Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
(*) Per impieghi diversi contattare il Ns. Ufficio Tecnico (*) For any special duty please contact our technical dept.
(**) Contattare il Ns. Ufficio Tecnico (**) Contact our technical dept.
ALI2-P (Vdc)
Fmax Velocità Versione Taglia motore Giri motore 1° Rid. 2° Rid. D vite Passo Rendimento Corsa max (mm)
Fmax Speed Version Motor size Motor speed 1° Red. 2° Red. Screw D Pitch Efficiency Max stroke [mm]
(N) (mm/s) (rpm) (mm) (mm) ALI2-P-F ALI2-P
2400 30 M01 61.5 4000 1:5 1:5 16 12 0.38 690 690
2600 20 M02 61.5 4000 1:5 1:5 16 8 0.28 580 655
3000 15 M03 61.5 4000 1:5 1:7 16 8 0.25 580 615
4200 10 M04 61.5 4000 1:5 1:5 16 4 0.24 290 545
4200 7 M05 61.5 4000 1:5 1:7 16 4 0.21 290 545
4200 5 M06 61.5 4000 1:5 1:10 16 4 0.18 290 545
4200 2.5 M07 61.5 4000 1:5 1:21 16 4 0.18 290 545
4200 1.2 M08 61.5 4000 1:10 1:21 16 4 0.14 290 545
4200 0.6 M09 61.5 4000 1:21 1:21 16 4 0.13 290 545
edizione - edition
37
09/2014
ALI2-P
attuatore senza fine corsa / actuator without limit switches
ali2-p
+0.1
79.5 Ø10 0
73
13 9 57.5
43
21.5
1
Ø36
43
105.5
112.6
52
91.1
Ø25
Ø61.5
+0.1
0Ø10
23 150
20
45 A
13 B 10
41.5
attuatore con fine corsa integrato / actuator with integrated limit switches
ali2-pf
102.5
13 9 76
+0.1
Ø10 0
21.5
1
45
Ø25
Ø36
43
157.6
112.6
52
105.5
+0.1
91.1
0
Ø61.5
Ø10
22
45 23 150 20
68 A 55
13 B 10
73
35 76
41.5
A 67 + corsa/stroke 77 + corsa/stroke
B 135 + corsa/stroke 145 + corsa/stroke
98
edizione - edition
38
09/2014 Per prodotti non contemplati, contattare il nostro Ufficio Tecnico / For products not listed, please contact our Tecnical Department
ALI2-P
SIGLA DI ORDINAZIONE - ORDERING KEY
ALI2P / 0250 / M01 / 59-24 / 2FC0 / P0T01A / E01 / M0FC1 / IP65 / AR0 / P1 / A1 / A+B / N.DIS
MODELLO / MODEL:
ALI2-P ALI2-PF
ALI2-P-FCM
CORSA / STROKE: mm
es. 250 mm = 0250
VELOCITÀ / SPEED: tabella / table (Pag. 37)
M01 / M02 / M03 / M04 / M05 / M06 / M07 / M08 / M09
M00 = Velocità non contemplate / Not standard speed
MOTORE / MOTOR: (disponibile / available)
Grandezza / Size: D 61,5
Tensione / Voltage: V12 / 24
FINE CORSA / LIMIT SWITCHES: (Pag. ACCESSORI/ ACCESORIES)
Senza / None: Omettere / Leave blank
POTENZIOMETRO / POTENTIOMETER: (Pag. ACCESSORI/ ACCESORIES)
Senza / None: Omettere / Leave blank
ENCODER / ENCODER: (Pag. ACCESSORI/ ACCESORIES)
Senza / None: Omettere / Leave blank
ORIENTAMENTO MOTORE E FINE CORSA / LIMIT SWITCHES POSITION: (Pag. 40)
Senza / None: Omettere / Leave blank M0FC1 / FC2 / FC3 M1FC1 / FC2 / FC3
GRADO PROTEZIONE / PROTECTION CLASS:
IP65 standard Altro / Other: Specificare / Advise
DISPOSITIVO ANTIROTAZIONE / ANTIROTATION DEVICE: (Pag. ACCESSORI/ ACCESORIES)
Senza / None: Omettere / Leave blank AR0: Std AR1: 90°
ATTACCO POSTERIORE / REAR END: (Pag. 40)
P0 = Senza / None P2 = Occhio / Eyelet (90°)
P1 = Occhio / Eyelet (standard) P3 = Attacco a Disegno / Special (provide drawing)
ATTACCO ANTERIORE / FRONT END: (Pag. 41)
A0 = Senza / None A4 = Testa a Snodo / Rod end
A1 = Occhio / Eyelet (Std) A6 = Femmina M12 / M12 female
A2 = Forcella Fissa / Yoke A7 = Maschio M10 / M10 male
A3 = Forcella + Clip / Yoke + Clip A9 = Attacco a Disegno / Special (provide drawing)
OPZIONI / OPTIONS:
Senza / None: Omettere / Leave blank A = Versione Inox (asta, attacco anteriore) / Stainless steel version (rod, front end)
C = Vite Scoperta / Naked Screw D = Ruota in Bronzo / Bronze wheel B = Protezione soffietto / Bellows boot
FX = Verniciatura Protettiva Steel It / Protective Painting Steel It FXC = Cataforesi / Protective treatment Cataphoresis
G = Chiocciola di sicurezza (brevettata) / Safety nut (patented) T = Albero opposto motore / Additional shaft (opposite to motorside)
L = Antirotazione / Anti-rotation device Z = Versione bassa rumorosità / Low noise version
VARIANTI / VERSIONS:
N° Disegno / Drawing number: Per Condizioni non Contemplate / Presence of not standard options
Senza / None: Omettere / Leave blank
edizione - edition
39
Per prodotti non contemplati, contattare il nostro Ufficio Tecnico / For products not listed, please contact our Tecnical Department 09/2014
ALI2-P
P2
P1
A4
A3
A7
A6
A2
A1
ATTACCHI ANTERIORI FRONT ENDS
+0.1 +0.1 +0.1
Ø10 0 Ø10 0 Ø10 0 Ø12 H7
Ø25
Ø25
8
24
A1 = OCCHIO (STANDARD) A2 = FORCELLA FISSA
A1 = EYELET (STANDARD) A2 = YOKE
+0.1 +0.1
Ø30
Ø10 Ø10 H8 Ø10 Ø10 H7
20
0 0
14
20
10.5
A3 = FORCELLA CON CLIP DIN 71752 / UNI 1676 A4 = TESTA A SNODO DIN 648 serie K / UNI 6126
A3 = YOKE WITH CLIP DIN 71752 / UNI 1676 A4 = ROD END DIN 648 serie K / UNI 6126
+0.1
+0.1
Ø10 0
Ø10 0 15
M12
13 B = 122 + corsa/stroke
13 B = 122 + corsa/stroke 32
Ch.19
Ch.19
M10
ALI2-P = vedi figure / see pictures Con Chiocciola di sicurezza “G” = + 30 mm / With safety nut “G” = + 30 mm
ALI2-P corsa / stroke > 320 mm = + 10 mm Protezione Soffietto/ Bellows + 20mm ( escluso versioni FCM / no for versions FCM )
ALI2-PF = + 23 mm
ALI2-PF corsa / stroke > 320 mm = + 33 mm
ALI2-P-FCM = + 33 mm
ALI2-P-FCM corsa / stroke > 320 mm = + 43 mm
edizione - edition
40
09/2014
ALI2-P
ATTACCO POSTERIORE / REAR ENDS ORIENTAMENTOMOTORE / MOTOR SIZE
P1 P2 M0 M1
(Standard) Ruotato di 90° / Rotated through 90°
173 (X 4 FC)
8
121
113
73 73
12 20
123 (X 4 FC) 125 (X 4 FC)
125 (X 4 FC
108 (X 3 FC) 110 (X 3 FC)
110 (X 3 F
158 (X 3 FC)
173 (X 4 FC)
158 (X 3 FC)
173 (X 4 FC)
8
8
121
121
1 2 2 1
4 4
1 2 2 1 2 1
4 4 4
1 2 2 1
4 4
edizione - edition
42
09/2014 Per prodotti non contemplati, contattare il nostro Ufficio Tecnico / For products not listed, please contact our Tecnical Department
ALI2-P
Diagrammi di corrente - Current diagram Diagrammi di velocità - Speed diagram
Taglia motore 61,5 - 61,5 Motor size Taglia Motore 61,5 - 61,5 Motor size
10,0 35
9,0
M01 30
8,0
25 M04
7,0 M02 M04 M01
6,0 M03 M05
M05 20
5,0 M02
M06 15 M06
4,0 M07 M03
3,0 M08 10 M07
2,0 M09
5 M08
1,0
M09
0,0 0
0 500 1000 1500 2000 2500 3000 3500 4000 4500 0 500 1000 1500 2000 2500 3000 3500 4000 4500
Carico (N) / Load (N) Carico (N) / Load (N)
Diagrammi riferiti alla tensione di alimentazione 24Vdc. Diagrams valid for 24Vdc power supply.
Per tensione 12Vdc raddoppiare il valore di corrente e ridurre il For 12Vdc power supply currents are doubled and loads are 20%
valore di carico del 20%. lower.
edizione - edition
43
Per prodotti non contemplati, contattare il nostro Ufficio Tecnico / For products not listed, please contact our Tecnical Department 09/2014
note notes
edizione - edition
44
09/2014