Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Operator Training
Summary
1 – Control Modes
2 – Control Acknowledgement
3 – Control Condition Verifications
4 – Synchrocheck function
5 – Control in Direct Execute Mode
6 – Control in SBO Mode
7 – Device lock function
8 – Device Interlocking function
9 – Counter modification
2 Operator-Control 2
Control Modes
3 Operator-Control 3
Control Acknowledgement
4 Operator-Control 4
Control Condition Verification
5 Operator-Control 5
Control Condition Verification
6 Operator-Control 6
Synchrocheck function
7 Operator-Control 7
Controls in Direct Execute Mode
without control window
A button is configured in a mimic, and can be associated to a
control order (e.g. OFF control order. The control is
immediately sent when the operator click on the button
8 Operator-Control 8
Controls in Direct Execute Mode
without control window
Enter the value into the box then press Enter key to send the
value. The window will close automatically
9 Operator-Control 9
Controls in Direct Execute Mode
with control window
10 Operator-Control 10
Controls in Direct Execute Mode
with control window
11 Operator-Control 11
Controls in Direct Execute Mode
with control window
12 Operator-Control 12
Controls in SBO Mode
13 Operator-Control 13
Controls in SBO Mode
SBO Once
Click to open
Control Pop-up
14 Operator-Control 14
Controls in SBO Mode
SBO Once
After graphic selection phase, the control window is displayed:
15 Operator-Control 15
Controls in SBO Mode
SBO Once
16 Operator-Control 16
Controls in SBO Mode
SBO Many
17 Operator-Control 17
Controls in SBO Mode
SBO Many
18 Operator-Control 18
Device Lock function
After locking, controls from all points are refused until unlocking.
19 Operator-Control 19
Device Lock function
How to use
20 Operator-Control 20
Device Lock function
How to use
21 Operator-Control 21
Device Interlocking function
The conditions are defined via logical equations and apply for a kind
of order on a device (close/open).
22 Operator-Control 22
Device Interlocking function
23 Operator-Control 23
Device Interlocking function
24 Operator-Control 24
Counter modification
The user has to click on the value area, enter the value he wants
to send, press Enter then click on Set to send value
25 Operator-Control 25