[e)
ICOM
INSTRUCTION MANUAL
144 MHz FM TRANSCEIVER,
IC—281H
IC-—281A
IC—-281E
Icom Inc.IMPORTANT
CAUTIONS
READ ALL INSTRUCTIONS caretully and com-
pletely before using the transceiver.
SAVE THIS INSTRUCTION MANUAL - This
instruction manual contains important safety and operating
instructions for the IC-281H/AIE.
FOREWORD
The IC-281H/NE is a compact, easy-to-operate, mult-
function transceiver designed using Icom’s state-of-the-art
technology. It is operational on the 144 MHz band and has
a 430(440) MHz receiving capability
NOTE: See “Unpacking” on p. 55 for included acces-
NEVER connect the transceiver to an AC outlet or to a.
Power source of more than 16 V DC. These connections
will ruin the transceiver.
NEVER connect the transceiver to a power source using
reverse polarity. This connection will run the transceiver.
NEVER piace the transceiver where normal operation of,
the vehicle may be hindered or where it could cause bodily
injury.
NEVER allow children to touch the transceiver.
DO NOT use or place the transceiver in areas with
temperatures below 10°C (+14°F) or over +60°C
(+140°F ) or, in areas subject to direct sunlight, such as the
dashboard,
AVOID the use of chemical agents such as benzene or
alcohol when cleaning, as they can damage the transceiver
surfaces,
BE CAREFUL! The transceiver will become hot when
operating the transceiver continuously for long periods.TABLE OF CONTENTS
ImpoRTANT
FOREWORD
ERUTIONS
SABLE OF CONTENTS ‘
PANEL DESCRIPTION
IMFron panel
Hi Functon display
ear pane!
Hicephone
Packet connection
2 INSTALLATION
Batery eomecion
OC power subpy connection
Hi Arenna staan
3 MODE ARRANGEMENT CHART
4 SETTING A FREQUENCY
Tuning step seecton
Using (UPHON] switches
Leck tuncton
‘5 BASIC OPERATION
Receiving
Monto funeton
Recowe band
ranemting
Setecng the output power
rossband tl dupler
6 REPEATER OPERATION
Operation
Staub one
Mf requency
7 MEMORY OPERATION
Genera description
[Memory channel oeecton
[Progamming s memory channel
WTaanstering memory cortens
WMomery area seting
MiMomery ane! aleeaton
WAtro channel advance
® CALL CHANNEL OPERATION
alin up a eal channel
ranteng aca channel conten
Programming a eal chanel
9 SCRATCH PAD MEMORY
‘mWinat ie asratch pad memory
Cating up a src pa memory
10SCAN OPERATION
Scan types
Ful scan ond programmed san
Programing san edges
Scan wage selection
Memory sean
Skip channel seting
I Scan resume condtion
11 PRIORITY WATCH
Prory watch pes
Promy wath operation
12 PAGER AND CODE SQUELCH
[General description
]Code programming
ger operation
Code squcet operation
35-38
13 POCKET BEEP AND
TONE SQUELCH 30
Pocket beep operation 2
Tone eqveeheporaton 2
14UP SWITCH REMOTE 40
(W Asegnig a fonction tothe (UPL ewach 10
15 MIC DTMF REMOTE aaa
16DTMF MEMORY OPERATION 43-46
1 Ceneral 2
Hiloce typos 2
MiWiring& DTHE memory 3
I Tranamiting memory cata a
ang tory Sls a
17 OTHER FUNCTIONS 47-50
Dislay dimmer setng 7
Beep tone nit
'Tme-oxt tier
Ato power at
Optional voice synthesizer
Demonetaten dplay
1H Optional unt instalation
8 MAINTENANCE, S153
Troubleshooting 31
Fuse replacement 2
Bec tateres 8
Patel ose 3
19 SPECIFICATIONS sa
200PTIONS 55-56
Unpscting 38