Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
V1.0
Contents
2
Confidential▲
7
Confidential▲
• First to release full-series 16*10G PON&Combo • Slot bandwidth satisfies future 16*25G PON
PON, with maximum access capacity access without congestion
• The first to release symmetric 100G PON • Innovative concept of future-oriented access
sample network AO restructuring
Quantity of 17/15, including Ethernet 7, including Ethernet cards (2 by default) 36, including Ethernet cards (2 by default)
Service Slots cards (2 by default)
Service Cards GPON/XG-PON/XGS-PON/Combo PON/EPON/10G-EPON/TDM/Ethernet line cards
Function
Slot Card Supported Specifications
Area
1~9 Service card PON card, TDM line 9U service card slot
12~19 area card and Ethernet
interface card
10, 11 Switching card Switching & control 9USwitching & control card slot
area card
21 Clock interface Clock interface card Clock interface card slot, provide
card area such interfaces as clock input /
output interface, management
interface
Of them, 17 slots are service card slots, which can support GPON/XG-
PON/XGS-PON/Combo PON/EPON/10G-EPON/Ethernet line cards, etc. .
C650 shelf
Function
Slot Card Supported Specifications
Area
1~4 Service card PON card, TDM card 9U service card slot
7~9 area and Ethernet card
5, 6 Switching card Switching & control 9U switching & control card slot
area card
11 Clock interface Clock interface card Clock interface card slot, provide
card area such interfaces as clock input /
output interface, management
interface
ZXA10 C650 shelves provide 13 slots.
Of them, 1~4 and 7~9 service card slots can support GPON/XG-PON/XGS-
PON/Combo PON/EPON/10G-EPON/Ethernet line cards.
Card
Function
Slot Supporte Specifications
Area
d
1~9 Service card PON card, 9U service card slot
12~19 area TDM line
card and
23~41 Ethernet
interface
card
23 Fan area Fan subracks Fans subrack area can be divided into 3 parts: Fan
subracks in the top shelf and bottom shelf are 2U high,
ZXA10 C680 shelves provide 51 slots.
21-inch wide, configured as dual-row, 8 fans. Fan
Of them, service card slots can support
subracks GPON/XG-PON/XGS-PON/Combo
in the middle shelf are 2.7U high,PON/EPON/10G-
37.3mm
EPON/Ethernet line cards. wide, configured as dual-row, 2 fans. Fan subracks
support hot swapping.
21-inch shelf
Quantity of slots: 23
Slot 10 and 11: switching control card
17 service card slots
Slot 20, 22: power card
Slot 21: clock interface card, provide out-
band management interface, BITS clock and
1PPS+TOD clock interface
Slot 23: fan unit
18
ZXA10 C600 Card List Confidential▲
FAN-C600/21L-MA 21-inch ZXA10 C600 fan unit Embedded FCVD fan control card
FAN-C600/19L-MA 19-inch ZXA10 C600 fan unit Embedded dual-row 8 fans
support hot swapping
© ZTE All rights reserved 22 © ZTE All rights reserved
Functions and Principles of ZXA10 C600
Confidential▲
Name Specifications
USB interface, used for version data backup or
USB importing
CONSOLE RS232 serial port, used for local debugging
ODB RS232 serial port, used for card debugging
MGMT RJ45 interface, used for out-band EMS
RJ45 interface, service flow mirroring when used for
DIAG debugging
Module Function
Management Complete card configuration and
control module control management function
PON MAC Complete all functions of the PON layer
module defined by G.984.3
Realize data processing of the service
NP module layer
Provide GPON optical interfaces, to
Optical module satisfy G.984.2 standard requirements
Clock module Process system clock
Indicators-1
GFGH card has 2 types of indicators altogether, their
states represent different working states of the card.
Indicators-2
GFGH card has 2 types of indicators altogether, their
states represent different working states of the card.
Card
Name States Specifications
Type
Extracting cards is not allowed, if major
problems appear, including following states:
Green / yellow
·The card is in the CPLD upgrading process
indicators flash
·The card is in the BOOT burning process,
quickly in turn
extracting cards is not allowed under the
status
RUN Extracting cards is not allowed, if minor
problems appear, including following states:
Green / yellow ·It is commissioning configuration file during
indicators flash the starting process of the main control card
slowly in turn via USB
GFGH ·Save configuration data, and it is writing
memory
·The PON port is disabled
·The PON port isn't inserted with optical
Off modules
·The PON port isn't configured with ONUs,
The PON port and appears LOS
indicator
The green
The status of the PON port is normal
indicator is on
© ZTE All rights reserved The red The PON
28 port has
© ZTEbeen configured with
All rights reserved
Indicators-1
GFTH card has 2 types of indicators altogether, their states
represent different working states of the card.
Card Type Name States Specifications
Off The card isn't powered on
The green
indicator The card runs normally
flashes slowly
·The card is in the configuring process
The green
·The card is in the BOOT burning process,
indicator
extracting cards is not allowed under the
flashes quickly
status
·The card is in the version starting process
The green ·The card is in the BOOTROM program
indicator is on process
GFTH RUN ·The card is in the PLD upgrading process
The red If major card problems appear, such as
indicator is on hardware fault
The yellow
The software version of the card runs
indicator
abnormally
flashes quickly
The yellow
The card and configuration type are
indicator
inconsistent
flashes slowly
The yellow The card is in the BOOTROM program process,
© ZTE All rights reserved indicator is on 30 is not
extracting cards allowed at the time
© ZTE All rights reserved
ZXA10 C600 10G-GPON Interface Card-GFTH
Confidential▲
Indicators-2
GFTH card has 2 types of indicators altogether, their
states represent different working states of the card.
Card
Name States Specifications
Type
Extracting cards is not allowed, if major
problems appear, including following
Green / yellow states:
indicators flash ·The card is in the CPLD upgrading process
quickly in turn ·The card is in the BOOT burning process,
extracting cards is not allowed under the
status
RUN Extracting cards is not allowed, if minor
problems appear, including following
states:
Green / yellow
·It is commissioning configuration file
indicators flash
during the starting process of the main
slowly in turn
GFTH control card via USB
·Save configuration data, and it is writing
memory
·The PON port is disabled
·The PON port isn't inserted with optical
Off modules
·The PON port isn't configured with ONUs,
The PON port and appears LOS
indicator
© ZTE All rights reserved The green 31 © ZTE All rights reserved
The status of the PON port is normal
indicator is on
Confidential▲
Module Function
Management Complete card configuration and control
control module management function
PON MAC Complete all functions of the XG-PON
module layer defined by G.987.3
Realize data processing of the service layer,
NP module such as QoS processing, SLA, etc.
Provide XG-PON optical interface, to
Optical module satisfy G.987.2 standard requirements
Clock module Process system clock
Indicators-1
GFXH card has 2 types of indicators altogether, their
states represent different working states of the card.
Indicators-2
GFXH card has 2 types of indicators altogether, their
states represent different working states of the card.
Card
Name States Specifications
Type
RUN
GFBH
GFBH card provide 16-port GPON&XG-PON access, support clock
synchronization and 1PPS clock transferring
The card comprises management control module, PON MAC
module, NP module, optical module and clock module
Module Function
Management control
module Complete card configuration and control management function
Complete all functions of the GPON layer defined by G.984.3 and XG-
PON MAC module PON layer defined by G.987.3
Realize data processing of the service layer, such as QoS processing,
NP module SLA, etc.
GFBH Indicators-1
GFBH card has 2 types of indicators altogether, their
states represent different working states of the card.
Card Type Name States Specifications
Off The card isn't powered on
The green
indicator The card runs normally
flashes slowly
The green ·The card is in the configuring process
indicator ·The card is in the BOOT burning process,
flashes quickly extracting cards is not allowed under the status
·The card is in the version starting process
The green
·The card is in the BOOTROM program process
indicator is on
·The card is in the PLD upgrading process
GFBH RUN
The red If major card problems appear, such as hardware
indicator is on fault
The yellow
indicator The software version of the card runs abnormally
flashes quickly
The yellow
indicator The card and configuration type are inconsistent
flashes slowly
The yellow The card is in the BOOTROM program process,
© ZTE All rights reserved indicator is on 36 cards is
extracting not
© ZTE allowed
All rights reserved at the time
ZXA10 C600 GPON&XG-PON Combo Card -
Confidential▲
GFBH Indicators-2
GFBH card has 2 types of indicators altogether, their
states represent different working states of the card.
Card
Name States Specifications
Type
RUN
Module Function
management control Complete card configuration and control
module management function
PON MAC module Complete all functions of the PON layer
Realize data processing of the service layer, such as
NP module QoS, to satisfy SLA requirements
Provide EPON optical interfaces, to meet IEEE802.3
optical module and CTC EPON standard requirements
clock module Process system clock
Indicators-1
EFGH card has 2 types of indicators altogether, their
states represent different working states of the card.
Card Type Name States Specifications
Off The card isn't powered on
The green indicator
The card runs normally
flashes slowly
·The card is in the configuring process
The green indicator
·The card is in the BOOT burning process,
flashes quickly
extracting cards is not allowed under the status
·The card is in the version starting process
The green indicator
·The card is in the BOOTROM program process
is on
·The card is in the PLD upgrading process
EFGH RUN The red indicator is If major card problems appear, such as hardware
on fault
The yellow
The software version of the card runs
indicator flashes
abnormally
quickly
The yellow
indicator flashes The card and configuration type are inconsistent
slowly
The yellow The card is in the BOOTROM program process,
indicator is on extracting cards is not allowed at the time
© ZTE All rights reserved 39 © ZTE All rights reserved
ZXA10 C600 EPON Interface Card-EFGH
Confidential▲
Indicators-2
EFGH card has 2 types of indicators altogether, their
states represent different working states of the card.
Card Type Name States Specifications
RUN
Module Function
Management control Complete card configuration and control management
module function
PON MAC module Complete all functions of the PON layer
Realize data processing of the service layer, such as QoS,
NP module to satisfy SLA requirements
provide 10G-EPON optical interfaces, to meet IEEE802.3av
Optical module standard requirements
Clock module Process system clock
Indicators-1
EFTH card has 2 types of indicators altogether, their
states represent different working states of the card.
Card Type Name States Specifications
Off The card isn't powered on
Indicators-2
EFTH card has 2 types of indicators altogether, their states
represent different working states of the card.
Card Type Name States Specifications
RUN
Module Function
Complete card configure function, including traffic processing
part and optical module part, and at the same time, complete
Management control detection of the optical module's status
module
Realize data translation of the module and backplane bus, and
Switching module realize related functions of VLAN and Ethernet
Clock module Process system clock
Provide 10GE/GE optical port to connect the device at the
10GE/GE optical module opposite end
XFTO/XFTH Indicators-1
XFTO/XFTH card has 2 types of indicators altogether,
their states represent different working states of the card.
XFTO/XFTH Indicators-2
XFTO/XFTH card has 2 types of indicators altogether,
their states represent different working states of the card.
Card Type Name States Specifications
Extracting cards is not allowed, if major
problems appear, including following
Green / yellow states:
indicators flash ·The card is in the CPLD upgrading process
quickly in turn ·The card is in the BOOT burning process,
extracting cards is not allowed under the
status
RUN Extracting cards is not allowed, if minor
problems appear, including following
states:
Green / yellow
·It is commissioning configuration file
XFTO/XFTH indicators flash
during the starting process of the main
slowly in turn
control card via USB
·Save configuration data, and it is writing
memory
The green
The port is linked up (Link up)
indicator is on
Port The green
indicators indicator Data is being received / transmitted
flashes
© ZTE All rights reserved 46 © ZTE All rights reserved
Off The port is linked down
Confidential▲
Indicators-1
PFGK card has 2 types of indicators altogether, their
states represent different working states of the card.
Card Type Name States Specifications
Off The card isn't powered on
The green
indicator The card runs normally
flashes slowly
·The card is in the configuring process
The green
·The card is in the BOOT burning process,
indicator
extracting cards is not allowed under the
flashes quickly
status
·The card is in the version starting process
The green ·The card is in the BOOTROM program
indicator is on process
PFGK RUN ·The card is in the PLD upgrading process
The red If major card problems appear, such as
indicator is on hardware fault
The yellow
The software version of the card runs
indicator
abnormally
flashes quickly
The yellow
The card and configuration type are
indicator
inconsistent
flashes slowly
© ZTE All rights reserved 48 © ZTE All rights reserved
Indicators-2
PFGK card has 2 types of indicators altogether, their
states represent different working states of the card.
Card Type Name States Specifications
Extracting cards is not allowed, if major
problems appear, including following
Green / yellow states:
indicators flash ·The card is in the CPLD upgrading process
quickly in turn ·The card is in the BOOT burning process,
extracting cards is not allowed under the
status
RUN Extracting cards is not allowed, if minor
problems appear, including following
states:
Green / yellow
·It is commissioning configuration file
PFGK indicators flash
during the starting process of the main
slowly in turn
control card via USB
·Save configuration data, and it is writing
memory
The green
The port is linked up (Link up)
indicator is on
Port The green
indicators indicator Data is being received / transmitted
flashes
© ZTE All rights reserved 49 © ZTE All rights reserved
Off The port is linked down
Confidential▲
Module Function
Complete configuration, control management
Management control functions of each functional module inside the
module card
Complete 120Ω clock interface input and output
Clock / clock module processing
Maintenance interface Provide out-band EMS maintenance interface
Clock interface Provide input and output interfaces of clock
and Indicators
CLCT card has just one RUN indicator,
meanings of their states are shown as
below: