Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Training Sytems
INVERTER
INVERTER ATV312
Getting Started ATV310
3
Wiring
ATV312
Apply power to the drive
5
Connect Control Wiring And
Select Control Configuration
6
Set control choice
7
Setting Basic Parameter Setting Basic Parameter
Sesuaikan dengan kebutuhan
Sesuaikan dengan yang di nameplate motor.
Menu Structure
9
UNINTENDED EQUIPMENT OPERATION
• The Nominal Motor Parameters UnS, FrS, nCr, nSP, nPr and
COS must be correctly configured before starting auto-tuning.
• If one or more of these parameters is modified after auto-tuning has
been performed, tUn will return to nOand the procedure must be
repeated
Failure to follow these instructions will result in death or serious injury.
11
INVERTER ATV320
W I R I N G AT V 3 2 0
• Connect the drive to the ground.
• Verify circuit breaker rating or fuse rating (see SCCR annex NVE21777
• Verify that the nominal motor voltage is compatible with the drive voltage. Nominal motor voltage ______volts.
• Connect the drive to the motor.
• Connect the drive to the supply mains.
Connect The Drive: Control by External Reference ( Fr1= Al1)
Apply Ensure that used digital Inputs are not active (DI1, DI2 see step
diagram above).
15
Set motor parameters for asynchronous motor
Refer to the motor Nameplate for the following parameters settings .
Set basic parameters
Menu Structure
18