Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
WIRE
A wire is a single, usually cylindrical, elongated strand of drawn metal. Wires are used to bear mechanical loads and to carry electricity and telecommunications signals. Standard sizes are determined by various wire gauges.
Stranded wire
Braided wire
Often used as an electromagnetic shield in noise reduction cables and as a wire conductor (like in coaxial cables)
COAXIAL CABLE
Coaxial cable is an electrical
cable consisting of a round conducting wire, surrounded by an insulating spacer, surrounded by a cylindrical conducting sheath, usually surrounded by a final insulating layer (jacket). It is used as a high frequency transmission line to carry a high-frequency or broadband signal.
Coaxial Cable
Coaxial connectors
RIBBON CABLE
A ribbon cable (also known as multi-wire planar cable) is a cable with many conducting wires running parallel to each other on the same flat plane. Used in low voltage applications where several wires are needed Very flexible Often used in digital equipments.
Datacom, Telecommunications
Much like the ST connector but with a ferrule that is half the
size. High Density
MT-RJ Connector
Power cables are solid or stranded conductors surrounded by insulation, shielding, and a protective jacket. These cables are designed for high voltages (>600 V). Generally the power cables are rated Low Voltage (<1kV), Medium Voltage (6-36 kV), and High Voltage (>40 kV). Important cable performance specifications are include number of conductors, nominal outer diameter, rated voltage, rated amperage, and operating temperature. The number of conductors is the number of insulated conductors in the cable. The nominal outer diameter is the diameter of the cable or wire including insulation and jacket.
Important cable construction parameters are cable jacket, cable shielding, cable insulation, and cable conductor. Choices for cable jacket include chlorinated polyethylene (CPE), chlorosulphonated polyethylene (CSPE), and polyvinyl chloride (PVC).
Cable shielding is a metallic layer placed around an insulated conductor or group of insulated conductors, to prevent electrostatic or electromagnetic interference between the enclosed wires and external fields. Cable shielding choices for power cables include copper tape, copper wire shield, and no shield.
Cable insulation cross linked polyethylene (XLPE), ethylene propylene rubber (EPR), polyethylene (PE), and polyvinyl chloride (PVC). A cable conductor is a wire or combination of wires not insulated from one another, suitable for carrying electric current.
Left: submarine cable with all layers shown Top right: cable laying vessel and the crew at work
HVDC submarine power cable link between Mussalo and Kernovo
Slide 14 of 21
Cable Gland
Cable glands are typically single-cable bulkhead modules that allow barrier penetration while providing sealing and strain relief. They are sometime configurable to work with any cable within a specified size range.
Cable Lug
A copper or brass fitting to which electrical wires/cables can be soldered or otherwise connected.
Cable Tray
Battery Terminals
Audio/video connector
Molex connector
DIN Connector
USB connector
DE 9 connector
VGA Connector
Electrical Plug
Electrical Box
Electrical Enclosures
Electrical Enclosures
Electrical enclosures
THANK YOU