PANEL INTRODUCTION: Buildings with mud brick wall RC frames are the most common type of structures used for multistory constructions in all over the world. Masonry is one of the most popular and economical construction materials. In recent years most of the countries started using different types of bricks as infill material especially in seismically active regions one of that is semi-interlocked masonry (SIM) see fig 1.This semi- Fig 1: Double strut nonlinear cyclic model Fig 4:Comparison of Response Reduction Factor for Interlocking brick system in building works Different frames is a fast and cost effective construction system and provides good solution in ANALYTICAL MODELING: construction. Hence there is a need to Literature provides different approaches in determine the effectiveness of using macro modeling such as equivalent diagonal interlocking brick in construction system. single strut or triple strut model. In this study double strut nonlinear cyclic OBJECTIVES: model is used to represent the brick masonry It is very important to understand the infill in seismostruct software. behavior of masonry infill frame structures Pushover analysis is performed on 1) Bare under earthquake loads. This study presents frame 2) Partial infilled frames 3) full infilled an analytical work performed on reinforced frames. concrete (RC) frames with different types of Fig 2: Pushover curves of different frames masonry infill walls, namely standard bricks and semi-interlocked bricks. CONCLUSIONS: PROBLEM STATEMENT: Ductility is higher in SIM infilled frame as For this study, a 5-storey with 5 bays two compared to URM infilled frame. dimensional frame (Each span 4 m) and R Factor is maximum in SIM infilled frame as floor height 3.0m, regular in plan is compared to URM infillled frame considered. This frame is considered to be SIM panel acts as a energy dissipation device situated in seismic zone ‘v’ and modeled in structure because it dissipates more energy using seismostruct software. through relative shear sliding mechanism SIM infilled frame gives fast & economic construction as compared to URM infilled frame. Fig 3:Comparison of Ductility for Different frames
Mangeshkumar Shendkar1 and Ramancharla Pradeep Kumar2