Gun Digest Book of Revolvers Assembly/Disassembly, 4th Ed.
5/5
()
About this ebook
Shooters, gunsmiths and collectors alike will find the revised version of this handy gun disassembly guide an essential reference for taking apart and putting back together today's most popular revolvers for routine maintenance and cleaning.
Step-by-step photographs of popular models along with clear, simple text make it easy to disassemble and reassemble a wide range of modern and vintage revolvers. Plus, author Kevin Muramatsu's decades of gunsmithing experience shine through in practical tips that help you overcome specific reassembly hurdles for each model--those frustratingly tricky parts that can leave your wheelgun in pieces on the workbench.
With an additional twenty of the most popular revolvers on the market, this comprehensive resource now covers 75 models and more than 150 variants!
Models added to this revised edition include:
- Taurus Judge
- Chiappa Rhino
- Kimber K6s
- Ruger New Bearcat
- Armscor 206
- EAA Windicator
- Rossi 352, 452, 971
- Taurus 85 Polymer
- DoubleTap pocket pistol
- Heizer Pocket AR
- Trailblazer Life-Card
- Maybe something from Cimarron, NAA, S&W, and Charter
Kevin Muramatsu
Gunsmith Kevin Muramatsu has authored numerous books including, Gun Digest Guide to Customizing Your AR-15, Exploded Gun Drawings and Gun Digest Guide to Maintaining and Accessorizing Firearms, as well as the Gun Digest series of Assembly/Disassembly titles for pistols, revolvers, centerfire rifles, tactical weapons and shotguns.
Read more from Kevin Muramatsu
The Gun Digest Book of Rimfire Rifles Assembly/Disassembly: Step-by-Step Photos for 74 Models & 228 Variables Rating: 0 out of 5 stars0 ratingsGun Digest Book of Shotguns Assembly/Disassembly, 4th Ed. Rating: 0 out of 5 stars0 ratingsGun Digest Guide to Customizing Your AR-15 Rating: 0 out of 5 stars0 ratingsGun Digest Book of Automatic Pistols Assembly/Disassembly Rating: 3 out of 5 stars3/5The Gun Digest Book of Tactical Weapons Assembly/Disassembly, 2nd Ed. Rating: 0 out of 5 stars0 ratingsGun Digest Book of Tactical Weapons Assembly/Disassembly, 3rd Ed. Rating: 5 out of 5 stars5/5Gun Digest Guide to Maintaining & Accessorizing Firearms Rating: 4 out of 5 stars4/5Gun Digest Book of Centerfire Rifles Assembly/Disassembly, 4th Ed. Rating: 0 out of 5 stars0 ratingsGun Digest Book of Rimfire Rifles Assembly/Disassembly, 5th Edition Rating: 5 out of 5 stars5/5Gun Digest Book Of Rimfire Rifles Assembly/Disassembly Rating: 5 out of 5 stars5/5Gun Digest American Arms ATI GSG-5 Assembly/Disassembly Instructions Rating: 0 out of 5 stars0 ratings
Related to Gun Digest Book of Revolvers Assembly/Disassembly, 4th Ed.
Related ebooks
Gun Digest Book of Rimfire Rifles Assembly/Disassembly, 5th Edition Rating: 5 out of 5 stars5/5Gun Digest Book Of Rimfire Rifles Assembly/Disassembly Rating: 5 out of 5 stars5/5Gun Digest Book of Centerfire Rifles Assembly/Disassembly, 4th Ed. Rating: 0 out of 5 stars0 ratingsThe Gun Digest Book of Revolvers Assembly/Disassembly Rating: 0 out of 5 stars0 ratingsGunsmithing Pistols & Revolvers Rating: 4 out of 5 stars4/5The Gun Digest Book of Firearms Assembly/Disassembly Part V - Shotguns Rating: 5 out of 5 stars5/5Gunsmithing: Rifles, 9th Edition Rating: 4 out of 5 stars4/5Gunsmithing the AR-15, Vol. 4: Building the Performance AR Rating: 3 out of 5 stars3/5The Gun Digest Book of the AR-15, Volume 4 Rating: 5 out of 5 stars5/5The Gun Digest Book of the AR-15 Rating: 0 out of 5 stars0 ratingsModern Custom Guns: Walnut, Steel, and Uncommon Artistry Rating: 0 out of 5 stars0 ratingsGunsmithing - Rifles Rating: 0 out of 5 stars0 ratingsDo-It-Yourself Gun Repair: Gunsmithing at Home Rating: 2 out of 5 stars2/5Gunsmithing the AR-15, Vol. 2 Rating: 4 out of 5 stars4/5Gun Digest Book of Tactical Weapons Assembly/Disassembly, 3rd Ed. Rating: 5 out of 5 stars5/5Gunsmithing the AR-15, Vol. 3: The Bench Manual Rating: 3 out of 5 stars3/5The Handloader's Manual of Cartridge Conversions Rating: 5 out of 5 stars5/5The Gun Digest Book of Tactical Weapons Assembly/Disassembly Rating: 0 out of 5 stars0 ratingsThe Gun Digest Book of Firearms Assembly/Disassembly Part IV - Centerfire Rifles Rating: 0 out of 5 stars0 ratingsReloading for Handgunners Rating: 4 out of 5 stars4/5Building a Home Defense Remington 870 Shotgun Rating: 4 out of 5 stars4/5The Gun Digest Book of Rimfire Rifles Assembly/Disassembly Rating: 0 out of 5 stars0 ratingsThe Gun Digest Book of the Tactical Rifle: A User's Guide Rating: 2 out of 5 stars2/5Antique Firearms Assembly/Disassembly: The comprehensive guide to pistols, rifles & shotguns Rating: 5 out of 5 stars5/5Glock Reference Guide, 2nd Edition Rating: 0 out of 5 stars0 ratingsHandbook of Reloading Basics Rating: 4 out of 5 stars4/5Gunsmithing: Shotguns: Shotguns Rating: 0 out of 5 stars0 ratingsThe Gun Digest Book of the Tactical Shotgun Rating: 0 out of 5 stars0 ratings
Shooting & Hunting For You
Endure: How to Work Hard, Outlast, and Keep Hammering Rating: 5 out of 5 stars5/5Deadly Force: Understanding Your Right to Self-Defense, 2nd edition Rating: 4 out of 5 stars4/5Outdoor Survival Guide: Survival Skills You Need Rating: 5 out of 5 stars5/5Prepared: The 8 Secret Skills of an Ex-IDF Special Forces Operator That Will Keep You Safe - Basic Guide Rating: 5 out of 5 stars5/5Concealed Carry Class: The ABCs of Self-Defense Tools and Tactics Rating: 0 out of 5 stars0 ratingsSurvival Skills of the Native Americans: Hunting, Trapping, Woodwork, and More Rating: 0 out of 5 stars0 ratingsA Fine and Pleasant Misery Rating: 4 out of 5 stars4/5The ABC's of Reloading, 10th Edition: The Definitive Guide for Novice to Expert Rating: 5 out of 5 stars5/5Deadly Force - Understanding Your Right To Self Defense Rating: 5 out of 5 stars5/5The Trapper's Bible: The Most Complete Guide on Trapping and Hunting Tips Ever Rating: 5 out of 5 stars5/5The Total Outdoorsman Skills & Tools: 324 Tips Rating: 5 out of 5 stars5/5Happy, Happy, Happy: My Life and Legacy as the Duck Commander Rating: 4 out of 5 stars4/5An Illustrated Manual of Sniper Skills Rating: 4 out of 5 stars4/5The Ultimate Guide to Home Butchering: How to Prepare Any Animal or Bird for the Table or Freezer Rating: 0 out of 5 stars0 ratingsAmerican Hunter: How Legendary Hunters Shaped America Rating: 0 out of 5 stars0 ratingsThe Practical Guide to Guns and Shooting, Handgun Edition: Practical Guides, #1 Rating: 5 out of 5 stars5/5The Total Bowhunting Manual: 261 Essential Skills Rating: 4 out of 5 stars4/5unPHILtered: The Way I See It Rating: 4 out of 5 stars4/5Guns 101: A Beginner's Guide to Buying and Owning Firearms Rating: 4 out of 5 stars4/5The Total Gun Manual: 335 Essential Shooting Skills Rating: 0 out of 5 stars0 ratingsPrepper Guns: Firearms, Ammo, Tools, and Techniques You Will Need to Survive the Coming Collapse Rating: 5 out of 5 stars5/5The Ultimate Shooting Skills Manual: 212 Essential Range and Field Skills Rating: 3 out of 5 stars3/5Crafts and Skills of the Native Americans: Tipis, Canoes, Jewelry, Moccasins, and More Rating: 4 out of 5 stars4/5Si-cology 1: Tales and Wisdom from Duck Dynasty's Favorite Uncle Rating: 4 out of 5 stars4/5The Prepper's Guide to Firearms Rating: 3 out of 5 stars3/5Camping 101!: A Beginners Guide with Campfire Recipes and Hacks That Will Make Your Adventure Fun!: Camping and Backpacking Rating: 0 out of 5 stars0 ratingsThe Art and Practice of Hawking Rating: 0 out of 5 stars0 ratingsDeath in the Long Grass: A Big Game Hunter's Adventures in the African Bush Rating: 4 out of 5 stars4/5
Reviews for Gun Digest Book of Revolvers Assembly/Disassembly, 4th Ed.
1 rating0 reviews
Book preview
Gun Digest Book of Revolvers Assembly/Disassembly, 4th Ed. - Kevin Muramatsu
Armscor Model 200
Similar/Identical Pattern Guns
The same basic assembly/disassembly steps for the Astra 357 also apply to the following gun:
Armscor handguns are imported by Rock Island Arsenal and include a variety of 1911-style pistols and a few revolver designs that are almost identical. The 4-inch barrel of the 200 is what differentiates it from the snubby 206. Very inexpensive, both are solid steel revolvers.
Disassembly:
1. Remove the grip panels from the frame by unscrewing the grip screw and pulling the panels off to either side.
2. Open the cylinder and remove the screw on the right side of the frame.
3. Pull the crane forward out of the frame.
4. To disassemble the cylinder, first unscrew the ejector knob. This will allow the crane to be pulled forward off the ejector rod. Further disassembly outside the factory may result in damage to the cylinder assembly."
5. Remove the two screws from the left side of the frame, then lift the side panel up and off by tapping the frame with a screwdriver handle or soft-faced hammer. Push the cylinder latch button forward out of the sideplate.
6. Lift the silver transfer bar and the cylinder hand located in front of the transfer bar out of the frame. The long elbow spring should remain staked into the transfer bar.
7. Cock the hammer and insert a thin tool into this hole in the hammer strut.
8. Release the hammer to remove compression and pull the assembly out of the frame. Note that the orientation of the plate holds the strut closer to the grip’s rear strap than it does the front strap.
9. Lift the hammer out of the frame. If necessary, the hammer can be disassembled. Do not lose the spring.
10. Lift the trigger out of the frame.
11. Push the cylinder lock nose down into the frame and pull it out to the side. Don’t lose the spring.
12. Remove the cylinder latch to the rear.
13. Drive out this contoured pin to remove the firing pin and spring.
14. The trigger spring can be removed by simply pulling it out of the frame. Note that it is still tensioned. Don’t lose the small auxiliary coilspring on the forward pointing leg.
Reassembly Tips:
1. Insert the trigger with a tool holding the front leg of the trigger spring elevated. Lift the leg high enough to slide into its slot in the right wall of the trigger as the trigger is inserted.
A Note on Reassembly
Most of the revolvers covered in this book can be reassembled by simply reversing the order of disassembly, carefully replacing the parts in the same manner they were removed. In a few instances, special instructions are required, and these are listed above. In certain cases, reassembly photos are also provided.
If there are no special instructions or photos with a particular gun, you may assume that it can just be reassembled in reverse order. During disassembly, note the relationship of all parts and springs, and lay them out on the workbench in the order they were removed. By following this procedure you should have no difficulty.
Astra 357
Similar/Identical Pattern Guns
The same basic assembly/disassembly steps for the Astra 357 also apply to the following gun:
Astra-Unceta y Compania introduced its .357 Magnum revolver in 1972, and in 1980 a heavier version was offered in .44 Magnum. They are mechanically the same. While there is a similarity to Smith & Wesson design, there are important internal differences. In both chamberings, the guns were available in several barrel lengths. Interarms was the U.S. importer.
Disassembly:
1. Remove the grips, and take out the forward sideplate screw.
2. Remove the crane and cylinder assembly toward the front. Remove the crane from the cylinder.
3. The ejector rod has a reverse thread. It unscrews clockwise, front view. If it is not too tight, it can be removed as shown, with leather-padded pliers. If it is tight, grip the rod in a leather-padded vise, insert two empty cartridge cases in opposed chambers to protect the guide spline, and turn the cylinder.
4. Remove the ejector rod toward the front.
5. Remove the spring bushing and spring toward the front.
6. Remove the locking rod and its spring toward the front.
7. Remove the ejector/ratchet unit toward the rear.
8. With a screwdriver of proper dimensions, remove the other three sideplate screws. Note that the upper screw will require a wider blade.
9. With the gun held as shown, tap the grip frame with a non-marring mallet until the sideplate drops into the hand.
10. The safety-block bar will likely come off with the sideplate. Remove it from its recess.
11. Push the hammer spring base ring out of the frame toward the left, controlling the spring as it comes out. When the hammer strut and spring are separated from the base ring, note which of the recesses is being used. There are four, of varying depths, for spring power adjustment.
12. Move the cylinder latch button to the rear, and depress the trigger until the hammer clears the frame recess. Remove the hammer toward the right.
13. Hold a fingertip over the hole at the front of the hammer to arrest the spring and plunger, and push the double-action lever out of its recess toward either side.
14. A small tool can be used to lift the plunger and spring out of the hammer, through the hole at the front.
15. With a small screwdriver, slightly depress the spring and lift the rear of the trigger rebound slide off its post in the frame for removal. Caution: The spring is under tension, so control it.
16. Move the cylinder hand slightly rearward to clear its slot in the frame, and remove the trigger assembly toward the right.
17. Remove the rebound slide strut from the left side of the trigger. Control the cylinder hand plunger and spring.
18. Remove the cylinder hand from the right side of the trigger, and the plunger and spring from the rear.
19. Take out the screw at the front of the triggerguard, and remove the cylinder stop spring and plunger.
20. Move the cylinder stop to its rearmost position on the post, tilt it downward and remove it toward the right.
21. Remove the screw that retains the cylinder latch button. During removal of the screw, keep a fingertip on the latch bar inside, to prevent it from being forced outward. Remove the latch button toward the left.
22. Move the latch bar to the rear, and tilt its rear cross-piece outward (toward the right). Caution: As the inside rear tip of the bar clears the frame, the plunger and spring will be released. Remove the latch bar rearward and toward the right.
23. The rear sight assembly is retained by a single screw in its forward extension, and it is taken off upward.
24. The front sight is retained by a roll crosspin. After the pin is driven out, the sight is taken out straight upward.
25. Drifting out a crosspin in the barrel underlug will release the front cylinder locking plunger and its spring for removal toward the rear.
26. The firing pin and its spring are retained by a small crosspin in the frame.
Reassembly Tips:
1. When replacing the double-action lever in the hammer, insert a small drift through the hole at the front to depress the plunger and spring until the lever covers the plunger.
2. Install the hammer-block bar on its post on the rebound slide in its uppermost position. Fit the guide track to it as the sideplate is installed.
3. Select the hammer spring tension wanted by placing the spring in one of the four recesses in the base ring. The deeper the recess, the less tension.
4. When installing the spring bushing, note that its flange must be oriented as shown.
5. When installing the ejector rod in the cylinder, remember that it turns counterclockwise (front view) to tighten. Do not over-tighten, or the fine threads may be stripped. Place empty cartridge cases in the chambers to protect the spline.
A Note on Reassembly
Most of the revolvers covered in this book can be reassembled by simply reversing the order of disassembly, carefully replacing the parts in the same manner they were removed. In a few instances, special instructions are required, and these are listed above. In certain cases, reassembly photos are also provided.
If there are no special instructions or photos with a particular gun, you may assume that it can just be reassembled in reverse order. During disassembly, note the relationship of all parts and springs, and lay them out on the workbench in the order they were removed. By following this procedure you should have no difficulty.
Baby Hammerless
The Baby Hammerless was first made by Henry M. Kolb, from 1892 to 1910. Between 1910 and 1930, it was produced by R. F. Sedgeley at the same Philadelphia location, 2311 North 16th Street. The Baby Hammerless may qualify as the smallest revolver ever made. During its production time, there were several small variations in the design, but the internal mechanism was not changed.
Disassembly:
1. Depress the latch, and remove the cylinder base pin. Note that some versions have a different base pin latch. Remove the cylinder.
2. Remove the grip screw and take off the grips. Be careful — the early hard-rubber panels are fragile. Loosen the screw a few turns, and push gently on its head to free the right grip panel.
3. Tap the lower end of the hammer spring out of its frame recess for removal.
4. The trigger spring is retained by a screw inside the front of the grip frame. Use an offset screwdriver, or one with an angled tip, as shown, for removal.
5. Removal of the trigger pivot screw will require a very small screwdriver tip, shaped to fit the slot. Be careful, as the screw threads are at the head of the screw.
6. Remove the trigger assembly downward. The cylinder hand will be freed from its pivot post as it emerges, so take care that it isn’t lost.
7. Taking out the cross-screw at the rear will free the hammer lever and the lever/hand spring for removal. Note that on the one shown, the spring is a later round-wire replacement.
8. The trigger pivot screw is usually staked in place at its tip, and should not be routinely removed.
9. The primary cylinder stop and its spring are retained by a crosspin. The secondary stop, at the front, is driven in and staked in place. It is not routinely removed.
10. Remove the hammer pivot screw.
11. Keeping the rebound lever folded against the hammer, turn the hammer to the position shown for removal.
12. Removal of the hammer rebound lever can be done by drifting out its crosspin. However, the pin is riveted in place on both sides, and this should be done only if necessary for repair.
13. The cylinder base pin latch and its spring are retained by a very small screw at the front of the frame. This screw is often finished-over, and should be removed only for repair.
14. The screw at front-center retains the cylinder tension plunger and its spring. These parts are very small, so guard against loss.
Reassembly Tip:
1. When installing the hammer spring, be sure its upper tip engages the notch in the rebound lever, as shown.
A Note on Reassembly
Most of the revolvers covered in this book can be reassembled by simply reversing the order of disassembly, carefully replacing the parts in the same manner they were removed. In a few instances, special instructions are required, and these are listed above. In certain cases, reassembly photos are also provided.
If there are no special instructions or photos with a particular gun, you may assume that it can just be reassembled in reverse order. During disassembly, note the relationship of all parts and springs, and lay them out on the workbench in the order they were removed. By following this procedure you should have no difficulty.
Charter Arms Off-Duty
Introduced in 1998 by the interim company Charter 2000,
the internal-hammer Off-Duty has been continued by the present Charter Arms. The Off-Duty
name was previously used for an external-hammer version. With a frame made of 7075 aircraft aluminum, the Off-Duty is one of the lightest revolvers of its type.
Disassembly:
1. Remove the grip screw, and take off the two rubber panels. Remove the screw at the front of the frame, and take out the cylinder and crane assembly.
2. Before detailing disassembly of the cylinder unit, I will note that reassembly can be quite difficult. If takedown is not necessary for repair, don’t do it. To begin, use slim pliers to grip the center shaft, and leather-padded pliers to unscrew the ejector endpiece, as shown. Turn counter-clockwise, front view.
3. Remove the endpiece, spring and sleeve.
4. Place a small block under the ejector to hold it out (the one shown is aluminum), and pull and turn the center shaft to align the holes in the ejector, the inside sleeve and the shaft. Push out the tiny pin, and don’t lose lt.
5. Remove the retaining sleeve and the cylinder lock spring.
6. Remove the ejector/ratchet unit.
7. Remove the ejector shaft.
8. Insert a soft-metal rod (brass or aluminum) at the front, and tap it gently to free the crane lock-spring. Remove the crane unit, ejector spring and the compression washer. Take care that the small washer isn’t lost.
9. Depress the trigger until the small hole in the hammer spring guide is visible below its base-plate. Insert a small-diameter rod in the hole (an opened paper clip is shown), and release the trigger to trap the spring.
10. Remove the hammer spring assembly. If this is to be taken apart, USE CAUTION! The spring is compressed. Rest the base plate on a slightly-opened vise, and enclose the guide and spring in a shop cloth when removing. This traps the spring.
11. Remove the cross-screw at the rear of the frame.
12. Drift out the crosspin at the lower rear of the frame. Note that all of those pins have splines at one end (in this case, they were on the right), and should be drifted out in that direction.
13. Drift out the crosspin forward of the trigger.
14. Remove the hammer screw.
15. Move the grip frame slightly rearward to clear its top projection from the frame, and carefully take it off downward, along with the hammer. The trigger will have to be slightly depressed for clearance. Do not use extreme force.
16. The hammer lever and its spring are pivoted and retained by a crosspin. If this unit is taken apart, also note that the spring has a very small plunger.
17. Of the two crosspins at the top of the frame, the front one retains the steel firing pin face-plate, which is not routinely removed. The pin rearward, indicated here, retains the firing pin and its spring, which are taken out toward the rear.
18. If the cylinder latch system is to be taken out, use an offset or angled screwdriver to remove the indicated screw.
19. Removal of this screw will free the other parts of the cylinder latch system. As the screw is taken out, control the plunger and spring, and ease them out. Also, note the orientation of the little cover-plate for reassembly.
20. Drift out the trigger crosspin.
21. Remove the trigger assembly. The transfer bar and cylinder hand are easily detached.
22. Remove the pivot bushing and the spring from the trigger. Note for reassembly that the hooked end of the spring goes at the rear.
23. Use a tool to depress and control the cylinder stop plunger and spring, and move the stop inward, off its hollow post, for removal. Ease out the plunger and spring.
Reassembly Tip:
1. When the grip frame is reinstalled, note that there is a projection on the top piece that must enter a recess in the frame. Be careful with the aluminum grip-frame during installation.
A Note on Reassembly
Most of the revolvers covered in this book can be reassembled by simply reversing the order of disassembly, carefully replacing the parts in the same manner they were removed. In a few instances, special instructions are required, and these are listed above. In certain cases, reassembly photos are also provided.
If there are no special instructions or photos with a particular gun, you may assume that it can just be reassembled in reverse order. During disassembly, note the relationship of all parts and springs, and lay them out on the workbench in the order they were removed. By following this procedure you should have no difficulty.
Charter Arms 44 Bulldog
Similar/Identical Pattern Guns
The same basic assembly/disassembly steps for the Charter 44 Bulldog also apply to the following guns:
In 1973, Charter Arms adapted its excellent small-frame revolver to the .44 Special cartridge, and made it one of the best personal defense or police backup guns in current production. Its pronounced recoil takes it out of the fun gun
class, but for its intended purpose, it is without equal. The mechanism is simple, and these guns seldom need repair. However, there are a few points in total takedown that can give the amateur some difficulty. Mechanically, the Bulldog is essentially the same as the other Charter guns, and the instructions can be used for those as well.