Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
BEE
UOPS 3
RULES AND MECHANICS
H EAT
1 1 1 1
T R A N S FE R
2 1 2 1 1 2 2
&
IT’S
M E CHA N IS M S
1 3 2 3 2 2 2 3
QUESTION H 1
Answer:
CONVECTION
QUESTION E1
The Law of Heat Conduction is also known as
the __________.
Answer:
FOURIER’S LAW
QUESTION A1
If a Fluid is forced to flow past a solid surface
by any mechanical means it is called
_________?
Answer:
FORCED
QUESTION T1
The driving force in heat transfer is _________?
Answer:
TEMPERATURE
QUESTION N1
A Temperature difference of 85◦C is imposed across a fiber
glass layer of 13 cm thickness. The thermal conductivity od
the fiber glass is 0.035 W/m-◦C. Compute the heat
transferred through per hour per unit area.
Answer:
82.3846 kJ/hr-m²
QUESTION E3
One face of a copper plate 3cm thick is maintained at 400 ◦C
and the other face is maintained at 100 ◦C . How much heat
is transferred through the plate?
Given:
Tm = 386.12W/m-K Answer:
Required :
q/A 3.8612x10⁶W/m²
QUESTION M2
A furnace wall is constructed of firebrick 6 in. thick . The
temperature of the inside od the wall is 1300 ◦F and the temperature
od the outside of the wall is 175 ◦F. If the mean thermal conductivity
under these conditions is 0.17 BTU/h-ft- ◦F . What is the rate of heat
loss through 10 sq.ft of the wall.
Answer:
3825 BTU/hr
QUESTION A3
If the thermal conductivity of the fluid increases.
The overall heat transfer coefficient will
______?
Answer:
INCREASE
QUESTION R2
The Equation is called
Answer:
FOURIER’S LAW
EQUATION
QUESTION M1
When water inside a beaker is being heated over
a hot plate, the mechanism of heat transfer
through the water is considered to be _______?
Answer:
NATURAL
QUESTION T2
Calculate the heat loss per m2 of surface area for an
insulating wall composed of 0.0254-m-thick fibre insulating
board (k= 0.048 W/m•K), where the inside temperature is
352.7K and the outside temperature is 297.1K.
Answer:
33.30 BTU/h-ft²
QUESTION F
What is the correct formula for the rate of heat transfer (q) from a surface of body of the
area A to the surrounding fluid, when surface of the body is
at temperature Ts and the surrounding fluid is at temperature T∞?
Where,
k = conductivity of the body
h = coefficient of convection
d. copper
b. water
QUESTION I
In which phase of a substance does conduction
mode of heat transfer take place?
a. solid
b. liquid Answer:
Answer:
Second law of
thermodynamics
QUESTION S 1
d) Watt
d) Watt
Explanation: Unit of heat transfer is Joule but rate of
heat transfer is joule per second i.e. watt.
QUESTION N2
Which one is not the unit of thermal
conductivity?
a) kcal/m hr K Answer:
b) KJ/m hr K
c) W/m s K
c) W/m s K
Explanation: The unit kcal/m hr K could also be
specified as J/m s K or W/m s K and this is
d) Cal/cm s K actually done while quoting the numerical values
of thermal conductivity.
QUESTION R1
The process by which heat energy is transmitted
through collisions between neighboring atoms or
molecules?
Answer:
Conduction
QUESTION E2
The emission or transmission of energy in the
form of waves or particles through space or
through a material medium?
Answer:
Radiation
QUESTION S3
It is the reciprocal of resistance?
Answer:
Conductance
QUESTION S2
It is the mass transfer in a stationary solid or
fluids under a concentration gradient?
Answer:
Diffusion
THANK
YOU!
GODBLESS!
-GROUP 2-