Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
© Copyright 2014 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice.
LPD and Engine Speed Configuration important Support Info
• THE BEST WAY TO CONFIGURE LPD is to connect unit to internet and let it do it AUTOMATICALLY
• These engines have multiple speed SKUs for each engine base, engine speed is generic (slowest) when
shipped
• For ALL EMU1’s/EMU2’s, Production , LPD does not have to be set for the unit to function
• LPD: engine speed should be set when device is unboxed and first installed
• Engine Speed Configuration is provided from HP cloud service to printer formatter as an LPD license
– License will contain values of model name and speed and is stored on MSOK / Formatter / IOD
– License is signed by HP and validated by firmware
– License is locked to a specific printer via HP immutable identity and HP serial number (can not be changed /upgraded
later)
– Device will continue to look for speed setting until set whenever it is booted
• Will check for USB after boot once just after UI ready
• Will then look to cloud once per minute for 10 minutes right after the USB check
– HP immutable identity is tied to a private key and secure (stored on a TPM on the device MSOK)
– If unit connected to internet is behind a firewall using a Proxy server and port address , this will need to be configured
in EWS or the control panel prior to using the cloud LPD (automatic ) process.
• After the LPD license is installed, all customer settings on the device will be set back to the factory defaults
© Copyright 2014 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice.
LPD (configuration steps updated for EMU 1.5 and 2)
• Connect Printer to Internet, boot printer, Our FW will find the LPD automatically
or you can download the LPD license
© Copyright 2014 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice.
Continued LPD off line USB Process
Boot MFP
• Boot Printer to ready state, and view or print a configuration page to verify LPD
Status
• LPD status will take about 30s after ready state to be viewable on Config page
• LPD status should read – “LPD: not configured (#,#.#)”
• Power down Printer
• Place USB drive with LPD license in Formatter USB Slot (or HIP USB)
• Boot Printer Again
• The printer will boot twice during a successful LPD, The startup wizard will show after 2nd
reboot,
• Print or view Configuration Page and verify LPD speed and model number has
been updated
• Should now read in config page as “LPD : Configured”
© Copyright 2014 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice.
Logins for partner portal (recommend using chrome)
na_busi_pfpppu1@ppsdns.com Passport _1
na_dis_pfpppa1@ppsdns.com Passport _1
na_oem_pfpppa1@ppsdns.com Passport _1
© Copyright 2014 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice.
https://jamactivation.com and
https://activation.jamanagement.hp.com/#/
In the next few days, our LPD test cloud site will
have implemented the HP Partner Portal login
requirement when a user wants to pull a license for
a device. When you hit this page, you will be re-
directed to HP Partner portal for a login
© Copyright 2014 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice.
https://activation.jamanagement.hp.com/#/
© Copyright 2014 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice.
https://activation.jamanagement.hp.com/#/
© Copyright 2014 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice.
Proxy Configuration via EWS or Control Panel ( your server and
port may be different than ours in Boise below)
© Copyright 2014 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice.