Sei sulla pagina 1di 39

Kinetic Analysis of Tyrosinase Enzyme

Experiment #5

Enzymes as catalysts
It is necessary for biological reactions to occur much quicker than the ambient temperature and prevailing conditions would allow
catalyst a substance that when added to a chemical reaction, speeds it up without altering the final products or without itself being consumed. Enzymes are biological catalysts

Enzyme Benefits
Enzymes provide many medical benefits
key to understanding inborn errors of metabolism important in detoxification reactions targets of chemotherapy aid in diagnosis and monitoring therapy primary role of vitamins is as enzyme cofactors key to metabolic control and balance

Enzyme properties
All enzymes are proteins
Molecular Weight range: 15 kd-1000 kd enzymes show the same physical and chemical properties as all proteins
denaturation precipitation sensitivity to proteases

Enzymes are efficient biological catalysts which must operate at 37o C or below and at pH values found in living cells

Enzyme Properties
Enzymes are highly specific in their catalysis
they must bind (form a complex) with substrate into a region of the enzyme known as the active site

How?

Enzyme Properties
Enzymes also allow the regulation of reactions through activation or inhibition of the enzyme by effectors
** Virtually all biological reactions are found to be enzyme catalyzed**

Studies of enzyme kinetics began in 1902 by Adrian Brown studied the rate of hydrolysis of sucrose proposed that the overall reaction was composed of two elementary reactions

Enzyme Kinetics

The enzyme-substrate complex (ES) provides the transitional state that facilitates a more rapid production of products

Enzyme Kinetics
In 1913, Lenor Michaelis and Maude Menten made the assumption that the reversible step in the mechanism does achieve equilibrium
Therefore, rewriting the law of chemical equilibrium for the reversible step and equating the ratio of the forward to reverse rate constants and making substitutions.

Enzyme Kinetics
Michealis-Menten equation
vo = Vmax [S] Km + [S]
Vmax= the rate of reaction in which all of the active sites of the enzyme are consumed by substrate Km= a ratio of all rate constants involved. Km also represents the substrate concentration at which the reaction rate is 1/2 of Vmax [S] = the concentration of substrate binding to enzyme

Effects of Temperature on Enzymes


Living systems must function in a relatively restricted range of temperature Enzyme catalyzed reaction rates will increase with temperature
will approximately double for every 10o increase

However, enzymes are proteins...

Tyrosinase Enzyme
Copper containing oxidase Widely distributed in plants, animals, and humans
In plant cells, is responsible for browning in potatoes, apples and bananas In human cells, is responsible for catalyzing the biosynthesis of melanin pigments, causing suntans

Method of assay:
Tyrosinase + (d,l)-Dopa Dopachrome = 475 nm

Kinetic Assay Procedure


Overview:
DETERMINE TOTAL CONCENTRATION OF ENZYME DETERMINE IDEAL LEVEL OF TYROSINASE FOR KINETIC ASSAYS PERFORM KINETIC ASSAYS TO DETERMINE Km INHIBITION OF ENZYME ACTIVITY

Kinetic Assay Procedure


Week #1:
Estimate enzyme concentration Determine ideal volume of enzyme to use Determine appropriate substrate volume range

Determine Tyrosinase Concentration


adjust UV-VIS to 280 nm zero out instrument using 0.05M pH 7.0 phosphate buffer measure absorbance of tyrosinase solution Calculate concentration assuming a 1% w/v standard has an absorbance of 24.9

Kinetic Assay Procedure


** All reagents except enzyme will be stored at room temperature**

Determination of Ideal Enzyme Volume:


Initially set up all 5 assays as given in the table EXCEPT for adding enzyme (gently invert to mix)

Reagent (mL)
phosphate buffer l,d-Dopa Tyrosinase

1
1.45 1.5 0.05

2
1.40 1.5 0.10

3
1.30 1.5 0.20

4
1.20 1.5 0.30

5
1.10 1.5 0.40

Place into spectrophotometer at 475 nm and immediately set 0 and 100%T

Kinetic Assay (continued)


Record absorbance every 30 sec for 3 minutes (Blank Rate) Add the assay volume of tyrosinase (invert to mix) Record absorbances every 30 seconds for 4-5 minutes Choose the enzyme volume that provided a convenient rate at saturating levels of substrate (A/min = 0.10-.15)

Determination of Substrate Volume:


Designed as a trial run to make sure the recommended volumes of substrate concentration will work (sufficient changes in absorbance that arent too rapid or too slow) If they dont work, formulate a volume range that will

**Set up assays containing fixed volume of enzyme. Total volume always 3.0 mL**

Reagent phosphate buffer d,l-Dopa tyrosinase

1 2 3 4 5 (3.00 - (substrate + enzyme) 0.10 0.40 0.80 1.0 1.50 *optimal enzyme volume

*Run assays just like previous step..running a blank, adding enzyme last, recording measurements every 30 sec

Kinetic Analysis of Tyrosinase Enzyme


Experiment #5 Week#2: Determination of Km Inhibition

Enzyme Inhibition
Inhibitors can halt the activity of an enzyme
results in a decreasing concentration of product formation Drug therapy is based on the inhibition of specific enzymes

There are three major classes of inhibitors


Competitive Noncompetitive Uncompetitive

Competitive Inhibition
A molecule that fits into the enzymes active site but does not react with it Enzyme will remain inactive until the inhibitor falls off More substrate is needed to get to the maximum rate, since substrate competes with inhibitor

Noncompetitive Inhibition
Inhibitor fits into a site on the enzyme different from the active site As a result, the folding of the enzyme changes a bit, distorting the active site in a way that makes it less effective as a catalyst A decrease in the maximum rate would be observed since each catalyst has become less efficient

Uncompetitive Inhibition

Inhibitor binds to the enzyme only after enzymesubstrate complex forms As a result, catalytic activity is blocked

Irreversible Inhibition
Inhibitor may bind to the active site or alternative site
Next, inhibitor forms a covalent bond to the enzyme Since inhibitor, will not fall off, the enzyme molecule is dead

Different slopes, same y-intercept (Km for substrate increases)

Different slopes, different y-intercept, same x-intercept (Vmax


decreases)

Same slope, different x-intercept and y-intercept (Equal change in both


Km and Vmax)

Inhibitors to tyrosinase
Several compounds act as inhibitors to tyrosinase enzyme.. We will examine:
Thiourea Cinnamic Acid
Cinnamic acid was found to be effective in apple juice, especially when used in combination with ascorbic acid (Walker, 1976: Sapers et al., 1989b). This inhibitor was also effective when applied to cut surfaces of apples, but induced browning under some circumstances. Carbon monoxide has been proposed as a browning inhibitor for mushrooms (Albisu et al., 1989).

Procedure
I. Determination of Km Set up the following assays using ideal volume of enzyme and ideal substrate range. Total volume is 3.0 mL Reagent phosphate buffer d,l-Dopa tyrosinase 1 2 3 4 5 (3.00 - (substrate + enzyme) 0.10 0.40 0.80 1.0 1.50 ** *optimal enzyme volume

** substitute substrate volume range that worked best** Ideal product formation is A/min = 0.033-0.25

Procedure
Set up all 5 assays as given in the table except for

adding the enzyme Place into spectrophotometer at 475 nm and immediately set 0 and 100%T Record absorbance every 30 seconds for 3 minutes (blank rate) Add the assay volume of tyrosinase, invert, immediately set 100%T Record absorbances every 30 seconds for 4 minutes

Procedure
II. Inhibition
Choose one of the three inhibitors Choose a constant level of inhibitor that results in at least 20-30% decrease in rate (for an intermediate concentration of substrate)
Reagent phosphate buffer d,l-Dopa inhibitor tyrosinase 1 2 3 4 5 (3.00mL - (substrate + inhibitor + enzyme)) 0.10 0.40 0.80 1.0 1.50 ** determined by trial and error *optimal enzyme volume

Run assays just like in Km determination (set up blank rate with buffer, substrate, and inhibitor)

Data Analysis
Assay #1 Elapsed Time Blank 0 min .. 3 min with enzyme 0 min . 4 min %T Absorbance

Data Analysis
Data Summary uninhibited Assay# 1 2 3 4 5 [S]
**delta

A /min vo

1/[S]

1/ vo

Prepare a similar table for inhibited runs **A/min should be blank corrected: (A/min)enzyme - (A/min)blank

Data Analysis
Use the following formulas to calculate [S] and vo
[S]mg/mL = (volume used in assay)(Stock conc. mg/mL) 3.0 mL [S] mol/L = Smg/mL x 1 197.2
The rate of reaction is dependent on production of Dopachrome molar absorptivity constant of dopachrome = 3600 mol/Lcm c = A/min 3600 x 1cm (mol/Lmin ) (c )(.003L)(106 ) = vo (umol/min)

Data Analysis
Use linear regression to calculate slope and intercept for inhibited and uninhibited plot
Uninhibited y-intercept= 1/Vmax 1/y-intercept = Vmax Inhibited compare slope and y-int to inhibited
competitive & noncompetitive

slope = Km/Vmax Km = (slope)(Vmax)

slopeinh = slopeuninh (1 + [I]/KI) [I] = (ml inhibitor used)(inhibitor, M) (3.0 mL)


uncompetitive y-interceptinh = y-interceptuninh (1

+ [I]/KI)

Potrebbero piacerti anche