Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
BY
SRSREDDY, IAU
Definitions
Welding procedure specification [WPS]:
is a written document that provides direction to the
welder or welding operator for making production
welds in accordance with code requirements. The
completed WPS shall describe all the essential ,
non essential and when required supplementary
essential variables for each welding process used
in the WPS.
Definitions
Procedure Qualification record [PQR]:
is a record of the weld data used to weld a test
coupon. It also contains the test results of the
tested specimens. The completed PQR shall
document all the essential when required
supplementary essential variables for each welding
process used during the welding of test coupon.
Non essential variables used during the welding of
the coupon may be recorded.
Definitions
Welder performance qualification [WPQ]:
is a record of the weld data used to weld a test coupon. It also
contains the test results of the tested specimens. The
completed WPQ shall document only the essential variables
for each welding process used during the welding of test
coupon.
A welder or welding operator may be qualified by radiography of a
test coupon, radiography of his initial production welding or by
bend tests taken from a test coupon
Definitions
Essential variable: are those in which a change, as
described in the specific variables, is considered to
affect the mechanical properties of the weldment,
and shall require requalification of the WPS.
Non essential variables: are those in which a change
as described in the specific variables may be
made in the WPS with out requalification..
Supplementary essential variables: are required for
materials for which other sections specify notch
toughness tests and are in addition to the essential
variables for each welding process
Definitions
Manual welding: Welding where in entire
welding operation is performed and
controlled by Hand [Example : SMAW]
Semi automatic welding: Welding with
equipment which controls only the filler
metal feed. The advance of welding is
manually controlled. [Example: MIG, MAG,
FCAW]
Definitions
Automatic welding: Welding with equipment which
performs the welding operation with out adjustment
of controls by a welding operator. The equipment
may or may not perform the loading and unloading
of the work
Machine welding: Welding with equipment that has
controls that are manually adjusted by the welding
operator in response to visual observation of the
welding with the torch, gun or electrode holder by a
mechanical device. [Example SAW]
Definitions
Welder: One who performs Manual or Semi
automatic welding
Welding operator: One who operates Machine
or Automatic welding equipment
Definitions
P number: P numbers are assigned to base
metals dependent on characteristics such
as composition, weldability, and mechanical
properties where this logically can be done.
Group number are assigned additionally to P
Numbers to classify the metals for the
purpose of procedure qualification where
notch toughness requirements are
specified.
Definitions
S number: S numbers are assigned to materials that are
acceptable for use by the ASME B31 code for pressure piping
or by selected boiler and pressure vessel code case , but
which are not included within ASME Boiler and pressure
vessel code material specifications [Section II].
Qualification using a P number material qualifies corresponding S
number materials; Qualification using an S number material
qualifies corresponding S number materials but not
corresponding P- Number materials ; qualification of welders
using a P number material qualifies them to weld on
corresponding S- number materials and Vice versa.
Definitions
F number: grouping of electrodes and welding
rods is based on essentially on their
usability characteristics. This grouping is
made to reduce the number of welding
procedure and performance qualifications
where this can logically be done.
A number: is given based on weld metal
analysis for procedure qualification.
Definitions
Position of welding: Flat, Horizotal, Overhead,
Vertical
Test positions see the figs
Qualification Requirements
END PRODUCT /
CODE / STANDARD
ASME
Section I Power Boilers
Section III Nuclear Components
Section VIII Pressure Vessels
ASME
B3 1.1 Power Piping
B31.3 Refinery/Chemical Piping
B31.4 Liquid Petroleum Transportation
Piping
B31.8 Gas Transmission Distribution
Piping
DIA
AWS
D 1.1 Structural CodeSteel
D1.3 Sheet Steel in Structures
Structural Code Reinforcing Steel
D3.5 Steel Hull Welding
D14.1 Industrial and Mill Cranes
D14.3 Heavy Equipment
D14.4 Machinery Equipment
SPECIFIED QUALIFICATION
REQUIREMENTS
ASME Sec. IX
ASME Sec. IX
ASME Sec. IX
ASME Sec. IX
ASME Sec. IX
API1104 or ASME Section IX
API 1104 or ASME IX or Appendix A of B31.8API
Contained in D 1. 1
Contained in D1.3
Contained in DIA
U.S. Navy/U.S. Coast Guard/Bureau of Ships
Specifications
Contained in D14.1 or may use ASME Section IX
Contained in D 14.3 except use AWS D 10. 9 for
Pipe/Tube
Contained in D14.4
Review of WPQ
Thank
you