Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Submitted by
ABSTRACT
Finalizing Mechanisms
Project Design
Parts Procurement
Parts Fabrication
Project Assembly
Testing
Finalizing Mechanisms
Step 1: Make a list of required hardware outputs
Step 2: Examine the mechanism architecture
Step 3: Select the architecture
Step 4: Identify Motion Needs
Step 5: Start searching for mechanisms & Parts
Step 6: Examine Costs and Power Constraints. ...
Step 7: Check part availability
Step 8: Calculate Sizes
Step 9: Fabricate parts
Project Design
Mechanical Design or Machine Design is one of the important
branches of Engineering Design. To understand what exactly machine
design or mechanical design is let us consider the example of the
gear box of the car. The gear box transmits the motion and the
power of the engine to the wheels of the vehicle. The gearbox
comprises group of gears which are subjected to not only motion but
also the load of the vehicle. For the gears to run at desired speeds
and take desired loads it is important that they should be designed.
Parts Procurement
Fabrication Processes:
• Turning • Welding
• Boring • Drilling
• Threading • Metal Cutting
• Cutting • Threading
Project Assembly
Metal body
Links
Drilling machine
Fasteners
Drilling machine
Drilling is a cutting process that uses a drill bit to cut a hole of circular cross-section in solid
materials. The drill bit is usually a rotary cutting tool, often multi-point. The bit
is pressed against the work-piece and rotated at rates from hundreds to thousands
of revolutions per minute. This forces the cutting edge against the work-piece, cutting
off chips (swarf) from the hole as it is drilled.
Fastener
A fastener (US English) or fastening (UK English) is a hardware device that mechanically
joins or affixes two or more objects together. In general, fasteners are used to create
non-permanent joints; that is, joints that can be removed or dismantled without
damaging the joining components. Welding is an example of creating permanent
joints. Steel fasteners are usually made of stainless steel, carbon steel, or alloy steel.