Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
crystal
front
rear
sapphire
nova17 MK2
nova29
Applications
1 RU Panels
Access
OS Menu
MF Keys
sapphire
Fader
non-motorized /
1 Layer
motorized /
2 Layers
Volume Control
Central Module
pots
incremental
- Sums
32
80
- Sources
100
192
- Dynamics
(EQ, Lim, Comp, Delay, DeEsser)
16
32
32
256
- Minimixers
64
128
- virtualization of channels
NO
YES
MADI
DSP Ressources:
Configuration Ressources:
10
11
12
13
14
15
16
Access: Limiter
17
Access: Delay
18
Access: Dynamics - EQ
19
20
BUS-Menu
21
Description
Fader Speed
Slow, Medium or Fast to change the speed at which faders will open or close in
response to external control signals such as a fader start, or when loading
snapshots. Only the physical fader speed is affected, not the response time of any
changes to audio level.
Fader Notch
with notch enabled, you will feel a notch at 0dB when you move a fader.
Fader Hot
Mode
Disable fader motors. You may open a fader without automatically putting it on
air. Use this option if you wish to position the fader (e.g. at 0dB) and then turn on
the channel instantly (by pressing channel ON or deselecting the MUTE button).
22
Description
PFL SUM
multiple PFL may be selected. With faders closed, sources are summed onto the
PFL Bus; when a fader is opened, PFL is cancelled. Sources with open faders are
put into PFL Prepare and will be summed onto the PFL Bus once the fader is
closed.
PFL SUM R
identical to PFL Mode SUM but PFL recurs if you open the fader (cancel the PFL)
and then close the fader. PFL is only cancelled by deselecting the PFL button.
PFL
PFL buttons intercancel that only one source may be in PFL or PFL prepare.
PFL R
identical to PFL Mode PFL but PFL recurs if you open the fader (cancel the PFL)
and then close the fader. PFL is only cancelled by deselecting the PFL button.
PFL A
this mode is called PFL Always and is identical to PFL Mode SUM with the
exception that it allows open faders to be put into PFL rather than PFL Prepare.
PFL AR
this mode is a combination of PFL A and PFL R which means that PFL is never
cancelled by opening a fader.
PFL PUSH
PFL DJ
allows you to prepare a fader level which is applied when you put the fader on-air.
Press PFL and adjust the fader level. Then deselect PFL and press START to put
the fader on-air - the fader jumps to the prepared level.
Access 1 / 2 Layer 1 / 2
24
Snapshot Management
25
26
27
28
29
mono/
stereo
Lim/Comp/
EQ/Delay
DeEsser
MIC 1 DJ
mono
MIC 2
mono
HYBRID 1
mono
HYBRID 2
mono
LINE 1
TB CONF
REC
mono
AES 1
stereo
AES 2
stereo
AES 3
stereo
AES 4
stereo
TONE
Busses
mono
mono/stereo
Assignment
PGM
stereo
post/off
REC
stereo
post/off
AUX 1
stereo
post/pre/off
AUX 2
stereo
post/pre/off
30
31
32
33
mono/stereo
Dynamics
TB
MIC 1 DJ
mono
MIC 2-4
mono
MIC 5
mono
HYBRID 1, 2
mono
AES 1, 2
stereo
AES 3-8
stereo
LINE 1, 2
stereo
LINE 3-7
stereo
TONE
mono
Busses
mono/stereo
TB
PGM
stereo
post/off
REC
stereo
post/off
AUX 1
stereo
post/pre/off
AUX 2
stereo
post/pre/off
CONF
REC
X
X
X
X
Assignment
34
35
36
Lawo AG
Am Oberwald 8
76437 Rastatt / Germany
Phone +49 7222 1002-0
Fax +49 7222 1002-7101
www.lawo.com