Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
1. Software Installation
2. Main Interface
3. Operation
4. New Functions
5. Points to Note
Software Installation
Pilot Pioneer is based on .net Framework 4.0. If it is not installed, please go to
Microsoft Download Center to download and install it properly before Pilot
Pioneer installation.
1. Software Installation
2. Main Interface
3. Operation
4. New Functions
5. Points to Note
Main Interface
Menu Bar
Tool Bar
Project
Device
Workspace
GIS InfoGIS
Navigation
Pane
Workspace
1. Software Installation
2. Main Interface
3. Operation
4. New Functions
5. Points to Note
Operation Procedure
Import Map
Create/Open a
project
Perform statistics
and analysis
Configure system
Connect devices
Configure test
plans
Create/Open a Project
Import Project: Users may import the saved configuration, such as device, and test plan by importing a project.
Create a
project
Open a
project
Import Site
Import Site: When checking the test route on the Map window, users may import sites to check the site linking.
Import site database
Event setting
Parameter
Setting
Select a network.
Select a parameter to
modify its threshold.
Users may
perform data
division
configuration
by time or
size in the
General and
Advance tab
pages.
Record setting
Connect Devices
Double-click a device for
manual device configuration.
Connect Devices
Click the automatic detect for
automatic device configuration.
Message details
During test, users may click this button to freeze the message or event
screen to check data details as required.
Take KPI statistics as an example, after selecting a data file, users may set parameters, event, chart, coverage map,
etc, and generate statistics report based on the settings.
1. Software Installation
2. Main Interface
3. Operation
4. New Functions
5. Points to Note
based on the VoLTE coding rate. In addition, SIP messages can be decoded and event can be defined
in this version.
For upload service test (such as FTP UL and Multi FTP UL), the software may automatically create
files to be uploaded with specified size, which improves test configuration efficiency.
test route bird's eye view. This function is only valid during data replay.
1.
2.
The site database in the following formats can be imported into Pilot Pioneer:
Asset (WCDMA)
Atoll (GSM, CDMA and WCDMA)
Planet (GSM)
The current serving cell name can be exported (the site database must have been
imported).
New Devices
Pilot Pioneer supports the following new devices:
Huawei D2-5000
Supported network technologies and frequency
TDD-LTE: 1900/2300/2600 MHz
TDSCDMA: 2010-2025 MHz/1880-1920 MHz
GSM: 850/900/1800/1900 MHz
Data rate:
LTE: 100 Mbps (DL); 50 Mbps (UL)
Huawei D2-6070
Supported network technologies and frequency and bands
TDD-LTE: 1900/2300/2600 MHz
TDSCDMA: 2010-2025 MHz/1880-1920 MHz
GSM: 850/900/1800/1900 MHz
Data rate:
LTE: 100 Mbps (DL); 50 Mbps (UL)
LC5171MiFi
Supported network technologies and frequency and bands
TDD-LTE: 1900/2300/2600 MHz
TDSCDMA: 2010-2025 MHz/1880-1920 MHz
GSM: 850/900/1800/1900 MHz
Data rate:
LTE: 150 Mbps (DL); 50 Mbps (UL)
New Devices
LC8161PAD
Supported network technologies and frequency and bands
TDD-LTE: 1900/2300/2600 MHz
TDSCDMA: 2010-2025 MHz/1880-1920 MHz
GSM: 850/900/1800/1900 MHz
Data rate:
LTE: 150 Mbps (DL); 50 Mbps (UL)
SAMSUNG S4 i9508c
Supported network technologies and frequency and bands
TDD-LTE: 1900/2300/2600 MHz
TDSCDMA: 2010-2025 MHz/1880-1920 MHz
UMTS: 900/2100 MHz
GSM: 850/900/1800/1900 MHz
CSFB (Circuit Switched Fallback)
Data rate:
LTE: 100 Mbps (DL); 50 Mbps (UL)
Qualcomm msm 8974
Supported network technologies and frequency and bands
TDD-LTE: 1900/2300/2600 MHz
TDSCDMA: 2010-2025 MHz/1880-1920 MHz
GSM: 850/900/1800/1900 MHz
VoLTE
Data rate:
LTE: 100 Mbps (DL); 50 Mbps (UL)
iPhone 5s
Supported network technologies and
frequency and bands
Model: A1530* (recommended)
FDD-LTE (Bands 1, 2, 3, 5, 7, 8, 20)
TDD-LTE (Bands 38, 39, 40)
UMTS/HSPA+/DC-HSDPA (850, 900, 1900,
2100 MHz)
GSM/EDGE (850, 900, 1800, 1900 MHz)
1. Software Installation
2. Main Interface
3. Operation
4. New Functions
5. Points to Note
After installing the driver, users may open the device manager to check the port. If there is only one or
two ports, then the device is a commercial device.
If all the related ports are well detected, then open the agent and click the second tab page. If
Connected is displayed under Status, the device is authenticated and can be used for test.
Device Model
Client Version
Hisilicon E398
1.0.26.0
Hisilicon CPE
2.4.0
3.0.1
2.2.0.0
Hisilicon E3276S-861/150
2.2.0.0
For Windows XP: Connect D1 to the PC. Run HyperTerminal, enter the AT command, and the
system returns response with OK. Enter AT*QMODE=3,1, and then the system returns response
with OK.
For Windows 7: Download HyperTerminal, and refer to the steps described in the Windows XP
environment after installation.
Users need to uninstall the previous version of Pilot Pioneer before installing a later version. If GIS is
still abnormal, the possible reason is that the GIS control is not registered successfully. Users may
double click RegComList.exe in the installation path of the pilot pioneer for manual registration.
2.
By default, Pilot Pioneer may save RCU data files in the .ddib format, which can be used for
statistics and analysis. Users may choose Record > Record Configuration, and click Advance to
set whether to save RCU data files.
Pilot Pioneer needs to send commands to the device to enable the USB Network Sharing mode for automatic
device detection. A network adapter will be mapped in the PC system for the device, and the PC system will
perform automatic detection, that is, to load the device. If users connect the device before the device is
completely loaded, no information may be displayed on the interface.
Keep the USB Tethering option disabled before connecting Samsung S3 to Pilot Pioneer and do not
modify it during service test.
1.
Check if any Android management tool (such as Snap Pea) on the phone is running? Make sure to
turn it off before test.
2.
Check if ROOT software/tool is installed on the Android phone, as the ROOT tool will generate
some dynamic databases that may conflict with those of Pilot Pioneer (such as AdbWinUsbApi.dll,
AdbWinApi.dll, and adb.exe).
If the problem is caused by the installation of ROOT tool, there are two methods to solve the problem.
a.
b.
Copy the three dynamic databases mentioned above to the ADB file in the Pilot Pioneer
installation path (\Program Files\DingLi\Pilot Pioneer9.1.*.****\ADB\) to replace the existed ones.
Thank You!