Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
CANCELLATION OF DEALERSHIP
2008-2009 & 2009-2010
All quotes shall be submitted under guidelines of respective Regional Manager / Head Office.
Proper records should be maintained in both ends.
Concerned Regional Manager should visit / interact with the concerned project co-ordinator if
required.
Before freezing the requirement dealer should have entire project specifications duly reviewed
and accepted by Leader.
Dealers shall be fully responsible for getting Drawing and QAP approval with in 15 days from
the date of submission of the documents.
Dealers to ensure that, MDCC should be provided with in a week time positively from the date
of inspection / submission of test certificates. Where, inspections are carried out in last 3-4 days
of the month, it is the sole responsibility of the dealers to obtain the MDCC / Dispatch clearance
within that month to enable us to dispatch the material immediately. We have observed in past
that Drawing approvals and dispatch clearances are not coming in time, which cause blockage
of money, loss in the form of interest on the ready material, hampers our production planning &
reduces our buying capacity.
Distillery Project
Company : CHAMUNDI DISTILLERIES
Address : No.33/1, Sapthagiri Arcade, 2Nd Floor, 8Th Cross, H. Siddaiah
Road, Wilson Garden, Bangalore
Location : Maliyar Village, Bannur Hobli, T. Narasipura Tq. Mysore District
Project : Rectified Spirit, Extra Neutral Alcohol & Ethanol Capacity Increase
Investment in Rs Crore : 94.76
Employment : 200
************
Fertilizer Project
Company : ZUARI FERTILIZERS AND CHEMICALS LTD.,
Address : Jubliee Bldg. 45, 3Rd Floor, Museum Road, P.B. No. 25075
Bangalore
Location : Mastihole Village, Hukkeri Tq. Belgaum
Project : Urea
Investment in Rs Crore : 4565
Employment : 1560
Food Processing
Company : SAJ FOOD PRODUCTS PVT. LTD.,
Address : 5/1, Ajc, Bose Road,
Kolkata
Location : Gejjalagere Ia, Maddur Tq. Mandya Dist.
Project : Biscuita, Cookies, Cakes, Rusks And Extruded Snacks
Investment in Rs Crore : 92.42
Employment : 1025
****************
Healthcare Project
Company : HEALTHCARE GLOBAL ENTERPRISES LTD.,
Address : Hcg Towers, No.8, Kalinga Rao Road, Sampangiram Nagar,
Bangalore
Location : Devanahalli Ia, Bangalore Rural District
Project : Comprehensive Cancer Treatment Centre, Centre Of Excellence In
Investment in Rs Crore : 136.76
Employment : 1000
***********
NEW DEVELOPMENT
PRESSURE REDUCING VALVE FOR HYDRO SERVICE
APPLICATION :
These Valves are recommended for regulation Hydro Pressure in piping system .
Maximum Inlet Pressure : 57 Bar
Reduction
: 2 Bar to 10 Bar
Size
: 1.1/2 (40mm) to 4 (100mm)
End Connection
: Flange end Table F/H/J.
MOC
: WCB Gr. 216/ any other ferrous grade.
Temperature
: Upto 60 Deg Centigrade
Working :
Self Activated pressure reducing valve is of simple design incorporating unit pilot valve. The main valve is
opened by high pressure acting on the large piston directly above it. The pilot valve, working in conjunction
with the piston actuated by any unbalanced effect of the adjusting spring and low pressure beneath it, controls
necessary pressure to the piston. Thus the pilot valve extremely sensitive to the secondary pressure, opens
and closes the main valve in a proportionate degree to maintain the desired constant low pressure.
Instructions for Fixing:
The Valves should be installed in a Horizontal Pipe Line.
Stop Valves, preferable, parallel slide type, should be installed both at inlet and outlet of the reducing valve.
A strainer must be installed on high pressure side just before the reducing valve.
A Relief valve able to discharge full capacity of the reducing valve and a pressure gauge should be installed on
the low pressure side.
f) Blow out all scale and jointing material from the pipeline before fixing the
reducing valve.
i)The installation should be done as per sketch shown.
Usage: Most suitable at hydro-power projects & allied industries.