Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
ZTE University
Objectives
Be Familiar with LTE Networking Architecture Master System Architecture Know ZXSDR R8882s Highlights Master Technical Specification Know the Maintenance Method
Contents
LTE Distributed Base Station Solution System Architecture System Highlights Technical Specifications Operation and Maintenance
Location in Network
Networking
Contents
LTE Distributed Base Station Solution System Architecture System Highlights Technical Specifications Operation and Maintenance
Physical Structure
Front View
Rear View
Mechanical Dimension : 380 mm x 320 mm x 140 mm (H x W x D) Volume: 17 L Weight: 18 Kg Color: silver gray
External Interface - 1
External Interface - 2
No 1 2 3 4 5 6 7 Label PWR MON AISG OPT1 OPT2 ANT4 ANT3 Interface Power interface/1 dry contact 485 Serial /2 dry contacts AISG device interface eBBU and eRRU Interfaces eBBU and eRRU Interfaces Interface to RF cable (TX/RX) Interface to RF cable (RX) Interface type / connector DC interfaceConnector XCG18T4K1P101+XC18FJJP1-10.5 Section area of cable is 1.5 mm2 8-cores socket (IEC 60130-9-ED) 8-cores aviation socket LC type optical interface LC type optical interface 50 Ohm DIN-7/16 Connector 50 Ohm DIN-7/16 Connector
Grounding Terminal
ANT2
10
ANT1
11
LMT
Indicators Status - 1
Indicators Status - 2
Name RUN Color Green Meaning Running status Working mode Always ON: reset or CPU problem Continuous blinking: product is in booting process blinking every 1Hz: product working status is good blinking every 5Hz: during version downlink process OFF: product powered off or power supply failure OFF: There is no alarm Always ON: product is in booting process Blinking every 5Hz: There are vital or urgent alarms Blinking every 1Hz: There are normal or minor alarms Always ON: Physical link is good, logical link is abnormal OFF: Physical link is abnormal Blinking every 1Hz: Interface is in good status Always ON: Physical link is good, logical link is abnormal OFF: Physical link is abnormal Blinking every 1Hz: Interface is in good status OFF: RF channel is in good status Always ON: There are VSWR alarms OFF: RF channel is in good status Always ON: There are VSWR alarms
ALM
Red
Alarm indicator
OPT1
Green
OPT2
Green
VSWR1
Red
VSWR2
Red
RF channel indicator
The grounding cable of ZXSDR R8882 L268 is made up of strands of flame-retardant wire. The cross sectional area of grounding cable is 25 mm 2.
Signal Description Dry contact input, negative polarity Dry contact input, negative polarity Dry contact input, negative polarity Dry contact input, negative polarity Positive RS485 bus signal Positive RS485 bus signal Positive RS485 bus signal
End A is circular 8-core plug and end B is made depending on actual conditions.
End A Appearance
PIN8
Black
PIN5
PIN6 PIN7 PIN1, PIN2, PIN4, PIN8
PIN2
PIN3, PIN4 PIN5, PIN6 -
RS485A
DC DC RTN NC
RS485+
DC output DC RTN Null
Hardware Structure
DFL (Duplex Filters LNA) 2xPA40 (Power Amplifier) RPDC (RRU Power for DC)
Software Structure
OAM RFS
Application
OSS
OSDriver &Support
VxWorks
BSP
Hardware
Hardware System
Contents
LTE Distributed Base Station Solution System Architecture System Highlights Technical Specifications Operation and Maintenance
Highlights
Multi-Mode eRRU
ZXSDR R8882 L268 is fully software defined. and it supports multimode at the same frequency band simultaneously. Therefore, it fully satisfies operators requirements of hybrid network deployment and long term evolution with lowest cost. ZXSDR R8882 L268s PA efficiency can reach up to 30% thanks to the most advanced Doherty PA, DPD linear technology and MCPA technology. It supports dynamic adaptive PA power supply due to the output power, which reduces power consumption. It is passive thermal dissipation designed, so it is power saving and less noisy. ZXSDR R8882 L268 supports 2T4R in one box, which can optimize spectrum efficiency greatly and improve network uplink performance. As a result, it brings better customer experience.
Functionality
Supports the configuration of 5 MHz, 10 MHz, 15 MHz and 20 MHz scalable bandwidth. The hardware can maximally supports continuous or discontinuous 20 MHz in total 30 MHz bandwidth. Supports 2500 MHz~2570 MHz(uplink)/2620 MHz~2690 MHz(downlink). Supports 2T4R in one box which can optimize spectrum efficiency greatly and improve network uplink performance. Supports QPSK,16-QAM,64-QAM modulation in both downlink and uplink. Supports transmit power report function for every carrier. Supports overload protection function for power amplifier. Supports transmit channel switching on/off function. ZXSDR R8882 L268 software failure will not affect the running of eBBU and other ZXSDR R8882 L268s which are connected to it.
Contents
LTE Distributed Base Station Solution System Architecture System Highlights Technical Specifications Operation and Maintenance
Operation Frequency Band 2500 MHz~2570 MHz(uplink) / 2620 MHz ~2690 MHz(downlink) Output Power Receiver Sensitivity TOC : 2x40 W bandwidthMHz 5/10/15/20 Reference sensitivity power level dBm -104
Channel
Item
Power Requirements
Value
Power supply -48V DC (-37~-57V DC) grounding resistance 5 Maximum power consumption: 330 W
Power Consumption
Ground
Item
MTBF MTTR Availability index Down duration 340000 hours 0.5 hour 99.999842% 0.83 min/year
Indices
Contents
LTE Distributed Base Station Solution System Architecture System Highlights Technical Specifications Operation and Maintenance