Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
A. Manger B. Surveyor
A. Manager
Drilling
DTQMP Quiz competition - JHARIA
A. 0.3 m B. 0.5 m
C. 1 m D. 0.6 m
D. 0.6 m
Drilling
DTQMP Quiz competition - JHARIA
D. All of these
Drilling
DTQMP Quiz competition - JHARIA
C. deviation of face
D. All of these
from center line
D. All of these
Drilling
DTQMP Quiz competition - JHARIA
A. hands B. Shovel
C. Scraper
Drilling
DTQMP Quiz competition - JHARIA
C. drag cut
Drilling
DTQMP Quiz competition - JHARIA
C. at least 5 m longer
D. None of these
than drill hole.
A. 28 mm B. 39 mm
C. 43 mm D. None of these
B. 39 mm
Drilling
DTQMP Quiz competition - JHARIA
A. 6 feet B. 7 feet
A. 6 feet
Drilling
DTQMP Quiz competition - JHARIA
A. leg B. Hand
B. Hand
Drilling
DTQMP Quiz competition - JHARIA
A. 6 mm B. 5 mm
C. 3 mm D. None of theses
C. 3 mm
Drilling
DTQMP Quiz competition - JHARIA
12. Before starting drilling, who will give clearance to the driller
that face has been declared safe with respect to dressing,
presence of gas & support of roof/side?
C. Mining sirdar
Drilling
DTQMP Quiz competition - JHARIA
D. All of these
Drilling
DTQMP Quiz competition - JHARIA
C. None of these
A. Clock wise
Drilling
DTQMP Quiz competition - JHARIA
D. All of these
Drilling
DTQMP Quiz competition - JHARIA
B. Grinder
Drilling
DTQMP Quiz competition - JHARIA
D. All of these
Drilling
DTQMP Quiz competition - JHARIA
B. wedge cut
Drilling
DTQMP Quiz competition - JHARIA
19. What is the tools for checking crack inside the shot
hole?
B. Crack detector
Drilling
DTQMP Quiz competition - JHARIA
D. All of these
Drilling
DTQMP Quiz competition - JHARIA
A. True B. False
A. True
Drilling
DTQMP Quiz competition - JHARIA
22. No drill bit shall be used for boring a shot hole unless it
allows a clearance of at least 0.3 centimetre over the diameter
of the cartridge of explosive which it is intended to use.
A. True B. False
C. True
Drilling
DTQMP Quiz competition - JHARIA
A. True B. False
A. True
Drilling
DTQMP Quiz competition - JHARIA
A. True B. False
A. True
Drilling
DTQMP Quiz competition - JHARIA
25. Driller shall not leave the machine at any blind heading,
floor or watery place.
A. True B. False
A. True
Drilling
DTQMP Quiz competition - JHARIA
A. True B. False
A. True
Drilling
DTQMP Quiz competition - JHARIA
A. True B. False
A.True
Drilling
DTQMP Quiz competition - JHARIA
A. True B. False
A. True
Drilling (SDL/LHD Crew/Associate
DTQMP Quiz SDL/LHD Crew)
competition - JHARIA
Hazard: Roof & Side, Inflammable & Poisonous gas, Oxygen deficiency, Slip, Trip & Fall, Drill m/c,
fall of object
Do’s
1. Use all the mandatory PPE including shin bone (Knee) guard, Dust mask
2. Check the drill rod for straightness.
3. Check drill bit tips, size and sharpness
4. Check & mark center line and grade line.
5. Mark the hole as per approved drilling pattern.
6. Fastened drill bit with the drill rod using steel wire.
7. Check clock wise rotation of the drill M/c.
8. Insert the drill rod in the drill m/c chuck and lock it using the locking knob provided in the drill m/c.
9. Support drill cable or hose pipe properly.
10. Spray water within 90 m from face
11. Support the roof & side before face drilling up to 0.6 m from face.
12. Maintain length, direction & inclination of hole as per pattern.
13. Maintain spacing of the hole as per pattern. ( The distance between two consecutive holes of same delay should not be less
than 0.3 m through out the entire length of hole.)
14. The spacing between two hole of different delay should not be less than 0.6 m.
15. Maintain direction of top row hole, 0.3 m below roof & 0.3 m away from side at end of drill hole.(to prevent roof /side from
damage)
16. The cleaning of hole mouth shall be done by scraper (KIRICH)
17. Watery hole shall be plugged by wooden pegs.
18. keep the drill machine at a safe & slightly elevated place out-by of the face.
19. Drill the reliving hole at a distance more than 0.3 m in same direction/angle of misfire hole in presence of Supervisor.
Drilling (DTQMP
Dresser/Stone Cutter/SDL/LHD
Quiz competition - JHARIA Crew)
Hazard: Roof & Side, Inflammable & Poisonous gas, Oxygen deficiency, Slip, Trip & Fall, Drill m/c,
fall of object
DON’TS
1. Sharpen bit by driller without authorization.
2. Start drilling in face till face supported up to 0.6 m from face.
3. Start drill in face without marking centre line grade line and marking of hole by supervisor.
4. Use the drill m/c whose locking knob is damaged or not functioning properly.
5. Leave the drill machine at any blind heading, floor or watery place.
6. Drill hole in socket. Misfired hole, under cut hole.
Drilling
DTQMP (Supervisor)
Quiz competition - JHARIA
Hazard: Face, Roof & Side, Inflammable & Poisonous gas, Oxygen deficiency, Slip,
Trip & Fall
Do’s
Drilling (Supervisor)
DTQMP Quiz competition - JHARIA
Hazard: Face, Roof & Side, Inflammable & Poisonous gas, Oxygen deficiency, Slip,
Trip & Fall
Don’ts
1, Leave the machine at any blind heading, floor or watery place.
2. Drill hole in socket
Drilling
DTQMP Quiz competition - JHARIA
Do’s Don’ts
1. 1.
2. 2.
3. 3.
4. 4.
5. 5.
6. 6.
7. 7.
8. 8.
9. 9.
10. 10.