Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
(VoLTE Markets)
HQ RAN Best Practices and Standards
Problem Statement
VoLTE QCI-1 bearer setups were rejected due to CAC of UL PRB load, mainly
in 5 MHz bandwidth. The number of RRC connected / default bearers have
not reached the maximum capacity, nor the VoLTE number of users.
No of RRC
Connected
users below
capacity limit
PRB
Utilization
beyond the
90% CAC
thresholds.
ERAB Set Up
Fail due to
CAC
Monitoring
Monitoring in place with ALU to identify chronic sites with the blocking on
the QCI-1 traffic.
Send names of engineers who need to get on this monitoring list by COB
12/16.
Step Process
Site Identified as blocking
VoLTE due to PRB CAC
Is the
blocking due
to no. of
users ?
Blocking still
due to no. of
users ?
VoLTE markets can use step 2(a) and 2(b) for relief on sectors blocking due to no
etween carriers.
VoLTE
Markets Only
Reduce the minimum bit rate for BE for UL and DL to reduce the PRB calculation.
Adjust the CAC thresholds for the four level PRB CAC to dimension for VoLTE + Video calls.
Cap the UL PRB consumption per kbps to 10 (spare parameter) based on the UE condition.
Reduced PRB utilization, which can reduce the PRB based offloading or load equalization.
Possibility of admitting more users (ones CACing before), delay offloading.
Class B..
requires
reset.
Preventitive
Offloading
Market Expectation
The markets will have to identify the sites (from monitoring list) and fix on the need basis .
The short term relief should only be used in the markets with commercial VoLTE traffic.
Identify sites that will need the short term fix for the new year or holiday traffic.
Utilize the steps 2(a) and 2(b) for further load balancing.
Follow the change management process (reduce POE risk) and open the CR as required.
VS_PRB_PoolLoad_ModemRep_UL_rate_max(L13214_0_Max_31_CI)(%)
VS_PRB_PoolLoad_ModemRep_DL_rate_max(L13213_0_Max_31_CI)(%)
VS_ERABs_proc_setup_fail_CAC(L12603_0)(No unit)
VS_ERAB_QCI1_IaLTE_setup_fail(L126e5_20_CI)(No unit)
VS_ERABs_proc_setup_fail_CAC(L12603_0)(No unit)
VS_UE_RRC_connected_state_max(L13201_Max_CI)(No unit)
Trial WO
DL PRB
Utilization
beyond the
90% CAC
thresholds.
QCI-1 Set Up
Failure
Some failures
still visible as
site is
reaching max
user limit