Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Review
commissioning,
interface and
License
service
commissioning,
commissioning
and
that
ultimately bring the system into normal operation after the hardware installation and software installation .
Objectives
Upon completion of this course,you will be able to: Master the loading commissioning,
References
31041209-BSC6800
Installation
Manual
System
Commissioning (V1.20)
Course Contents
Overview
Loading Commissioning
Feature Commissioning Interface and Service Commissioning
Prerequisite
Checking Hardware
Checking Software Checking Network
Prerequisite
Prerequisite
Y[ ] N[ ]
SQL Server
Y[ ] N[ ]
Y[ ] N[ ]
SQL Server started? BAM version right? BAM Server started? Files to be loaded in specified directory? LMT version right?
Y[ ] N[ ] Y[ ] N[ ] Y[ ] N[ ] Y[ ] N[ ] Y[ ] N[ ]
Prerequisite
2 3
Y[ ] N[ ] Y[ ] N[ ]
Y[ ] N[ ]
External network
Y[ ] N[ ]
Procedure
Loading commissioning
Feature commissioning
End
Course Contents
Overview
Loading Commissioning
Feature Commissioning Interface and Service Commissioning
Introduction
Generatedata f iles
Check loading
End
Introduction
WMPU Other boards in WRSS WRSS Program files Data files BAM Boards in WRBS WMUX/WSPU WRBS
Carry out SET WMPUIP to set the external IP address of the WMPU
Route No.
1 2
Network address
80.0.0.0 192.1.0.0
Netmask
255.0.0.0 255.255.0.0
Gateway address
10.121.A.C 10.121.A.C
Interface
10.121.A.B 10.121.A.B 1 1
Metric
The program files have come into being in the BAM Server since BAM software installation. You need generate the data files for loading
You may prepare a Man Machine Language (MML) script of the configuration data (data script) and then generate data
checking Data script Data Script Execution Carry out FMT DATA to generate the data files for loading
Host software
WHPU
To load a data file to the WRSS is right to load BNET.dat to the WMPU
WSPU
WSPUb WFMR WXIE WOSE/WOME WBIE/WTIE
B00SPU0.bin
B00EPU0.bin B00FMR0.bin, B00FMR0.dsp B00XIE0.bin B00OIE0.bin B00BIE0.bin
Such data files include the configuration data that will be stored on the WMUX or on the WSPU
Carry out SET LODPARA . Select "WRSS or "WRBS" FLASH)" for [Host code load control]
for
The program files will be loaded from the BAM Server and written to the Flash Memory of the corresponding boards when
Checking Loading
The BSC6800 contains two sets of configuration parameters that respectively exist in FAM and BAM. They are both in tables
Carry out ACT CRC to check the data consistency on table level Carry out CMP TBLDATA to check the data consistency on record level
Course Contents
Overview
Loading Commissioning
Feature Commissioning Interface and Service Commissioning
Introduction
No. 1 2 3
4
5 6 7 8
AMR control
Introduction
10
TFO/TrFO
TFO: Speech information is not coded using code converter if UEs in a mobile-to-mobile call support the same code type as the network. TrFO: The BSC6800 involved in a mobile-to-mobile call supports speeches or multimedia services in TrFO mode. Bandwidth resources can be allocated flexibly to satisfy the requirements of burst PS services. The services can be handed over between dedicated and common channels so that the resources can be fully utilized. On setup of an Radio Resource Control(RRC) connection, the BSC6800 can specify a cell for the User Equipment(UE) to access according to the resource status to increase the access success rate. Message trace and interpretation on standard Iub, Iur, Iu and Uu interfaces, single subscriber trace and cell trace Cell broadcast service
11
12
Direct retry
13 14
Introduction
Commissioning Procedure
Start
End
Import a correct License file as prompted during BAM installation Otherwise, copy the License file to the following directory:
Carry out SET OFFLINE to switch to the offline mode, and then
reconfigure the RNC ID and PLMN ID accordingly
If the BSC6800 has no basic information, carry out ADD RNCBASIC to add the RNC ID and PLMN ID If the basic information of the BSC6800 is not authorized in the License file, carry out MOD RNCBASIC to modify the RNC ID and PLMN ID as those presented in the License file
Carry out ACT LICENSE to activate license file. BAM will check validity of the file. If valid, the file will be written into the memory of
BAM
To activate the License function in the FAM, carry out RST SYS to reset the BSC6800 system
Carry out SET ONLINE to switch to the online mode Carry out ACT LICENSE to activate license file. BAM will check validity of the file. If valid, the file will be written into the memory of BAM
Carry out SET CORRMALGOSWITCH to set an algorithm switch You may set the following classes of algorithm switches using the command:
Course Contents
Overview
Loading Commissioning
Feature Commissioning Interface and Service Commissioning
Introduction
You need also perform commissioning for interface data and dialtests for system services before you put the BSC6800 into normal service
Local loop
Set the loopback type of a test E1/T1 link as LOCAL on a LMT using:
SET E1T1LOP if the E1/T1 link is on an E1/T1 trunk SET SDHLOP if the E1/T1 link is on an SDH
Carry out LOP E1T1 on the LMT to initiate a local loopback test for the E1/T1 link Set the loopback type of the test E1/T1 link as NOLOOP on the LMT When performing a loopback test for an E1/T1 link in an IMA group, be
sure to carry out RST IMAGRP to reset the IMA group after the loopback
test
Combined loop
Set the loopback type of a test E1/T1 link as REMOTE in the operation and maintenance system at the peer end Carry out LOP E1T1 on a LMT to initiate a combined loopback test for the E1/T1 link.
Carry out DSP SAALLNK to check that all Signaling ATM Adaptation Layer (SAAL) links are available
Carry out DSP IUBP to check that the NCP link and all CCP links are
available
Carry out DSP AAL2ADJNODE to check that the adjacent node of NodeB is available
Carry out DSP AAL2PATH to check that the AAL2 path(s) to a specified adjacent node is/are functional
Iu Interface Commissioning
Carry out DSP SAALLNK to check that all SAAL links are available. Carry out DSP MTP3BLNK to check that all MTP3b links are available. Carry out DSP SSN to check that all SCCP subsystems are available.
You need also check that the IP routes of the BSC6800 to other Radio Network Controllers (RNCs) are available for supporting lossless relocation. Carry out PNG IPADDR on a LMT to check the
Service Commissioning
Voice service
CS streaming service
PS service
Activate 384-kbit/s and 144-kbit/s services and perform download some data using FLASHGET on a UE for half an hour.
Perform CS voice service handover fifty times. Perform PS service handover fifty times. Perform switchover for the WMPUs, WMUXs and WSPU/WSPUbs fifty times during service
Service Commissioning
Feature
Dial-test method
Expected results The connection success rate is above 90%. The calls sound clear. There is no loud noise in the calls.
Inter-RAT handover
Hand over a dual-mode UE from UMTS to GSM and back fifty times.