Tellurium in Organic Synthesis: Second, Updated and Enlarged Edition
()
About this ebook
The increasing number of publications that use tellurium clearly demonstrates the important role of tellurium compounds as unique and powerful tools in a broad range of organic chemical manipulations, often characterized by their selective behavior.
Tellurium in Organic Synthesis provides an overview of the principal aspects of organic tellurium chemistry. Many chapters have been enriched and updated in this second edition. New chapters include overviews of toxicology and pharmacology and a review on the preparation and reactivity of several tellurium heterocycles.
The first part of the book focuses on the preparation of selected inorganic tellurium compounds and on the main classes of organotellurium compounds. The second part, and main interest of the book, details the use of these inorganic and organic compounds as reagents to perform specific organic manipulations and synthesis. Reactions covered include reduction, formation and reaction of anionic species, deprotection, tellurium cyclizations, formation of alkenes, use of vinyllic tellurides, free radical chemistry, transmetallations, and removal of tellurium.
- Overview of inorganic and organic tellurium chemistry
- Synthetic applications of tellurium compounds
- All topics accompanied by detailed experimental procedures
Related to Tellurium in Organic Synthesis
Related ebooks
Ultrasonography of the Lower Extremity: Sport-Related Injuries Rating: 0 out of 5 stars0 ratingsThe Quinolones Rating: 4 out of 5 stars4/5Handbook of Polymers for Pharmaceutical Technologies, Processing and Applications Rating: 0 out of 5 stars0 ratingsNerve Membranes: A Study of the Biological and Chemical Aspects of Neuron–Glia Relationships Rating: 0 out of 5 stars0 ratingsAxons and Brain Architecture Rating: 0 out of 5 stars0 ratingsHazing Aging: How Capillary Endothelia Control Inflammation and Aging Rating: 0 out of 5 stars0 ratingsThiophene and Its Derivatives, Part 4 Rating: 0 out of 5 stars0 ratingsThiophene and Its Derivatives, Part 5 Rating: 0 out of 5 stars0 ratingsFundamental Aliphatic Chemistry: Organic Chemistry for General Degree Students Rating: 0 out of 5 stars0 ratingsThiophene and Its Derivatives, Part 3 Rating: 0 out of 5 stars0 ratingsThiophene and Its Derivatives, Part 2 Rating: 0 out of 5 stars0 ratingsPanorama of Organic Chemistry Rating: 5 out of 5 stars5/5Catalytic Kinetics: Chemistry and Engineering Rating: 0 out of 5 stars0 ratingsSulfur, Energy, and Environment Rating: 0 out of 5 stars0 ratingsTin in Organic Synthesis Rating: 5 out of 5 stars5/5Multi-Sulfur and Sulfur and Oxygen Five- and Six-Membered Heterocycles, Part 1 Rating: 0 out of 5 stars0 ratingsThiophene and Its Derivatives, Part 1 Rating: 0 out of 5 stars0 ratingsBiophysical Chemistry Rating: 4 out of 5 stars4/5Organic Sulfur Compounds Rating: 0 out of 5 stars0 ratingsInorganic Chemistry Rating: 0 out of 5 stars0 ratingsFerrocenes: Homogeneous Catalysis, Organic Synthesis, Materials Science Rating: 0 out of 5 stars0 ratingsOrganic Chemistry, Volume One: Part I: Aliphatic Compounds Part II: Alicyclic Compounds Rating: 4 out of 5 stars4/5Organophosphorus Monomers and Polymers: International Series of Monographs on Organic Chemistry Rating: 0 out of 5 stars0 ratingsPrinciples of Asymmetric Synthesis Rating: 0 out of 5 stars0 ratingsChemistry of the Non-Metallic Elements: The Commonwealth and International Library: Intermediate Chemistry Division Rating: 0 out of 5 stars0 ratingsTransition Metal Catalyzed Furans Synthesis: Transition Metal Catalyzed Heterocycle Synthesis Series Rating: 0 out of 5 stars0 ratingsGreen Catalysis: Biocatalysis Rating: 0 out of 5 stars0 ratingsAn Elementary Study of Chemistry Rating: 0 out of 5 stars0 ratingsHeterocyclic Derivatives of Phosphorous, Arsenic, Antimony and Bismuth Rating: 0 out of 5 stars0 ratingsNew Materials for Catalytic Applications Rating: 0 out of 5 stars0 ratings
Chemical Engineering For You
Silent Spring Rating: 4 out of 5 stars4/5Phase Equilibria in Chemical Engineering Rating: 4 out of 5 stars4/5Principles of Ion Exchange Technology Rating: 0 out of 5 stars0 ratingsHandbook of Cosmetic Science: An Introduction to Principles and Applications Rating: 4 out of 5 stars4/5An Introduction to the Periodic Table of Elements : Chemistry Textbook Grade 8 | Children's Chemistry Books Rating: 5 out of 5 stars5/5Fermentation and Biochemical Engineering Handbook Rating: 5 out of 5 stars5/5The Metal Bible for Kids : Chemistry Book for Kids | Children's Chemistry Books Rating: 0 out of 5 stars0 ratingsDistillation Rating: 5 out of 5 stars5/5Conduct of Operations and Operational Discipline: For Improving Process Safety in Industry Rating: 5 out of 5 stars5/5Electrochemistry for Technologists: Electrical Engineering Division Rating: 1 out of 5 stars1/5Creative Chemistry Experiments - Chemistry Book for Beginners | Children's Science Experiment Books Rating: 5 out of 5 stars5/5Distillation Troubleshooting Rating: 0 out of 5 stars0 ratingsDemystifying Explosives: Concepts in High Energy Materials Rating: 0 out of 5 stars0 ratingsIndustrial Surfactants: An Industrial Guide Rating: 5 out of 5 stars5/5Chemical Plant and Its Operation: Including Safety and Health Aspects Rating: 5 out of 5 stars5/5Engineering Chemistry Rating: 4 out of 5 stars4/5The Periodic Table of Elements - Alkali Metals, Alkaline Earth Metals and Transition Metals | Children's Chemistry Book Rating: 0 out of 5 stars0 ratingsChemical Engineering in the Pharmaceutical Industry: Drug Product Design, Development, and Modeling Rating: 0 out of 5 stars0 ratingsPower System Frequency Control: Modeling and Advances Rating: 0 out of 5 stars0 ratingsGuidelines for Integrating Management Systems and Metrics to Improve Process Safety Performance Rating: 0 out of 5 stars0 ratingsThe Future of Decentralized Electricity Distribution Networks Rating: 0 out of 5 stars0 ratingsPhysical and Chemical Equilibrium for Chemical Engineers Rating: 5 out of 5 stars5/5Recognizing Catastrophic Incident Warning Signs in the Process Industries Rating: 0 out of 5 stars0 ratingsGuidelines for Process Safety Acquisition Evaluation and Post Merger Integration Rating: 0 out of 5 stars0 ratingsThe Periodic Table of Elements - Post-Transition Metals, Metalloids and Nonmetals | Children's Chemistry Book Rating: 0 out of 5 stars0 ratingsWhat Went Wrong?: Case Histories of Process Plant Disasters and How They Could Have Been Avoided Rating: 5 out of 5 stars5/5Polymer Blends and Composites: Chemistry and Technology Rating: 0 out of 5 stars0 ratingsTroubleshooting Vacuum Systems: Steam Turbine Surface Condensers and Refinery Vacuum Towers Rating: 5 out of 5 stars5/5Bioreactor Design Fundamentals Rating: 0 out of 5 stars0 ratingsMixing V1: Theory and Practice Rating: 0 out of 5 stars0 ratings
Reviews for Tellurium in Organic Synthesis
0 ratings0 reviews
Book preview
Tellurium in Organic Synthesis - Nicola Petragnani
BEST SYNTHETIC MITHODS
Tellurium in Organic Synthesis
Second, Updated and Enlarged Edition
Second Edition
Nicola Petragnani
Instituto de Química Universidade de São Paulo, São Paulo SP-Brasil, Instituto de Química Universidade de São Paulo, São Paulo SP-Brasil
Hélio A. Stefani
Faculdade de Ciências Farmacêuticas Departamento de Farmácia Universidade de São Paulo, São Paulo SP-Brasil
Academic Press
Table of Contents
Cover image
Title page
Foreword
Preface (1994 edition)
Preface
Abbreviations
Chapter 1: Introduction
Publisher Summary
1.1 SOME PHYSICAL PROPERTIES OF TELLURIUM
Chapter 2: Preparation of the More Important Inorganic Tellurium Reagents
Publisher Summary
2.1 TELLURIUM TETRACHLORIDE
2.2 TELLURIUM DIOXIDE
2.3 ALKALI METAL TELLURIDES (Te2−Cat2+)
2.4 ALKALI METAL DITELLURIDES (Na2Te2)
2.5 HYDROGEN TELLURIDE (H2Te)
2.6 SODIUM HYDROGEN TELLURIDE (NaHTe)
Chapter 3: Preparation of the Principal Classes of Organic Tellurium Compounds
Publisher Summary
DIORGANYL TELLURIDES (SECTION 3.1)
DIORGANYL DITELLURIDES (SECTION 3.2)
ORGANYLTELLURIUM TRICHLORIDE AND DIORGANYLTELLURIUM DIHALIDES (SECTIONS 3.5 AND 3.9)
3.1 DIORGANYL TELLURIDES
3.1.2 Symmetrical diaryl tellurides
3.1.3 Unsymmetrical tellurides
3.1.4 Diorganyl tellurides by reduction of diorganyltellurium dihalides
3.1.5 Additional methods
3.2 DIORGANYL DITELLURIDES
3.3 ORGANYL TELLUROLS
3.4 BIS-ORGANYL TELLUROMETHANES
3.5 ORGANYLTELLURIUM TRIHALIDES
3.6 THE PRODUCTS OF THE HYDROLYSIS OF ARYLTELLURIUM TRIHALIDES
3.7 ARYLTELLURENYL HALIDES
3.8 ARYL TELLURENYL PSEUDOHALIDES: ARYL TELLUROCYANATES
3.9 DIORGANYL TELLURIUM DIHALIDES
3.10 DIORGANYL TELLUROXIDES
3.11 TELLUROESTERS
3.12 ARYL TELLUROFORMATES
3.13 TELLUROGLUCOPYRANOSIDES
3.14 WATER-SOLUBLE DIORGANYL TELLURIDES
3.15 DIHALOARYLTELLURO CYCLOPROPANES
3.16 VINYLIC TELLURIDES AND DITELLURIDES
3.17 ACETYLENIC TELLURIDES
3.18 ALLENIC AND PROPARGYLIC TELLURIDES
Chapter 4: Tellurium in Organic Synthesis
Publisher Summary
4.1 REDUCTIONS
4.2 TELLURIUM-MEDIATED FORMATION OF ANIONIC SPECIES AND THEIR REACTIONS WITH ELECTROPHILES
4.2.7 Miscellaneous
4.3 DEPROTECTION OF ORGANIC FUNCTIONALITY BY TELLURIUM REAGENTS
4.4 OXIDATION OF ORGANIC SUBSTANCES BY MEANS OF TELLURIUM REAGENTS
4.5 ORGANOTELLURIUM-BASED RING CLOSURE REACTIONS
4.6 CONVERSION OF ORGANOTELLURIUM COMPOUNDS INTO TELLURIUM-FREE ORGANIC COMPOUNDS
4.7 SYNTHESIS OF OLEFINS
4.8 TRANSMETALLATION REACTIONS
4.9 REACTIVITY AND SYNTHETIC APPLICATIONS OF VINYLIC TELLURIDES
4.10 FREE RADICAL CHEMISTRY
Chapter 5: Telluroheterocycles
Publisher Summary
5.1 TELLURA-3,5-CYCLOHEXANEDIONE DICHLORIDES (3,5-DIOXOTELLURANE-1,1-DICHLORIDES)
5.2 OXA AND 1-THIA-4-TELLURANES
5.3 TELLUROPHENES
5.4 1-BENZOTELLUROPHENES
5.5 BENZOTELLUREPINES, TELLUROCHROMENES AND TELLUROCHROMONES
5.6 BENZO-[c]-TELLUROPHENES
5.7 TELLURO[3,4-c]THIOPHENE
5.8 DIBENZOTELLUROPHENES
5.9 NAPHTOTHIA-, NAPHTOSELENA- AND NAPHTODITELLUROLE
5.10 2H-1,3-DITELLUROLES
5.11 TETRATELLURAFULVALENES
5.12 TELLURIN AND DERIVATIVES OF 4-H-TELLURINS AND 4-OXO-4-H-TELLURINS (TELLUROPYRAN-4-ONES)
5.13 2H-1-BENZOTELLURIN
5.14 4H-1-BENZOTELLURINS AND 4-OXO-4H-1-BENZOTELLURINS
5.15 TELLUROXANTHENES/TELLUROXANTHONES (AND DERIVATIVES)
5.16 PHENOXATELLURINS
5.17 PHENOTHIATELLURINS/PHENOSELENOTELLURINS
5.18 TELLURANTHRENES
5.19 BIS-THIENO-1,4-DITELLURINS
5.20 1,4-TELLURINO-1,4-TELLURINS
5.21 BENZENE-FUSED HETEROCYCLES CONTAINING TELLURIUM, SELENIUM AND SULPHUR
5.22 1,5-DITELLURACYCLOOCTANE AND 5H,7H-DIBENZO[b,g][1,5] TELLUROTHIOCIN
5.23 DITELLURANE DERIVATIVES
5.24 REDUCTIVE DIMERIZATION OF TELLURO- AND SELENOXANTHONE
Chapter 6: Toxicology of Organotellurium Compounds
Publisher Summary
Chapter 7: Pharmacology of Organotellurium Compounds
Publisher Summary
7.1 CHEMOPREVENTIVE ACTIVITY
Chapter 8: Miscellaneous
Publisher Summary
8.1 SOME ADDITIONAL APPLICATIONS OF TeCl4
8.2 α-HYDROXYALKYLATION OF α,β-UNSATURATED CARBONYL COMPOUNDS
8.3 CONVERSION OF ALLYLSILANES INTO ALLYLAMINES VIA PHENYLTELLURINYLATION
Subject Index
Foreword
There is a vast and often bewildering array of synthetic methods and reagents available to organic chemists today. Many chemists have their own favoured methods, old and new, for standard transformations, and these can vary considerably from one laboratory to another. New and unfamiliar methods may well allow a particular synthetic step to be done more readily and in higher yield, but there is always some energy barrier associated with their use for the first time. Furthermore, the very wealth of possibilities creates an information-retrieval problem. How can we choose between all the alternatives, and what are their real advantages and limitations? Where can we find the precise experimental details, so often taken for granted by the experts? There is therefore a constant demand for books on synthetic methods, especially the more practical ones like Organic Syntheses, Organic Reactions and Reagents for Organic Synthesis, which are found in most chemistry laboratories. We are convinced that there is a further need, still largely unfulfilled, for a uniform series of books, each dealing concisely with a particular topic from a practical point of view – a need, that is, for books full of preparations, practical hints and detailed examples, all critically assessed, and giving just the information needed to smooth our way painlessly into the unfamiliar territory. Such books would obviously be a great help to research students as well as to established organic chemists.
We have been very fortunate with the highly experienced and expert organic chemists, who, agreeing with our objective, have written the first group of volumes in this series, Best Synthetic Methods. We shall always be pleased to receive comments from readers and suggestions for future volumes.
A.R.K., O.M.-C. and C.W.R.
Preface (1994 edition)
Tellurium is the fourth element of the VIA family of the periodic table, which starts with oxygen. Since tellurium exhibits an electronic configuration similar to that of selenium and sulphur, the chemical behaviour of these elements is obviously closely related. This similarity was a hindrance to the greater development of tellurium chemistry. During several decades, research was restricted to an extrapolation of well-established reactions for the preparation and use of organic sulphur compounds to selenium, and mainly from selenium to tellurium.
Although over a quarter of a century ago it would not have been predicted that the importance of the VIA family of the periodic table would exceed that of its second element, sulphur, the development of organoselenium chemistry has been so explosive that little comment is necessary, as illustrated by the impressive number of papers as well as by several books¹–³ on the field. Tellurium compounds have taken an even longer time to rise from being considered an exotic and perverse element to a useful tool in organic chemistry.
In the mid-1950s, the German chemist Heinrich Rheinboldt reviewed the preparation and reactivity of the organic tellurium compounds by comparison with selenium analogues in Houben-Weyl-Methoden der Organischen Chemie, Vol. IX (1955). During the following years, two books and several review articles were published on the organic chemistry of tellurium, but these were still within the areas of preparation and reactivity. It was in 1971 that the first Symposium on the Selenium and Tellurium Chemistry
took place, and since then symposia have been held every 4 years. In the last few years tellurium compounds have begun to be employed in organic synthesis, giving rise to a significant number of publications and to several review articles. Finally, in 1990, a Houben-Weyl volume of more than 1000 pages was published covering all aspects of tellurium chemistry (author, K.Y. Irgolic).
At present the author feels that the remarkable development attained by the organotellurium chemistry is a clear reason for a monograph from the point of view of the organic chemist.
The aim of this monograph is to provide a comprehensive overview of the preparation and synthetic applications of tellurium compounds. It will focus on the preparation of selected inorganic tellurium compounds and on the main classes of organotellurium compounds. The major interest of the volume probably resides in the use of these inorganic and organic compounds as reagents in organic syntheses as well as the conversion of organotellurium into free organic compounds. In this regard it is sufficient to emphasize that extremely useful reactions achieved with tellurium reagents, such as selective reductions and oxidations of a large variety of organic functionalities, have not been mentioned until now in textbooks specifically devoted to organic synthetic methodology.
This monograph is appropriate for chemists who, although not experts in tellurium chemistry, have had a basic grounding to graduate level in organic chemistry and with sufficient experience of typical experimental operations.
A considerable number of experimental procedures
have been included. These have been described in accordance with the original papers, and therefore the reader will find significant differences in the description of these procedures, some rich and others very poor in detail. In the last case, the practitioner who is used to overcoming the usual laboratory difficulties will need to use a certain degree of initiative.
The author will feel very gratified if this volume helps some chemists to become familiar with tellurium which up till now they may have considered only as a useless and unpleasant element.
N. Petragnani
REFERENCES
1.Klayman, D. L., Gunther, W. H.HOrganic Selenium Compounds: Their Chemistry and Biology. New York: Wiley, 1973.
2.Paulmier, CSelenium Reagents and Intermediates in Organic Synthesis. Oxford: Pergamon Press, 1986.
3.Liotta, DOrganoselenium Chemistry. New York: Wiley, 1987.
Preface
Over a decade after the publication of the first edition of this book, it is unnecessary to emphasize once more the remarkable developments attained in organic tellurium chemistry.
Almost a thousand papers have been published in this last period, and numerous research groups all over the world have consolidated their international status.
Undoubtedly tellurium chemistry can participate in several areas of organic chemistry, as well as in others, and ever-more research chemists introduce tellurium to solve a wide variety of problems.
All this seems to us to be a good reason to write this new edition of the book. It does not differ in its general approach from the first one. Obviously it is not a compendium covering exhaustively all the aspects of organic tellurium chemistry. For this purpose the Irgolic E12b volume of Houben-Weyl is yet incomparable although 16 years old.
This book was devised in accordance with the intention of the Academic Press series Best Synthetic Methods
of the first edition, which is clearly focused in the foreword and in the preface.
Several chapters such as vinylic tellurides, transmetallation reactions, coupling reactions and free-radical chemistry have been enriched and brought up to date with new information related to their increased involvement in the most varied synthetic manipulations.
A chapter has been dedicated to heterocyclic compounds, covering the preparation and reactivity of the most familiar members of the class.
Toxicology and pharmacology have also been briefly considered, and we are greatly indebted with C. R. Nogueira, G. Zeni and J. B. T. Rocha for allowing us to use their recent review (Chem. Rev. 2004, 104, 6255) as a source for our new chapter.
Probably some contributions have escaped our judgement and not been introduced in this book. We apologize to any authors for the omission.
We would be gratified if this new edition, with its broad level of information, can disclose basic knowledge to the beginner in tellurium chemistry as well as furnish salient features for opening new perspectives to advanced researchers.
Nicola Petragnani and Hélio A. Stefani
Abbreviations
1
Introduction
Publisher Summary
This chapter discusses physical properties of tellurium (Te). The Pauling electro-negativities of carbon (C) and Te are 2.5 and 2.1, respectively. This, in addition to the large volume of the Te atom (atomic radius 1.37 and ionic radius 2.21), promotes easy polarization of Te–C bonds. The ionic character of the bonds increases in the order C(sp3)–Te–C(sp2)–Te–C(sp)Te, in accordance with the electro-negativity of carbon accompanying the s
character as illustrated in a table provided in the chapter. The Te–C bond, therefore, exhibits a high reactivity as demonstrated typically by the easy heterolytic cleavage toward nucleophilic reagents.
1.1 SOME PHYSICAL PROPERTIES OF TELLURIUM
The Pauling electronegativities of carbon and tellurium are, respectively, 2.5 and 2.1. This, in addition to the large volume of the tellurium atom (atomic radius 1.37, ionic radius 2.21), promotes easy polarization of Te–C bonds. The ionic character of the bonds increases in the order C(sp³)–Te>C(sp²)–Te>C(sp)–Te, in accordance with the electronegativity of carbon accompanying the s character (Table 1.1).
Table 1.1
Some physical properties of the VIA family of elements
The Te–C bond therefore exhibits a high reactivity, as demonstrated typically by the easy heterolytic cleavage towards nucleophilic reagents.
1.2 RELEVANT MONOGRAPHS AND REVIEW ARTICLES
1. Rheinboldt, H.Muller, E., eds. Houben-Weyl-Methoden der Organischen Chemie, 4th edn, Vol. IX. Stuttgart: Georg Thieme, 1955.
2.Petragnani, N., Moura Campos, M. Organomet. Chem. Rev.. 1967; 2:61.
3.Cooper W.C., ed. Tellurium. New York: Van Nostrand Rheinhold, 1971.
4. Irgolic, K. J., Zingaro, R.Becker E., Tsutsui M., eds. Organometallic Reactions. New York: Wiley, 1971.
5.Irgolic, K. J. The Organic Chemistry of Tellurium. Gordon and Breach, New York, 1974.
6.Irgolic, K. J. J. Organomet. Chem. 1975; 103:91. Irgolic, K. J. J. Organomet. Chem. 1977; 130:411. Irgolic, K. J. J. Organomet. Chem. 1978; 158:235. Irgolic, K. J. J. Organomet. Chem. 1980; 189:65. Irgolic, K. J. J. Organomet. Chem.. 1980; 203:368.
7. Uemura, S. Nippon Kagaku Kaishi. 1981; 36:381.
8. Petragnani, N., Comasseto, J. V.Berry F.Y., McWhinnie W.R., eds. Proceedings of the 4th International Conference of the Organic Chemistry of Selenium and Tellurium. The University of Aston in Birmingham: Birmingham, 1983:98–241.
9. Uemura, S. J. Synth. Org. Chem. Jpn.. 1983; 41:804.
10. Engman, L. Acc. Chem. Res.. 1985; 18:274.
11. Petragnani, N., Comasseto, J. V. Synthesis. 1986; 1.
12. Suzuki, H. Synth. Org. Chem. Jpn.. 1987; 45:603.
13. Sadekov, D., Rivkin, B. B., Minkin, V. Y. Russ. Chem. Rev.. 1987; 56:343.
14. Patai, S., Rappoport, Z., eds. The Chemistry of Organic Selenium and Tellurium Compounds, Vols I and II. New York: Wiley, 1986.
15. Engman, L. Phosphorus Sulfur. 1988; 38:105.
16. Irgolic, K. Y.Klamann, D., eds. Houben-Weyl Methods of Organic Chemistry, 4th edn, Vol. E12b. Stuttgart: Georg Thieme, 1990.
17. Petragnani, N., Comasseto, J. V. Synthesis. 1991; 793.
18. Petragnani, N., Comasseto, J. V. Synthesis. 1991; 897.
19. Chapter 14: Petragnani, N.McKillop, A., eds. Tellurium in Comprehensive Organometallic Chemistry II, Vol. 11. Pergamon, Elsevier, 1995.
20. Comasseto, J. V., Lo, W. L., Petragnani, N., Stefani, H. A. Synthesis. 1997; 4:373.
21. Petragnani, N., Stefani, H. A. Tetrahedron. 2005; 61:1613.
2
Preparation of the More Important Inorganic Tellurium Reagents
Publisher Summary
This chapter reviews preparation of the more important inorganic tellurium (Te) reagents. The apparatus is charged with 100–150 g of fine powdered Te (the apparatus and the Te have been previously heated overnight at 110°C to ensure dryness). A stream of Cl2 (dried by bubbling in concentrated H2SO4) is slowly introduced by means of a Tygon tube. Meanwhile, the apparatus is heated with a small burner flame. After a few minutes, the solid Te begins to convert into a black liquid. The reaction is exothermic (and proceeds spontaneously), but the absorption of Cl2 is accelerated by heating the mixture from time to time. After a while, the mixture becomes clearer, giving finally an amber-colored liquid, which by increased heating, forms a vapor of the same color. At that time, the absorption is complete and all the Te is converted into TeCl4. By vigorous burner heating, the product is transferred by distillation, under a continuous Cl2 stream, into the tubes, where it solidifies. The tubes are detached from the apparatus by melting. The yield is 90%.
2.1 TELLURIUM TETRACHLORIDE
Tellurium tetrachloride is prepared directly from the respective elements.¹
Experimental procedure¹. The apparatus in Figure 2.1 is charged with 100–150 g of fine-powdered Te (the apparatus and the Te have been previously heated overnight at 110°C to ensure dryness). A stream of Cl2 (dried by bubbling in concentrated H2SO4) is slowly introduced by means of a Tygon tube; meanwhile, the apparatus is heated with a small burner flame. After a few minutes the solid Te begins to be converted into a black liquid. The reaction is exothermic (and proceeds spontaneously), but the absorption of Cl2 is accelerated by heating the mixture from time to time. After a while the mixture becomes clearer, giving finally an amber-coloured liquid, which by increased heating forms a vapour of the same colour. At that time the absorption is complete and all the Te has been converted into TeCl4. By vigorous burner heating, the product is transferred by distillation, under a continuous Cl2 stream, into the tubes, where it solidifies. The tubes are detached from the apparatus by melting. The yield is 90%.
Figure 2.1 Apparatus to prepare TeCl4.
Tellurium tetrachloride is a pale yellow crystalline solid, melting point (m.p.) 225°C, highly hygroscopic, soluble in dioxane, acetone, ether, methanol and ethanol but less soluble in benzene and chloroform.
Tellurium tetrachloride is instantaneously hydrolysed by water, giving tellurium oxochloride, which is soluble in concentrated hydrochloric acid, forming HTeCl5 and H2TeCl6.
The Raman data suggest the ionic structure for TeCl3+ CL− in both the solid and liquid states.²
2.2 TELLURIUM DIOXIDE
Tellurium dioxide is prepared by oxidation of elemental tellurium with concentrated nitric acid.³
Experimental procedure.³ Commercial Te (20 g, finer than 60 mesh) is weighed into a 1000 mL beaker, covered with H2O (200 mL) and treated by the slow addition of 95 mL of concentrated HNO3 (95 mL, specific gravity 1.42). The reaction is allowed to continue for 5–10 min with occasional agitation. Insoluble impurities are removed immediately by filtration on a Büchner funnel. The filtrate is transferred to a 600 mL beaker. Concentrated HNO3 (65 mL) is then added and the solution boiled until oxides of nitrogen have been expelled. Basic nitrates of antimony and bismuth precipitate at this point if these substances are present as impurities. These are removed by filtering through asbestos, after which the clear liquor is evaporated gently on a water bath under a hood in an open 600 mL beaker. Basic tellurium nitrate is deposited. The evaporation is continued until the solution volume has been reduced to 100 mL. The solution is then cooled. The crystalline deposit is filtered, washed with H2O on a suction filter and air dried. The dry crystals are placed in a 400 mL beaker, covered by inverting a 1000 mL beaker over the smaller beaker, and heated at a hot-plate temperature of 400–430°C for 2 h. The TeO2 (21 g, 84%) is cooled and bottled immediately to avoid slow darkening due to reduction by organic matter from the atmosphere.
Tellurium dioxide is a white solid existing in two crystalline forms. It is soluble in water and in both aqueous sodium hydroxide and hydrochloric acid.
2.3 ALKALI METAL TELLURIDES (Te²−Cat²+)
These reagents are usually prepared in situ.
The preparative methods are outlined in sequence and representative experimental procedures are described in later chapters.
2.3.1 From the elements (2Na + Te → Na2Te)
2.3.1.1 In liquid ammonia⁴
2.3.1.2 In DMF⁵
2.3.1.3 In the presence of naphthalene⁶
2.3.2 From tellurium and reducing agents (Te → Te²−)
2.3.2.1 Rongalite (HOCH2SO2Na/NaOH)⁷
2.3.2.2 Thiourea dioxide (TUDO, HN=C(NH2)S(O)OH)/NaOH⁸
2.3.2.3 Hydride transfer reagents
KBH4/NaOH⁹
Me4NBH4 (giving tetramethylammonium telluride)¹⁰
NaBH4/DMF¹¹
NaBH4/H2O¹²
LiHBH3¹³
2.3.2.4 Tin(II) chloride/KOH/DMSO¹⁴
2.3.2.5 Hydrazine hydrate/NaOH¹⁵
2.3.3 From tellurium and non-reducing bases
2.3.3.1 NaH/DMF¹⁶
2.3.3.2 NaH/DME¹⁷
2.3.3.3 NaH/N-methyl-2-pyrrolidone¹⁸
2.4 ALKALI METAL DITELLURIDES (Na2Te2)
2.4.1 From the elements (2Na + 2Te → Na2Te2)
2.4.1.1 In liquid ammonia¹⁹
2.4.1.2 In HMPA²⁰
2.4.1.3 In the presence of naphthalene²¹
2.4.2 From tellurium and reducing agents ( )
2.4.2.1 Rongalite²²
2.4.2.2 TUDO/NaOH²³
2.4.2.3 Hydride transfer reagents
NaBH4/EtONa/EtOH²⁴
NaBH4/DMF²⁵
2.4.2.4 Hydrazine hydrate/NaOH²⁶
2.5 HYDROGEN TELLURIDE (H2Te)
Hydrogen telluride is prepared in situ by hydrolysis of aluminium telluride.²⁷
2.6 SODIUM HYDROGEN TELLURIDE (NaHTe)
Sodium hydrogen telluride is prepared by reduction of tellurium with NaBH4 under several conditions. The original procedure uses ethanol as the solvent, adding, after complete reduction of the tellurium, an appropriate amount of acetic acid (see Section 4.1.2, ref. 10; Section 4.1.70, ref. 29).
REFERENCES
1.Suttle, Y. F., Smith, C. R.F. Inorg. Synth.. 1956; III:140.
2.Gerding, H., Houtgraff, H. Recl. Trav. Chim.. 1954; 73:737.
3.Marshall, H. Inorg. Synth.. 1950; III:143.
4. Section 3.1.1.1 (a), ref. 1.
5. Section 3.1.1.1 (a), ref. 8.
6. Section 3.1.1.1 (a), refs. 10, 11.
7. Section 3.1.1.1 (b), refs. 14, 15; Section 4.1.6, ref. 19; Section 4.1.9, ref. 33; Section 4.1.11, ref. 41; Section 4.2.5, ref. 6.
8. Section 3.1.1.1 (b), ref. 23.
9. Section 3.1.1.1 (b), ref. 24.
10. Section 3.1.1.1 (b), ref. 15.
11. Section 3.1.2.2, ref. 8; Section 4.1.11, ref. 40; Section 4.3.1.1, ref. 2.
12. Section 3.1.3.1, ref. 1; Section 4.1.13.1, ref. 49.
13. Section 5.1, ref. 2.
14. Section 3.1.1.1 (b), ref. 26.
15. Section 3.1.1.1 (b), ref. 27.
16. Section 3.1.2.1, ref. 5; Section 3.16.1.3, ref. 27; Section 4.1.5, ref. 17; Section 4.2.1, ref. 1; Section 4.3.2.2, ref. 5.
17. Section 4.2.5, ref. 5.
18. Section 3.1.2.1, ref. 7.
19. Section 3.2.1.1, ref. 1.
20. Section 3.2.1.2, ref. 10.
21. Section 3.2.1.1, ref. 3.
22. Section 3.2.1.1, ref. 6.
23. Section 3.2.1.1, ref. 7.
24. Section 3.2.1.1, ref. 5.
25. Section 4.3.1.1, ref. 2.
26. Section 3.2.1.1, ref. 9.
27. Section 4.1.1.1, ref. 1; Section 4.1.4, ref. 14; Section 4.1.6, ref. 18.
3
Preparation of the Principal Classes of Organic Tellurium Compounds
Publisher Summary
This chapter discusses diorganyl tellurides and ditellurides, organyltellurium trichlorides and diorganyltellurium dichlorides, which were the first classes of compounds investigated at the beginning of tellurium (Te) organic chemistry. Diorganyl tellurides, compounds with two organic groups linked to a Te atom, constitute the most abundant and familiar class of organic Te compounds. The organic groups of the most differentiated types can be identical or different, giving rise to symmetrical or unsymmetrical tellurides. The main routes to symmetrical diorganyl tellurides involve the direct reaction of nucleophilic telluride dianions with alkylating or arylating reagents. Otherwise, the electrophilic Te tetrahalides react with arylmagnesium reagents, giving diaryl tellurides. Diorganyl ditellurides are prepared by three routes: alkylation or arylation of the ditelluride dianion; oxidation of tellurolate anions; and reduction of the corresponding organyltellurium trichlorides. Organyltellurium trichlorides and diorganyltellurium dichlorides are prepared starting from the electrophilic tellurium tetrachloride by (1) condensation reactions with active methylene compounds; (2) addition to a C=C bond; (3) electrophilic substitution in aromatic hydrocarbons; and (4) reaction with organomercury chlorides. This chapter explores the preparation of principal classes of organic Te compounds in detail.
This chapter is devoted mainly to the preparation of those classes of organotellurium compounds that have been more systematically investigated in past years, owing to their peculiar role as reagents or intermediate in organic synthesis, including compounds of structural, biological or theoretical interest.
Sections 3.1–3.3 outline the principal preparative methods of diorganyl tellurides and ditellurides, organyltellurium trichlorides and diorganyltellurium dichlorides, which were the first classes of compounds investigated at the beginning of tellurium organic chemistry.
The physical properties and stability of the compounds are also described briefly.
DIORGANYL TELLURIDES (SECTION 3.1)
The main routes to symmetrical diorganyl tellurides involve the direct reaction of nucleophilic telluride dianions (usually as Na2Te) with alkylating or arylating reagents. Otherwise the electrophilic tellurium tetrahalides react with arylmagnesium reagents, giving diaryl tellurides.
Unsymmetrical tellurides are obtained as follows:
• starting from nucleophilic tellurolate anions (easily generated by telluration of Grignard and lithium reagents or by reduction of diorganyl ditellurides) by reaction with alkylating or arylating reagents, or by addition to acetylenes;
• by cleavage of diaryl ditellurides with arylmagnesium reagents, diazonium salts, or arenesulphonylazo compounds;
• by the reaction of electrophilic tellurenyl halides with Grignard reagents.
Diorganyl tellurides have low molecular mass and are colourless or yellowish liquids with an unpleasant and penetrating odour. Dimethyl telluride is a metabolite of tellurium and tellurium compounds in a variety of living organisms, including humans. Higher dialkyl tellurides and most diaryl tellurides are solids with low melting points (diphenyl telluride is a liquid).
Diorganyl tellurides are soluble in common organic solvents.
Because of the above-mentioned organoleptic properties, it is recommended that contact between dialkyl tellurides and the skin is avoided, and that, in general, all work involving diorganyl tellurides is performed under a well-ventilated hood.
The thermal stability and sensitivity to the atmosphere of diorganyl tellurides is dependent on the organic moiety. Many aliphatic, cycloaliphatic, as well as vinylic and acetylenic tellurides are reported to be decomposed by light, and therefore some authors recommend preparation of these compounds in the dark or under a red light.¹ These tellurides are also sensitive to exposure to the open atmosphere, easily undergoing oxidation to mixtures containing the corresponding telluroxides in addition to other products. These oxidations are especially effective in solution, where the oxidation products separate as amorphous insoluble solids. Benzyl groups in tellurides are characterized by a peculiar lability, as demonstrated by the oxidative cleavage of aryl benzyl tellurides leading to aromatic carbonyl compounds.² Diaryl tellurides are generally more stable and can be handled in the open atmosphere.
DIORGANYL DITELLURIDES (SECTION 3.2)
Diorganyl ditellurides are prepared by three routes:
• alkylation or arylation of the ditelluride dianion (usually as Na2Te2);
• oxidation of tellurolate anions;
• reduction of the corresponding organyltellurium trichlorides.
The Te2 group is a chromophore, and aliphatic and aromatic ditellurides exhibit a characteristic orange to pale or dark red colour (absorption maximum at ~400 nm).
The short-chain aliphatic ditellurides are liquids with a pungent odour, whereas the higher members (more than 10 C chains) are solids with low melting points.
Diaryl ditellurides, which are more important as synthetic intermediates, are solids, highly soluble in solvents such as petroleum ether, benzene, chloroform, ether, and tetrahydrofuran (THF), but are less soluble in methanol and ethanol.
Dibenzyl ditelluride exhibits the peculiar lability of the tellurium–benzyl bond already mentioned for the corresponding tellurides. By heating the solid at 120°C, or by exposure in solution to ordinary incandescent lighting or to a Hanovia lamp, a rapid decomposition into elementary tellurium and dibenzyl telluride occurs.³
ORGANYLTELLURIUM TRICHLORIDE AND DIORGANYLTELLURIUM DIHALIDES (SECTIONS 3.5 AND 3.9)
Organyltellurium trichlorides and diorganyltellurium dichlorides are prepared starting from the electrophilic tellurium tetrachloride (or aryltellurium trichlorides) by:
• condensation reactions with active methylene compounds;
• addition to a C=C bond (or a C≡C bond, not shown in the scheme);
• electrophilic substitution in aromatic hydrocarbons; and
• reaction with organomercury chlorides.
Organyltellurium trichlorides and the not directly accessible tribromides and triiodides are obtained by the halogenolysis of the Te–Te bond of the corresponding ditellurides.
Diorganyltellurium dihalides can also be prepared by the addition of halogens to the parent tellurides.
The tri- and dihalides are crystalline compounds. The chlorides are colourless (or yellow such as some aryltellurium trichlorides), the colour changing to orange and red (or deep red) for the bromides and iodides.
The aryltellurium trihalides are generally more stable than the alkyltellurium trihalides (alkyltellurium trichlorides, produced by the addition of TeCl4 to olefins, easily liberate elemental tellurium).
The reactivity of aryltellurium trihalides decreases on going from the chlorides to the iodides, the same trend occurring for hydrolysis. Aryltellurium trichlorides are very sensitive to water and moisture and are easily hydrolysed, the tribromides being more stable, while the triiodides are unaffected by cold water and can be prepared even by aqueous procedures. Diaryltellurium dihalides are stable in water, and ionic exchange reactions allow the conversion of dichlorides into dibromides and diiodides.
Aryltellurium trichlorides are highly soluble in methanol and ethanol but less soluble in benzene. Diaryltellurium dichlorides exhibit inverse solubilities, being more soluble in benzene than in methanol or ethanol. These properties allow an easy separation of diaryl tellurides from diaryl ditellurides (frequently formed as by-products in the preparation of tellurides): the mixture is treated with SO2Cl2 and the obtained mixed di- and trichlorides are separated by the appropriate solvents, and reduced back into the pure tellurides and ditellurides.
REFERENCES
1. Clive, D. L.J., Chittattu, G. J., Farina, V., Kiel, W. A., Menchen, S. M., Russell, C. G., Singh, A., Wong, C. K., Curtis, N. J. J. Am. Chem. Soc.. 1980; 102:4438.
2. Ferreira, J. T.B., Oliveira, A. R.M., Comasseto, J. V. Tetrahedron Lett.. 1992; 33:915.
3. Spencer, H. K., Cava, M. P. J. Org. Chem.. 1977; 42:2937.
3.1 DIORGANYL TELLURIDES
Diorganyl tellurides, compounds with two organic groups linked to a tellurium atom, constitute the most abundant and familiar class of organic tellurium compounds. The organic groups, of the most differentiated types, can be identical or different, giving rise to symmetrical or unsymmetrical tellurides.
Since symmetrical dialkyl and diaryl tellurides are the most employed in organic synthesis, and often exhibit structural or biological interest, their preparation will be examined in detail, focusing on the methods and procedures that are considered as the most popular.
3.1.1 Symmetrical dialkyl tellurides
3.1.1.1 From alkali tellurides and alkylating agents
Alkali tellurides, among which sodium telluride is the most widely employed, are powerful nucleophilic reagents and therefore react easily with alkylating agents.
(a) From sodium telluride prepared from the elements
(i) Sodium/liquid ammonia method
This method has been applied successfully to n- and s-alkyl halides.¹–⁴
Dialkyl tellurides (general procedure).¹ Elemental Te is added in ~0.5 g portions to a well-stirred solution of Na in liquid NH3 until the solution decolourizes, forming a colourless suspension (2 g-atom Na/1 g-atom Te). The quantities of the materials are chosen to give a suspension of ~0.7 M. The alkylating agent is added dropwise in 10% excess to the suspension of Na2Te. The reaction mixture is stirred until the NH3 evaporates. H2O is then added, the mixture extracted with ether and the ethereal solution worked up in the usual manner.
Diethyltelluride: yield 80%; b.p. 38°C/14 torr, Diisopropyltelluride: yield 80%; b.p. 49°C/14 torr.
When the alkylating agent is insoluble in liquid ammonia, as in the case of long-chain compounds, an organic solvent is added to the sodium telluride residue after evaporation of the ammonia. Some cyclic and steroidal tellurides have been prepared from sodium telluride in ethanol and the appropriate dihalides.⁵–⁷
(ii) Sodium/DMF method⁸,⁹
Bis(2-phenyl-1,2-dioxolan-2-yl)methyl telluride (typical procedure).⁸ Finely powdered Te (0.30 g, 2.3 mmol) and Na (0.22 g, 9.6 mmol) are stirred under N2 in dry DMF (15 mL) at 110°C until all the Te has disappeared (15 min). 2-(Bromomethyl)-2-phenyl-1,3-dioxolane (1.15 g, 4.7 mmol) in dry THF (10 mL) is added to the resulting yellowish suspension. After 2.5 h at room temperature the reaction mixture is poured into H2O and extracted with ether. Chromatography on SiO2 (eluent: CH2Cl2/petroleum ether at 40–60°C, 1:1) furnishes the telluride (0.65 g (60%); recrystallized from EtOH, m.p. 67–68°C).
Additional examples: R = n-C12H25 (66%), PhCH=CH- (41%).⁹
(iii) Sodium/naphthalene method
Sodium telluride can be prepared under mild conditions from the elements in the presence of catalytic amounts of naphthalene¹⁰ or by treating tellurium with sodium naphthalide.¹¹
Dialkyl tellurides (general procedure).¹⁰ Te powder (3.58 g, 28 mmol), Na chips (1.29 g, 56 mmol), and naphthalene (0.72 g, 5.6 mmol) in THF (25 mL) are refluxed under N2 and stirred for 3 h. The heterogeneous white mixture is cooled at 0°C and the alkyl halide (56 mmol) is added slowly, stirring for 30 min. After 30 min of additional stirring, the mixture is filtered, the solution evaporated and the residue distilled under vacuum, giving the telluride.
Diallyl telluride (typical procedure).¹¹ In a 25 mL Schlenk flask, Te pieces (6.1 g, 48 mmol, from a Te ingot), Na (2.2 g, 96 mmol) and naphthalene (0.1 g, 0.8 mmol) in THF (20 mL) are stirred under argon at 25°C for 4 days. The mixture is filtered and the filter cake washed with THF (20 mL) and dried under vacuum to give Na2Te (7.6 g, 92%). Alternatively, Te powder (60 mesh)