Sei sulla pagina 1di 56

Specifications of Textile Testing Equipments

Tension Meter: To Check the online tension during passage of yarn. 0.1gm Accuracy, Maximum 300gm.

1/19/2014 5:40:15 AM

COMB SORTER
SPECIFICATIONS Acrylic Transparent sheet : Fiber Mounting Templates : Net Weight of the Unit : Overall Dimensions of the Unit : 6 X 8 X 2 peaces, 3 X 8 X 2 Pcs. 6 X 8 X 2 peaces, 3 X 8 X 2 Pcs. 3.680 Kg. 125(W) X 220(L) X 110(H)

1/19/2014 5:40:15 AM

Handy Ends counting Glass (8x). To determine ends and picks in 1 cm.

1/19/2014 5:40:15 AM

Handy Microscope (40x with scale): Closer view of yarn or fabric.

1/19/2014 5:40:15 AM

Digital Microscope 5x,10x,20x,40x & 100x lenses monocular projection microscope with fibre cross section kit, high resolution CCD camera and imaging software with measurement facilities. Scope of use cross section of fibre or yarn, analysis of any fibre, yarn and fabric.

1/19/2014 5:40:15 AM

Twist Tester (Manual)


To check the Twist Per Meter of the yarn. Test length : 50 to 250 mm Counter : Five digit revolution counters. Overall Dimension of the units : 630mm (L), 120mm (W), 350mm (H). Weight of Machine : 6.560 Kg. BS 946:1952
1/19/2014 5:40:15 AM 7

Twist Tester (Semi Automatic)

To check the twist of yarn. Test length 50 mm, 100 mm, 150 mm, 200 mm.

1/19/2014 5:40:15 AM

Twist Tester (Auto)


To check the Twist Per Meter of the yarn. Test length : 250 mm Counter : Four digit revolution counters. Overall Dimension of the units : 620mm (L), 80mm (W), 184mm (H). Weight of Machine : 6.000 Kg. BS 946:1952
1/19/2014 5:40:15 AM 9

Twist Tester (Micro)


To check the Twist Per Meter of the yarn. Test length : 250 mm Counter : Four digit revolution counters. Overall Dimension of the units : 970mm (L), 125mm (W), 185mm (H) Weight of Machine : 7.700 Kg. BS 946:1952
1/19/2014 5:40:15 AM 10

Wrap Reel (Manual) To Prepare Lea of Yarn to check Denier, etc. Swift Perimeter : 1 Meter Number of leas made at a time : 5 Spread of each lea : 20 mm Counter (Five Digits) : Manual Overall Dimensions of the Unit : 600mm (L),450mm(W),420mm(H) Net Weight of the Unit : 18.00 Kg. Overall Dime. Cone Unit : 452mm (L),349mm(W),669mm (H) Net Weight of the Cone Unit : 4.600 Kg. Free Pocket weighing scale with Wrap reel.
1/19/2014 5:40:15 AM 11

20. Wrap Reel (Semi Automatic)


As per standards :BS 2471:1978 (1991) Specification:

Swift Perimeter : 1 Meter (optional) or 1.5 yards Number of leas made at a time : 3 Spread of each lea : 20 mm Overall Dimensions of the main Unit : 450mm (L), 260mm (W), 360mm (H). Net Weight of the main Unit : 3.000 Kg. Overall Dimensions of the cone Unit : 280mm x 260mm x 500mm Net Weight of the cone Unit : 1.800 Kgs (approx). Controls : MAIN, ZERO/RESET.

1/19/2014 5:40:15 AM

12

Beeseley Balance To check Count or Denier of the short samples.

Sizing Template : Sizing Template Counts System : Overall Dimension of the Unit :

01 No. 05 System 545 (L) X 128 (W) X 198(H)

1/19/2014 5:40:15 AM

13

Yarn Evenness Tester To check the evenness and appearance of the yarn. Over all Dimension of the Unit :61 (W) cm x 35 (D) cm x 27.5 (H) cm. Size of Tapered Board :28.5cmx18cm, Taper Angle 2 Size of Rectangular Board :28.5cm x 18 cm Standard Yarn Spacing :20, 22, 26, 32, 38, 48 WRAPS per INCH Net Weight of the Unit :21 kg.

1/19/2014 5:40:15 AM

14

Crimp Rigidity Tester Swift Perimeter : 1 Meter Number of leas made at a time : 1 Counter (Five Digits) : Manual Overall Dimensions of the Unit : 600mm (L),450mm (W),420mm (H) Net Weight of the Unit : 17.960 Kg. Overall Dimensions of the Cone Unit: 450mm (L),350mm (W),600mm (H). Net Weight of the Cone Unit : 7.5 Kg. (16.5 lbs)

1/19/2014 5:40:15 AM

15

Mechanical Fibrometer unit to perform tensile test on Threads

Detailed Product Description It can be applied in various testing purposes: load / elongation test / fracture test. T-screw transfer, manual operation, simple, stability, vertical and horizontal. Dimension: L*W*H(mm)160*240*460;Capacity: 500N Stroke: 150mm Adapt with: SN, SH series force gauge, clamps and digital scale.

1/19/2014 5:40:15 AM

16

Universal Tensile Testing Machine To check the tensile properties of single yarn, lea as well as fabric. Over all Dimensions of the Unit : 43cm(L)x30(W)cmx135cm(H) Force rating : 200kg. Force resolution : 20gm Maximum crosshead stroke : 750mm Approx. Crosshead displacement measurement Resolution : 0.1mm. Crosshead speed : 20 to 400 mm/min or fixed as per users requirement. Power Supply : 230 V AC, 50Hz,Single Phase.

1/19/2014 5:40:15 AM

17

Single Yarn Crimp Tester Over all Dimension of the Unit Weight of unit :76(L)cmx30(W)cmx8cm(H) :800gms.

1/19/2014 5:40:15 AM

18

Package / Shore Hardness Tester Range Instruments weight : : 0-1000 gm.. 200 gm.

1/19/2014 5:40:15 AM

19

Package / Shore Hardness Tester


SPECIFICATIONS : Product info: digital durometer for shore hardness testing pocket size model with integrated probe Parameters displayed: hardness result, average value, max. value Measurement range:0-100HA(HD), Measurement deviation:1%H Resolution: 0.1, Auto switch off, With RS232C interface Operating conditions: 0 to 40, Power supply: 4x1.5V AAA (UM-4) battery Battery indicator: low battery indicator Dimensions: 162x65x38mm, Weight (not including probe):173g Standards: DIN53505, ASTMD2240, ISO7619, JISK7215
1/19/2014 5:40:15 AM 20

18. HTHP Beaker Dyeing Machine (S.S.)


Capacity Capacity of Beaker Carriage Rotation : As per requirements : 250 ml x 12 Beakers : At 22 rpm. ( 2 rpm.)

Maximum operating Temperature : 140C. Maximum rate of heating 3.50C/Min.Controlled through temperature controllerhaving auto/manual operation. Heater rating : 2 KW Medium used for Heating : Glycerine Electrical Supply : 3 KW at 230 Volts AC, 1 Phase Geared Motor : Reversible synchronised geared motor. Overall dimensions of the Unit : 700 mm (W) x 470 mm (H) x 370 mm (D) (Regular size) Net Weight of the Unit : 50 Kgs. (Approx regular size) Application : Multiutility facility for any kind of yarn and fabric dyeing.

1/19/2014 5:40:15 AM

21

Open Bath / Water Bath

Capacity : Max. 12 Beakers Capacity of Beaker : 250 ml. Temperature : Maximum operating Temperature 100 Maximum rate of heating : 3.5C/Min. Heater rating : 1 KW Medium used for Heating : Water Electrical Supply : 1 Phase Overall dimensions of the Unit : 24(W) x 16(D) x 12mm(H) Net Weight of the Unit : 48 Kgs. with 12 Beakers
1/19/2014 5:40:15 AM 22

Digital Washing Machine


SPECIFICATIONS: Inner dimensions of the Main Bath: 450 X 410 X 295 mm Capacity (in litres) of Main Bath : 29 Litres (Approx.) Number of Beakers (Test Vessels) : 08 Nos.Leak-proof Beakers with Gaskets Standard Seal for Beakers : 08 Nos. Special Neoprene Gaskets Volume of each Beakers : 55050 ml. Distance from Shaft : 4510 mm Speed of Rotation : 402 rpm Temperature Controller : DIGITAL Temperature Regulation : PT-100 with 2.0C (As Per I.S.O.) Timer (Digital) : 0-99 Minutes Motor : Single Phase, Geared Motor0 ~ 230 Volts AC, 50 Hz. Overall Dimensions of the unit (without S. S. Stand): 710 x 570 x 785 mm Overall Dimensions of the unit (With S. S. Stand) : 720 x 590 x 1140 mm Net Weight of the Unit (Without S. S. Stand) : 63.5 Kg Net Weight of the Unit (With S. S. Stand) : 81.5 Kg. As per standards : ISO 105, BS 1006:1990, AATCC 61 (TEST 1 A ONLY),BS EN 20105,MARKS & SPENCER C4, C5 and ,37

1/19/2014 5:40:15 AM

23

Overall Dimen. of the Instru. : 71010 (L) x 41410 (W) x 62810(H)mm Overall Dimen. of the Viewing Cavity : 68510(L)x40810(W)x38010(H) Net Weight of the Instrument : 25.480 Kg. LIGHT SOURCES Art. Daylight Fluorescent Lamps (D-65) : 01 Nos. (18 W) Tungsten Filament Lamps (Inc A Lamps) : 04 Nos. (40 W) Cool White Fluorescent Lamp (CWF) : 01 No. (18 W) Triphosphor Fluorescent Lamp (TL-84) : 01 No. (18 W) Ultra-Violet Black Lamp : 01 No. (18 W) Warm White : 01 No. (18 W) ISO 3664,,BS 950,ASTM D 1729 DIN 6173
1/19/2014 5:40:15 AM 24

Color Matching Cabinet

GSM Cutter The unit is recommended for yield testing i.e. the determination of weight per unit area. The sample cutter cuts out rapidly and accurately circular specimen of 100 Cm2, which is exactly 1 / 100th of a square meter. The result is grams, multiplied by 100, gives the GSM (Grams per square meter) DIRECTLY. Free Pocket weighing scale with G.S.M. cutter.
Grammes per Square Meter = Specimen Weight in Grams x100

1/19/2014 5:40:15 AM

25

Stiffness Tester
Angle of inclination of intersecting plane to horizontal : 41.50 Load on test specimen : 10 + 2 gm / cm length Over All Dimensions of the Instrument : 271(W)x148(D)x200(H) Net Weight of Instrument : 4.500 Kgs.

1/19/2014 5:40:15 AM

26

Martindale Abrasion cum Pilling Tester


SCOPE ABRASION PILLING

No. Of specimens
Exposed area of test specimen Working pressure on test specimen

1-4
6.45 cm2 9 kPa (apparel) 12 kPa (upholstery) 47+2.5 r/min. 32.30 60.5+0.5 mm +0.05 mm

1-4
6.45 cm2 3 kPa (ASTM D 4970) 9 kPa (BS 5690) 12 kPa (BS 5690) 47+2.5 r/min. 32.30 24.0+0.5 mm +0.05 mm

Rotational speed of outer pegs Drive (speed) ratio of Outer pegs: inner pegs Total Stoke of outer and inner pegs Circumferential parallelism of sample holders to abrading tables

1/19/2014 5:40:15 AM

27

Digital Pilling Tester


SPECIFICATIONS : Size of Wooden Boxes (Inside) Thickness of Cork Lining Speed of Rotation of Boxes Size of Test Specimen Size of Rubber Tubes Motor Counter Overall Dimensions of the Unit

: 235 x 235 x 235 mm : 3.2 mm (As per standards) : 60 r.p.m. : 12.5 12.5 cm : 31.5mm (OD) x 25.1mm(ID)x140mm(L) : 1/8 H.P. Single Phase geared motor 220V AC : 5 DIGITS DIGITAL Pre-Set type counter :813 (W) x 482 (D) x 508 mm (H) 32 (W) x 19 (D) x 20 Inch (H) Net weight : 35 kg (77 lbs) As per standards: BS 5811, IS: 10971, IWS 152, M&S P 18
1/19/2014 5:40:15 AM 28

Crockmeter
To determine the colour fastness of textiles to dry /wet rubbing Specification Diameter of the Rubbing Finger : 16 mm Force on the Finger : 9N Size of Crocking Cloth : (5 x 5) Cms Length of the Traverse : 105 5 mm Counter (Re-settable) : 4-Digit Counter Size of Test Specimen : 25 x 5 Cm Overall Dimension of the Unit : 600 (W) x 190 (D) x 200 (H) mm Net Weight of the Unit : 4 Kg. (9 lbs) Construction : Cold-rolled steel 1/19/2014 5:40:15 AM 29

Sublimation Fastness Tester


To determine sublimation of dye due to temperature.

1/19/2014 5:40:15 AM

30

Light Fastness Tester


Light Source :500W, MBTL Fading Lamp(Mercury Blended Tungsten Lamp)

Test Chamber Temperature :Ambient to 50C Temperature Range Control :By Water Circulation in Type A Rectangular Cells. Humidity Control :Inserting Saturated Solution in the type A&C Cells. A Rectangular Cells :12 Nos. C Cylindrical Cells :50 Nos. Space per Type :110 x 50 mm A Rectangular Cells Specimen size:100x50x15 mm Working Life of Lamp :2000 Hours Power :220 Volts, single Phase, 50 HZ,A.C. Supply. Power Consumption :Maximum 1 KW. Water :Use of Distilled Water only in the Water Circulation Unit. Dimension of the Main Unit :400 mm(W) x 500 mm(D) x 190 mm(H) Weight of water circulation unit :6.2 kg. Recommended Ambient :200-240C Temperature (Operating) Conditions 50%-65% Relative Humidity

1/19/2014 5:40:15 AM

31

Perspirometer Frame Construction :Stainless steel Load on the Test Specimen :5 kg. Size of Test Specimen :100 mm x 40 mm Size of Acrylic Separator Plates :115 mm x 60 mm Number of Separator Plates :210Nos. Dimensions of the Unit :225 mm(L)x72 mm(W)x182 mm(H) Net weight of the Unit :8.3 kg.

1/19/2014 5:40:15 AM

32

Fabric Extensioner Over all Dimensions of the Unit Weight of unit :61cmx10cmx12cm(H) :20/500Kg.

1/19/2014 5:40:15 AM

33

Fabric thickness Gauge Specifications Range of measurement : 0-10 mm. Least count of dial Gauge: 0.01 mm. Diameter of anvil : 60 mm. Diameter of pressure foot (Interchangeable):10mm, 25mm. Load on the pressure foot: 78.5 g (100 gm/sq.cm.) Throat depth : 22mm Net weight of the Unit : 340 gms
1/19/2014 5:40:15 AM 34

Shrinkage Template It consists of a fine calibrated Marking Template which is used to mark Fabric with 14 inches bench marks for accurately determining Change in fabrics/garments. After the fabrics/garment is laundered/dry cleaned/washed Processed, the dimensional change can be read directly and accurately In percent change with the calibrated shrinkage scale/rule.

1/19/2014 5:40:15 AM

35

Water Repellency Tester Over all Dimensions of the Unit : 25cmx30cmx55cm(H) This method is aplicable to all fabrics which may or may not have been given a water repellent finish or coating. It is not intended for use in predicting rain penetration resistance of fabrics, since it does not measure penetration of water through the fabric. As per standards : AATCC 22,BS 3702, ISO 4920

1/19/2014 5:40:15 AM

36

Tearing Strength Tester


Capacity : : : 1600 Gms(By Brass pendulum only) 3200 Gms(By adding Augmenting weights at the back) 6400 Gms (By adding Augmenting weights at the front) : 35.5 mm length x 15.5 mm width : 2.50.25mm 43 20 mm 0 to 100% of range At 1600 Gms ,at 3200 Gms. At 6400 Gms. 470(W)x 300(D)x410(H) mm. 18.5 (W)x12 (D)x16(H) Inch.

Clamping surface of each Clamp Distance between clamps Tearing Distance Slit Size Scale reading Calibration check weight Overall Dimensions of Unit

: : : : :

Net wt of the Unit (With check Wt-1600, 3200&6400 Gms) : 29.5Kg.(64.9lbs) As per standards : BS 4153, ASTM D1424, DIN 53862,M & S 29 1/19/2014 5:40:15 AM 37

Crease Recovery Tester SPECIFICATIONS: Size of the Test Specimen Creasing Load Angle Measurement Scale Measurement Material Used Size of the Tester

: : : : : :

40mm x 15mm. 1 Kg. (Stainless Steel) On an Engraved Circular Scale graduated in 1 deg. 0-180 Degrees All Stainless Steel (except base) 9 Kg

As per standards : : ISO 2313,BS EN: 22313,AATCC 66,,ASTM D 1295,IS: 4681


1/19/2014 5:40:15 AM 38

Densimeter To determine E.P.I. and P.P.I. of plain weave fabric.

1/19/2014 5:40:15 AM

39

Sequence Checking Machine A handy instrument used to check the S and Z sequence in the fabric which has battery back up so that we can check the sequence on running loom. Over all Dimension of the Unit :36cmx26cmx15cm(H) Weight of unit :850Gms.

1/19/2014 5:40:15 AM

40

Oven(S.S.) Used for heating and undertaking other oven dry tests in the laboratory.Temp range ambient to 250C. Over all Dimension of the Unit : 45cm(L)x40(W)cmx62(H)cm

1/19/2014 5:40:15 AM

41

Lab Incubator: Temperature ambient minimum 2 c.

1/19/2014 5:40:15 AM

42

ZigZag Cutter Used to cut the samples in zig-zag style of required size. Size of cutting pad : 31 x 28. Size of blade : 50 c.m. Long. Machine dimensions : 31 (d)x 28(w) x 54 (h). Machine weight : 28/500 Kg.

1/19/2014 5:40:15 AM

43

Fabric Inspection Machine SPECIFICATIONS : Power requirements Power readout Machine dimensions View Area Machine weight

: : : : :

230 V AC, 50 Hz, 0.75 KW. Digital display with meter out. 90(w) x 60 (d) x 80 (h) 36 x 72. 260 Kg.

1/19/2014 5:40:15 AM

44

Digital weighing scale Capacity 210 gms Accuracy 0.0001gm

1/19/2014 5:40:15 AM

45

Digital weighing scale Capacity 10 gms Accuracy 0.001gm

1/19/2014 5:40:15 AM

46

Pocket Weighing Scale An economical balance to weigh the samples for checking the GSM of the fabrics. To be used with GSM cutter and also weigh the yarn for checking denier. Capacity 100 gms Accuracy 0.01gm

1/19/2014 5:40:15 AM

47

Yarn Speed & Length Meter


The Length Meter combines the functions of three separate instruments in one, easy-to-use device. It accurately measures the speed and length of yarns, wires and other filaments using a unique "wrapper" roller. This precision roller directs the filament onto the low-inertia, U-grooved measuring wheel to maximize contact and eliminate filament slip and breakage. The Length Meter can also be used as either a contact or non-contact tachometer to measure rotational speeds of shafts, motors, pulleys, etc. or linear speeds of moving surfaces such as conveyor belts, webs of fabric, etc.
1/19/2014 5:40:15 AM 48

Stroboscope
50-12,000 Flashes per minute. AC 220 V Supply

1/19/2014 5:40:15 AM

49

Stroboscope
50-12,000 Flashes per minute. Cable free with battery back up facilities.

1/19/2014 5:40:15 AM

50

Moisture Meter
Moisture content 0-50%, Temperature 10-60 C.

1/19/2014 5:40:15 AM

51

Sound Level Meter


30~130dB

1/19/2014 5:40:15 AM

52

Lux Meter
0-50000 LUX 0-5000 FC

1/19/2014 5:40:15 AM

53

Tachometer
Rotative velocity laser 2.5-99999 r/min, Contact 0.5-1999r/min

1/19/2014 5:40:15 AM

54

Air Permeability Tester


THE Air Permeability Tester is a unique, instrument for determination of the air permeability (or of the pressure drop at a selectable air velocity) and, with some restrictions, of the thickness of fabrics, Nonwoven, felts and films. The main application is paper machine clothing.
1/19/2014 5:40:15 AM 55

Water Permeability
Porosity and water permeability are two distinct terms that describe different characteristics of vascular prostheses. The porosity is a measure of the void fraction within the prosthesis wall and is believed to give a rough prediction of the capacity of the graft to anchor newly formed surrounding tissue after implantation, whereas the water permeability indicates the rate at which water can flow through the prosthesis wall and, when measured under physiological pressure conditions, provides the surgeon with information about the need for preclotting prior to implantation. The literature has not always clearly distinguished between these two terms, and some authors in fact have suggested that they both refer to the same property of a prosthesis. In an attempt to clarify the issue, porosity and water permeability measurements were made on 34 commercial vascular prostheses having different textile constructions. Linear regression analysis demonstrated that these two characteristics are only weakly related (r = 0.59). It is therefore recommended that the current draft standards for such devices reference both properties: porosity and water permeability.
56

1/19/2014 5:40:15 AM

Potrebbero piacerti anche