Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Concrete-1
Sixth Term CE-313
Civil Engineering
Shorted Side
R 0.5
..
Longer Side ..
supported
Span
Span Cantilever
Slab
R < 0.5
One-Way Slabs
Plain & Reinforced Concrete-1
One-Way Slab (contd)
Main steel is only provided parallel to span
One-way slab is designed as singly reinforced
rectangular section.
hmin for the slab is different compared with the
beams.
End Conditions Steel Grades
300 420 fy
Simply Supported L/25 L/20 L f
0.4 y
20 690
One end continuous L/30 L/24 L 0.4 f y
24 690
Both ends continuous L/35 L/28 L 0.4 f y
28 690
Cantilever L/12 L/10 L 0.4 f y
10 690
Plain & Reinforced Concrete-1
One-Way Slab (contd)
L = Effective Span
Lesser of the following:
L= Ln + h/2 + h/2
= Ln + h
h = depth of slab
and
L = c/c distance between supports.
Plain & Reinforced Concrete-1
Examples of One-Way Slab (contd)
Shades in the roofing system (cantilever)
Slab of stairs
Cantilever retaining walls
Footings
Slab of stair
Footing
Plain & Reinforced Concrete-1
Bar Spacing Cover For Slabs (contd)
smax will be lesser of following
1- 5 x h (field practice is 2 x h)
If vVc Vu O.K.
Shear check in slabs is normally satisfied so no shear
reinforcement is provided
Plain & Reinforced Concrete-1
Design Procedure for One-Way Slab
1. Check whether the slab is one-way or two-way.
2. Calculate hmin and round it to higher 10mm
multiple.
i. Not less than 110 mm for rooms
ii. Not less than 75 mm for sunshades.
3. Calculate dead load acting on the slab.
Dead Load = Load per unit area x 1m width.
4. Calculate live load acting on the slab.
Live load = Load per unit area x 1m width.
Plain & Reinforced Concrete-1
Design Procedure for One-Way Slab (contd)
5. Calculate total factored load per unit strip (kN/m)
6. Calculate the moments either directly (simply
supported) or by using coefficient for continuous
slabs
7. Calculate effective depth.
d = h (20 + ()db)
db = 10, 13, 15 generally used
8. Check that
d dmin
Plain & Reinforced Concrete-1
Design Procedure for One-Way Slab (contd)
9. Calculate As required for 1m width
= 0.07 kg/mm/m2