Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
by
ADEEL PERVAIZ
Summary
QSI defines if the monitoring of UMTS cells will be performed if the signal
level is below (0-6) or above the threshold (8-14), always (7) or never
(15). This parameter is defined per GSM cell.
In the GSM network, the parameter QSI controls when the UE
performs measurements on WCDMA neighboring cells. This
parameter is set per cell. The parameter QSI can be set in the four
following alternative ways, so that WCDMA neighbors are
measured:
Always (value 7)
Never (value 15)
When signal strength of the GSM cell is above a certain value 8 to
14 (above -78dBm to -54dBm in steps of 4dBm)
When signal strength of GSM cell is below a certain value 0 to 6
(below -98dBm to -74dBm in steps of 4dBm)