Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
BE- CMPN1
11-230 - Chetan Mistry
11-246 Sibu Sahu
11-247 Shubhra Sewalikar
09-255 - Joydeep Singh
Introduction
Requirements
Hardware and Software:
Tools
Soldering iron
Wire cutter/stripper
Relevant parts
Pieces of cardboard (3)
10KO resistors (3)
220KO resistors (3)
Alligator clips (3)
Arduino Uno Board
Shielded cable, cut off the ends, cut into (3) 2 lengths
Aluminium foil
Masking tape
Computer with Processing and Arduino software installed.
Procedure
Step 1: Setting up the Computer System
A computer installed with Arduino IDE and Processing Software.
Output
Project Idea
Traditional Methods
While camera based gesture recognition
methods are most commonly used and they
often suffer from occlusion and lighting
condition problems.
To correctly capture hand-images on a
surface, a camera must be mounted above
the table or in front of the wall.
As a result the system configuration
becomes complex making it difficult to
implement the system as a portable
( integrated ) unit.
Complexity Analysis
Converting the Capacitance Sensing as the
input for application.
Capturing the hand movements within the
capacitance field.
Tracking the speed of the hand movements.
Creating the proper capacitance field.
Applications
Can be used to play games without using
the keyboard, mouse or joystick.
Can be used by blind people to manage
applications that will be supported by
Arduino.
Tic tac toe and Racing games can be
developed.
References
Thank You