Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
PROJECT PRESENTATION
ON
“IOT BASED HOME AUTOMATION
SYSTEM”
PRESENTED BY:
WAGHMODE T.C.
SURVE Y.H.
GAPAT K.S.
• Introduction
• Literature survey
• Requirements
• Block diagram
• Component list
• Circuit diagram
• Component specification
• Result
• Advantages
• Application
• Future scope
• Conclusion
• References
INTRODUCTION
Smart Home is applied in order to provide comfort,
energy efficiency and better security.
Home automation system using IoT is a way through
which one can explore and control home appliances or
devices with the help of internet connection.
IoT based home automation is a way of making home
smart.
IoT is opening lot of opportunities for a large number of
applications that promise to improve the quality of our
lives.
Defining the Internet of Things as "simply the point in
time when more 'things or objects' were connected to the
Internet than people."
Literature Survey
SR. Topic name Author name Drawbacks&
NO implementation
Hardware requirements
• Arduino UNO kit
• Relay circuit
• LCD
• Loads
• Sensors
Software requirement
• Arduino IDE
• Android apk
BLOCK DIAGRAM
WI-FI
MODULE POWER
ESP-8266 SUPPLY
LAMP-1
Smart R
LAMP-2
phone ARDUIN E
O L
A LAMP-3
BOARD
INTERNET Y
LAMP-4
WEB LM35
application LIMIT
SWITCH
WEB
SERVER BUZZER
LCD
CIRCUIT DIAGRAM
Fig:circuit daigram
FEATURES OF ARDUINO UNO
Microcontroller = ATmega328P – 8 bit AVR
family
Operating Voltage = 5V
Recommended Input Voltage = 7-12V
Input Voltage Limits = 6-20V
Analog Input Pins = 6 (A0 A5)
Digital I/O Pin = 14 (Out of which 6 provide PWM
output)
DC Current on I/O Pins = 40 mA
DC Current on 3.3V Pin = 50 mA
Flash Memory = 32 KB (0.5 KB is used for
Bootloader)
SRAM = 2 KB
EEPROM = 1 KB
Frequency (Clock Speed) = 16 MHz
ESP8266 WI-FI MODULE
It is self contained soc with integrated TCP/IP protocol
that can give any microcontroller access to your Wi-Fi
network .
A Wi-Fi micro chip has 5 mm length.
It is cheapest chip.
This device is produced by Shanghai-based Chinese
manufacturer, Espressif Systems.
ESP8266 Wi-Fi module is generally used to establish the
wireless communication between the devices.
FEATURES OF LM35
Calibrated Directly in Celsius (Centigrade)
Linear + 10-mV/°C Scale Factor
0.5°C Ensured Accuracy (at 25°C)
Rated for Full −55°C to 150°C Range
Suitable for Remote Applications
Operates from 4 V to 30 V
Less than 60-µA Current Drain
Low Self-Heating, 0.08°C in Still Air
Non-Linearity Only ±¼°C Typical
Low-Impedance Output, 0.1 Ω for 1-mA
Load
Fig : LM35
LIMIT SWITCH
limit switch works like any other momentary
switch and provide both the normally open and
normally closed contacts.
Limit switches differ in how the switch is
actuated – limit switches typically have a metal
lever on them. The metal lever acts like a spring
and protects the physical switch from repeated
impacts.
This specific version can handle up to 5A at
250VAC and has solder tab terminations.
FEATURES OF LIMIT SWITCH
Solder tabs
Rated for 5A at
250VAC
Metal spring lever
RELAY
Relay is simple sensing device used in almost all electrical devices
to scene the fault it is usually connected with circuit breaker. A
simple electromagnetic relay consists of a coil of wire wrapped
around a soft iron core, an iron yoke which provides a
low reluctance path for magnetic flux, a movable iron armature, and
one or more sets of contacts (there are two in the relay pictured). The
armature is hinged to the yoke and mechanically linked to one or
more sets of moving contacts.
It is held in place by a spring so that when the relay is de-energized
there is an air gap in the magnetic circuit. In this condition, one of
the two sets of contacts in the relay pictured is closed, and the other
set is open
WEB SERVER
Web server is a program that uses HTTP to source the file that
from web pages to user .
The process is an example of the client /server model.
The primary function of a web server is to store, process and
deliver web pages to clients.
The communication between client and server takes place using
the HTTP .
Pages delivered are most frequently HTML documents which may
include images, style sheets and scripts in addition to the text
content.
INTERNET OF THINGS
The Internet of things can be defined as connecting the
various types of objects like smart phones, personal
computer and Tablets to internet, which brings in very
newfangled type of communication between things and
people and also between things.
IoT devices are a part of the larger concept of home
automation, which can include lighting, heating and air
conditioning, media and security systems.Long term
benefits could include energy savings by automatically
ensuring lights and electronics are turned off.
RESULT
ADVANTAGES
Flexibility
Manageability
continue…..
[7] Ahmed ElShafee, Karim AlaaHamed, “Design and Implementation of a Wi-Fi Based Home
Automation System”, International Journal of Computer, Electrical, Automation, Control and
Information Engineering Vol:6, No:8, 2012
[8] D. Greaves, "Control Software for Home Automation, Design Aspects and Position Paper", The
Auto Han project at the University of Cambridge Computer Laboratory
[9] SatishPalaniappan, Naveen Hariharan, etall , “Home Automation Systems - A Study”,
International Journalof Computer Applications, Volume 116 – No. 11, April 2015
[10] Qela B, Mouftah HT. Observe, Learn, and Adapt (OLA) - An algorithm for energy management
in smart homes using wireless sensors and artificial intelligence. IEEE Transactions on Smart
Grid. 2012 Sep; 3(4):2262–72
[11] Zheng G, Zhang Z. Intelligent wireless electric power management and control system based on
ZigBee technology. IEEE International Conference on Transportation, Mechanical, and Electrical
Engineering (TMEE), 2011. p. 1120–4.
[12]www.http//:wikipedia.com
[13] Reference Book: R.S .Sedha. Applied electronics book.