Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
1
G3500B Start-up Tooling
• IBM compatible Personal Computer (PC) meeting
minimum ET 2001 configuration requirements
JERD2124 Single user license for the ET
JERD2129 Data subscription for all engines
171-4400 Communication Adapter Group
7X-1414 Adapter Cable
6V-2197 Magnetic Transducer
6V-3093 Transducer Adapter
7X-1695 Cable
146-4080 Multimeter group
9S-9082 Engine Turning Tool
156-1070 or
Emissions Analyzer
156-1060
2
Electronic Service Tools
Before rising alarm fill out a Caterpillar Electronic
Technician Troubleshooting Tracking Form
Technical Support:
PHONE: +1 309 675-0999
FAX: +1 309 675-0725
E-MAIL: sssc@cat.com
3
Communication Adapter II
http://eeweb01.tc.cat.com/396/396-01/product/catet/support/
4
Electrical Troubleshooting Tools
• Fabricate a jumper wire (100 to
150 mm, 4 to 6 inches long)
with Deutsch Terminals on both
ends.
• Use 7x- 1710 Multimeter Probe
to measure ADEM III circuits
voltage
• Use 8T-8726 Adapter Cable (3
Pin Breakout) for PWM sensors
5
Intermittent Electrical Problems
6
Deutsch “HD” Connector
• 1987 production, “HD” stands for
‘heavy duty’.
• Color has been black, and varied
grays
• To mate, line up ribs, push
together and turn lock ring until
it clicks
• Extraction Tool is needed for
removal of the Pins and Sockets
7
Deutsch “DT” Connector
1993 production...Some engines
have both DT and HD
New Deutsch DT connector line
(Black with Green wedges) had
solved the problem with the seals
coming loose. Pin and socket
extraction tool not used
Remove wedge and depress finger
to extract each pin or socket
8
MS Connectors
9
Wrong Cables
10
CAT ET will not communicate
with the ECM
• Comm Adapter II 171-4401:
– Tool Problems
– Computer/CAT ET Problems
– Application Problems
• For Comm Adapter I (7X-1701):
– Check for correct installation of SPM
– Check for blown fuses
11