Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
PLASTICS
UNDER GUIDANCE OF: DR. D.R. PESHWE
DEPARTMENT OF METALLURGICAL AND MATERIALS ENGINEERING
Visvesvaraya National Institute of Technology, Nagpur, Maharashtra
SUBMITTED BY:
SUMEET SHARMA
E-Mail:sumeetsharma005@gmail.com
WHAT ARE CFRP?
• Fibre-reinforced polymer(FRP), also Fibre-reinforced plastic, is
a composite material made of a polymer matrix reinforced
with fibres.
FIBER
GLASS WOOD
CARBON ARAMID ASBESTOS
Fibres in z-direction
BRAIDING
High quality textile
Pre-impregnated fibre fabrics
(Prepregs)
+
Curabe resin
Economical
Strength
Fbre type
Modulus
Other properties
Fig:SLI technique
Variation of fibre volume content
• An additional characteristic of the SLI method is the possibility to
directly influence the fibre content by means of the process
parameters.
• If the autoclave pressure is adjusted same as the inner resin
pressure, the fibre preform can relax in the thickness direction and
can support the impregnation due to greater permeability.
• If the fibre preform is completely impregnated, the autoclave
pressing on the fibre material can be increased by reducing the
injection pressure until the desired fibre volume content of typically
60% is reached.
Fig: Overall Carbon di oxide emmisions for life of 10 years of conventional vehicle and aircraft
Carbon Composite (CFRP) Friction Bearings
Friction bearings commonly use
lubricating oil to separate the moving
component from the mated non-
moving bearing surface. Friction bearing
surfaces commonly consist of a material
that is softer than the supported
component