Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Point objects are useful as nodes or reference geometry for object snaps and relative offsets.
To set point style and size :
1. 2.
3.
4.
From the Format menu, choose Point Style. In the Point Style dialog box, select a point style. Under Point Size, specify a size, either relative to the screen or in absolute units. Choose OK.
From the Draw menu: - choose Point - Single Point. - Specify the point location. You can snap to a point using the Node object snap. Draw toolbar Command line : POINT @ PO
2.
2.
POLYLINE
Creates two-dimensional polylines.
1.
Draw toolbar:
2.
3.
DONUT
Draws filled circles and rings 1. Draw menu: Donut 2. Command line: donut
Specify inside diameter of donut <current>: Specify a distance or press ENTER
If you specify an inside diameter of 0, the donut is a filled circle.
Specify outside diameter of donut <current>: Specify a distance or press ENTER Specify center of donut or <exit>: Specify a point (1) or press ENTER to end the command
POLYGON
A polygon is an equilateral closed polyline with between 3 and 1024 sides. Creating polygons is a simple way to draw equilateral triangles, squares, pentagons, and hexagons.
RECTANGLE
Draws a rectangular polyline
1.
2.
2.
First Corner
Specifies a corner point of the rectangle. Specify other corner point or [Dimensions]: Specify a point (2) or enter d
Other Corner
X2
Dimension
8
15
Specify length for rectangles <0.0000> 15 Specify width for rectangles <0.0000> 8 Specify other corner point or [Dimensions] Specify a point; move the cursor to display one of four possible locations for the rectangle and
Chamfer
Sets the chamfer distances for the rectangle.
Specify first chamfer distance for rectangles <current>: Specify a distance or press ENTER Specify second chamfer distance for rectangles <current>: Specify a distance or press ENTER
Fillet
Specify the fillet radius of the rectangle.
Specify fillet radius for rectangles <current>: Specify a distance or press ENTER
Width
Specifies the polyline width of the rectangle to be drawn.
Specify line width for rectangles <current>: Specify a distance or press ENTER