Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Huawei Confidential
Power
Parameter Name
maxDlPowerCapability maximumTransmissionPower primaryCpichPower primarySchPower maxTxPowerUl pwrAdm
pwrOffset
pwrHyst maxPowerOverloadHystTime minPwrRl minPwrMax interPwrMax maxPwrMax maxDlPowerCapability maximumTransmissionPower
Huawei Confidential
Page 2
If the value of the maximumTransmissionPower parameter is set to a value higher than the value of the maxDlPowerCapability parameter, the actual maximum power is still equal to the value of the maxDlPowerCapability parameter. Since the maximumTransmissionPower Settings are wrong, Power Admission and Congestion Resolving Actions are BLOCKED Since the maximumTransmissionPower Settings are wrong, RAB Establishment Failures are not Classified Due To POWER. Failures are listed as FAILURE AFTER ADMISSION & BLOCKNODE Since Power Admission and Congestion Resolving Actions are BLOCKED , In Case of Power Congestions (HIDDEN) SOHO Success Rate Decreases due to Radio Link Addition Failures
HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential
Page 3
Since the primaryCpichPower should not exceed 10% of the maximumTransmissionPower (maxDlPowerCapability) There are 261 Utrancells exceeding the primaryCpichPower limit from 1.2 Watt to 0.04 Watt This wrong setting prevents resources to be allocated accordingly. Too little power remained for CS, R99 & HS services. LOW Throughput LOW Data VOLUME Service RABs might have drops due to little power remained for services.
HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential
Page 4
primaryCpichPower was set to 1 Watt by default. For some Utrancells, due to Transmission Network limitations and overshooting issues, has been decreased. For 177 Utrancells, primaryCpichPower might be increased from 1.01 Watt to 0.04 Watt range For Better COVERAGE and To See REAL CAPACITY REQUIREMENTS, It is recommended to utilize the available range especially for Urban Utrancells. This step will provide us to see the real necessities for NodeBs for capacity Upgrade (CE & Power)
HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential
Page 5
primaryCpichPower was set to 1 Watt by default. For some Utrancells, due to Transmission Network limitations and overshooting issues, has been decreased. For 177 Utrancells, primaryCpichPower might be increased from 1.01 Watt to 0.04 Watt range For Better COVERAGE and To See REAL CAPACITY REQUIREMENTS, It is recommended to utilize the available range especially for Urban Utrancells. This step will provide us to see the real necessities for NodeBs for capacity Upgrade (CE & Power)
HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential
Page 6