Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
E-Home Automation
July 19, 2011
Presented by EM-2011-16
Group Members
Supun Hettiarachchi
Eranga Priyasad Kavinda Prabath Roshan Chandrasekara Amila Indrajith Susith Chamara Anton Sriyantha
Eranga Priyasad
DCN/10/c4/0790
Introduction
What is the main downfall of Energy Use nowadays? Thats Energy Wasting ! In future, the most needed Energy Source will be Electrical Energy. E-Home Automation is about : Developing an Automatic Light Switching System Developing an Flexible and Powerful Security System Main Purpose of our Project : Saving Electrical Energy used in home. Enhancing home Security System is also another purpose of our project.
Eranga Priyasad
DCN/10/c4/0790
Project Overview
Our project is mainly based on Automatic Person Counting System. This system can be used not only for a house, but also in buildings, trains, buses, flights, ships & many areas. We can use this Automatic Person Counting System to control any system of above areas. As an example for one of these systems, we use this Automatic Person Counting System in our project to develop an Automatic Light Switching System & a Security System.
Supun Hettiarachchi
DCN/10/c4/0844
Room 1
Room 4
Room 3
Supun Hettiarachchi
DCN/10/c4/0844
Automatic Person Counting System Our system keep track of entering & leaving person count. If some one enters to the room our system count it. And someone goes out system subtract it from the previous count.
Automatic Light Switching System Light Switching System work with the help of Person Counting System. If the person count is a non-zero value automatically lights will turn on. If the count is equal to zero lights will turn off. And our system allows to use manual system to turn on and turn off lights. This system help to save energy.
Security System Security System installed in main door. System will turn on when all the members went out.
Kavinda Prabath
BCN/10/c6/1245
Project Plan
Identify the main requirements. Design the main circuit according to the requirements. Implementing circuits & the system. Testing each module one by one & testing the entire system. Maintain & improving the performance of the system.
Susith Chamara
BCN/10/c6/1259
ID
Task
Start
Finish
Budget
1 2 3 4 5 6
Identify Requirements Design of Main Circuit Implementation of circuit & system Testing Maintenance Improving Performance
1 000/=
5 000/= -
2 000/=
2 000/=
Susith Chamara
BCN/10/c6/1259
Risks Identified
Misuse System Failure due to the circuit shortage Possibility of Electrocution System can respond in erratic way Economic Instability (loss of funding) Requirements Change Affect Quality or Performance of software
Roshan Chandrasekara
DCN/10/c4/0805
Technologies Used
10
Brain of this System are Micro Controllers, its fast & easy. We use high sensitive IR sensors to detect persons via other unwanted things. Day / Night Detection. Implementing system with user friendly interfaces. Low power consumption and high efficiency control system. Control system works in power failure. Design the system for easy problem identifying and easy to maintenance. Auto detecting security system.
Amila Indrajith
DCN/10/c4/0791
11
Issues : Miscalculation Does not work for small kids If manual switching is performed automatic switching will not work
Constraints : Assume only the humans walk through a door Assume only one person walk through a door at a time
Anton Sriyantha
DCN/10/c4/0807
12