Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Core
TEMENOS EDUCATION CENTRE
NOTICE
These training materials are the copyrighted work of Temenos Headquarters SA and other companies in
the TEMENOS group of companies (The Copyright Owner). The training materials contain protected
logos, graphics and images. Use of the training materials is restricted solely for use by licensed end
users, partners and employees. Any un-licensed reproduction by any means, redistribution, editing,
transformation, publishing, distribution, or public demonstration of the training materials whether for
commercial or personal gain is expressly prohibited by law, and may result in severe civil and criminal
penalties. Violators will be prosecuted to the maximum extent possible. Such training materials shall not
be represented, extracted into or included in part, or in whole, as part of any other training documentation
without the express permission of the Copyright Owner, which must given in writing by an authorised
agent of the Copyright Owner to be valid. Where such permission is given a clear and prominent notice
must be displayed on any and all documentation accrediting the Copyright Owner with having copyright
over the materials. End-user licenses will in no event contain permissions extending the use of these
training materials to third parties for commercial training purposes.
Without limiting the foregoing, copying or reproduction of the training materials in part or in whole to any
other sever or location for further reproduction or redistribution is expressly prohibited, unless such
reproduction is expressly licensed by the Copyright Owner.
Copyright © 2010 Temenos Headquarters SA
Arrangement Architecture - Core- Objectives
Designing a Product
Product Line, Product Group, and Products, Proofing and Publishing
Inheritance in a Product Family
Slide 2
Product Designing & Servicing
Accounts Mortgages
Product Definition
Product Definition
Product Servicing
Product Servicing
Reusability is limited
Innovation is difficult
3
T24 – Past, till Arrangement Architecture
AC MG
MG.PARAMETER, MG.TXN.TYPE.CONDITION
Group Condition Tables
MG.MORTGAGES
ACCOUNT
MM/LD AZ
LMM.INSTALL.CONDS/ D.TXN.TYPE.CONDITIONS AZ.PRODUCT.PARAMETER
MM.MONEY.MARKET/ LD.LOANS.AND.DEPOSITS AZ.ACCOUNT
4
An Alternative Approach
Payment Schedule Payment Schedule Payment Schedule Payment Schedule Payment Schedule Payment Schedule
Attributes Actions Attributes Actions Attributes Actions Attributes Actions Attributes Actions Attributes Actions
Limit Limit
Attributes Actions Attributes Actions
Limit Limit
Attributes Actions Attributes Actions
Product Components
Customer Officer Limit Account Accounting
Attributes Actions Attributes Actions Attributes Actions Attributes Actions Attributes Actions
Activity Restriction Activity Mapping Activity Presentation Activity Messaging Activity API
ATTRIBUTES
Attributes Actions ACTIONS
Attributes Actions Attributes Actions Attributes Actions Attributes Actions
•Rate Term Amount •Change Payment Schedule Payment Rules Overdue Payoff
Attributes Actions Attributes Actions Attributes Actions Attributes Actions Attributes Actions
•Margin •Accrue
•Day Basis Interest •Capitalise Charge Activity Charge Payout Rules Tax
Attributes Actions Attributes Actions Attributes Actions Attributes Actions Attributes Actions
•Accrue Method •Reset
Change Product Closure Alerts Settlement Periodic Charges
……etc
Attributes . Actions
.......etc
Attributes Actions Attributes Actions Attributes Actions Attributes Actions
Product Components
Customer Officer Limit Account Accounting
Attributes Actions Attributes Actions Attributes Actions Attributes Actions Attributes Actions
Activity Restriction Activity Mapping Activity Presentation Activity Messaging Activity API
Attributes Actions Attributes Actions Attributes Actions Attributes Actions Attributes Actions
Slide 9
Organisation of BMW’s Product Catalogue
Product Line (Cars)
Product Groups
Product Derivatives
Slide 10
Product Building Structure - Advantages
Slide 11
Cars vs Financial Products
Product
ProductLine
Line(Lending)
(Cars)
Product Groups
10 Year Sole
Product Derivatives
Fixed Trader
Base Rate
Tracker
Floating
Arrangement Architecture
Slide 12
Retail Banking Overview
Slide 13
Retail - Overview
Banking products
Savings Nostro
A/c A/c
Over drafts
Lending Arrangements
Deposit Arrangements
Account Arrangements
Slide 14
Building Blocks
Slide 15
Components and Property Classes
Attributes
Common features of a Component across different Products
Actions
Common behaviour of a Component across different Products
PROPERTY CLASS in AA
Slide 16
Property Class
Wheels Interest
Slide 17
Properties vs Property Classes
Front
Type = Radial Principal Type = Fixed
Wheel
Radius = 7” Interest Rate = 5%
Wheel Interest
Rear
Wheel Type = Radial Penalty Type = Fixed
Radius = 8” Interest Rate = 6%
PROPERTY in AA
Slide 19
Product Lines and Property Classes
PRODUCT LINE
Slide 20
Product Lines and Product Groups
Loan Deposit
Product Line Product Line
Slide 21
Product Lines and Product Groups
A Product Group must have at least one Property for every Mandatory
Property Class of its Product Line
Slide 22
Product Groups and Products
Loan Product
Line
Business
Mortgage Loan
Product Product
Group Group
Working
Annuity Linear
Term Loan Capital
Mortgage Mortgage
Loan
Slide 23
Product Conditions
Slide 24
Product Definition - Summary
Property Class
Product
Product
ProductGroup
Line
Product Property
Property Class Attributes
Condition
Named types of
Specific values of
Sub set of
Slide 25
Product Definition - Summary
TEMENOS Maintained
Property Class
Product Line Property Class Attributes
Named types of
Sub set of
User Definable
Slide 27
Quiz 1 – Choose the correct Answer
5. What is an Attribute ?
a) Common condition used for every Product Line
b) Common features defined for every Property Class
c) Common functionality defined in every Product Group
Slide 28
Arrangement and Product Hierarchy
Slide 29
Product Inheritance
Slide 30
Product Hierarchy – Financial Illustration
Product
Lending At Product Line level, Temenos specifies which
Line Property Classes are mandatory and which are
Term
Term Amount
Amount
optional
Payment Schedule
Payment Schedule
Payment
Payment Rules
Rules
Accounting
Accounting
At Product Group level , User can define
Customer
Customer the Properties (named types of Property
Interest
Interest Classes), and specify which of these are
Charge
Charge mandatory and which are optional
Activity Restriction An optional property class can now
be made to have a mandatory
Property and not vice versa
Product Mortgage Properties
Group
Commitment
Repayment Schedule
Repayment
Principal Decrease
For the Mortgage Product Group we
Accounting have specified that :
Customer •2 named types Interest property class
Principal Interest •2 named types of the Charge property
Penalty Interest class
New Arrangement Fee
•2 named types of the Activity
Restriction property class
Payoff Fee
Disbursement Rules
Prin Decrease Rules
Slide 31
Product Hierarchy – Financial Illustration
To create an individual Product, we must assign a
Product Product Condition to each Property required by the Product Group
Lending
Line Term Amount
Term Amount
Payment Schedule Loan Principal
Payment Rules 25 yr Mortgage
Accounting Heloc
Customer
Interest
Charge
Activity Restriction
Slide 32
Product Hierarchy – Financial Illustration
Product
Lending
Line Payment Schedule
Term Amount
Payment Schedule Constant Monthly
Payment Rules Linear Monthly
Accounting Interest Monthly
Customer Constant Bi Weekly
Interest Constant Seasonal
Charge
Activity Restriction
Slide 33
Product Hierarchy – Financial Illustration
Product
Lending
Line Payment Rules
Term Amount
Payment Schedule Repay By Bill
Payment Rules Repay By Property
Accounting Repayment
Customer Principal Decrease
Interest
Charge
Activity Restriction
Slide 34
Product Hierarchy – Financial Illustration
Product
Lending
Line Accounting
Term Amount
Payment Schedule Lending
Payment Rules
Accounting
Customer
Interest
Charge
Activity Restriction
Slide 35
Product Hierarchy – Financial Illustration
Product
Lending Product
Line
Term Amount
Payment Schedule
Payment Rules 25 yr Fixed
Accounting
Customer
Rate Mortgage
Interest
Charge
Activity Restriction
Slide 36
Product Hierarchy – Financial Illustration
Mortgage At the highest level we can set up an “inheritance only”
product which cannot be sold and exists for inheritance
purposes only
Penalty Int INT.2
Initial Fee CHG.A1 Here, we define the properties which we expect to be
inherited by all lower level products
Payment RulesPR1
Overdue OD.1 In the case of “inheritance only” products, there is no
need to define a Product Condition for all mandatory
properties for the Product Group
Open Term Mortgage Flexible Mortgage
Principal PRIN.OT1 Principal PRIN.FM1
Interest INT.1 Interest INT.10
At sub product level only those conditions
that differ from the parent need to be defined.
All other conditions will be inherited from the
parent. Additional optional conditions can
Repayment REPAY.OT Repayment REPAY.FM
also be added at the sub product level
Payment Rules PR1.OT
Overdue OD.FM
Annual Fee CHRG.M2 Annual Fee CHRG.M3
Overdue OD.0
Annual Fee CHRG.CI1
Pre Payment TXNRUL.3
Slide 37
Products and Arrangements
Customer Product
Arrangement
Slide 38
Relationship between Products and Arrangements
TEMENOS Maintained
Property Class
Product Line Property Class
Attributes
Named types of
Sub set of
Product
Product Property
Condition
Bank Definable
Specific instances of
Arrangement
Arrangement
Conditions
Customer Specific
All share a common set of attributes
Slide 39
Quiz 2 – Choose the correct Answer
Slide 40
Product Builder and Catalog
Slide 41
Product Builder and Catalog - Overview
Product Lines
AA Products Accounts
Deposits
Internet Services
Retail Lending
modules AC,
Others
AZ, LD and
MG Proxy Services
Product Groups
AA Product Catalog
AC$ACCOUNTS
Builder
AZ$FIXED.DEPOSIT
LD$LOAN
Other T24
FOREX
modules
PERSONAL.LOANS
FT, FX, SC,
etc
Products
Non T24 Current Account
products Personal Loan
Spot
Slide 42
Product builder features
Slide 43
Product building process - Basic features
Slide 44
Product building process - Basic features
Slide 45
Product Builder and Catalog – Navigation
Slide 46
Product designer
Slide 47
AA Product builder – Navigation tools
Record viewing
Record Ids & editing area
Slide 48
AA Product builder – Navigation tools
View record
Edit record or
Update description
Slide 49
AA Product builder – Navigation tools
New instance
Internal are Bank’s products
Drill down to instances available for sale
External are other products for
comparison. Not for sale
Slide 50
Building Reusable Components
Slide 51
AA - Tables used for building components
52
AA.PROPERTY.CLASS
Slide 53
AA.PROPERTY.CLASS
If FORWARD.DATED is indicated
Allows users to define conditions to be applicable on a later date at the
Arrangement level
If ARRANGEMENT is indicated
A new arrangement condition is applied to this property every time an
Activity affects it, provided negotiation is allowed at product condition level
If TRIGGER is indicated
The property will appear in the arrangement screen only when activity
affecting this property class is invoked
Slide 54
AA.PROPERTY.CLASS
Slide 55
AA.PROPERTY.CLASS.ACTION
Slide 56
Workshop – 1 Viewing Property class attributes
Use Admin Menu > Product Builder > Property Classes and Properties
> CUSTOMER
View the record existing under this pre defined Property class
View details in Tab sections Details
Discuss the basic attributes defined by TEMENOS for this Property class
Use Admin Menu > Product Builder > Property Classes and Properties
> TERM.AMOUNT
View the record existing under this pre defined Property class
View details in Tab sections Details
Discuss the basic attributes defined by TEMENOS for this Property class
Slide 57
Solution – 1 Viewing Property class attributes
Slide 58
AA.PROPERTY
Slide 59
Workshop–2 Creation of Customer property
Use Admin Menu > Product Builder > Property Classes and Properties
> CUSTOMER
Create a new Property for CUSTOMER Property class
Slide 60
Solution – 2 Creation of Customer property
Slide 61
Product Conditions
Associated
Property Class
Attributes
Product
Property condition
Product
Slide 62
AA.PRD.DES.<PROPERTY.CLASS>
Slide 63
AA.PRD.DES.<Property Class>
If Property class has TYPE set to CCY, then its Product conditions would
be currency specific
Slide 64
AA.PRD.DES.<Property Class> - Currency
Assumptions:
1. TRG Product contains a property that is of TERM.AMOUNT type
2. TRG Product supports USD and GBP
Slide 65
AA.PRD.DES.<Property Class> - Effective Date
Effective Date is the date on which Product Condition values take effect
for a Product
If associated Property class has TYPE set to DATED then its Product
conditions will be Date specific
All Property Classes have a Type set to DATED so that Product conditions
could have an effective date
Slide 66
AA.PRD.DES.<Property Class> - Effective Date
2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 …
Slide 67
AA.PRD.DES.<Property Class> - Id - Summary
Slide 68
Product Conditions – Example
25 Y for Term
No for Revolving
No for Update of Limit
Slide 69
Negotiation rules
Slide 70
Negotiation rule
Attribute “AMOUNT”
Option “NEGOTIABLE”
Type = MAXIMUM 500,000
Message ERROR
Type = MINIMUM 25,000
Message OVERRIDE
Slide 71
Negotiation rules – Default Negotiable
DEFAULT.NEGOTIABLE
Options: Yes and No. Mandatory field
Defines whether all attributes (Fields) of the Property Class can be
Negotiated or not – at top level
Attribute level negotiation rules will always override this setting
UPDATE.COMMT.LIMIT and REVOLVING Fields set as Non-negotiable
Slide 72
Negotiation rules - Attribute
NR.ATTRIBUTE
Specifies the attribute of Property Class, for which Negotiation rule is
defined in associated Fields NR.NEGOTIABLE through to NR.MESSAGE
Must be a valid attribute of Property Class
These attributes will be Fields of Arrangement
Slide 73
Negotiation rules - Options
NR.OPTIONS
Negotiable
Non-Negotiable
Override
Fix Value
Mandatory
Slide 74
Negotiation rules - Options
Slide 75
Negotiation rules - Options
Slide 76
Negotiation rules - Type
NR.TYPE
Specifies rule for comparing the value input in an Arrangement against
value set here
Allows to define more than one negotiation rule for an attribute
Input must be a valid record defined in EB.COMPARISON.TYPE
Slide 77
Negotiation rules – Value and Message
NR.VALUE
Specifies the value that links to the rule in NR.TYPE Field
This value is used to compare against the value input in Arrangement
NR.MESSAGE
Specifies whether to raise an error or override message when the rule is
broken at Arrangement level
Slide 78
Negotiation rules - Options
DEFAULT.ATTR.OPTION
RESETTING
On Renewal activities, Arrangement conditions will be reset from Product
NON-RESETTING
On Renewal activities, arrangement conditions will be maintained from
Arrangement level
Slide 79
Negotiation rules
Slide 80
Workshop – 3 Creation of a Term Amount product condition
Use Admin Menu > Product Builder > Product Conditions >
TERM.AMOUNT
Slide 81
Solution – 3 Creation of a Term Amount product condition
Slide 82
Quiz - 3 – Choose the Correct Answer
Slide 83
Building Banking products from reusable
components
Slide 84
Product Line, Group and Product
Product
Product Property Mandatory Condition
Slide 85
AA - Tables used for building Banking Products
86
AA.PRODUCT.LINE
For Product Lines dealing with amounts, TEMENOS would have set
LINE.ATTRIBUTE Field as CCY
For other lines like Internet services, this would be left blank
Slide 87
AA.PRODUCT.LINE
Slide 88
Workshop – 4 Viewing Lending, Accounts, Deposits Product Line
Slide 89
Solution – 4 Lending, Accounts, Deposits Product Line
Slide 90
Solution – 4 Lending Product Line
Slide 91
Solution – 4 Accounts Product Line
Slide 92
Solution – 4 Deposits Product Line
Slide 93
AA.PRODUCT.GROUP
Slide 94
Workshop – 5 Creation of a new Product Group
Use Admin Menu > Product Builder > Products > Product Lines –
Lending
Create a new Product Group with the following settings for the Bank’s
own products
Slide 95
Solution – 5 Creation of a new Product Group
Slide 96
AA.PRODUCT.DESIGNER
Product definition
Saleable or inheritance only products
Child Product will inherit properties from the Parent product defined in the
field
PARENT.PRODUCT Field defines Parent to the Current product
Slide 97
AA.PRODUCT.DESIGNER
Slide 98
AA.PRODUCT.DESIGNER
Options for ARR.LINK Field are Non Tracking, Tracking or Custom Tracking
Slide 99
AA.PRODUCT.DESIGNER
Slide 100
Property Class and Arrangement link
Slide 101
AA.PRODUCT.DESIGNER
Product Currency
Currencies in which the product is available to be indicated through multi
value field
Currency related product conditions should be available for each of the
Product currency
Slide 102
Quiz 4 – Choose the correct answer
Slide 103
Workshop – 6 Creation of a Lending Product
Use Admin Menu > Product Builder > Products > Product Lines –Lending
> Product Groups
Create a Product under the Product Group created in Workshop – 5
Property Product Condition Arrangement Link
ACCOUNT PERSONAL.LOAN NON.TRACKING
ACCOUNTING LENDING TRACKING
ACTIVITY.MAPPING LENDING TRACKING
PRESENTATION LENDING TRACKING
Property created in Workshop – 2 NEGOTIABLE NON.TRACKING
for CUSTOMER Property class
PRINCIPALINT PERIODIC.RATE.MARGIN NON.TRACKING
PR.PRINCIPAL.DECREASE PRINCIPAL.DECREASE TRACKING
REPAYMENT.SCHEDULE CONSTANT.WEEKLY NON.TRACKING
COMMITMENT Product condition set in Workshop – 3 NON.TRACKING
for TERM.AMOUNT Property Class
Set the following in calculation source tab
Calculated Property Source Type Source Balance
PRINCIPALINT DR.DAILY CURACCOUNT
Slide 104
Solution – 6 Creation of a Lending Product
Slide 105
Workshop – 7 Creation of a Parent product
Use Admin Menu > Product Builder > Products > Product Lines –Lending
> Product Groups
Create another New Product under Product Group created in Workshop - 5
Set it as Parent product and mark it for INHERITANCE ONLY
Slide 106
Solution – 7 Creation of a Parent product
Slide 107
Workshop – 8 Creation of a child product - Inheritance
Use Admin Menu > Product Builder > Products > Product Lines –Lending
> Product Groups
Create a Child product under Parent product created in previous
workshop
Slide 108
Solution – 8 Creation of a child product - Inheritance
Slide 109
Designing, Proofing and Publishing
Proofing and publishing will perform processing from parent down to all
children
Slide 110
Proofing and Publishing Products
Product Management
Proof
Create Product Proofed Publish Product
Designer Products Catalog
Fix
Modify
Slide 111
Effective dates
Available Date
The date from which the current product is available
System starts looking for valid conditions for all Properties from this date
onwards
Expiry Date
The date from which this Product ceases to exist
It only means that new Arrangements may not be input from this date for the
Product
Existing Arrangements under the Product will continue
Slide 112
Workshop – 9 Proofing & Publishing a Product
Use Admin Menu > Product Builder > Products > Product Lines –
Lending > Product Groups – Product Group used in previous workshop
> Products
Proof the Parent Product used in the previous workshop with available date
as today
Slide 113
Solution – 9 Proofing & Publishing a Product
Slide 114
Quiz 5 – Choose the correct answer
Slide 115
Arrangements and Activities
Slide 116
Arrangements
Customer Product
Currency
Agreement Date Arrangement
Account
Arrangement
Condition
Slide 117
Workshop - 10 Creation of a Lending Arrangement
Use User Menu > Credit Operations > Retail Lending – Arrangements
> Product Catalog > RETAIL.TERM.LENDING > Product Groups >
Mortgages > Product Mortgage
Create an Arrangement for Mortgage Product
Look at the defaulted Term of Arrangement, change it to 2Y
Indicate a commitment amount of 50,000
Input a settlement account under settlement tab, input the payment type as
Full
Commit the Arrangement, accept overrides and get it authorised
Slide 118
Solution - 10 Creation of a Lending Arrangement
Slide 119
Workshop - 11 Creation of a Deposits Arrangement
Use User Menu > Retail Operations > Deposit Arrangements >
Product Catalog > Term Deposits > AA Deposits > Long Term Deposit
Slide 120
Solution - 11 Creation of a Deposits Arrangement
Slide 121
Workshop - 12 Creation of an Accounts Arrangement
Use User Menu > Retail Operations > Account Arrangement > Product
Catalog > Retail Accounts > Current Account Group> Current Account
Slide 122
Solution - 12 Creation of an Accounts Arrangement
Slide 123
Where are Arrangements stored ?
Arrangement data
spread across
multiple
applications
Arrangement AA.ARRANGEMENT
stored in ACTIVITY
AA.ARRANGEMENT
Arrangement
conditions relating
to various Property AA.ARR.TERM.
Classes stored in AMOUNT
applications
beginning with
AA.ARR.<Property
Class>
AA.ARR.INTEREST
Slide 124
Putting together
AA.ARRANGEMENT
ID:AA083394BJW4
AA.ARRANGEMENT AA.ARRANGEMENT.ACTIVITY
ACTIVITY ID:AAACT08339001Y91SL
AA.PRD.DES.CUSTOMER
CUSTOMER.CONDITION.20080101
ID<Product Condition id>.Product Condition Effective Date
AA.ARR.CUSTOMER
AA.PRD.DES.CUSTOMER ID:AA083394BJW4-CUSTOMER-20080107
Components of the id : AA.ARRANGEMENT ID – AA.PROPERTY id
AA.ARR.CUSTOMER Product effective date (as in AA.ARRANGEMENT)
AA.PRD.DES.ACCOUNT
ACCOUNT-20080101
AA.PRD.DES.ACCOUNT AA.ARR.ACCOUNT
AA.ARR.ACCOUNT ID:AA083394BJW4-ACCOUNT-20080107
AA.PRD.DES.TERM.AMOUNT
AA.PRD.DES.TERM.AMOUNT TERM.AMOUNT-20080101
AA.ARR.TERM.AMOUNT AA.ARR.TERM.AMOUNT
ID:AA083394BJW4-TERM.AMOUNT-20080107
Slide 125
Activities - Overview
Slide 126
Activities – Arrangement Activities
Arrangement
Slide 127
Activities - Properties
Arrangement
COMMITMENT
REPAYMENT PRININT
Slide 128
Activities - Associations
Property Activity
Slide 129
Activities - Associations
LENDING DISBURSE
LENDING-DISBURSE-
COMMITMENT
COMMITMENT
Slide 130
Activities - Activity Classes
Activities belong to
Property Property Class
a class
Activity relates to
Property; Activity Activity Activity Class
Class relates to
Property Class
LENDING-DISBURSE- LENDING-DISBURSE-
COMMITMENT TERM.AMOUNT
Slide 131
Activities creation
Slide 132
Activity Class and Action Routines
Slide 133
Activity Class and resultant Activity
LENDING Product Line - DECREASE process - for TERM.AMOUNT Property class
Slide 134
Launching Activities - Initiation
As a secondary activity
Triggered from another activity
Slide 135
Activity Log
Slide 136
Financial Activities
Teller
Disbursement
Apply payment
Other Account
related
Applications
Payments from and into an AA Account can be done through ACCOUNT related
applications viz., FT, TT, AC.CASH.POOL and DIRECT.DEBITS
Slide 137
Workshop – 13 Disbursement in a lending arrangement
Use User Menu > Credit Operations > Retail Lending – Arrangements >
Arrangement Activities (FT) > AA Disbursement
Select the lending arrangement created in earlier Workshop
Disburse USD 50,000 to Customer’s account in USD
Approve Overrides
Get the record authorised
Use User Menu > Credit Operations > Loans > Retail Lending –
Arrangements > Arrangement
Look at the Activity log
Slide 138
Solution - 13 Disbursement in a lending arrangement
Slide 139
Workshop – 14 Funding of a Deposit arrangement
Use User Menu > Credit Operations > Loans > Retail Lending –
Arrangements > Arrangement
Look at the Activity log
Slide 140
Solution - 14 Funding of a Deposit arrangement
Slide 141
Reverse and Replay – Effective Dated Processing
ARRANGEMENT
CREATION 1st Jan 500T 500T
Increase
commitment
31st Jan 50T 550T
Decrease
commitment
15th Feb 100T 450T
Today
Position - 450T
20th Feb
142
Reverse – Effective Dated Reversal for back valued increase
ARRANGEMENT
CREATION 1st Jan 500T 500T
Back valued
increase
15th Jan 150T
Increase 50T
commitment
31st Jan 500T
Reversed
Decrease 100T
commitment
15th Feb 550T
Reversed
143
Replay – Effective Dated Reversal for back valued increase
ARRANGEMENT
CREATION 1st Jan 500T 500T
Back valued
increase
15th Jan 150T 650T
Increase 50T
commitment
31st Jan 700T
Replayed
Decrease 100T
commitment
15th Feb 600T
Replayed
Today
Position - 600T
20th Feb
144
Reverse and Replay – Effective Dated Processing
145
Company Change - EB.COMPANY.CHANGE
146
ALERTS
147
Simulation
Slide 148
Simulation - Overview
Slide 149
Simulation - Overview
Slide 150
Simulation – Sub Systems
Simulation runner
For a specified period
For specified set of activities
Simulation Service
AA.SIMULATION.SERVICE has to be started to simulate the given activity
Slide 151
AA.SIMULATION.CAPTURE
Simulation Capture
Captures user activity for simulation on an existing arrangement or a new
arrangement
Conditions can be negotiated at simulation level
Subject to Negotiation rules
Can Capture forward dated simulation
Creates .SIM files
To store arrangement details captured for simulation
To store customer simulation reference for easy retrieval and reference
Possible to capture, simulate and directly execute required activity
User can opt for executing the simulation to live arrangement
Execution allowed only if status of simulation is successful
152
AA.SIMULATION.RUNNER
User can define information like Simulation Reference, Currency, Run Date and
End Date
Simulation run date is date on which simulation is run. Defaults to system
date
Simulation end date is date up to which simulation needs to be run. If left
NULL runs for run date
153
AA.SIMULATION.RUNNER – Execution and associated activity
154
AA.SIMULATION.SERVICE
155
AA.SIMULATION.MONITOR
Status of simulation:
156
Pre-requisite for Simulation workshops
Log in to Putty
Type START.TSM –DEBUG
Check tSA ‘**’ number for BNK/AA/SIMULATION.SERVICE
If the agents are already running, type –CLEAR.FILE F.TSA.STATUS
Slide 157
Workshop - 14 Simulating a lending arrangement
Use User Menu > Credit Operations > Retail Lending – Arrangements
> Product Catalog > Product Groups > Retail Term Lending > Small
Business Loans > Small Business Loan
Simulate an arrangement for your customer effective today
Loan amount is USD 5,00,000 for 3 years
Commit the record
Use User Menu > Credit Operations > Retail Lending – Arrangements
> Arrangements > New Arrangement Offers
View your simulated arrangement
Slide 158
Workshop – 53 - Solution
Slide 159
Workshop – 53 - Solution
Slide 160
Quiz 6 – Choose the Correct Answer
3. What is Simulation in AA ?
a) It is the process of capturing data for an arrangement
b) It is replicating real time scenario for arrangement
c) It is the process of disbursing an arrangement amount
Slide 161
Summary
AA product components
Property Class, Property Class Attributes and actions, Property and
Product Condition
AA product design
Product Line, Product Group and Product, Proofing and Publishing,
Inheritance in a Product Family
Slide 162
Thank You