Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Content
Classification of channels
Structure and Function of channels
Architecture of UMTS
CN Iu RNS RNC Iub Iub Iur RNC Iub NodeB Iub NodeB RNS Iu
NodeB
NodeB
UE
Channel Type
Physical channel Transport channel Logical channel
UE
Node B
RNC
Concept of channel
RLC layer Logical channel MAC layer Transport channel PHY layer
L2
L1
Physical channel
Channel Type
Logical channels:
Describe what is transported (i.e., the information to be transmitted)
Transport channels:
Describe how the logical channels are to be transmitted.
Physical channels:
Represent the transmission media providing the platform through which the information is actually transferred.
RRC
control
L3
Radio Bearers PDCP PDCP
control
control
control control
L2/PDCP
BMC
L2/BMC
RLC
L2/RLC
L2/MAC
Transport Channels
PHY
L1
Logical Channels
Control Channel (CCH)
Broadcast Control Channel (BCCH) Paging Control Channel (PCCH) Dedicated Control Channel (DCCH) Common Control Channel (CCCH)
Transport Channel
Common Transport Channels Broadcast Channel (BCH) Paging Channel (PCH) Random Access Channel (RACH) Forward Access Channel (FACH) Common Packet Channel (CPCH) Downlink Shared Channel (DSCH) Dedicated Transport Channels Dedicated Channel (DCH)
Physical Channel
Uplink Physical Channels Physical Random Access Channel (PRACH) Physical Common Packet Channel (PCPCH) Dedicated Physical Channel (DPCH) Downlink Physical Channels Common Pilot Channel (CPICH) Primary Common Control Physical Channel (P-CCPCH) Secondary Common Control Physical Channel (S-CCPCH) Synchronization Channel (SCH) Physical Downlink Shared Channel (PDSCH) Acquisition Indication Channel (AICH)
Mapping relationship
Uplink
Logic Channel CCCH DCCH DTCH
Downlink
PCCH BCCH CCCH CTCH DCCH DTCH
Transport Channel
PCH
BCH
FACH
DSCH
DCH
Mapping relationship
Transport Channels
DCH
Physical Channels
Dedicated Physical Data Channel (DPDCH) Dedicated Physical Control Channel (DPCCH)
RACH CPCH
Physical Random Access Channel (PRACH) Physical Common Packet Channel (PCPCH) Common Pilot Channel (CPICH)
Primary Common Control Physical Channel (P-CCPCH) Secondary Common Control Physical Channel (S-CCPCH)
Synchronization Channel (SCH) DSCH Physical Downlink Shared Channel (PDSCH) Acquisition Indication Channel (AICH) Page Indication Channel (PICH)
Content
Classification of channels
Structure and Function of channels
Physical Channels(1)
The physical channel is in a 3-layer structure by the time: Superframe One superframe lasts 720ms, and consists of 72 radio frames. radio frame One radio frame has a period of 10ms, and comprises 15 timeslots with the same length. Corresponding to 38400 chips, it is a basic unit of the physical layer. Timeslot A timeslot is a unit composed of a bit domain, corresponding to 2560 chips. The bit number and structure of a timeslot depends on the specific type of the physical channel.
Physical Channels(2)
The frame structure of the physical channels is shown:
Ttimeslot= 2560 chip
Tslot #1 Tslot #2
Tslot #I
Tslot #15
Tframe=10 ms
Frame #0
Frame #1
Frame #I
Frame #71
Tsuperframe=720 ms
PRACH
Physical Random Access Channel
PRACH consists preamble part and message part Random access transmit 1or more 4096 chips length preambles and 10ms or 20ms length message part.
Preamble 4096 chips Preamble 4096 chips Preamble Preamble Preamble Preamble Message part 10 ms (one radio frame) Message part 20 ms (two radio frames)
PRACH
Physical Random Access Channel
10ms message part is split into 15 timeslots, each timeslot consists of 2560chips. Each timeslot includes data part and control part. They are transmitted in parallel . Data part :SF=32~256 , control part: SF=256.
Data Control Pilot Npilot bits Tslot = 2560 chips, 10*2k bits (k=0..3) Data Ndata bits TFCI NTFCI bits
Slot #0
Slot #1
Slot #14
PICH
DL common physical channel AICH CCPCH PDSCH
DPCH
CPICH
CPICH
There is 2 types of CPICH:P-CPICH and S-PICH P-CPICH: P-CPICH of different cell uses the same Cch,256,0 OVSF code to spread ,the bit rate of P-CPICH is also fixed. The P-CPICH is scrambled by the primary scrambling code. There is one and only P-CPICH per cell. The P-CPICH is broadcast over the entire cell. it is used to search cell primary scrambling code during cell selection procedure. And it is also used for measurement and estimation during handover, cell selection and cell re-selection. S-CPICH: A arbitrary channelization code of SF=256 is used for the SCPICH. A S-CPICH is scrambled by either the primary or a secondary scrambling code. There may be 0,1 or several S-CPICH per cell. A S-CPICH may be transmitted over the entire cell or part of the cell. It is may be a phase reference for a dl DPCH, but it is decided by high layer signalling.
P-CCPCH
SCH (1)
The Synchronization Channel (SCH) is a downlink signal used for cell search. The SCH consists of two sub channels, the Primary and Secondary SCH. The 10 ms radio frames of the Primary and Secondary SCH are divided into 15 slots, each of length 2560 chips.
SCH (2)
P-SCH The Primary SCH consists of a modulated code of length 256 chips. The modulated code need not spreading and scrambling. The primary synchronization code (PSC) is transmitted once every slot The PSC is the same for every cell in the system. S-SCH The Secondary SCH consists of repeatedly transmitting a length 15 sequence of modulated codes of length 256 chips. the Secondary Synchronization Codes (SSC), transmitted in parallel with the Primary SCH. Each SSC is chosen from a set of 16 different codes of length 256. This sequence on the Secondary SCH indicates which of the code groups the cell's downlink scrambling code belongs to.
S-CCPCH
PICH
PICH carries PIPage Indication SF=256radio frame=10msconsists 300bits288 bits for paging indication 12 bits Tx Off PICH relates to S-CCPCH which mapping to PCH
288 bits for paging indication b0 b1 12 bits (transmission off) b287 b288 b299
Content
Classification of channels
Structure and Function of channels
Cell Search
UE has to get the system information before it registers with the network and access to services. The system information is beared in the BCH channel, and its data is mapped into the Primary CCPCH. So the cell search procedure is mainly to decode the data of P-CCPCH.
No. 511 Scrambling Code No.0 Primary Scrambling Code Group Group
No. 8176 No. 510 Scrambling Code 8176PSC 7 Scrambling Code Group 8177 Group 8177SSC No. 8160 8160 1 Scrambling Code No. 504112 8176PSC Scrambling Code Group Group 113 8177 8191 8161 8161 8191SSC 16 16PSC No. 0 Scrambling Code 8064 8064 Group 17 8065 127 8191 8065 8175 8175 17SSC 0 0PSC 31 31SSC 1 1SSC 8079 8079 15 15SSC
Synchronization acquired
Chip, Slot, Symbol Synchronization
Note
Synchronization 256 chips The same in all cells 15-code sequence of secondary synchronization codes. There are 16 secondary synchronization codes. There are 64 S-SCH sequences corresponding to the 64 scrambling code groups 256 chips, different for different cells and slot intervals To find the primary scrambling code from common pilot CH Fixed 30 kbps channel spreading factor 256
Secondar y SCH
Frame Synchronization, Code Group (one of 64) Scrambling code (one of 8) Synchronization, BCCH info
RACH procedure
UE decodes BCH to find out the available RACH sub-channels and their scrambling codes and signatures It selects randomly one of the available sub-channels and signatures The downlink power is measured and the initial RACH power level is set with a proper margin due to open loop inaccuracy UE transmits 1 ms long preamble with the selected signature Node B replies by repeating the preamble using Acquisition Indication Channel (AICH) UE decodes AICH message to see whether the NodeB has detected the preamble If AICH is not detected, the preamble is resend with 1 dB higher transmit power If AICH is detected, a 10 or 20 ms long message part is transmitted with the same power as the last preamble
RACH procedure