Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
the larger group from which individuals are selected to participate in a study
Misalnya, penelitian pada perusahaan go publik di bursa efek Jakarta (BEJ). Perusahaan go publik ini kemudian disebut dengan populasi. Bahkan, satu perusahaanpun dapat dikategorikan sebagai populasi, kalau di dalamnya terdapat banyak karakteristik, misalnya gaya kepemimpinan, motivasi kerja, harga saham, ratio keuangan, konflik kerja, minat, hobi, dan sebagainya.
Sampling
The process of selecting a number of individuals for
a study in such a way that the individuals represent the larger group from which they were selected
Sampel merupakan sebagian dari populasi yang akan diketahui karakteristiknya. Ada beberapa alasan pengambilan sample penelitian, yaitu :
Uji coba yang membahayakan. Meningkatkan ketelitian Populasi terlalu besar Meningkatkan Menanggulangi kendala waktu, tenaga dan biaya.
INFERENCE
SAMPLE
study. In terms of an experiment it refers to whether the independent variable really has had an effect on the dependent variable or whether the dependent variable was caused by some other confounding variable. 2. External validity refers to whether the findings of a study really can be generalised beyond the present study. External validity can be broken down into two types. Population validity - which refers to the extent to which the findings can be generalised to other populations of people. Ecological validity - which refers to the extent to which the findings can be generalised beyond the present situation.
Steps in sampling...
1. Define population (N) to be sampled 2. Determine sample size (n) 3. Select sample
a. Random error b. Systematic error (sample parameters is different from population parameters) Bias sampling (non random sampling) a. Researcher preference b. Methodological bias
(generalization rate) Metode statistik yang akan digunakan (parametrik / nonparametrik) Kemampuan peneliti (waktu, tenaga, biaya, dan perijinan).
called the target population (the ideal selection) oftentimes the accessible or available population must be used (the realistic selection)
larger samples are more likely to detect a difference between different groups smaller samples are more likely not to be representative
3. If the population size is around 500 (give or take 100), or 50% should be sampled. 4. If the population size is around 1500, 20% should be sampled. 5. Beyond a certain point (N = 5000), a sample size of 400 may be adequate.
TEKNIK SAPLING
Non-probability sampling
Accidental sample Subjects who happen to be encountered by researchers Example observer unfair practice in a general election. Quota sample Elements are included in proportion to their known representation in the population Snowball sampling a useful technique in situations where one cannot get a list of individuals who share a particular characteristic. It is useful for studies in which the criteria for inclusion specify a certain trait that is ordinarily difficult to find. It relies on previously identified members of a group to identify other members of a population. As one member was identified, he or she gave the names of the others to contact. Purposive/criterion/convenience sample Researcher uses best judgment to select elements that typify the population Example: Interview all burglars arrested during the past month
SNOWBALL SAMPLING
Probability Sampling
1. Simple random sample. 2. Stratified random sample. Proportional Disproportional 3.Cluster(multistage) sample 4.Systematic sample
1. Simple random sampling: the process of selecting a sample that allows individual in the defined population to have an equal and independent chance of being selected for the sample.
Online link : www.random.org/nform.html
5. Select an arbitrary number in the table of random numbers. 6. For the selected number, look only at the number of digits assigned to each population member.
7. If the number corresponds to the number assigned to any of the individuals in the population, then that individual is included in the sample. 8. Go to the next number in the column and repeat step #7 until the desired number of individuals has been selected for the sample.
advantages easy to conduct strategy requires minimum knowledge of the population to be sampled
disadvantages need names of all population members may over- represent or under- estimate sample members there is difficulty in reaching all selected in the sample
2. Stratified sampling: the process of selecting a sample that allows identified subgroups in the defined population to be represented in the same proportion that they exist in the population. Stratified random sampling: involves dividing the population into subgroups , and then random samples are chosen from these groups. Eq. Managers in service industries in BEI
Proportional stratified sampling, samples are chosen from each stratum, and these samples are in proportion too the size of that stratum in the total population. Stratified random sampling achieves a greater degree of representativeness with each subgroups, or stratum, of population. Disproportional stratified sampling: When strata are unequal in size. May be used to ensure adequate samples from each stratum.
4. Classify all members of the population as members of one identified subgroup. 5. Randomly select, using a table of random numbers) an appropriate number of individuals from each of the subgroups, appropriate meaning an equal number of individuals
advantages more precise sample can be used for both proportions and stratification sampling sample represents the desired strata
disadvantages need names of all population members there is difficulty in reaching all selected in the sample researcher must have names of all populations
3. Cluster sampling: the process of randomly selecting intact/all groups, not individuals, within the defined population sharing similar characteristics Eq. Going public companies in BEI are consisted of many industrial types; managers in banking industries; etc.
not individuals randomly selected. Cluster sampling is used for convenience when the population is very large or spread over a wide geographical area. Selection of individuals from with in clusters may be performed by random or stratified random sampling.
6. Determine the number of clusters needed by dividing the sample size by the estimated size of a cluster. 7. Randomly select the needed number of clusters by using a table of random numbers. 8. Include in your study all population members in each selected cluster.
advantages efficient researcher doesnt need names of all population members reduces travel to site useful for educational research
disadvantages fewer sampling points make it less like that the sample is representative
4. Systematic sampling: the process of selecting individuals within the defined population from a list by taking every K th name.
the population are selected from a list by taking every ( Kth) individual. The "K", which refers to a sampling interval, depends on the size of the list and desired sample size. After the first individual is selected, the rest of the individuals to be included are automatically determined.
5. Start at some random place in the population list. Close you eyes and point your finger to a name. 6. Starting at that point, take every Kth name on the list until the desired sample size is reached. 7. If the end of the list is reached before the desired sample is reached, go back to the top of the list.
disadvantages all members of the population do not have an equal chance of being selected the Kth person may be related to a periodical order in the population list, producing unrepresentativeness in the sample
sampling, except that the desired number of elements for each stratum are selected through convenience sampling.
because samples need to be small and many potential participants are unwilling to undergo the demands of participation, most qualitative research samples are purposive
True or false
the size of the sample influences both the representativeness of the sample itself and the statistical analysis of study data
true
True or false
both quantitative and qualitative researchers who use samples must provide detailed information about the purposive research participants and how they were chosen
true
True or false
True or false
the important difference between convenience sampling and purposive sampling is that, in the latter (purposive sampling), clear criteria guide selection of the sample
true
True or false
a good sample is one that is representative of the population from which it was selected
true
True or false
a table of random numbers selects the sample through a purely random, or chance, basis
true
True or false
qualitative research uses sampling strategies that produce samples which are predominantly small and nonrandom
true
the extent to which the results of one study can be applied to other populations or situations
generalizability
identified subgroups in the population are represented in the same proportion that they exist in the population
stratified
selecting a few individuals who can identify other individuals who can identify still other individuals who might be good participants for a study
snowball
selecting participants who permit study of different levels of the research topic
intensity
selecting by random means participants who are selected upon defined criteria and not who are too numerous to include all participants in the study
random purposive
all individuals in the defined population have an equal and independent chance of being selected for the sample
random
a sampling process in which individuals are selected from a list by taking every Kth name
systematic
www.surveysystem.com/sscalc.htm
Confidence Interval 5 Confidence Level 95%
5,000
10,000 50,000 100,000 1,000,000
5
5 5 5 5
95%
95% 95% 95% 95%
357
370 381 383 384
68
TEKNIK SAPLING
Snowball sampling
a. Random error b. Systematic error (sample parameters is different from population parameters) Bias sampling (non random sampling) a. Researcher preference b. Methodological bias