Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Introduction to Robond L
Mixing of Catalyst
S417
Smoothing Bar
Smoothing Bar
Smoothing bar should be:
placed as close to the coating unit as possible have variable speed control not touch web when line is stopped
highly polished
Nipping process
Leave the cylinder idle. Keep the cylinder wet. DO NOT let cylinder stop running. Doctor blade MUST be raised immediately. Adhesive can potentially dry in the cell of the cylinder causing low coat weight if cylinder stops and doctor blade is not up. If the machine is likely to be stopped for longer than 20-30 minutes, drain the adhesive out from the pan and clean the cylinder thoroughly. Use of chilled gravure roll in extremely hot and humid climates may assist adhesive release and prevent clogging.