Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
www.huawei.com
3GisC
U21A F1= Main indoor & outdoor frequency. 1st carrier,10837
U21B F2= 2nd carrier frequency ,10812 3GisB
U21A
G09
This plan is only suitable for whole Huawei area without border with NSN.
Carrier Plan for Existing NSN Strategy
U850 U08A U900 3GisA 3GisB 3GisC U21B U21A
4387 4363 3081 10563 10588 10613 10837 10812
U21A F1= Main indoor & outdoor frequency. 1st carrier,10812 3GisC
U21A
G09
G09 G09 G09
This plan is suitable for Huawei area with border with NSN. During swap, we need
follow this strategy.
Carrier Plan for Existing Ericsson Strategy
U850 U08A U900 3GisA 3GisB 3GisC U21B U21A
4387 4363 3081 10563 10588 10613 10812 10837
U21A F1= Main indoor & outdoor frequency. 1st carrier,10837 3GisC
U21A
G09
G09 G09 G09
This plan is only suitable for whole Huawei area without border with NSN.
Layer Scenario
Layer
Scenario Name Configurations Remark
Metro( Sydney, Melboume, Newcastle & E1, E2, F3, F4, F5, F2, The F3 & F4 will be from 3Gis, F5 will be new U2100
1 Wolongong) F1 frequency and be deplyed progressively
2 Metro( Brisbane, Adelaide & Perth) E1, E2, F3, F4, F2, F1 The F3 & F4 will be from 3Gis
3 Sunshine Coast( North Brisbane) E1, F3, F4, F2, F1 The F3 & F4 will be from 3Gis
6 Outer Metro( High capacity) E1, F1, U900 U900 is for capacity expansion
7 Rural U900, E1
Layer Scenario
Scenario1 Scenario2 Scenario3 Scenario4 Scenario5,6,7
Metro(SYD MEL) Metro(BRI ADL PER) Sunshine Coast Metro(HOB, DAR,CAN) Outer Metro & Rural
U900
U850 E2 U850 E2
U2100 F5
• System Limitation
– UE can only measure 2 inter-frequency only for both idle mode and dedicate mode in
3G
– UE can only measure 3 inter-frequency 3G frequency in GSM
– SIB11 can not be too big, which may affect UE cell selection and re-selection
• Benefit
– Voice Service can go to F1/F2/E1.Good for PS CSSR.
• Disadvantage
– SIB11 size limitation issue
Scenario 1:Metro and Outer Metro Scenario
– IDLE and Cell PCH/FACH Mode
U09A
H Preferred+R99 H Preferred+R99
U08B
U08A
R99+H R99+H R99+H
U21B
U21A
R99+H R99+H R99+H
G09
HO
GSM 900 GSM 900
Blind DRD/LDR
Measured LDR
* Default Intra-frequency reselection is enabled. When RRC
rejected by 3G, RRC redirect to 2G accroding to SIB11
neighbors.
Scenario 1:Metro and Outer Metro Scenario
- DRD/LDR Mode
U09A
H Preferred+R99 H Preferred+R99
U08B
Blind DRD only
U08A
R99+H R99+H R99+H
U21B
U21A
R99+H R99+H R99+H
G09
HO
GSM 900 GSM 900
Blind DRD
and DRD Fallback
Measured LDR
Scenario 1:Metro and Outer Metro Scenario - HO Mode
U09A
H Preferred+R99 H Preferred+R99
U08B
U08A
R99+H R99+H R99+H
U21B
U21A
R99+H R99+H R99+H
G09
SIB11
R99+H R99+H R99+H
HO
Measured LDR
None co-located ne
Scenario 2: Rural-Co located U850
– IDLE and Cell PCH/FACH Mode
R99+H
U09A
H Preferred+R99
U08B
U08A
R99+H R99+H R99+H
U21B
U21A
R99+H
G09
R99+H
SIB11
R99+H
HO
R99+H
U09A
H Preferred+R99
U08B
Blind DRD only
U08A
R99+H R99+H R99+H
U21B
U21A
R99+H
G09
SIB11
R99+H R99+H
HO
Blind DRD
GSM 900 GSM 900 GSM 900 and DRD Fallback
Measured LDR
Scenario 2: Rural-Co located U850 HO Mode
R99+H R99+H
H Preferred+R99 U09A
U08B
U08A
R99+H R99+H R99+H R99+H
U21B
U21A
H Preferred+R99
G09
Coverage Based HO
GSM 900 GSM 900 GSM 900 GSM 900
H Preferred+R99
U09A
U08B
R99+H
*Femto Cel l in
U08A
Ericsson area(10837)
*Femto Cell in NSN U21B
R99+H area(10812) U21A
G09
R99+H Femto
Femto
SIB11
GSM 900
HO
Blind DRD/LDR
Measured LDR
IDLE Mode Parameter Setting(without 3Gis)
Parameter U2100 F1 U2100 F2 U850 E1 U850 E2 U900
Cell Reselection
SsearchRat 1 1 1 1 1
IDLE Mode Parameter Setting(with 3Gis)
Parameter U2100 F1 U2100 F2 U850 E1 U850 E2 U900
Cell Reselection
SsearchRat 1 1 1 1 1
INTERFREQNCELL
U900> E1
SIB11Ind F1->E1 Ture F2F1 True F1->E1 Ture E2-E1 Ture
U900>F1 True
IdleQoffset2sn 0 F2F1 -20 0 E2E1 -20 0
LDR/DRD Parameters
Parameter U2100 F1 U2100 F2 U850 E1 U850 E2 U900
Inter-frequency Neighbors
TRUE(F1F2/E2
BlindHoFlag True -> Co-sector F1/E2 TRUE(E1E2Cosector) FALSE to other cells FALSE to other cell
Cosector)
DRDEcN0Threshhold -18dB -> Co-sector F2 18dB -> Co-sector F1 -18dB -> Co-sector E2 - -
DRD
LdbDRDSwitchHSDPA ON ON ON ON ON
LdbDRDOffsetHSDPA 10 10 10 10 10
LdbDRDLoadRemainTh
100 100 100 100 100
dHSDPA
LDR Parameters(1)
Parameter U2100 F1 U2100 F2 U850 E1 U850 E2 U900
Trigger Condition
UL_UU_LDR-1& UL_UU_LDR-1&
UL_UU_LDR-1& UL_UU_LDR-1& UL_UU_LDR-1&
DL_UU_LDR-1& DL_UU_LDR-1&
NBMLDCALGOSWI DL_UU_LDR-1& DL_UU_LDR-1& DL_UU_LDR-1&
CELL_CODE_LDR- CELL_CODE_LDR-
TCH CELL_CODE_LDR-1& CELL_CODE_LDR-1& CELL_CODE_LDR-1& 1& 1&
CELL_CREDIT_LDR-1 CELL_CREDIT_LDR-1 CELL_CREDIT_LDR-1
CELL_CREDIT_LDR CELL_CREDIT_LD
-1 R-1
IUB_LDR-0& IUB_LDR-0&
IUB_LDR-0&
IUB_LDR-0& IUB_LDR-0& NODEB_CREDIT_L NODEB_CREDIT_L
NODEBLDCALGOS NODEB_CREDIT_LDR-
NODEB_CREDIT_LDR-1& NODEB_CREDIT_LDR-1& DR-1& DR-1&
WITCH 1&
LCG_CREDIT_LDR-1 LCG_CREDIT_LDR-1 LCG_CREDIT_LDR- LCG_CREDIT_LDR-
LCG_CREDIT_LDR-1
1 1
ULLDRTRIGTHD 55 55 55 55 55
ULLDRRELTHD 45 45 45 45 45
DLLDRTRIGTHD 75 75 75 75 75
DLLDRRELTHD 65 65 65 65 65
LDR Parameters(2)
Parameter U2100 F1 U2100 F2 U850 E1 U850 E2 U900
LDR Action
DLLDRFIRSTACTIO
CodeAdj CodeAdj CodeAdj CodeAdj CodeAdj
N
DLLDRSECONDACT
InterFreqLDHO InterFreqLDHO InterFreqLDHO InterFreqLDHO InterFreqLDHO
ION
DLLDRTHIRDACTI
BERateRed BERateRed BERateRed BERateRed BERateRed
ON
ULLDRFIRSTACTI
InterFreqLDHO InterFreqLDHO InterFreqLDHO InterFreqLDHO InterFreqLDHO
ON
ULLDRSECONDA
BERateRed BERateRed BERateRed BERateRed BERateRed
CTION
E1F1/E2 TRUE
DrdOrLdrFlag FALSE FALSE FALSE E1<U900 TRUE
E1<U900 TRUE
INTERFREQLDHOMETH
BLINDHO BLINDHO MEASUREHO BLINDHO MEASUREHO
ODSELECTION
HO Parameters
Parameter U2100 F1 U2100 F2 U850 E1 U850 E2 U900
Inter-frequency Neighbors
TRUE (F2F1/E2
BlindHoFlag TRUE(F1F2/E2 Cosector) TRUE(E1E2 Cosector) FALSE to other cells FALSE to other cells
Cosector)
SHO
1A/1B/1C/1D
Mapping values
Trigger Timer
Trigger Condition
ReDirBandInd DependOnNCell
ConnectFailRrcRedirSwitch Allowed_To_Inter_RAT
When the RRC DRD fails, the RNC performs RRC redirection as follows:
The RNC selects another frequency for redirection based on the setting of the ReDirBandInd parameter.
If more than one target frequency number is available, the RNC selects a target frequency number randomly.
If no target frequency number is available, the RNC continues to perform RRC redirection according to the
setting of the ConnectFailRrcRedirSwitch parameter.
− If ConnectFailRrcRedirSwitch is set to Only_To_Inter_Frequency, the RRC connection setup fails.
− If ConnectFailRrcRedirSwitch is set to Allowed_To_Inter_RAT and there is a neighboring GSM cell, the RNC sends the
information about the neighboring GSM cell to the UE and redirects the UE to GSM system. If
ConnectFailRrcRedirSwitch is set to Allowed_To_Inter_RAT but there is no neighboring GSM cell, the UE automatically
searches for GSM cells and then selects one of them for RRC connection setup attempts.
Contents
• Current Layer Strategy with F1/F2/E1/E2
• InterFreqNcell Configuration and MML
• SPG Definition
• DC Deployment
Contents
• Current Layer Strategy with F1/F2/E1/E2
• InterFreqNcell Configuration and MML
• SPG Definition
• DC Deployment
Cell SPG Definition
SPG ID 1 1 1 1 1
PriorityServiceForR
99RT 1 1 1 1 1
PriorityServiceForR
99NRT 1 1 1 1 1
PriorityServiceFor
HSDPA 1 1 1 1 1
PriorityServiceFor
HSUPA 1 1 1 1 1
PriorityServiceForE
xtRab 1 1 1 1 1
Contents
• Current Layer Strategy with F1/F2/E1/E2
• InterFreqNcell Configuration and MML
• SPG Definition
• DC Deployment
DC deployment 850+2100(Recommended)
DC DC
R99+H R99+H R99+H
U08A
DC DC DC
U21A R99+H R99+H R99+H R99+H
Both U2100 & U850 DC is activated if there is pair frequency available, DC-HSDPA
user will setup its DC service according to HSDPA user number.
Single carrier HSDPA service is no difference, SC-HSDPA will be setup according to
HSDPA user number
DC deployment 2100 only(Not Recommend)
U08B H Preferred+R99 H Preferred+R99
R99+H R99+H
U08A
DC DC DC
U21A R99+H R99+H R99+H
DC DC
R99+H R99+H R99+H
U08A
DC-HSDPA Inter-frequency HO
DC DC DC
U21A R99+H R99+H R99+H R99+H
• System Limitation
– UE can only measure 2 inter-frequency only for both idle mode and dedicate mode in
3G
– UE can only measure 3 inter-frequency 3G frequency in GSM
– SIB11 can not be too big, which may affect UE cell selection and re-selection
• Benefit
– Voice Service can go to F1/F2/E1.Good for PS CSSR.
• Disadvantage
– SIB11 size limitation issue
Scenario 1:Metro and Outer Metro Scenario
– IDLE and Cell PCH/FACH Mode with F3/F4/F5
U21F5
H Preferred+R99 H Preferred+R99
U21F4
U21F3
R99+H R99+H R99+H U09A
U08B
H Preferred + R99 H Preferred + R99 H Preferred + R99 U08A
U21B
H Preferred + R99 H Preferred + R99 H Preferred + R99 U21A
H Preferred + R99 H Preferred + R99 H Preferred + R99 G09
SIB11
R99+H R99+H R99+H
HO
R99+H R99+H R99+H
Blind DRD/LDR
GSM 900 GSM 900
Measured LDR
* Default Intra-frequency reselection is enabled. When RRC rejected by
3G, RRC redirect to 2G accroding to SIB11 neighbors.
Scenario 1:Metro and Outer Metro Scenario
- DRD Mode with F3/F4/F5
U21F5
H Preferred+R99 H Preferred+R99
U21F4
Blind DRD only
U21F3
R99+H R99+H R99+H U09A
U08B
H Preferred + R99 H Preferred + R99 H Preferred + R99 U08A
U21B
H Preferred + R99 H Preferred + R99 H Preferred + R99
U21A
H Preferred + R99 H Preferred + R99 H Preferred + R99
G09
R99+H
SIB11
R99+H R99+H
Measured LDR
From F1/F2 to F3/F4/F5 is RAB DRD, the way back is DRD Fallback
Scenario 1:Metro and Outer Metro Scenario
- LDR Mode with F3/F4/F5
U21F5
H Preferred+R99 H Preferred+R99
U21F4
U21F3
R99+H R99+H R99+H U09A
U08B
H Preferred + R99 H Preferred + R99 H Preferred + R99 U08A
U21B
H Preferred + R99 H Preferred + R99 H Preferred + R99
U21A
H Preferred + R99 H Preferred + R99 H Preferred + R99
G09
R99+H
SIB11
R99+H R99+H
HO
R99+H R99+H R99+H
Blind LDR
Measured LDR
GSM 900 GSM 900
None co-located ne
F3/F4/F5 need to handover to F1 in case F3/F4/F5 not continues
Scenario 2: Rural-Co located U850
– IDLE and Cell PCH/FACH Mode with F3/F4/F5
U21F5
R99+H
U21F4
H Preferred+R99
U21F3
U09A
R99+H R99+H R99+H U08B
U08A
H Preferred + R99
U21B
U21A
H Preferred + R99
G09
H Preferred + R99
R99+H SIB11
R99+H R99+H
HO
U21F5
H Preferred+R99
U21F4
Blind DRD only
U21F3
R99+H R99+H R99+H U09A
U08B
H Preferred + R99 U08A
U21B
H Preferred + R99
U21A
R99+H
SIB11
HO
R99+H R99+H
Blind DRD
and DRD fallback
GSM 900 GSM 900 GSM 900
Measured LDR
Scenario 2: Rural-Co located U850 HO Mode
R99+H R99+H
H Preferred+R99
U09A
R99+H R99+H R99+H R99+H
U08B
U21B
H Preferred + R99
U21A
H Preferred + R99
G09
H Preferred+R99
Coverage Based HO
R99+H R99+H R99+H
GSM 900 GSM 900 GSM 900 GSM 900 None co-located neig
R99+H U21F4
U21F3
H Preferred + R99
*Femto Cel l in U09A
Ericsson area(10837) U08B
H Preferred + R99
*Femto Cell in NSN
U08A
area(10812)
U21B
H Preferred + R99
U21A
R99+H G09
Femto
R99+H
SIB11
HO
GSM 900
Blind DRD/LDR
Measured LDR
IDLE Mode Parameter Setting
Parameter U2100 F1 U2100 F2 U2100 F3 U2100 F4 U2100 F5 U850 E1 U850 E2 U900
Cell Reselection
IdleSintrasearc
5(10dB) 5(10dB) 5(10dB) 5(10dB) 5(10dB) 5(10dB) 5(10dB) 5(10dB)
h
IdleSintersearc
4( 8dB) 4( 8dB) 10( 20dB) 10( 20dB) 10( 20dB) 4( 8dB) 10( 20dB) 4( 8dB)
h
SIB4 and SIB4=OFF, SIB4=OFF, SIB4=OFF, SIB4=OFF, SIB4=OFF, SIB4=OFF, SIB4=OFF, SIB4=OFF,
SIB12 SIB12=OFF SIB12=OFF SIB12=OFF SIB12=OFF SIB12=OFF SIB12=OFF SIB12=OFF SIB12=OFF
Inter-frequency Neighbors
TRUE(F1 Co-
True -> Co-sector FALSE to other FALSE to other FALSE to other TRUE(E1E2C FALSE to FALSE to
BlindHoFlag sector
F1/F3/F4/F5 cells cells cells osector) other cells other cells
F2/F3/F4/F5 )
DRDEcN0Thres -18dB -> Co- 18dB -> Co-sector -18dB -> Co-
- - - - -
hhold sector F2 F1 sector E2
DRD
Service
OFF OFF OFF OFF OFF OFF OFF OFF
Steering
LdbDRDSwitc
OFF OFF OFF OFF OFF OFF OFF OFF
hDCH
LdbDRDSwitch
ON ON ON ON ON ON ON ON
HSDPA
LdbDRDchoic
UserNumber UserNumber UserNumber UserNumber UserNumber UserNumber UserNumber UserNumbe
e
LdbDRDOffset
10 10 10 10 10 10 10 10
HSDPA
LdbDRDLoadRe
mainThdHSDP 100 100 100 100 100 100 100 100
A
LDR Parameters(1)
Parameter U2100 F1 U2100 F2 U2100 F3 U2100 F4 U2100 F5 U850 E1 U850 E2 U900
Trigger Condition
DLLDRRELT
65 65 65 65 65 65 65 65
HD
LDR Parameters(2)
Parameter U2100 F1 U2100 F2 U2100 F3 U2100 F4 U2100 F5 U850 E1 U850 E2 U900
LDR Action
DLLDRFIRS
CodeAdj CodeAdj CodeAdj CodeAdj CodeAdj CodeAdj CodeAdj CodeAdj
TACTION
E1F1/E2
TRUE E1<U900
DrdOrLdrFlag FALSE FALSE FALSE FALSE FALSE FALSE
E1<U900 TRUE
TRUE
INTERFREQLD
MEASUREH
HOMETHODSE BLINDHO BLINDHO BLINDHO BLINDHO BLINDHO MEASUREHO BLINDHO
LECTION
O
HO Parameters
Parameter U2100 F1 U2100 F2 U2100 F3 U2100F4 U2100F5 U850 E1 U850 E2 U900
Inter-frequency Neighbors
TRUE(F1 Co- True -> Co-
FALSE to other FALSE to other FALSE to other TRUE(E1E2Co FALSE to FALSE to
BlindHoFlag sector sector
cells cells cells sector) other cells other cells
F2/F3/F4/F5/E2 ) F1/F3/F4/F5/E2
SHO
1A/1B/1C/1
Mapping Values
D THD
1A/1B/1C/1
D Trigger Mapping values
Timer
Trigger Condition
ReDirBandIn
d DependOnNCell
ConnectFailRrcR Allowed_To_Inter_RAT
edirSwitch
When the RRC DRD fails, the RNC performs RRC redirection as follows:
The RNC selects another frequency for redirection based on the setting of the ReDirBandInd parameter.
If more than one target frequency number is available, the RNC selects a target frequency number randomly.
If no target frequency number is available, the RNC continues to perform RRC redirection according to the
setting of the ConnectFailRrcRedirSwitch parameter.
− If ConnectFailRrcRedirSwitch is set to Only_To_Inter_Frequency, the RRC connection setup fails.
− If ConnectFailRrcRedirSwitch is set to Allowed_To_Inter_RAT and there is a neighboring GSM cell, the RNC sends the
information about the neighboring GSM cell to the UE and redirects the UE to GSM system. If
ConnectFailRrcRedirSwitch is set to Allowed_To_Inter_RAT but there is no neighboring GSM cell, the UE automatically
searches for GSM cells and then selects one of them for RRC connection setup attempts.
Contents
• Current Layer Strategy with
F1/F2/F3/F4/F5/E1/E2
• InterFreqNcell Configuration and MML
• SPG Definition
• DC Deployment
Contents
• Current Layer Strategy with
F1/F2/F3/F4/F5/E1/E2
• InterFreqNcell Configuration and MML
• SPG Definition
• DC Deployment
Cell SPG Definition
Carriers
Strategy F1 F2 F3 F4 F5 E1 E2 U900
SPG ID 1 1 1 1 1 1 1 1
PriorityServi
ceForR99RT 1 1 1 1 1 1 1 1
PriorityServi
ceForR99NR
T 1 1 1 1 1 1 1 1
PriorityServi
ceForHSDPA 1 1 1 1 1 1 1 1
PriorityServi
ceForHSUPA 1 1 1 1 1 1 1 1
PriorityServi
ceForExtRab 1 1 1 1 1 1 1 1
Contents
• Current Layer Strategy with
F1/F2/F3/F4/F5/E1/E2
• InterFreqNcell Configuration and MML
• SPG Definition
• DC Deployment
DC deployment 850+2100(Recommended)
U08 E2 H Preferred+R99 H Preferred+R99
DC
DC
R99+H R99+H R99+H
U08 E1
DC DC DC
U21 F3 H Preferred+R99 H Preferred+R99 H Preferred+R99
DC DC DC
U21 F1 R99+H R99+H R99+H
DC DC
R99+H R99+H R99+H
U08A
DC-HSDPA Inter-frequency HO
DC DC DC
U21A R99+H R99+H R99+H R99+H