Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Prepared By: Islam Selim Completion & Workover Engineer Rashid Petroleum Company Islam.Selim@Rashpetco.com
Outlines
The Smart Fields The Smart completion definition Why we need smart wells The Smart completion main components
Smart Fields
2.
Monitoring
(PDG) Permanent downhole measurement gauges
BY:
Down hole flow and pressure control can be achieved through the use of interval control valves (ICVs)
ICV
ICV refers to Inflow Control Valve A valve system that regulates flow through it by either hydraulic or electrical commands
Current Application
Commingled production
The use of ICVs to allow commingled production from zones with different pressures, through choking the inflow from the highest pressured zone with a continuously variable ICV, to avoid cross-flow to the lowered pressured zone
Commingled production
Commingled production
BHPs may be either: Static, in which pressures are recorded with the well shut-in Flowing, In a flowing survey the well is opened up to produce for a period with the gauge at the bottom of the hole Pressures are recorded during the flowing or drawdown period, and subsequently during a shut-in or buildup period Recording BHP provides information about the reservoir pressure, permeability around the well, Skin, and about the well's productivity
Occasionally permanent gauges may be installed at the bottom of a well, connected by an electrical cable to a surface readout Allows real time monitoring of bottom hole pressure without the need for down hole power, electronics or moving parts
Electronic downhole surface readout gauge is designed with state of the art surface read-out technology. The gauge sends pressure and temperature data from downhole to surface in the real time basis through one single conductor cable
Side Pocket Mandrel Gauge utilizes our robust electronic design with silicon-sapphire technology to measure pressure and temperature by working as a gas lift valve. The gauge housings are designed according to conventional 1 and 1.5 gauge , therefore, they can be set and retrieved by using standard side pocket mandrel tools.
The down hole Flowmeter provides accurate, realtime downhole flow measurement of liquid and/or gas Down-hole water-cut meters and densitometers It is designed for permanent downhole installation and is deployed as part of the production tubing during the completion
Conclusion
The Smart completion now in Mediterranean sea Down hole flow control (ICV) Real time reservoir monitoring (PDG)