Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
ACTIXRVS
WHAT IS ACTIX ?:
A post-processing tool for GSM, GPRS, UMTS, CDMA-one, CDMA2000 and IS-95.
WHY ACTIX?
ACTIX, as a network optimization platform, is a powerful tool that will allow you to discover, locate, manage, troubleshoot and find solutions of your network problem. You just have to know what you are looking for.
Actix Module 2
OVERVIEW
1.
2. 3. 4. 5.
INSTALL ACTIX
CONFIGURE ACTIX MENU ACTIX USE ACTIX OPTIMIZATION
Actix Module 3
Actix Module 4
OVERVIEW
1.
INSTALL ACTIX
2.
CONFIGURE ACTIX
1. 2. 3.
3. 4. 5.
Actix Module 5
2-CONFIGURE ACTIX
Input files:
Data: sd5(Nitro file), cait, mdm, txt, mdb and others. Maps: tab, wor, gst(MapInfo), atr(tiled rasters) Site database: cellrefs.txt
Actix Workspace:
Actix Module 6
Several traces can be loaded and monitored simultaneously. Each of your loaded trace should contain 3 major folders of parameters(even more if you have used 2-3 mobiles to collect traces): Sd5_Survey Samsung 3GPP_1 Samsung 3GPP_2 E6455C( IMT2000 receiver)
Actix Module 7
>
After loading all the files your workspace looks like this:
2 measurements. Superstream
Actix Module 8
Step 3. Like Mapinfo you can play with your layers,add layers more,reorder,export etc
step1
step3
step2
Actix Module 9
All rights reserved 2002, Alcatel
Right click on the map window and you may choose among one of the following menus:
Actix Module 10
The Site file is a txt file. He must be in a special format in order to load it each time you open ACTIX.
Actix Module 11
OVERVIEW
1. 2.
3.
MENU ACTIX
1. 2. 3. 4. 5. 6. 7.
4. 5.
Actix Module 12
3.1-USE ACTIX-MENU-File
>
>
> > > > > >
Actix Module 13
3.2-USE ACTIX-MENU-View
> > > > > >
Screen layout: Save/Open screen layout. Display message browser: browse all message of one device.(not describe here). Display New Map: Will open an empty Map window. Display on Map: display parameter on a map Display on Chart:display parameter on a chart Display on Table: display parameter on a table
>
>
>
>
>
Actix Module 14
3.2-USE ACTIX-MENU-View-Forms
>Pre-configured
>
UMTS Data Event Navigator: PDP activ,deactiv,GPRS attach,GPRS RAU UMTS Data Session:instant throughput in UL and DL UMTS Throughput: graph throughput during the call
>
>
>
>
>
UMTS UE Call Information:instant values IMSI, caller ID, calling ID, call sate, LAC RAC
You can create your own form
Actix Module 15
Actix Module 16
-UMTS Drive test Summary: idem CPICH Level -Call Setup Failure Analysis:Last1stBest servingSC,
5sec Avg 1stBest Ec/Io,5sec Avg 1st best RSCP, 5 sec Avg UE TX Power, Saw Setup Msg in Time,Due to RRC Connection reject,RRC Connection release beofre Call setup, disconnect Cause, RRC Release Cause,Due to Pillot Polution, Due to Interference, Due to Poor DL Coverage, Due to Poor UL Coverage, Due to Coverage Limitation, Due to Missing Neighbor
Actix Module 18
You can define your own analysis as a query. Not see in this presentation.
Actix Module 19
All rights reserved 2002, Alcatel
Open Report/Workbook: You can add a predefined report( made by you not in the
package delivered by Actix) for example the one that we are currently using for site verification report. The report It is usually an Excel file and requires special *.caf files in order to run. To see in this training.
>
Cells:
Get all the data you need about sites and cells:LAC, CID, EIRP,BSIC,SC etc Change CellRef file
Actix Module 20
Actix Module 21
Or edit existing
Actix Module 22
>
Event Diagram
Actix Module 23
Thresholds :
>
Preferences :
You can edit or find out what each threshold means(used to generate events,analyses and statistiques):
Actix Module 24
OVERVIEW
1. 2. 3.
4.
USE ACTIX
1.
2.
3. 4. 5. 6. 5.
DISPLAY PARAMETERS DISPLAY EVENTS CORRELATE WINDOWS & REPLAY MEASUREMENTS TABLE, WORKBOOKS, GRAPHS, CHARTS FAVORITE SAVING YOUR WORK AND YOUR SETTINGS
OPTIMIZATION
Actix Module 25
DISPLAY PARAMETERS:
You should ask questions
-Scanner or Mobile? -UL or DL? -When and Why occurred? -To whom it was addressed? -Who sent the message? -Why was sent? -CCH or DCH? -Parameter or Event? -Key parameters of the message? -On RRC?
Actix Module 26
ype2(inter-frequency) type3(inter RAT) type4 traffic( FACH to DCH) type5 type6 (UE internal measurements: RX-TX time difference for outer loop power control, power balancing measurements)
-always follow the mobile state: idle, connected etc and also the call steps:
RRC Con Req.,RRC Con. setup,RRC Con setup complete,service request, service accepted, authentication request, authentication accepted, security command, security complete, CC setup, CC call proceed, RB setup, RB setup complete, CC alert, CC Connect.
Actix Module 27
4.3-USE ACTIX-TABLES
Parameter(s) can be displayed on a table:
Step1: Select parameter Step2:right click on it Step3: display on table Step4: select next parameter Step5: drag&drop it on the same table Step6: and so on.. Available sheets: Series,histograms and statistics
Can NOT be saved as Excel but for this There is another feature as presented on the next slide
Actix Module 28
Actix Module 29
4.4-USE ACTIX-CHARTS
Parameter(s) can be displayed on a chart:
Step1: Select parameter Step 2: right click on it Step3: display on chart Step4: select next parameter Step5: drag&drop it on the table
Actix Module 30
Favorites: we already discussed about forms, analysis, states Another trick that you will probably use is: monitor a list of KPI given by the RNO manager. For this you select the parameters on the left size, right click on it and choose add to favorites. Do the same for all KPI. You are lucky because you do this just once. Every new trace you will load will have a quick view ONLY of this parameters in the favorites sheet( it is on the bottom side of your screen, left corner)
Actix Module 31
Dont forget
Save your Workspace. Save your settings for legends, favorites, special queries.
Actix Module 32
OVERVIEW
1. 2. 3. 4.
5.
OPTIMIZATION
Actix Module 33
5- Optimization
4. Optimization Actions
5. Conclusion
Actix Module 34
Exercices:
> >
Coverage attribute Quality attribute Call drop/ Call setup fail (parameters are in Favorite )
> > > > > >
Made a statistic report. Display on a table, on a chart, workbook, Change the legend. Export a map Launch an analyse, Open a form, protocol stack.
Actix Module 35
Thank You