Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
R N S INSTITUTE OF TECHNOLOGY
DEPARTMENT OF MECHANICAL ENGINEERING,
BENGALURU- 560098
April 2019
First para- Importance of the present work; Literature Gap; Project objectives.
Second para- Project methodology for carrying out the proposed project objectives,
Materials / Methods / Processes involved; Experimental / Analytical / Numerical
methods involved.
Example:
Review of Literature [1-20] cited the importance and various applications of polymer
nanocomposites outlining the need for examination of nanoclay dispersion in polymers and
their influence on moisture diffusion, mechanical properties under severe service conditions.
A detailed study of polymer nanocomposites under hygrothermic conditions is not reported
and the degradation behavior not studied. Hence, the main objective of this research was to
experimentally investigate the effects of hygrothermal ageing on long-term durability,
moisture diffusion, and fatigue and fracture behaviour of FRP nanocomposites. The present
study was an attempt to investigate the effects of exposure in hygrothermal environment at
60 °C on the moisture diffusion behaviour and mechanical properties of Cloisite-15A /
Vinylester / E-glass nanocomposites.
DEPT. OF MECHANICAL ENGINEERING, RNSIT 5
1.2 Project Objectives
Specific objectives need to be highlighted..
1.3 Report Organization
The results of the experimental and analytical studies of “ Title of the project” are presented as
Five/Six chapters:
Example:
Chapter 1 Introduction presents review of literature on the effects of hygrothermal ageing on fibre
reinforced polymer nanocomposites…..
Chapter 2 Project Methodology presents the methodology adopted to achieve the project objectives.
Chapter 3 Experimental / Numerical / Analytical presents…
Chapter 4 Results and discussions presents….
Chapter 5 Conclusions presents…
5.1 Concluions
Conclusion (should contain the key results/ inference / key conclusions
/outcomes in terms of points and not in the form of tables, graphs etc, nor
should it have any references.)
Next para should indicate the Future Scope….
NOTE: A hardcopy of project guidelines should always be there with the group
while making the report…
Thank you….
DEPT. OF MECHANICAL ENGINEERING, RNSIT 13