTCSS (Continuous
Tone-Controtled Squelch System) scanning and a
wealth of selective calling/paging features to en-
hance FM communication,
The sculpted die-cast alloy rear case/heat sink
and thick high-impact polycarbonate plastic front
panel provide professional-grade ruggedness ideal
for demanding applications. The display and trans-
lucent keypad have selectable lighting modes. The
display includes dual, 5-14 digit frequency re-
adouts and indicators for most programmable
functions, plus relative signal strength and power
output on separate bargraph meters. A DC supply
jjack is provided on the top panel for powering the
transceiver from an external DC source, and
also charge a 7.2-V Ni-Cd battery pack connected
to the transceiver. The easily accessible lithium
backup battery is now replacable without having
to open the case. VOX circuitry with adjustable
gain/delay is included for hands-free transmit/re-
ceive control with the optional YH-2 headset.
‘Two independent VFOs and 41 freely tunable
memories per band are completely programmable
from the 20-key keypad; for scanning, inde-
pendent tx/rx frequencies or programmable off-
sets, subband limits for band scanning, selectable
scan skip for busy channels, selectable scan re-
sume modes, priority monitoring and dual instant-
recall CALL channels. In addition, dual receive on
different bands, or even on two frequencies in the
same band, is possible using main and sub-band
receiver VFOs.
Seven standard channel step sizes can be se-
lected; and 1-MHz steps are always available.
Automatic Repeater Shift (ARS) can be enabled to
set standard repeater shifts automatically when
tuned to a standard repeater subband. A 1750-Hz
Introduction