100%(2)Il 100% ha trovato utile questo documento (2 voti)
556 visualizzazioni24 pagine
ToolboxST is a software used to configure and troubleshoot MarkVIe controllers. It stores all configuration files for a site on one HMI server. The files are located in folders matching the site name on the M: drive. ToolboxST requires a USB dongle to run. The system editor allows viewing and editing components, while the component editor configures a specific MarkVIe controller. It is important to verify the controller is in controlling state and equal to the DDR when online.
ToolboxST is a software used to configure and troubleshoot MarkVIe controllers. It stores all configuration files for a site on one HMI server. The files are located in folders matching the site name on the M: drive. ToolboxST requires a USB dongle to run. The system editor allows viewing and editing components, while the component editor configures a specific MarkVIe controller. It is important to verify the controller is in controlling state and equal to the DDR when online.
ToolboxST is a software used to configure and troubleshoot MarkVIe controllers. It stores all configuration files for a site on one HMI server. The files are located in folders matching the site name on the M: drive. ToolboxST requires a USB dongle to run. The system editor allows viewing and editing components, while the component editor configures a specific MarkVIe controller. It is important to verify the controller is in controlling state and equal to the DDR when online.
the MarkVIe controller ToolboxST deals with all Mark Ve components for a site in one program ST- System Technology
Energy Learning Center # 3 /24 g
Vocabulary
Energy Learning Center # 4 /24 g
Licensing
ToolboxST requires no license to install
The ToolboxST application will not start without a USB UPD key The drivers for the UPD key are included with ToolboxST. ToolboxST must be installed before inserting the UPD for the first time.
Energy Learning Center # 5 /24 g
ToolboxST Configuration Files Location
All of the files reside on one HMI server usually
the EWS. All other HMI servers map to the EWS. This is the M:\ drive UDH
EWS HMISVR1 HMISVR2
Markvie M:\
Energy Learning Center # 6 /24 g
ToolboxST Configuration Files Location - 2
The ToolboxST files are located M:\xxx\xxx.tcw
Where xxx is the site name Note: the folder name and .tcw name must match! ie SCEG Each device has its own folder. Do not try to edit .xml files Do not manually move files using windows explorer
Energy Learning Center # 7 /24 g
ToolboxST System Editor
The system editor contains all of the devices in
your configuration. To start the system editor > Start > Programs > GE ControlST > ToolboxST > ToolboxST Energy Learning Center # 8 /24 g ToolboxST System Editor - 2
Energy Learning Center # 9 /24 g
System Editor Areas
Energy Learning Center # 10 /24 g
Component Icons
Energy Learning Center # 11 /24 g
Configuration Files
Energy Learning Center # 12 /24 g
System Editor Options
Options that affect all components on a system
level To configure the system editor options > Open the System editor > Select Options > Select Settings
Energy Learning Center # 13 /24 g
System Editor Options -2 Autobackup- creates a backup xml file when the system is changed Maximum Build errors – total number of errors allowed during a build before the build stops Energy Learning Center # 14 /24 g ToolboxST Component Editor
The Component editor is used to Configure and
troubleshoot a MarkVIe controller To open a MarkVIe controller component editor > Double click on the controller icon from the tree view of the system editor
Energy Learning Center # 15 /24 g
Component Editor Areas
Energy Learning Center # 16 /24 g
Summary View Area
The information in the summary view tracks the
item selected in the tree view
Energy Learning Center # 17 /24 g
Property Editor Area Property Editor allows you to view and edit the properties of a selected item in the tree view
Energy Learning Center # 18 /24 g
Changing the Property value of an object
From the property editor click in the
value field > Click the ellipsis button to change the value thru a dialog box > Click the drop down button to change the value thru a drop down box > Or enter text or numbers directly into the field
Energy Learning Center # 19 /24 g
Component Info View Area
Log tab – displays messages related to user
commands or system events Status Tab – Displays operating state and equality information from a MarkVIe controller
Energy Learning Center # 20 /24 g
Component Info View Area - 2
History Tab – Keeps a navigation history for each
user session Where Used Tab – tracks variables selected in the tree view or summary view and lists other places in the software where the variable is used
Energy Learning Center # 21 /24 g
Component Info View Area - 3
Find Results Tab – Displays the results from the
finder Info Tab – Displays Help information if available for the item selected in the tree or summary view
Energy Learning Center # 22 /24 g
Connecting to a Controller
From the component editor toolbar
click on the online button If the controller is redundant you will get this type of dialog box allowing the user to select what processor to connect
Energy Learning Center # 23 /24 g
Verifying Controller State and Equality It is important to verify the controller state = controlling It is also important to verify that the controller and DDR equality = Equal